Construction of 6 Nos Type-III, 6 Nos Type-II and 6 Nos Tyep-I staff Quarter near CMO residence at Dharamsala in District Kangra, (H.P.) Deposit work

Amount

Providing and fixing 12mm(Twelve milimetres) thick preliminated board Parker or its equivalent ISI marked IS 1003 both side BWP Phenol bounded exterior/interior grade shutters with 40mm(Forty milimetres) frame of first class deodar wood for doors including bright finished/black enameled iron butt hinges with necessary screws within all leads, lifts of materials and other incidentals, as per drawing & design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of 0.56mm (Zero decimal five six milimetres) diameters for doors, windows and clerestory windows including bright finished /black enameled iron hinges with screws within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof termite resistant commercial board Parker or its equivalent shutter with hard wood edging and all cut portions of the shutter have Six millimetres and twelve millimetres thick hard wood edging for cup board fixing with nickel plated piano hinges within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board Parker or its equivalent with hard wood edging in shelves/box for cup-board butt joints and fixing with nails and screws etc; complete and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood adging within all leads, lifts of materials and other incidentals, as per drawing & design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetres) thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Ninteen milimetres) thick commercial board for with hard wood edging S.D.B. shutter with P.G.I. sheet lining on inner side of shutters and all cut portions of shutter have 6mm (Six millimetres) thick hard wood edging cup board including fixing with nickel plated piano hinges with screws etcetera; complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetres) thick cement bounded partical board ceiling with butt jointing and nails (Frame work and cover fillets to be easured and paid for separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick 100mm (One hundred milimetres) wide pelmet with 25mm (Twenty five milimetres) wooden curtain rod and brackets including fixing with 25x3mm (Twenty five into Three milimetres) M.S. flat 10 cm (Ten centimetres) long and plug etcetra; complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. Grills of requirerd pattern in frames of windows and ventilators etcetra; with M.S. flat 20x5mm (Twenty into Five milimetres) and 8x8mm (Eight into Eight milimetres) solid, square or round bars with round headed bolts and nuts etcetra; or by screws, within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & fixing anodized matt finished aluminium Pilot/Sheet or equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. whithin all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

300x16mm (Three hundred fifty into Sixteen milimetres) size

250x16mm (Two hundred fifty into Sixteen milimetres) size

Providing and fixing matt finished anodized aluminium Tower bolts (Barrel type) Pilot/Sheel or its equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

300x10mm (Three hundred into Ten milimetres) size

250x10mm (Two hundred fifty into Ten milimetres) size

Providing and fixing aluminium handles Pilot/Sheel or its equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

Providing and fixing 150mm size (One hundred fifty millimeter) oxidized M.S. single acting spring hinges with necessary screw etc. complete including entire carriage of materials within all leads and lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing oxidized 200mm (Two hundred milimetres) size M.S. hooks and eyes complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying size of tile 600x600mm ( six hundred into six hundred milimetres) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero decimal zero eight percentage) of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty milimetres) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per Square metres) including grouting the joints with white cement andmatching pigments etc., completeas per direction of Engineer-in-charge In cement mortar as per direction of Engineer-in-charge In cement mortar within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying antiskid Ceramic floor tiles of Kajaria / Johnson / Nitco / Orient / Bell / Somany / AGL with one border matching contrast at top size 300x300 mm ( three hundred into three hundred ffity milimetre) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make and shade, laid on 20 mm ( twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metres) including curing , grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1st quality white glazed wall tiles 300x450mm ( three hundred into four hundred fifty) of Kajaria / Johnson / Nitco / Orient / Bell / Somany / AGL conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve milimetres) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 ( at the rate three decimal three) kilogram per squaremetres including pointing in white cement mixed with pigment of matching shade complete, as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 20mm(Twenty milimetres) thick Granite work (Table rubbed and polished) in flooring 20mm (Twenty milimerres). thick base in cement mortar 1:3(One cement:Three sand) including jointing with cement mortar 1:2(One white cement: Two marble dust) with an admixure of pigment to match the shade of the marble. within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimtres)diameteres on wall face P.V.C. (D-plast) or equivalent rain water pipes of working pressure not less than 4.50 kgs(Four decimal five zero kilograms) per square metre including filling the joints with aproved adhesive complete, within all leads and lifts and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) or equivalent acessories for rain water pipes including filling the joints with approved adhesive complete and within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

