BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

Total Amount Rs:-

SR. NO. ITEM DESCRIPTION QUANTITY UNIT RATE AMOUNT

Excavation for well including removing and spreading the excavated

1.00 stuffs directed with all lead - 0.00 TO 1.50 MTR - All fost Soil & Soft 231.24 Cu Mt 147.20

1.01 ---As Above---Hard Murrum 154.16 Cu Mt 213.90

1.02 ---As Above---1.50 to 3.00 mtr - Hard Murrum 357.47 Cu Mt 228.85

1.03 ---As Above---3.00 to 4.50 mtr - Hard Murrum 330.39 Cu Mt 244.95

1.04 ---As Above---4.50 to 6.00 mtr - Soft Rock 304.16 Cu Mt 364.55

1.05 ---As Above---6.00 to 7.50 mtr - Soft Rock 263.02 Cu Mt 386.40

1.06 ---As Above---7.50 to 9.00 mtr - Hard Rock 254.24 Cu Mt 860.20

1.07 ---As Above---9.00 to 10.50 mtr - Hard Rock 230.55 Cu Mt 895.85

1.08 ---As Above---10.50 to 12.00 mtr - Hard Rock 195.99 Cu Mt 933.80

1.09 ---As Above---12.00 to 13.50 mt r- Hard Rock 175.35 Cu Mt 970.60

1.10 ---As Above---13.50 to 15.00 mtr - Hard Rock 128.17 Cu Mt 1009.70

1.11 ---As Above---15.00 to 16.50 mtr - Hard Rock 108.57 Cu Mt 1046.50

1.12 ---As Above---16.50 to 18.00 mtr - Hard Rock 50.89 Cu Mt 1084.45

Providing and casting in situ C.C. in grade M-15 (approx. corresp. to

prop. 1:2:4) (proportions as per mix design or as per Table 9 of 1S456

2000 in masses by weigh batching ) using granite, quartzite trap metal

of size 6 mm to 20 mm for RCC work,including scaffolding centering,

forn work, needle vibrated consolidation, curing comp. up to 6 meter

deplh or hei;iht (excluding cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering etc. comp. for structure for

olher than water retaining Footing (without form work)

Providing and cast in situ C.C. in grade M-30 proportions of ingredients

as per mix design by weigh batching using grariite, quartzite trap metal

of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding

3.00 centering formwork, needle vibrated consolidation. curing and 81.31 Cu MT 9444.95

hydraulic testing etc. complete (excluding cost of reinforcement) with

centering and shuttering/deshuttering etc. comp. up to 6 meter height

/depth Av. G.L.for all water rataining structures - For Raft /Slab

3.01 ---As Above---Vertical Wall 235.82 Cu MT 9295.45

3.02 ---As Above---Beam 12.38 Cu MT 9758.90

3.03 ---As Above---Columns 7.60 Cu MT 10714.55

3.04 ---As Above---Lintel and Chajja 1.44 Cu MT 9758.90

Supplying cutting, bending, binding and placing in position steel as per

plan andesign and as per ISS 2502 including cost of steel and binding

4.00 wire for reseNoirslstructures only including ift up to 6 meter height or 60.44 MT 90363.55

depth below G.L. for all diameters Do-CRS steel all diameter Fe

500grade confirming to relevant I.S

Filling available excavated earth (excluding rock) in trenches, plinth,

5.00 sides of foundations consolidating each deposited layer by ramming 1945.29 Cu Mt 130.39

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

6.00 Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional - Extra 31.87 Cu Mt 4320.08

for brick work in superstructure above plinth level upto floor two level

(B) Conventional

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET

SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION WORK OF PUMPING STATION AT SAKET PS

SR. NO. ITEM DESCRIPTION QUANTITY UNIT RATE AMOUNT

Cement plaster 20 mm thick in C.M. 1:2 using water proofing

compound of approved quality including finishing etc. complete.

20mm thick sand faced cement plaster on walls uptoheight 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3

8.00 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1- 249.73 Sq Mt 335.65

cement : 1-sand) etc. complete.

Finishing wall with water proofing cement paint of on wall surfaces

(Two coats) to give an approved brand and manufacture and of

required shape even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powered materials

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially

10.00 designed pipe shaft with bracket plates, guide channels and 5.00 Sq Mt 3503.41

arragements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm.

