02/EDCB/2024-25

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-II, Bareilly. Approx. distance upto 80 Km. Including safe loading and unloading.

PCC Pole 8.5 meter long.

STP 9 Mtr Long

STP 11 Mtr Long

Other Line material (Except Pole) i.e., cross arm/ conductor/ pin insulator/stay/earthing rod/Disc Fitting/Disc Insulators/11 KV XLPE/LT XLPE Cable etc

11/0.4 KV 1 Phase 10/16 KVA T/F

11/0.4 KV 3 Phase 25 KVA T/F

11/0.4 KV 3 Phase 63 KVA T/F

11/0.4 KV 3 Phase 100 KVA T/F

11/0.4 KV 3 Phase 250 KVA T/F

11/0.4 KV 3 Phase 400 KVA T/F

11 KV Pilfer proof Metering cubical and CT PT Unit

33 KV Pilfer proof Metering cubical and CT PT Unit

33 KV Line Isolator 800 Amp

33 KV VCB 800 A, 750 MVA

33 KV Control Panel for Single Transformer

33 KV Control Panel for Double Transformer

11 KV Bus Cupler

33 KV CT 200/100/1-1A

33 KV Lightening Arrestor

Erection of new PCC Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

PCC Pole 8.5 Mtr Long Single Pole

PCC Pole 8.5 Mtr Long Double Pole

ST Pole 9 Mtr Long Single Pole.

ST Pole 9 Mtr Long Double Pole.

ST Pole 11 Mtr Long Single Pole.

ST Pole 11 Mtr Long Double Pole.

Grouting with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

PCC Pole 8.5 Mtr Long Single Pole

PCC Pole 8.5 Mtr Long Double Pole

ST Pole 9 Mtr Long Single Pole.

ST Pole 9 Mtr Long Double Pole.

ST Pole 11 Mtr Long Single Pole.

ST Pole 11 Mtr Long Double Pole.

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Dismantling of Old and damaged conductor complete in all respect

Dismantling of PCC/ST Pole due to line shifting/damaged complete in all respect

Dismantling of Existing Distribution Transformer for increasing capacity/Shifting complete in all respect

11/0.4 KV 3 Phase 25 KVA T/F

11/0.4 KV 3 Phase 63 KVA T/F

11/0.4 KV 3 Phase 100 KVA T/F

11/0.4 KV 3 Phase 250 KVA T/F

11/0.4 KV 3 Phase 400 KVA T/F

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal Conductor

ACSR Rabbit Conductor

ACSR Dog Conductor

3 Phase Arial Bunched Conductor

1 Phase Arial Bunched Conductor

LT XLPE 1x630 Sqmm

LT XLPE Cable 3.5x70 sqmm

After Mounting of CT PT unit on double pole, laying of 50 Mtr 11 KV 3cx70 sq mm cable in single circuit on river sand form Double Pole to metering room complete in all respect. Alongwith filling of cable jointing kits

After Mounting of CT PT unit on double pole, laying of 50 Mtr 33 KV 3cx120 sq mm cable in single circuit on river sand form Double Pole to metering room complete in all respect. Alongwith filling of cable jointing kits

Under ground laying of Following cable in Single circuit on river sand to Double pole situated at both sides of road complete in all respect. Minimum depth should be 0.75 Mtr and cable should be covered by bricks from three sides. Alongwith filling of cable jointing kits

11 KV XLPE Cable Size 3x70 sqmm

11 KV XLPE Cable Size 3x120 sqmm

11 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x120 sqmm

33 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x300 sqmm

Under ground laying of Following cable in Single circuit by drill method to Double pole situated at both sides of NH/SH/Railway Crossing complete in all respect. Alongwith filling of cable jointing kits

11 KV XLPE Cable Size 3x70 sqmm

11 KV XLPE Cable Size 3x120 sqmm

11 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x120 sqmm

33 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x300 sqmm

Hoisting of Following size 11 KV & 33 KV XLPE Cable on double pole with GI pipe of size 6 " dia 4 Mtr long including the jumpering complete with clamps , nut and bolts.

