Repair/replacement of Internal Electrification at Birpur and Ghunghora under AGE E/M -II under GE Dheradun.

Amount

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

(a) One light point point /bell buzzer point controlled by one-one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No 2 here-in-before but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

All as per item No 2 here-in-before but up to Sheet matel enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in existing PVC / Steel, concealed and existing MS boxes, mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following Note: The wiring to be done as per IE rule and maintain colour code accordingly

One light point point /bell buzzer point controlled by one-one way switch.

One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

One light point controlled by two way switch

All as per item No 5 here-in-before but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

All as per item No 5 here-in-before but up to Sheet matel enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 2 single core FRLS/FR PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including PVC casing & caping/conduit with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complete with 1.5 sqmm PVC insulated unsheathed multistranded copper conductor 1100 volts grade green colour for earth continuity all a specified and directed

All as per item Ser No 8 here-in-before but for one 5 Amp socket outlet independent all as specified & as directed by Engr -in-Charge.

All as per item Ser No 8 here-in-before but for one 5 Amp socket outlet on the same board with other switches complete all as specified and directed.

All as per item Ser No 8 here-in-before but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity all as specified and directed

Supply and fix switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

Supply and fix switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

Supply and fix socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

Supply and fix socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

Supply and fix Bell switch paino flush button type 5 Amp complete all as specified.

Supply and fix ding dong bell AC 230 V single pole complete all as specified and directed .

Supply and fix switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

Supply and fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts complete all as specified and directed.

Supply and fix ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC complete all as specified and directed.

Supply and fix lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings complete all as specified & directed.

Material and labour sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

All as per item No 19 here-in-before but size of 6 Sq.mm. and 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed

Material and labour sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in existing PVC / Steel concealed conduit. and one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

All as per item No 21 here-in-before but size of 6 Sq.mm. and 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed

Material and labour for sub main wiring with two single core PVC insulated and unsheathed cable with copper conductor 6 sqmm multi stranded (nominal area ) and drawing into suitable size of PVC conduit heavy duty including 6 sqmm PVC insulated copper cable green with earth wire and connected to earth terminal etc complete all as specified and directed by Engineer-in-Charge (Conduit and conduit accessories measured separately)

All as per item No 23 here-in-before but 10 sqmm, and 10 Sqmm as earth wire upto common earth and connected to earth dolly complete all as specified & directed .

Supply and Fixing rigid non-metallic PVC conduit 25 mm dia (External) exclusive of boxes (Junction /terminal) but inclusive of all tees, bends, elbows, reducers, ball mouths tubes ends and fixing for accessories such as couplers lock nuts, saddles pipe, hooks etc complete all as specified.

All as per item No 25 here-in-before but 20 mm dia complete all as specified and directed.

All as per item No 25 here-in-before but 32 mm dia complete all as specified and directed.

Supply and Fixing PVC junction box ( L to 4 way) 25 mm dia external complete all as specified and directed.

All as per item No 28 here-in-before but 32 mm dia complete all as specified and directed.

All as per item No 28 here-in-before but 20 mm dia complete all as specified and directed.

Supply and Fixing for sun mica sheet 3 mm thick fixing size 250x200 mm directed by Engineer-in-Charge (Make Hylum/Cona/ISI marked) complete all as specified and directed.

All as per item No 31 here-in-before but 100x100mm complete all as specified and directed.

All as per item No 31 here-in-before but 300x250 mm complete all as specified and directed.

All as per item No 31 here-in-before but 150 x 100 mm complete all as specified and directed.

Supply and Fixing 3 core 1.5 Sqmm copper conductor cable in existing pole incl making holes for cable entry and exist near to light fitting and junction box complete all as directed.

Supply and fix sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

All as per item No 36 here-in-before but 12 way complete all as specified and directed..

All as per item No 36 here-in-before but 6 way complete all as specified and directed.

All as per item No 36 here-in-before but 4 way complete all as specified and directed.

Supply and fix sheet metal enclosures 240 volt, Single Door 2 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and out going complete all as specified and directed.

Supply and fix MCB double pole 240 Volt 10 KA 63 Amp 'B' series marked complete all as specified & directed.

Supply and fix MCB double pole 240 Volt 10 KA 40 Amp 'B' series marked complete all as specified & directed.

Supply and fix MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series marked all as specified and directed.

Supply and fix sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed.

Supply and fix MCCB 415 Volt 16 KA 4 pole 125 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply and fix MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply and fix in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, Fixing and testing LED down lighter recessed mounted 2x2 feet 36W ultra modern designed LED luminaire which provide soft light and glair free symmetrical illumination suitable for grid ceiling and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed all as specified and directed.

Supply and fix high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and fix high efficiency LED bulbs 1 X 9 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Material and labour for service cable 10x2 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed complete all as specified and directed.

All as per Item No 54 here-in-before but 19 but 6x2 sqmm complete all as specified and directed.

Supply and fix in replacement air ventilation fan matalic body 300mm, 900 RPM, single phase, 230V AC including necessary, Material and labour for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Note: old unserviveable fan shall be deposite in E/M yard.

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.

Supply and fixing of LED tube rod 18/20 Watts single or double sided connections polycarbonate complete incl making connection alteration in existing tube light fitting complete all as specified and directed.

Supply and fix in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed ( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. )

Supply and fix in replacement of 3 core PVC insulated copper cable of size 40/0.0076 multi standard in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fix copper flexible wire hoisted twin cord 23/0076 for connection of ceiling fan etc. complete all as specified and directed.

Disconnecting electric connection and taking downhof ceiling fan / Exhaust fan removing capacitor,split pins of any sweep ceiling fan / Exhaust fans complete carefully for overhauling checking of bearings/bush, cleaning the fan blades with cleaning solution, replacing the unserviceable bearing, bush, capacitor , safety split pin and nuts, bolts, washer etc duly threaded of down rods (bush, bearing, capacitor, down rod, hanging clamps, will be paid under relevant item of the Sch 'A') reassembling the ceiling fan complete after greasing/servicing, oiling testing the same making the fan in serviceable condition ana refixing/ hanging the same complete all as specified and directed by Engineer-in-Charge . Note 1: Cost of Split pins, nut bolts and threading of down rod pipe rates are included in quoted rate

Supply and fix standard ball bearing (No.6201 - 6202, & No.6203) suitable size of ceiling fans 1200/1400 mm sweep to suitable for different make of fans of approved quality including necessary greasing Make :- NBC-117/ SKF/ NORE.

Supply and fix gun metal Bush suitable for ceiling fans /exhaust fan, cabin fan of any make any size complete all as specified and directed.

Supply and fix in replacement of old unsv armature shaft for ceiling fans complete all as specified and directed.

Supply and fix rubber bushes and real type synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans complete all as specified and directed.

Supply and fix in repair complete set MS clamp with nut, bolt, including washers, split pins and rubber real etc of appropriate size for hanging of ceiling fan complete all as specified and directed.

Supply and fix split pins of galvanised iron 1/8" dia 2" long complete all as specified and directed.

Supply and fix body screw and blade screw of ceiling fan off size complete all as specified and directed.

Supply and fix in repair nut bolts & washers of appropriate size for hanging of ceiling fan complete all as specified and directed.

Supply and fix fan hook split type fabricated out of 12mm dia steel bar of length 30cm duly painted with rod oxide old black paint complete all as specified and directed.

Supply and fix in replacement capacitor 2.5 MFD, 230 volts single phase ceiling fan/exhaust fan/cabin fan/pedestal fen incl necessary connection complete all as specified and directed.

All as per item No 72 here-in-before but 3.15 MFD complete all as specified and directed.

All as per item No 72 here-in-before but 4 MFD complete all as specified and directed.

Dismantling electric and water connection of the 25/50 ltr's geyser, taking down from its original position on ground, dismantling geyser complete such as removing tank from its outer body, removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing its thermostat, heating element, and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, rubber gasket & testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete and testing on completion all as directed by Engineer-in-Charge. (Heating element & Aparatus if require to be replaced shall be measured and paid separately) (Nut, bolts and hold fastners if require to be replaced shall be deemed to be included in the quoted rates of this item). Note: All repair shall be carried out on complaint basis and measurement will be made only once through out the contract period irrespective number of repair carried out in same Geyser. All repairs shall be carried out on complaint basis contractor shall be delay to the maintenance and collect complaint slip from concerned JE daily upto 11.00 Hrs

Supply and Fixing heating element any type/size as per site requirement of capacity 2 KW ISI Marked complete all as specified and directed.

Supply and Fixing thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed.

Supply and fix in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed.

Supply and Fixing syphon assembly for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge.

Supply and Fixing pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply and Fixing rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

Supply and fix in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed . ( Note: old unserviceable Geyser will be deposited in E/ M store yard )

Supply and fix PVC enclosure with plug and socket one single pole MCB 240 volts 20 Amp all as specified and directed.

Supply and fix plug top 3 pin 15 Amp in repair complete all as specified and directed.

