Providing installation, testing and commissioning of pumping Machinery with allied electro mechanical works at WSS Chowki Handan Filtration Plant Nowshera

Amount

Supply, loading, transportation (MT), insurance, Unloading, carriage/ shifting (head load) of Mono submersible pump set 20000 GPH x 40MH (Head Range +/-5%), coupled with suitable motor. The recommended make of Pump should be Kirloskar/ KSB/ LUBI/Mathur and Platt along with motor at pumping station Intake of filtration plant Chowki Handan. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Supply, loading, transportation (MT), insurance, Unloading, carriage/ shifting (head load) of HC pump set 6000 GPH x 150MH (Head Range +/-10%), coupled with suitable motor. The recommended make of Pump should be Kirloskar/ KSB/ FNC/Mathur and Platt along with motor at pumping station filtration plant Chowki Handan. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Supply, loading, transportation (MT), insurance, Unloading, carriage/ shifting (head load) of HC pump set 7000 GPH x 250MH (Head Range +/-10%), coupled with suitable motor. The recommended make of Pump should be Kirloskar/ KSB/ FNC/Mathur and Platt along with motor at pumping station filtration plant Chowki Handan. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Installation of monosub Pump Set 20000GPH x 40MH along with allied equipment by way of fabrication of GI pipe column of 100mm dia, 10ft long welded with MS flanges-100mm dia at both ends-02nos. Fabrication of GI pipe nipples with threads at one end & MS flange at other end & fastening the threaded end of nipple with the delivery of pump. Fabrication of MS clamps 100mm dia. - 02 Nos. for holding submersible pump & nipples. Fabrication/ fitting of bed plate for resting of clamps for holding monosub pump & nipples. Fabrication of stand of angle iron for resting of monosub. Coupling of pump motor with the help of coupling pulley. Providing/fitting of 4mm square submersible cable -25 mtr for making of connection with motor with proper insulation. Making of gantry post of G.I. pipe 100mm dia by way of fabrication of vertical column pipe 15 ft long-02 no and 4ft long -01no, erection of gantry post and grouting properly so as to restrict its movement. Providing /fitting of 1ton capacity chain pulley block heavy duty-01no. Lowering of pump motor set along with GI pipe nipples with the help of chain pulley block, ropes & skilled/unskilled labours. Providing/Fitting of MS bends 100mm dia.-01no with MS flanges. Providing/Fitting of 100mm dia check valve -01no with MS flanges, nut/bolts & washers, and interconnecting with the raising main with all allied welding work.

Laying of foundation block HCP6000GPH X 150MH with motor of size 2mtr x 1 mtr x 1mtr depth inside the pump room by way of excavation of floor and disposal of the excavated earth by using manual labour outside the premises. Cleaning and levelling of excavated trench. The job includes fabrication, welding and laying of steel mesh made from 10 mm tor steel placed horizontally, vertically and diagonally at equal distance including form work. Laying of foundation block of RCC in the ratio 1:2:4 (cement, sand and Bajri) and grouting of fabricated foundation bolts. The entire block to be laid in such a way that it can dump all types of mechanical vibration created by dynamic load of the pump. Placing of base frame and levelling. Tightening of base frame by fastening of -04No. foundation bolts. Complete job includes cost of all types of material such as cement, sand, Bajri, tor steel, foundation bolts, nuts, washers, bolts, carriage of material to site of work on H/L, hire charges of tools and tackles, labour charges of skilled and semi-skilled workers.

Laying of foundation block HCP 7000GPH X 250MH with motor of size 2mtr x 1 mtr x 1mtr depth inside the pump room by way of excavation of floor and disposal of the excavated earth by using manual labour outside the premises. Cleaning and levelling of excavated trench. The job includes fabrication, welding and laying of steel mesh made from 10 mm tor steel placed horizontally, vertically and diagonally at equal distance including form work. Laying of foundation block of RCC in the ratio 1:2:4 (cement, sand and Bajri) and grouting of fabricated foundation bolts. The entire block to be laid in such a way that it can dump all types of mechanical vibration created by dynamic load of the pump. Placing of base frame and levelling. Tightening of base frame by fastening of -04No foundation bolts. Complete job includes cost of all types of material such as cement, sand, Bajri, tor steel, foundation bolts, nuts, washers, bolts, carriage of material to site of work on H/L, hire charges of tools and tackles, labour charges of skilled and semi-skilled workers.

Installation of HC pump motor set 6000 GPH X 150 MH with motor along with allied works by way of placing the HC pump set and motor on the base plate tightening of foundation bolts of pump and motor set fixing of coupling pulley on drive end side of pump and motor shaft with the help of cotters and coupling bolts. Proper leveling of pump motor set on the base frame by way of providing steel shims and checking the alignment of pump motor set. Fabrication, fitting and laying of 80 mm dia suction line from service reservoir upto the suction of HC pump set by way of providing and fitting of 80 mm dia heavy duty sluice valve-01no with flanges which is required for stopping the flow of water in suction line for maintenance of pump set. Providing and fixing flange of matching hole of suction size, reducer nipple with proper bend to be fitted on the suction side of the HC pump set. Fabrication, fitting and laying of 80 mm dia delivery by way of providing/welding of matching holes MS flange of delivery size, fitting of expander on the delivery side of pump set. Providing and welding 80mm dia half bends -01no. Providing and fixing of 80 mm dia heavy duty sluice valve 1 No. and reflux valve 1 No. with nuts, bolts and gaskets with proper flanges on both sides. Laying and fixing of common delivery outside the pump room for interconnection of pumping set as standby arrangement. The delivery lines of both the pump sets shall be connected/ joined/ welded with the common delivery. Making interconnections of common delivery with 80 mm dia existing rising main by fabrication and fitting of nipples, bends, flanges as per site requirement. Complete job including cost of material, welding charges, hire charges of tools and plants

Installation of HC pump motor set 7000 GPH X 250 MH with motor along with allied works by way of placing the HC pump set and motor on the base plate tightening of foundation bolts of pump and motor set fixing of coupling pulley on drive end side of pump and motor shaft with the help of cotters and coupling bolts. Proper leveling of pump motor set on the base frame by way of providing steel shims and checking the alignment of pump motor set. Fabrication, fitting and laying of 100 mm dia suction line from service reservoir upto the suction of HC pump set by way of providing and fitting of 100 mm dia heavy duty sluice valve-01no with flanges which is required for stopping the flow of water in suction line for maintenance of pump set. Providing and fixing flange of matching hole of suction size, reducer nipple with proper bend to be fitted on the suction side of the HC pump set. Fabrication, fitting and laying of 100 mm dia delivery by way of providing/welding of matching holes MS flange of delivery size, fitting of expander on the delivery side of pump set. Providing and welding 80mm dia half bends -01no. Providing and fixing of 100 mm dia heavy duty sluice valve 1 No. and reflux valve 1 No. with nuts, bolts and gaskets with proper flanges on both sides. Laying and fixing of common delivery outside the pump room for interconnection of pumping set as standby arrangement. The delivery lines of both the pump sets shall be connected/ joined/ welded with the common delivery. Making interconnections of common delivery with 100 mm dia existing rising main by fabrication and fitting of nipples, bends, flanges as per site requirement. Complete job including cost of material, welding charges, hire charges of tools

Supply, loading, transportation (MT), insurance, Unloading, carriage/ shifting (head load) of 250 KVA Voltage Stabilizer at pumping station Garran. Oil cooled unbalances Type 415Volt, with Transformer Oil in Copper windings. Voltmeter/Ampere meter Good quality ISI make of Required Specification. Capacity : 250KVA Phase : 03 Make Confirming to relevant ISO With all latest amendments Input voltage : (160-380 ) volt Output voltage : 415 volts +/- 10% Type : Manually operated Correction Rate : 12 to 35 V/sec Regulation : +/- 10% Frequency : 48 to 52 Hz Cooling Method : Oil Cooled Efficiency : 95% By pass change over Switch : Yes MCCB : Heavy Duty Paint : Painting shall be enamelled steel grey / Green Colour. Material of Construction : The Core should be first quality (CRGO) Silico Steel core. Voltage stabilizer shall be mounted on 02 pairs of H/D MS wheels for making shifting/ fixing easy. Installation, by way of providing /fitting of 35mm sq copper(multi strain) cable for making connections from main switch to Voltage stabilizer for all the three phases in three leads with neutral & then from stabilizer to buss bar fuse system with proper thimbling duly crimpled by using crimpling tool & proper insulation. Filling of transformer oil up to required level after heat treatment/dehydration to make it moisture free. Job includes cost of material and Fitting charges.

Fabrication and fitting /grouting of angle iron panel board fitted with 12mm thick water proof ply with good quality mica. Providing/fitting of 200 Amp 415V HRC type main switch (H/DUTY) -01 no, Providing/fitting of 240mm-3.5 core square aluminium cable -30mtr armoured for making of connection from LT fuse system of transformer to main switch with proper thimbling and insulation Providing /fitting of submersible automatic control panel fitted with single phase, over load protection relay -02 No. of suitable capacity of motor of monosub. Extension of LT Net work from pump room to the site of installation of monosub in percolation well by way of providing /Erection of steel tubular pole -06no (6mtr) long with complete fitting of shackles, insulators, nut bolts ete. Providing/stringing of ABC cable25mm sq -200mtr Aprox which is required for extension of three phase power supply upto site of installation. Providing/fitting of copper cable for making of electrical connections from busbar to starter and then to 40HP motor with proper thimbling and insulation. Providing/fitting of 40HP-02No star delta oil immersed double contact starter filled with transformer oil. Checking continuity of whole electric circuit. Checking of all electrical connections, tapping and tightening all other connections.

Testing and commissioning of pumping machinery and all other allied electromechanical works. Checking of all electrical connections, tapping and tightening all other connections. Plugging of leaking joints if any by way of welding, replacement of gaskets and tightening of nuts and bolts. Checking the alignment of pump and motor sets and testing the machinery on full load. Complete job.

M/S FASTTRACK ENGINEERS

BEE AAR ENTERPRISES