BUILDING WORK

No. figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 215.34 Cum 117.07

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead. (A) Loose or soft soil.

2 Excavation for foundation from 1.5 mt. to 3.0 depth including sorting out 37.65 Cum 129.80

and stacking of useful materials and disposing off the excavated stuff

upto 50 Meter lead. (A) Loose or soft soil.

3 Filling available excavated earth (excluding rock) in trenches. plinth, 189.30 Cum 130.39

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming and watering.

20cm. thickness including watering, ramming and consolidating etc.

completed.

5 Filling in plinth with sand under floors including watering, ramming, 27.00 Cum 460.18

consolidating and dressing etc. complete.

6 Providing and laying cement concrete 1:2:4 (1- Cement : 2 Coarse sand 39.39 Cum 3657.21

: 4 graded stone aggregates 20 mm nominal size) and curing complete

including cost of formwork in foundation and plinth. (A) PCC

7 Providing and laying cement concrete M-200 and curing of concrete 24.84 Cum 4272.30

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (A) Footing.

8 Providing and laying cement concrete M-200 and curing of concrete 4.71 Cum 7579.04

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in all types of Column (D)

Column, pillars, posts and struts, upto plinth.

9 Providing and laying cement concrete M-200 and curing of concrete 8.49 Cum 7579.04

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in all types of Column (D)

Column, pillars, posts and struts, for Ground Floor

10 Providing and laying cement concrete M-200 and curing of concrete 1.62 Cum 7660.95

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in all types of Column (D)

Column, pillars, posts and struts, for Terrace Floor.

11 Providing and laying cement concrete M-200 and curing of concrete 12.75 Cum 5957.99

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams upto plinth.

12 Providing and laying cement concrete M-200 and curing of concrete 18.33 Cum 5957.99

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in all types of beams for

Ground Floor

13 Providing and laying cement concrete M-200 and curing of concrete 19.56 Cum 5903.45

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in all types of slabs, all

thickness (C) Slab upto plinth and for Ground Floor

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

14 Providing and laying cement concrete M-200 and curing of concrete 2.40 Cum 5520.66

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Lintel upto Ground floor.

15 Providing and laying cement concrete M-200 and curing of concrete 2.70 Cum 6496.32

complete, including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Chhajja upto Ground

16 Providing I.S.I. mark T.M.T. Bar Fe-500D reinforcement for R.C.C. work 9948.87 Kg. 76.24

including bending, binding and placing in position complete upto floor

two Ground Floor, First Floor, Second Floor, Terrace Floor, Lift Machine

floor (all floor).

17 Providing and laying brick work using common burnt clay building 31.17 Cum 4021.02

conventional type bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement :

6 fine sand) for Ground floor upto plinth including the cost of all

materials and labour charges etc. complete.

18 Providing and laying brick work using common burnt clay building 69.63 Cum 4309.74

conventional type bricks having crushing strength not less than

kg./Sq.cm. in super structure in Cement Mortar 1:6 (1 Cement : 6 fine

sand) for Ground floor including the cost of all materials and labour

charges etc. complete.

19 Providing and laying brick work using common burnt clay building 20.73 Cum 4351.85

conventional type bricks having crushing strength not less than

kg./Sq.cm. in super structure in Cement Mortar 1:6 (1 Cement : 6 fine

sand) for First floor including the cost of all materials and labour

charges etc. complete.

20 Providing and laying half brick masonary in common burnt clay building 16.02 Sq.m. 599.83

conventional type bricks having crushing strength not less than

kg./Sq.cm. in foundation and plinth in Cement Mortar 1:4 (1 Cement :

coarse sand) including the cost of all materials and labour charges etc.

21 Providing 15mm thick cement plaster in single coat on rough (similar) 455.73 Sq.m. 167.03

side of single or full / half brick walls for interior plastering upto floor two

level and finished even and smooth in cement mortar 1:4 (1 cement :

sand) for Ground Floor.

22 Providing 15mm thick cement plaster in single coat on rough (similar) 90.18 Sq.m. 191.59

side of single or full / half brick walls for interior plastering upto floor two

level and finished even and smooth in cement mortar 1:4 (1 cement :

sand) for First Floor.

23 Providing 10 mm thick cement plaster in single coat on fair side of 163.35 Sq.m. 152.04

ceilings for interior plastering upto floor two level and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) for Ground Floor.

24 Providing 20mm thick sand faced cement plaster on walls upto any 452.13 Sq.m. 329.29

height metres consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete upto Ground floor to Terrace (LMR) floor.

25 Providing and laying Granite Slab 18mm thick in flooring laid 20mm 21.60 Sq.m. 2189.68

thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with

grey cement slurry including full moulded round front edges, rubbing

and polishing etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

26 Providing and laying Granite Slab 18mm thick in risers of steps dedo, 58.74 Sq.m. 2159.38

window sill, jambs and pillars laid 10 mm thick cement mortar 1:4 (1

cement : 4 coarse sand) and jointed with grey cement slurry including

full moulded round edges, rubbing and polishing etc. complete.

27 Providing and laying Vitrified 8 mm to 10mm thick, 24" x 24" in flooring 141.15 Sq.m. 1073.12

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white

28 Providing and laying Vitrified 8 mm to 10mm thick, 24" x 24" in skirting, 73.44 Sq.m. 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

3 coarse sand) and jointed with white cement slurry. Soluble Salt

Vitrified tiles flooring.

29 Providing and fixing flush door both sides laminated and shutter 23.94 Sq.m. 2781.54

fabricated from 35 mm thick solid core melamine faced three layered

pre laminated flat pressed wood based exterior grade bonded

BWP/BWR synthetic resin having stamped IS 12823 grade I type II

including three coats of lacquer polishing to exposed wooden surfaces

and stainless steel decorative type designs fixtures / fastening 2 Nos.

handles, 2 Nos. Aldrops, tower bolt etc. as per architectural detailed

drawing and as directed by engineer in charge.

30 Providing and fixing window having extruded aluminum colour anodized 12.96 Sq.m. 1583.95

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt, horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mm x 18mm x 1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456 Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with one shutter mosquito

net powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete as per drawing

and instruction of Engineer-in-charge.

31 Providing and fixing standard extruded of alluminium section of size 8.64 Sq.m. 1175.55

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/Rmt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc. complete for Ventilation

32 Providing and fixing M.S. grills of required pattern of windows etc. with 855.90 Kg. 109.08

M.S. flats at required spacing and frame alround square or round

headed bolts and nuts or by screws including applying a priming coat of

red lead paint and two coats of oil painting etc. complete (A) Plain grill.

33 Applying two coats of putty & two coats of primer of approved brand and 635.82 Sq.m. 40.59

manufacture on new wall surface, ceiling surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of approved brand 635.82 Sq.m. 78.90

and manufacture on undecorated wall surface, ceiling surface to give an

even shade including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

35 Finishing wall with weather proof exterior emulsion paint on wall surface 452.13 Sq.m. 114.53

(two coats) to give and required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials etc. complete

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

36 Wall painting cartoon types, ABCD, 123, Animal photos, Vegetables & 72.00 Sq.m. 1045.35

fruit painting with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

37 Providing and laying integral cement based water proofing treatment 163.35 Sq.m. 892.84

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations. (a) Applying

and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before

treatment. (b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement :

Coarse sand) admixed with proprietary water proofing compound

conforming to IS:2645, brick bats is finally covered by jointless cement

plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with

false chequered marking of 300 mm.size. The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl. curing

etc. complete with average thickness of 120 mm and minimum

thickness at khurra as 65 mm

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge with average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 bags/S.M.)

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. Unit Rate of 1 Sq.mt.

38 Providing and fixing Stainless Steel railing having 50 mm dia. hollow 15.00 Rmt. 3333.50

stainless steel pipe as hand rail and 32 mm dia hollow stainless steel

pipe with combination of 10 cm long 16mm dia. pipe as per vertical

supports 20 mm dia hollow stainless steel pipes as intermediate running

through stainless steel 30 mm dia. solid runners having threaded screw

to fix the runner with vertical support including cutting, bending, welding

& fabrication the structure as per drawing including finishing etc.

39 Providing and constructing sandwitch type Granite stone top & bottom 7.50 Rmt. 3763.26

kota stone platform 0.6 mt. wide & 0.75 mt. height, including front

granite stone patti of 10 cm wide, vertical partitions of Kota stone with

cement mortar (1:1) as required complete as per instruction given by

site in charge at all floors.

40 Providing and fixing Child Friendly wash down water closet (European 3.00 No. 1595.04

type, W.C. Pan) with integral P or S trap including jointing the trap with

soil pipe in cement mortar 1:1 (1 cement : 1 fine sand) including

providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (A) vitreous china pattern (i)

in white colour.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

41 Providing and fixing Child Friendly wash basin with single hole for pillar 3.00 No. 1964.83

tap with C.I. or M.S. brackets painted white including cutting holes and

making good the providing and fixing C.P. brass waste for washbasin or

sink. (A) 32mm dia. including providing and fixing pillar tap, capstan

head, screw down high pressure with screws, shanks and back nuts. (i)

15mm dia. including providing and fixing brass screw down stop tap.(A)

15mm dia..(A) Vitreous china (ii) Flat back washbasin 550 mm x

400mm size. (i) In white colour.

42 Providing and fixing 600mm x 450mm bevelled edge mirror of superior 3.00 No. 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden plug with C.P. brass screws and washers.

43 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted 3.00 No. 3158.53

white including cutting holes in walls and making good the same (C)

S.S. & sink. (i) 600mm x 450mm x 150mm size with providing and fixing

C.P. brass waste for washbasin or sink. (A) 32mm dia.

44 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 9.00 No. 558.36

diameter with jali of the following nominal diameter of self cleansing

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

45 Providing and fixing screw down bib taps of following size. (A) Brass 12.00 No. 186.83

screw down bib tap polished bright. (i) 15mm dia. as directed by

Engineer in charge.

46 Providing and fixing Gun metal check or non-return fullway wheel valve. 6.00 No. 420.63

25mm. dia.

47 Providing and fixing chromium plated brass half turn flush cock of 3.00 No. 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

as directed by Engineer-in-charge.

48 Providing and fixing ball cock of approved quality as directed.(A) Copper 3.00 No. 132.89

Metal (A) 25mm. dia.

49 Providing laying and jointing in true line and level I.S.I. mark 15mm dia. 42.00 Rmt. 72.65

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

50 Providing laying and jointing in true line and level I.S.I. mark 25mm dia. 42.00 Rmt. 91.84

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

51 Providing, laying and jointing in true line and level I.S.I. mark 110mm 72.00 Rmt. 835.15

diametre U.P.V.C. (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

52 Providing and fixing S.W. gully trap with C.I. grating brick masonry 6.00 No. 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight. (i) Square mouth traps. (B) 150mm x

100mm size P or R type.

53 Constructing brick masonry road gully chamber 500mm x 450mm x 6.00 No. 2017.19

600mm including 500mm x 450mm C.I. horizontal grating wih frame

54 Constructing brick masonry chamber for underground C.I. Inspection 6.00 No. 2932.93

chamber and bends with bricks having crushing strength not less than

35 Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C.

top slab with 1:2:4 mix (1-cement : 2 coarse sand : 4 graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

55 Providing, laying (to level or slopes) and jointing reinforced concrete 30.00 Rmt. 248.67

light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete. (B) 150 mm dia.

56 Providing & fixing G.I. Rain water spout of 50 mm dia & 30 cm length 3.00 No. 101.91

etc. complete.

57 Providing and fixing in position cowel went to pipes. (C) 100mm dia. as 6.00 No. 501.87

58 Providing erecting and fixing double coated ISI PVC water tank of 3000.00 Liter 3.94

required capacity each with all necessary fittings and connection etc.

complete on terrace.

59 Providing and fixing SS 304 Foldable Checking bed having size 1.50 x 3.00 No. 5050.00

0.60 x 0.75 mm including using of 25mm dia pipe, SS 2mm thick,

matter of 25.4 (1") of 40 density, cover with regine cloth of approved

quality etc. completed as directed by Engineer incharge.

60 Providing and placing I.T. wood writing table having size 1.50 x 0.75 x 3.00 No. 14443.00

0.75 mt with one side drawer with using of 19mm thick WP wood, top

cover with 1 mm thick wood type formica including using of all

necessary material & labour etc. completed as directed by Engineer in

61 Providing and fixing Fabric cloth Curtain having length 1.8 mtr for 27.00 Mtr. 767.60

covering of checking area including using of alluminum sliding channel

etc. complete as directed by Engineer incharge.

62 Providing and fixing of SS 304 Hanger for bag including using all 60.00 No. 171.70

necessary materials like SS rail, screw etc. completed as directed by

Engineer incharge.

63 Providing and fixing pin cushion display board having size 1.20 x 0.75 3.00 No. 606.00

mt including using of alluminum section frame, 18mm thick WB

plywood, navy blue cushion cloth pin etc. completed as directed by

Engineer incharge.

64 Providing and fixing PVC modular kitchen cabinet consisting of base 7.50 Sq.m. 7575.00

and wall units, made from high quality rigid PVC boards (minimum

15–18 mm thick) including shutters, shelves, drawers, SS hinges,

telescopic channels, handles, magnetic locks, necessary fittings,

cutting, fixing, complete as per design and direction of Engineer-in-

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

65 Providing and fixing of hook of 10mm or 12mm dia. including drilling 3.00 No. 303.00

hole, fixing of male- female thread fastener sealing the same with epoxy

compound, finishing the same etc. complete as directed by Engineer

66 Providing and fixing medical device & equipment standio meter height 3.00 No. 1414.00

measuring scale 2.10mt long including fixing in wall with using of all

heavy SS screw, rail etc. complete as directed by Engineer incharge.

67 Providing and supplying standard PVC (Polyvinyl chloride) Chair with 6.00 No. 1010.00

handle of approved design and make as directed by Engineer incharge.

68 Providing and supplying standard PVC (Polyvinyl chloride) Stool having 6.00 No. 606.00

size 3.75 x 0.60 x 0.45mtr of approved make as directed by Engineer

69 Providing & fixing ABC type fire extinguisher 4 kg. ISI marked complete. 3.00 No. 1515.00

70 Providing and fixing 50 inch LED television with Google Operating 3.00 No. 28269.90

system, 20W to 24W Audio output, 60 Hz refresh rate etc. completed as

directed by Engineer incharge.

71 Providing and fixing RO WATER machine, with storage capacity of 20 3.00 No. 15150.00

litres with standard manufacturer etc. completed as directed by

Engineer incharge.

Electrical Items

72 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 Sq.mm & 24.00 Point. 539.34

earth wire of 1.5 Sq.mm (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multistrand copper wires, in following type of pipe

to be erected concealed in / flushed on wall / ceiling, complete with 6A

Tissino Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary Lamp holder / ceiling

rose / H.D. Connector as directed. (a) with medium class Rigld PVC

pipe and accessories erected flushed on wall/ceiling complete.

73 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 9.00 Point. 765.58

(Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic / Wooden

box, single mounting base frame covered with textured /metallic/white

front plate modules erected on/in wail/ceiling as per pipe erected with

necessary ceiling rose /H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling

74 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 9.00 Point. 570.65

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic /

Wooden box covered with appropriate front plate modules erected on/in

wall/ceiling as per pipe erected with following type of accessories. (a)

with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

75 Point wiring for on board Looped Plug with 6А Modular type switch & 5 6.00 Point. 309.06

pin socket erected on PVC / Metallic / Wooden box, single mounting

base frame covered with textured / metalic / white front plate modules

erected on /in wall / celling with following type accessories.

76 Providing and erecting Mains with 1:1 KV grade FRLS PVC insulated ISI 150.00 Mitr. 104.03

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in flushed on wall/ceiling, with 1.5 sq.mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid PVC pipe and

accessories (b) 2 Wire 2.5 Sq. mm

77 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 120.00 No's 184.83

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq.mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

following size. (A) with medium class Rigid PVC pipe and accessories.

(b) 2 wire 6 sq.mm

78 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 3.00 No's 368.65

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

79 For using salt and charcoal / coke as required for pipe type earthing. 3.00 No's 171.70

80 Providing & erecting 240 V MCB double pole switch for motor & 3.00 No's 362.59

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (B) 40 Amp. Cat.III

81 Providing and erecting Sheet Steel powder coated MCB distribution 3.00 No's 702.96

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs. (The DBs should be used of same

company of MCB to be used) (A, a, ii) Single phase 8 way single door

82 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 15.00 No's 535.30

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt, LED LED driver efficiency >

85% (fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings. The

shown) (A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV,

IP-20, conventional 4 feet Cat-lll

83 Supplying and erecting led lamps with following wattage capacity of 220 9.00 No's 188.87

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (iii) 10 to 15 watts.

84 Providing and erecting Approved make Ceiling fan with double ball 9.00 No's 1738.21

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

85 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 3.00 No's 2166.45

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed (i)

Amps. DP Cat. III

86 Providing and erecting Miniature circuit breaker single pole 6A to 25A 18.00 No's 123.22

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box confirming to IS 8828/1996 with ISI

87 Supplying & erecting floor mounted/ table top single phase 50Hz water 3.00 No's 11557.43

dispenser with SS 304 food grade cold tank specification having three

water tap of hot / cold / ambient water function, LED display with

storage capacity from 2.5 Ltrs to 3.2 Ltrs, cooling capacity 2.5 ltrs/hr,

including refrigerant with 20ltrs refrigerant storage capacity

compartment inclusive 1 No. water topping bottle

Total Rs.

i.e. Rs. Thirty Nine lacs Fourty Six thousand One hundred Fourty Seven and Two paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ___________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Valiya Bharuch Bharuch