Material and labour in replacement sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, for sutable suitable size of 100x100mm including making good disturbed surface complete all as specifide and directed

All as per item No 85 here-in-before but 150 x 100 mm complete all as specified and directed.

All as per item No 85 here-in-before but 250x200 mm complete all as specified and directed.

All as per item No 85 here-in-before but 300x250 mm complete all as specified and directed.

Supply and fixing modular switch 1 way 6A,1 module,230 volts all as specified and directed.

Supply and fixing modular switch 1 way 16A,1 module, 230 volts all as specified and directed. ISI marked complete all as specified and directed.

Supply and fixing modular socket combination 6 A, 5pin,2 module ,230 volts all as specified and directed.

Supply and fixing modular socket combination 16 A,6 pin,2 module ,230 volts all as specified and directed.

Supply and fixing modular Fan step regulator, 120W,2 module ,230 volts all as specified and directed.

Supply and fixing bell push 1 module,230 volts all as specified and directed.

Supply and fixing modular white cover plate with frame,1 or 2 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,3 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,4 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,6 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 8 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 12 module ,230 volts complete all as specified and directed.

Supply and fixing Modular metal flush box 1 or 2 module complete all as specified and directed.

Supply and fixing Modular metal flush box 3 module complete all as specified and directed.

Supply and fixing Modular metal flush box 4 module complete all as specified and directed.

Supply and fixing Modular metal flush box 6 module complete all as specified and directed.

Supply and fixing Modular metal flush box 8 module complete all as specified and directed.

Supply and fixing Modular metal flush box 12 module complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Material and labour Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI strip 32 x 6 mm by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium 40mm. bore, and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI strip 32 x 6 mm and 40 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply and fix aluminium strip 32x6mm fixed in ground,on wall, pole with epoxy based insulator for down conductor including drilling two Nos holes at each joint, one set of lead washers between strips two sets GI nut, bolt, washers one set of lead washers between strips two sets GI nut, bolts, washers gutties, screws etc complete all as specified and directed.

Supply and fix Galvanised iron strip 32 x 6mm buried in ground complete all as specified and directed.

Supply and fix air termination single pointed aluminium rod of 12mm dia 300mm long fixed to aluminium strip 25x3mm drilling nuts, bolts washers for resting/supporting of air terminals etc complete all as directed by Engineer-in-Charge.

Material and labour in replacement of GI tubing medium grade, complete with all fittings for installation of post top Lantern fitting of 50 mm bore complete all as specified and directed.

Supply and fix in relacement LED decorative post top lantern for Garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) for coping pole including necessary Steel form work and finishing exposed faces of concrete smooth and even using extra cement all as specified and directed.

Material and labour for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 2 terminals for terminating one incoming and outgoing UG cable of size 6/10 sqmm 2 core and fixed to the Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 nos of single pole MCBs 6-32 amps,10KA inside the box and all as spcd and directed. Make :- Sintex / Hensel

Supply, Installation in replacement, testing and commissioning of metering distribution board indoor/ wall mounting thermoplastic polycarbonate IP-65 in accordence with IEC-60-529 suitable for 415 Volt 3 phase 4 wire 50 Hz AC for housing 4 Nos electric meter of dimension 600x900x180mm and supply system having busbar chamber with copper bus bars duly insuslated by RYB colour 100 amps rating mounted on porcelain insulators and made out of modular polycarbonate thermoplastic enclosuresand enlcosure shall be environmentl freidnly recyclable UV resistant halogen and silicon free anti acid and antio corosive comprising of MCCB 415V 63 Amps 4Pole 16 KA as Incomming type tested as per IEC-61-439-1, load should IK08 (5 Jule) an accordence with IEC-62262 with CPRI approved and 16 Amp DP 10 A MCB 04 Nos of each outgoing and 25sqmm triminal block 08 Nos and incl complete elecric connectin with main incoming LT cable Make: HENSEL/ SIEMEMS/L&T. Note ;(a) Cost of MCCB/ MCBs are included in the item rate. (b) Old electric meters shall be taken down and deposited in E/M store. (c) New Electric meters shall be measured and paid seperaterly.

Supply and fix in repair of tamper proof electronic single phase whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.0 AC supply including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly in meter box on and incl 3 mm thick bakelite sheet. The meter shall work satisfactory with guaranted accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure/L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)

PARADISE INFRA POWER COMPANY

M/s Anamika Enterprises

JS CONSTRUCTION COMPANY

M/S Durvish Mourya

M/s Pradeep Kumar