100mm (One hundred milimtres)diameteres PVC Plain bend (D-Plast) or equivalent

100mm (One hundred milimtres)diameteres PVC shoe (D-Plast) or equivalent

Providing and fixing M.S. holder bat clamps of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm (Twenty into Twenty five into Five milimetres) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm (Tfwenty five into Twenty five milimetres) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Two decimal Five milimetres_ thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge within all leads, lifts of materials and other incidentals

Providing and fixing steel glazed windows and ventilators of standard rolled steel sections, joints mitered and welded with 16x3.15mm (Sixteen into Three decimal Fifteen milimetres) lugs 10cm (Ten centimetres) long embedded in cement concrete block 15x10x10cm (Fifteen into Ten into Ten centimetres) size of 1:3:6 (One cement : Three sand : Six graded stone aggregate 20mm (Twenty milimetres) nominal size) or with wooden plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass panes with glazing clips and metal sash putty and applying a coat of red lead paint including carriage of materials in all leads and lifts and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing double ISI marked No. IS-1003 steel shutter windows side hung 1 (One) glazed and other wire gauge) of standard rolled steel section jointing mitered and welded manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into Three decimal Fifteen milimetres) lugs 20cm (Twenty centimetres) long embedded in cement concrete block 15x10x10cm (Fifteen into Ten into Ten centimetres) size of 1:3:6 (One cement : Three sand : Six graded stone aggregate 20mm (Twenty milimetres nominal size)or with wooden/steel plugs and screws or rawl plugs screws or with fixed clips or with bolts and nuts as required iron fitting including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G (Eighty five-G) with metal beading on other side complete including priming coat of red lead paint within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. fan clamps of type-I of 16mm(Sixteen milimetres) diameters M.S. barbent to shape with hooked ends to Reinforced Cement Concrete slab during laying including painting the exposed portion of loop all as per standard design complete within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats(excluding coat) on new wood and wood based surface with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Flush pointing on brick work with cement mortar 1:3 (One cement iasto four sand) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall Painting two or more coats with interior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces , as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and otherincidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with weather proof exterior grade emlusion paint of Asian/ Nerloac / berger design on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and otherincidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 19x19mm (Ninteen into Ninteen milimetres) and 12mm (Twelve milimeres) M.S. flat/M.S. solid square bar with a clear height of 85cm (Eighty five centimeters) at the rate 60cm (Sixty centimetres) center to center jointing with electric/gas welding at top alongwith hand rail of hollow M.S. rectangular pipe of 60x40cm (Sixty into forty centimetres), (SWG-16) vertical baluster welded/ jointed with each other with 2 (Two) Numbers. M.S. flats of 50x5mm (Fifty into five milimetres) complete with applying priming coat of red lead paint as per specification and direction of Engineer –Incharge within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty 60mm (sixty milimetres) thick inter locking paver blocks precast cement concrete of NTC inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block Grey or coloured over sub-base of concrete with 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene (P.E.) A.L P.E composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 for water supply including clamps at one metre spacing, cutting sixing and making good the walls etcetera; but excluding the cost of fittings (internal work) pipes exposed on wall 1216, including filling the joints with approved adhesive complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20 mm ( twenty milimetre) nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 16 mm ( sixteen milimetre) nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in trenches 20mm (Twenty milimetres) nominal bore/diameters galvanized mild steel tubes (medium grade) tubes fittings (earth work in trenches to be measured and paid for separately), within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and placing water tank PVC storage of ISI; 12701 marked SINTEX or equivalent G.I. inlet and outlet connection, 15mm(Fifteen milimetres) nominal bore wall valve and mosquito proof PVC cover with locking arrangements including painting of good quality complete in all respect, including overflow pipe scour pipe etrcetera and pads required for in let and out let and inside painting of good quality and hausing upto all height above ground floor level 500 (Five hundred) litres capacity tank within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing high pressure spigot and socket P.V.C. soil waste and ventilating pipe fixing with approved adhesive mixture complete 8/4.6mm (eight/Four decimal six millimetres) thick of superme or its equivalent within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing P.V.C bat clamps ISI marked of approved design with steel screws and rawl plug etc. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing P.V.C. plain bend of ISI marked including fixing with approved adhesive etc complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm nominal (One hundred ten milimetres) diameter.

Providing and fixing P.V.C single equal branch plain.ISI marked including fixing with approved adhesive etc complete, medium class, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing P.V.C. ISI marked including fixing with approved adhesive etc. Collar including filling the joints with approved adhesive complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing PVC heal rest including filling the joints with approved adhesive complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing 110mm (One hundred ten millimetres) nominal size/diameter P.V.C. floor trap ISI marked self cleaning design included fixing with adhesive complete including cutting and making good the wall and floor etc complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. Cowl complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

75mm (Seventy five millimetres) diameters.

110mm (One hundred ten milimetres) diameter.

Providing and fixing water closet (European type) viterous china Hindustan/Cera or equivalent wash down water closet squatting pan size 580mm (Five hundred eighty milimetres) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC 100mm (One hundred millimetres) size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC low level flushing cistern Item No. 502 of 10.00 (ten) Ltrs capacity ISI markedc No. 7231 with a pair of C.I. or M.S. brackets with fittings such as lead valve less siphon, 15mm (ten millimetre) nominal size brass ball valve with polythene float, C.P. brass handles, unions and couplings for connection with inlet, outlet and over flow pipe,40mm (forty millimetre) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 630x450 (six hundred thirty into four hundred fifty) vitreous china wash basin hindustan/Cera or equivalent No 1004 with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x460x200mm (Six hundred ten into Four hundred sixty into Two hundred milimetres) stainless steel kitchen sink with drain board super deluxe 6321 with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diameters rubber plug for wash basin (Heavy duty makes ISI marked is No. 8931 8934) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) C.P. brass ESS/Jal/Jaguar or equialent(Heavy duty) makes ISI marked No. 8931 & 8934 waste for wash basin or sink complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diameters M.I. union for wash basin or sink.complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) C.P. brass (Heavy duty) makes ISI marked IS No. 8931 & 8934 bottle trap for wash basin or sink complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) dia P.V.C. Supreme/Kishan or equivalent waste pipe for wash basin or sink including brass check nut etc; with in all leads and lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimeteres) C.P. grating Supreme/ Kishan or equivalent (Heavy duty) makes ISI marked IS No. 8931 & 8934 for gully floor or nahni trap within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass and screws and washers within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) towel rail complete with C.P. brass brackets Jal/Jaguar or equivalent (heavy duty) make ISI marked) fixed to wooden plugs with C.P. brass within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. Jal/Jaguar or equivalent (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated.(Heavy duty makes ISI marked) brass soap dish with C.P. brass brackets Jal/Jaguar or equivalent fixed to wooden cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated brass ISI marked) Jal/Jaguar or equivalent (Heavy duty) makes bib tap E 58 (Eighty eight) equivalent , within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diameters consealed C.P.brass stope cock Jal/Jaguar or equivalent (heavy duty makes IS marked) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass Jal/Jaguar or equivalent heavy duty makes ISI marked) brass angle valve without nuts as per approved drawing and design directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe 45cm (Forty five centimetres) length and 15mm (Fifteen milimetres) nminal bore with barss check nut and union completed etcetra; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass (Heavy duty ISI marked Jal/Jaguar or equivalent IS No 8931 & 8934) full way valve with wheel within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet apper holder (Heavy duty ISI marked Jal/Jaguar or equivalent IS No 8931 & 8934) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing two holes basin mixing faucet within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 150mm (One hundred fifty mlimetres) nominal bore / diametres PVC pipes for jointing with approved adhesive mixture within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one Cement isto five Sand isto ten graded stone aggregate 40mm nominal size ) bedding for PVC pipes of the following internal diameters, necessary form work and curing complete 150mm (One hundred fifty mlimetres) internal diametres including testing of pipes and joints within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement: Five sand) C.I. cover with frame(light duty) 455x610mm(Four hundred fifty five into Six hundred ten milimetres)internal dimensions total weight cover and frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) foundation concrete 1:5:10 (One cement: Fiver sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetres) deep within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing150x100mm (One hundred fifty into One hundred milimetres) size square mouth stone ware gully trap grade-A complete with C.I. gratings brick masonry chamber in cement mortar 1:5(One cement: Five sand) and water tight C.I. cover with frames of 300x300mm(Three hundred into Three hundred milimetres) size in side the weight of cover to be not less than 4.53 Kgs (Four decimal five three kilograms) and frame to be not less than 2.72 kgs (Two decimal seven two kilograms) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.