11 KV XLPE Cable Size 3x70 sqmm

11 KV XLPE Cable Size 3x120 sqmm

11 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x120 sqmm

33 KV XLPE Cable Size 3x185 sqmm

33 KV XLPE Cable Size 3x300 sqmm

Filling of 11 KV Outdoor Cable Boxes For 3x185 sqmm XLPE Cable

Supply & Laying of 6" dia G Pipe at various places i.e road crossing & Hoisting etc. complete in all respect ((ISO certified GI pipe 150 NB 3 mm thick dia 6" would be Provided by contractor at his own cost)

Supply & Laying of 140 mm OD PN-4 PE-80 Grade UV Sabilized HDPE Pile as per IS 4984 in 6 meter (would be Provided by contractor through approved vendors of Discom at his own cost)

Construction of T/F plinth 1.5x1.5x2 m3 for mounting 250/400 KVA T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4” thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect All manpower, material and T&P provided by the contractor to complete the work.

Cage fencing of 250/400 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattle accidents by fabrication of cage (1 Inch Sq wiremesh) made of 10 No gauge in suitable size angle iron frame of size 7.5'(L)x5'(W)x8’(H) by strengthening of wire mesh 20x3 mm M.S. flat horizontally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint). The wire mesh should be earthed with 50x6 mm MS earthing strip with existing earthing of Transformer Body. All manpower, material and T&P provided by the contractor to complete the fabrication, transportation and installation.

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Installation of 11 KV Fuse Set

Fixing of 11 KV TPMO

Installation of 11 KV Pilfer Proof Metering Cubicle in metering room complete in all respect

Installation of 33 KV Pilfer Proof Metering Cubicle in metering room complete in all respect

Installation of LT Incoming Panele with metering eauipment & fixing arrangement for LT Circuit Deistribution complete in all respect as per norms

Mounting of Following Capacity Transformers as per norms complete in all respect -

10/16 KVA T/F

25 KVA T/F

63 KVA T/F

100 KVA T/F

250 KVA T/F

400 KVA T/F

Fixing of Distribution Box complete in all respect

Guarding at road crossing complete in all respect

Fixing of Following Material as per Norms complete In all respect

33 KV Line Isolator 800 Amp

33 KV VCB 800 A, 750 MVA

33 KV Control Panel for Single Transformer

33 KV Control Panel for Double Transformer

11 KV Bus Cupler

33 KV CT 200/100/1-1A

33 KV Lightening Arrestor

Plinth & Foundation for 33 KV VCB as per norms complete in all respect

Supply & Fixing of Following Items to complete the work (Provided by the contractor through approved vendon of Discom/UPPCL, If Not available in stores)

LT Clamps as per RESSPO Norms for PCC/ST pole

Nut & Bolt off size

F Clamp as per RESSPO Norms

Shackle Insulator as per RESSPO Norms

X-Arm Holding Clamp as per RESSPO Norms

Holding Clamp For T-Off

Holding Clamp For G I Pipe

Clamps with Nut & Bolt for Top & Dropper Channel

Stay Clamps as per RESSPO Norms

11 KV Composite Polymer Disc insulator as per RESSPO Norms

Top Channel of size 100x50x2240 mm as per RESSPO Norms

T off Channel as per RESSPO Norms

11 KV Pin Insulator as per RESSPO norms

11 KV Pin Insulator with Pin & Nut as per RESSPO norms

11 KV Pin with Nut as per RESSPO norms

11 KV Disc Insulator With Fitting

Stone Pad

11 KV Steel X Arm V-Type

Danger Board

Danger Board Barbed Wire Including Jumper

Aluminium Paint

Red Oxide Paint

Barbed Wire

LT Shackle Insulator

PG Clamp

11 T-Off (125x65x1300mm)

11 KV Disc Fitting With Insulator (45 KN (T&C Type)

Guarding Angle 65x65x6 mm 1.6 Mtr Long

Clamp For Guarding Angle with Nut & Bolt

GI Wire 6 SWG & 10 SWG For Guarding & Lacing

Nut & Bolt with Washer

MS Angle Iron 65x65x6 mm, 2700 mm long Bracing with 4 Clamp

J-Huck

Suspenstion Clamp

Piercing Connector

Al Lug 630 Sqmm

Safe back carriage of Scrap (if any) from work site to C.B. Ganj store Bareilly approx distance upto 80 Km including safe loading & unloading.

Safe back carriage of Distribution Transformer from work site to C.B. Ganj store Bareilly approx distance upto 80 Km including safe loading & unloading.

11/0.4 KV 3 Phase 25 KVA T/F

11/0.4 KV 3 Phase 63 KVA T/F

11/0.4 KV 3 Phase 100 KVA T/F

11/0.4 KV 3 Phase 250 KVA T/F

11/0.4 KV 3 Phase 400 KVA T/F

Cutting of Tree Branches

BHARAT ELECTRICAL TRADERS

ASTHA TRADERS

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER