Improvements to Aditi Restaurant to Kalyan Nagar via Raza-e-mustafa Madrasa & SH-20 Main Road to Veerashaiva B.Ed College in Raichur City Limits. In Raichur taluka, Raichur District. Under 5054-04-337-0-01-154 MDR Road Improvements Fund For the year 2024-25.

Improvements to Aditi Restaurant to Kalyan Nagar via Raza-e-mustafa Madrasa & SH-20 Main Road to Veerashaiva B.Ed College in Raichur City Limits. In Raichur taluka, Raichur District. Under 5054-04-337-0-01-154 MDR Road Improvements Fund For the year 2024-25.

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

Bituminous Macadam Grading - I for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premi...

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with a...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Road Main tenance for 3rd year for road with BM+SDBC as wearing coat .Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road Mainenance of surface drains by ...

Road Main tenance for 4th year for road with BM+SDBC as wearing coat .Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road, Mainenance of surface drains by...

Road Main tenance for 5th year for road with BM+SDBC as wearing coat .Maintenance of Road for 5th year by Clearing and Uprooting Vegetation oneither sides of the road,Mainenance of surface drains by c...

Open Conduit System Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plug...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and she...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.

Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40...

Fabricating supplying and mounting MS box made out 14SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 50Amps

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 63Amps 4 pole

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

GI/Copper strips for grounding connections, using necessary fixing

materials as required. 25X3mm GI Strip"

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends / End-caps of same materials in existing trench as per IS 14930 part -II sui...

Aluminium End Terminal (Lug) 16sqmm

Aluminium End Terminal (Lug) 25sqmm

Brass Cable Gland 25mm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm, ...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. In existing trench/25sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. In existing trench/ 35 to 95 Sqmm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth

upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,

Supplying and Displaying necessary Danger Boards a...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches Tar Road

Decorative light pole : Fabricating,Supplying and errection of 11mtrs long hot dip Galvanized conical pole with BSEN 10025 grade S 355 JO steel plate for Shaft IS 2062 for the base plate with door ope...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.For Foundations of Bridges - 28 x 30 =840 Kgs = 0.84 MT

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

GESCOM Pole Shifting Estimate No 400278 ( PART-A Material Cost )

200105-RCC Pole-9.0M Long,145 kg WL

27901203-4 pin cross arm with pole clam

27901205-11 kV Horizontal cross arm wit

2811101-Guy with Complete set

281683-Spiral Earth Electrode

283008-11kV, 5KN Composite/Polymeric

283320-Silcon rubber composite insula

284108-Rabbit ACSR Conductor

285508-Rabbit to Rabbit (P G Clamps)

289031-PVC Wire-95 Sq.mm

992715-Earthing materials pipe type f

GESCOM Pole Shifting Estimate No 400278 ( PART-B Labour Cost )

a) 9mtrs support (500x500x1700mm)

b) Releasing of Erection of DP structure including fixing of braces insulators etc., as per the approved drawings and specifications (excluding the cost of excavation, backfilling and concreting)

b) Relesing of 100 kVA Transformer on Transformer structure.

Releasing & Restringing/Tightening of loose spans b) Rabbit

Releasing and Erection of RCC/PCC poles

Releasing Of (a) Wiring of One circuit of LT Wiring Kit for for 25/63/100 KVA DTC to the existing LT protection Kit Kit / Distribution Box via metering box.

Releasing Of Fixing of 4 Pin cross arm with insulator and Braces fixing.

Releasing Of Fixing of GOS including wiring (11kV SB 200A)

Releasing Of Fixing of LT Protection Kit

Releasing Of Fixing of V- Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Fixing of 4 Pin cross arm with insulator and Braces fixing.

Fixing of V- Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,)

For Rabbit ACSR

Wiring for lightinh/power circuit using one of PVC insulated 1100v grade stranded Aluminum unsheathed wire 4 Sq mm single core/multi core cable in open or cocealed system of wiring (10/521)

LabourEarthing materials pipe type for grounding

GESCOM Pole Shifting Estimate No 400839 ( PART-A Material Cost )

200120-Pre-Stressed Tubular Spun Pole

279037-33 kv Horizontal cross arm as

2811101-Guy with Complete set

283434-33kV Polymer Pin insulator

284116-Coyote ACSR Conductor

GESCOM Pole Shifting Estimate No 400839 ( PART-B Labour Cost )

b) 11 mtrs Spun pole (1000*1000*2500mm)

b) 390mm all around the pole for an height of 300mm for Spun poles

c) Pole base 11mtr spun pole (1000x1000x150mm)

Releasing of Fixing of V-shape / Horizontal cross arm including single top support Braces and insulators fixing

Releasing of RCC poles 9.5 mtr long 350Kg WL but in a pit of 2.0 mtr depth for 33KV lines

Tightening of loose spans c) Cyote

Erection of 11mtr long Concrete spun pole in a pit of 2.5 mtr depth

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangements as per approved drawing. (Excluding excavation of PIT)

for Coyote ACSR