Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC 9 463 SANA MANZIL PUNNAPRA PO ALAPPUZHA 688004 | ALAPPUZHA | ALAPPUZHA | KERALA | 688004 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹9.2 L+₹72,379.03 (8.57%)Rejected-AOC | L2 | Rejected-AOC Second Lowest | |
| 3 | L3₹9.7 L+₹1.3 L (15.2%)Rejected-AOC | L3 | Rejected-AOC Third Lowest |
Tender Value
₹9.7 L
EMD Value
₹24,313
Closing Date
25 Sept 2024, 4:00 pmClosed
Assistant Executive Engineer
O/o the Assistant Executive Engineer, P.W.D.Buildings Sub Division,Cherthala,688524
GENERAL-Providing cupboard work and Urgent special Repairs at Govt. Childrens Home for girls and Child Welfare Committee ,Mayithara, Cherthala-cupboard work-General Civil Work - 11 E Tender
2024_PWD_691226_1
PWD/BLDG/TR/2739
Open Tender
Civil Works - Buildings
Item Rate
90 days
Mayithara
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,145
₹24,313
22 Oct 2024
13 Sept 2024
28 Sept 2024
13 Sept 2024
25 Sept 2024
13 Sept 2024
Amount
civil work
OD13155/2022-2023:Providing counter using 17mm thick MDF board with both sides decorating lamination including drawer key board tray, shutter including all cost conveyance, labor charge etc. complete as per the direction of dept. officers at site excluding cost of fittings.
OD30794/2022-2023:Providing counter using 16.75 mm thick HDHMR board with table and cupboard including drawer key board tray , shutter bincluding all cost conveyance , labour charge etc. complete as per the direction of dept. officers at site excluding cost of fittings.
OD59/2022-2023:Providing and fixing good quality hinges (Auto closed) with necessary screws including all cost conveyance etc. complete as per the direction of departmental officers at site
9.81.3:Providing and fixing bright finished brass handles with screws etc. complete:75 mm
9.79.1:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD115818/2024-2025:Providing at all heights, levels and locations 0.4 mm thick Aluminium profile troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge,labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost ofpurlins, rafters and trusses.0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm. (Observed data from Item no. 12.50)
OD30797/2022-2023:Providing and fixing 20 cm wide , .31 cm overall semi circular plain PVC gutter with iron brackets 40 x 3 mm size , bolts , nuts and washers etc., including making necessary connections with rain water pipes complete.
OD61/2022-2023:Engaging Plumber for repairing and refixing the dislocated pipe fitting and drainage system
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
17.19.1:Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity- white
18.58.1.1:Providing and fixing PTMT grating of approved quality and colour. Circular type100 mm nominal dia
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
OD56/2022-2023:Carpenter engaged for petty repairs
50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop
9.97.3:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
17.32.3:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
OD16467/2022-2023:Supplying plastic waste bin
OD19115/2022-2023:Engaging scavenger for cleaning septic tank
14.83:Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
16.89:Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
OD24900/2022-2023:Supplying and fixing Standard Quality water Filter R.O. MW 140NP including cost and conveyance etc complete as per the direction of departmental officers at site
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD28918/2022-2023:Providing and fixing GI 0.5 " square welded mesh including all cost ,conveyance charges, labour charges etc .complete as per the direction of departmental officers at site
OD28929/2022-2023:Providing counter using 17mm thick MDF board with both sides decorating lamination including drawer key board tray, shutter including all cost conveyance, labor charge etc. complete as per the direction of dept. officers at site excluding cost of fittings.
OD28930/2022-2023:Providing and fixing good quality hinges (Auto closed) with necessary screws including all cost conveyance etc. complete as per the direction of departmental officers at site
9.79.1:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm
9.81.3:Providing and fixing bright finished brass handles with screws etc. complete:75 mm
OD28992/2022-2023:Supplying and fixing Standard Quality water Filter R.O. MW 140NP including cost and conveyance etc complete as per the direction of departmental officers at site
ABDUL RAHIMAN NISSAMUDEEN
HARSHAN K G
Bidder Name
HARIFUDEEN
ABDUL RAHIMAN NISSAMUDEEN
HARSHAN K G
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1075959.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .