Balance work for Supply, Installation, Testing and Commissioning of Fire Safety System at KSRTC Bus terminal and Shopping Complex at Pathanamthitta

Amount

Fire Safety System

od44555/2023_2024 : Supply & installation of CO2 Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

od44558/2023_2024 : Supply & installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

od44560/2023_2024 : Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

od44561/2023_2024 : Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required

od44562/2023_2024 : Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. ;10 Zone Panel

od44563/2023_2024 : Supply and fixing of Optical/Smoke detector with imported base on ceiling or roof as required by the site engineer in charge.

od44564/2023_2024 : Supply, Installation of Sealed Lead Acid Battery 12 V DC x 24 Ah battery

od44565/2023_2024 : Supply and Installation of Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

od44566/2023_2024 : Supply and Fixing of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4.5 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

od44567/2023_2024 : Fire brigade Inlet connection fabricated from 100 mm dia MS Class C pipe comprising of two 63 mm dia gun metal male threaded non return valve. 4 way inlet

od44568/2023_2024 : Supply and Fixing of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS/Fibre sheet with glass fronted hinged doors and lock.

od44569/2023_2024 : Supply and Fixing of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

od44570/2023_2024 : Supply and Fixing of Hose reel drum made of Miled Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle rang of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

od44571/2023_2024 : Suppy and fixing of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

od44572/2023_2024 : Supply and Installation of Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

od44573/2023_2024 : Supply and Installation of following type strainer valve for safe pump operation. 80mm dia

od44574/2023_2024 : Supply and Installation of following type strainer valve for safe pump operation. 150mm dia

od44575/2023_2024 : Supply and Installation of alarm control valve consisting of 1 number alarm valve, 1 number main stop valve ,1 number water meter with alarm gong, pressure guage, drain valve and drain piping etc complete 150mm dia

od44576/2023_2024 : Supply and Installation of Pendent type Sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed.

od44577/2023_2024 : Supply and Fixing of Air cushion vessel made of MS sheet 200 mm dia in 1 mtr height, with automatic air release cock, 25 mm drain valve and shut off with all necessary attachments.

od44578/2023_2024 : Supply and fixing of Air release valve gun metal body of 25 mm dia

od44579/2023_2024 : Supply and fixing of pressure guage, 4 " dial, 0 - 200 psi range 3/8" BSP weather proof with stainless steel internals, siphon tube including fittings etc.

od44580/2023_2024 : Supply and fixing of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

od44581/2023_2024 : Supply and fixing of Ball Valve cast iron body as per IS 5312 with ISI mark.

od44582/2023_2024 : Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 80mm

od45806/2023_2024 : Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 150mm

od44585/2023_2024 : Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 80 mm

od44586/2023_2024 : Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm

od44587/2023_2024 : Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 150 mm

od44588/2023_2024 : Supplying, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25mm dia

od44589/2023_2024 : Supply, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32mm dia

od44590/2023_2024 : Supply, Providing, laying, testing & commissioning of f class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40mm dia

od44591/2023_2024 : Supply, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50mm dia

od44592/2023_2024 : Supply, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :. 65mm dia

od44593/2023_2024 : Supply, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :. 80mm dia

od44594/2023_2024 : Supply, Providing, laying, testing & commissioning of class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 100mm dia

od44602/2023_2024 : Supply & Erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.;

od44603/2023_2024 : Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/ Fire Exit/ Exit/ Fire Fighting Equipment/ Fire Extinguisher/ Floor/ No Smoking / danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ in case of the fire do not use life, use stairs etc having dimension 30 cm x 15 cm dimension complete

od50489/2023_2024 : Supply, erection, testing and commissioning of 5Watt PA cum Talk Back speaker wall mounted type

Miscellaneous

od44556/2023_2024 : Preparation of all drawings, submit to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval and sanction. (All statutory fees shall be borne by Client - Actual amount shall be paid after submission of bill)

od44559/2023_2024 : Fee to be remitted to Fire & rescue service Department and obtaining initial and final NOC (actual amount incurred for the above items will be reimbursed on production of original documents)

4.6.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.225 mm width X 50 mm depth X 1.6 mm thickness

od50408/2023_2024 : Supply, Installation, Testing and Commissioning charges of Y Type Strainer cast iron body with leather gasket.

od50409/2023_2024 : Supply, Installation, Testing and Commissioning of 2 way Fire brigade Inlet connection fabricated from 100 mm dia GI grade pipe comprising of two 63 mm dia gun metal male threaded non return valve.

od50856/2023_2024 : Hydraulic pressure testing of hydrant and sprinkler pipelines/ external pipes / risers etc in segments including making suitable arrangements for the same of all diameters size and rectification of the same for retention of pressure by welding/providing External Pipe Clamps/providing MCU (Moisture Cured Urethane) Wraps as required by Site Engineer in charge

UPS and accessories

od44557/2023_2024 : Supply, Installation, Testing and Commissioning of Single phase, 5 kVA Online UPS along with Maintenance free SMF batteries and battery rack complete with 2 hr backup. UPS must have inbuilt Short Circuit, Over-Current Over-Voltage protection. Minimum 2 year warranty. Make: APC/V-Guard/Luminous or equivalent

Pumps

od46251/2023_2024 : Supply, installation, testing and commissioning of Electrically driven Terrace pump raced 450 LPM at 24 M head high efficiency volute type with cast iron casting, impeller, pump coupled to a squirrel cage induction motor, totally enclosed fan cooled with supply condition 415V, 3 phases, 50Hz, foot mounted type rated for 5 hp at 2900 rpm including all mounting and necessary accessories complete as required by Fire Department. Make: Kirloskar/Grundfos/Mather and Platt/WEG or equivalent

od48360/2023_2024 : Supply Installation, testing and commissioning of Main Diesel Engine driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 70 M head at suitable HP, high efficiency volute type with cast iron casing, Cast lron impeller Pump coupled to a diesel engine including supply of all accessories such as common base plate suitable foundation for engine and pump, instrument panel with RPM indicator, Ammeter, Lube Oil pressure gauge / switch and standard fuel tank tool kit, 12/24V 150AH Battery, Water coolant, lubricating oil, exhaust piping up to 3 Mtrs, and interconnecting cable from control panel to Enqine etc. complete. Kirloskar/Grundfos/Lubi/Crompton or approved equivalent

od48361/2023_2024 : Supply Installation, Testing and Commissioning of Main fire fighting pump of centrifugal end suction type rated for 2280 LPM at 70 m head high efficiency volute type with cast iron casing Cl impeller, pump coupled to a squirrel cage induction motor, TEFC with supply condition 415v,3 phase, 50 HZ, foot mounted type rated for 50 HP at 2900 RPM including supply and installation of all accessories like base frame foundation bolts etc. complete.;Kirloskar/Grundfos/Lubi/Crompton or approved equivalent

od48402/2023_2024 : Supply, Installation, Testing and Commissioning of 80 mm dia MS 'B' class Exhaust pipe for diesel Engine pump

od50531/2023_2024 : Supply and fixing priming arrangement tank consisting of priming tank of capacity 900 liters fabricated our of 3 mm thick MS sheet, graduated water level indicator, high and low level switches, on a masonry pedestal with water in and out connections, drain and overflow connections, supplying and laying suitable size MS pipes for priming lines to main pump, DG pump and jockey pump from the priming tank as per requirements including supplying and fixing of suitable size sluice valves, non-return valves, float valve assembly etc as per functional requirements as required.

od50548/2023_2024 : Supply, Installation, Testing and Commissioning of Jockey pump – 180 LPM at 60m, end suction back pull out pump fitted with CI Casing, Bronze impeller, carbon steel shaft, gland packed, discharging 180 LPM at 60mts, directly coupled to 5.5kW, 7.5 HP, 3000 RPM (Syn) TEFC IE2, IP55, Class F insulation, Squirrel cage induction motor confirming to IS12615:2018, with MS fabricated base frame, flexible jaw type coupling and coupling guard, supplied as a set. Make : WEG/ Grundfos/GE or equivalent

Panel

Electrical Works

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.37 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od49847/2023_2024 : Supply,Installation of flame proof exhaust fan of 230V, 305mm sweep IP66 protection including all required mounting accessories,frames complete.(Make - Crompton,Wipro, or equivalent)

od49848/2023_2024 : Supply,Installation of flame proof LED batten suitable for twin T8 tube of 16W/20W IP65 protection including all required mounting accessories,frames complete.(Make -Crompton,Wipro,Philips or equivalent)

90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Submersible Pump

90.12.1.42 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

od51140/2023_2024 : Supply, Installation, Testing and Commissioning of Openwell Submersible Three Phase Pump including control box, switchgear, starters and mounting accesories complete. Make: Crompton/WEG/Kirloskar/V-Guard

Civil Works for Pump Room

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

16.84 : Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

od55703/2023_2024 : Providing and laying damp-proof course of 150 mm thick with Reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size )including the cost of centering, shuttering, finishing , reinforcement and mixing water proofing material in cement concrete work etc complete.

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.2.2 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.12.1 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar

21.15.1 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Anodized (AC 15 ) aluminium

9.102 : Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

21.19.1 : Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width

9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

9.97.1 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm

od50635/2023_2024 : Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete 110mm dia core drilling;;

15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Bidder Name

USHA FIRE TECH