11.00 size including anodized alluminium fixtures and fastenings including 12.60 Sq Mt 4989.65

primer coat of approved quality and two coats of oil painting etc,

complete. (III) Partly panelled and partly glazed

Providing and fixing glazed louvered glass windows and ventilators with

12.00 teak wood frame 10cm. x 7cm. Size including 3 coats of oil painting to 3.60 Sq Mt 4143.57

wood work etc.complete. For Ventilation

Providing and fixing M.S. round or square bars with M.S.flats at

13.00 required spacing in wooden frames of windows and clerestory 540.00 Kg 69.22

Providing and laying polished Kota stone slab floorin over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 laid over and jointed with grey cement slurry including

rubbing and polishing etc. complete. (B) 30 mm thick

Providing & Fixing 50 cm wide MS Ladder fabricated form MS Flats

mm x 75 mm With 20 mm dia steel bars steps in double rows @30 c/c

15.00 The include stays of 10 mm x 50 mm flats fixed at 3 meter c/c with 46.00 Rmt 2950.00

welding anchoring and 3 coats anticorrosive paints MS Ladder With

Providing and fixing 25 mm x 5.2 mm MS Railing with three Horizontal

raws and posts of angle ion of size 65 mm x 65 mm x 8 mm RCC

mm and 1.15 Meter Height and placed at 1.85 mt c/c Including

painting two coats and anchorages in cc etc complete

Purchasing & supplying at site of works, with Railway freight, loading,

17.00 unloading, carting, etc. complete such as joints, channels, angles, iron 7.22 MT 64838.00

rails, etc - Do MS Flat Various Thickness

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET

SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION WORK OF PUMPING STATION AT SAKET PS

SR. NO. ITEM DESCRIPTION QUANTITY UNIT RATE AMOUNT

Labour charges for lowering laying, erecting, fixing, various size of M. S.

18.00 section such as joints channel, angles plates etc. complete :- Do With 7.22 MT 13069.75

Providing and supplying ISi Standard R.C.C. pipes(of Sulphate Resisling

Cement) in standard lengths of following class and diameter suitable

for either collar joints or rubber ring joints Including oll taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading. conveyance to departmental stores, stacking etc.

complete. (IS. 458/ 1989) - 500 mm Dia RCC NP3 Pipe

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following

diameters in proper position, grade and alignment at all level as

20.00 directed by Engineer-in-charge including conveyance from stores to 25.00 Rmt 217.35

site of work, labour, giving hydraulic testing as per ISi code. - 500 mm

Supply, Installation, Testing and Commissioning of Manuall Bar Screen

with trash rack upto plinth level having bar size of 10 mm x 50 mm and

clear spacing between bars of 25 mm, MOC SS-304 and lifting hook etc

with all required accessories and hardware.

Size : 900 mm X 900 mm

Providing and fixing Water Level Indicator or depth gauge painted on

TW plank 25 mm I MS plate 4 mm thick float, level indicator sliding

wire on standard pulleys incl. necessary arrangement to prevent the

swinging etc. complete with calibration up to 5 mt height

Providing and fixing copper lightning arrestor incl. copper strip and

23.00 earthing plate etc. complete (incl. cost of excavation for earthing plate 50.00 Kg 1009.70

etc. rate per kgs of copper).

Dewatering by pumping set of required capacity including temporary

24.00 platform carting pumping at site and fixing the same in position 75000.00 HP/Hr 18.32

including all accessories. and fuel and labour etc. complete.

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. Work

Demolition of Brick work and stone masonry including stacking of

26.00 serviceable materilas and disposal of unserviceable materials with all 10.00 Cu Mt 536.09

lead and lift.(ii) In Cement Mortar.

providing fabricating and fixing /installing C.I. gates of size as per

27.00 design with operating handle etc.for by pass arrangement with ISi 2610.00 Kg 94.30

Mark - CI Gate :- 900 mm x 900 mm

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

MECHANICAL SECTION

SUBMERSIBLE SEWAGE NON-CLOG VERTICAL PUMP :-Supply, installation, testing & commissioning of sewage submersible,

non clog type suitable for working on three phase, 50 Hz ± 3%,415 V ± 10%, AC supply, 1450 RPM synchronous speed with

core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with

echanical seal, bearing bush, strainer etc. complete set & following M.O.C:Casing: CI, Impeller: SS CF8M, Wearing ring &

Bearing bush: Bronze, TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS motor body. - 40 HP

SLUICE VALVE :-Providing and Supplying ISI Mark CI D/F Sluice Valve as Per IS :14846 ( Latest Edition ) of following class and

2.00 diameter including all taxes insurance , Transportation , Freight Charges, Octroi, Inspection Charges, Loading , Unloading 2.00 Nos 9813.00

Conveyence To Departmental stores Stacking Etc Compl.e PN 1.0 IS 5312 With ISI Mark - 200 MM DIA NB

2.01 ---As Above--- 250 MM DIA NB 4.00 Nos 15920.00

2.02 ---As Above--- 450 MM DIA NB 1.00 Nos 53384.00

REFLUX VALVE :- Providing and Supplying ISI Mark CI D/F Reflux Valve as Per IS :14846 ( Latest Edition ) of following class

3.00 and diameter including all taxes insurance , Transportation , Freight Charges, Octroi, Inspection Charges, Loading , 2.00 Nos 15929.00

Unloading Conveyence To Departmental stores Stacking Etc Complete - 200 MM DIA NB

3.01 ---As Above--- 250 MM DIA NB 4.00 Nos 26759.00

3.02 ---As Above--- 450 MM DIA NB 1.00 Nos 88580.00

Lowering , laying and Jointing In Position following C.I/D.F RefluX Valves , Butterfly valves, Sluice Valves and air valve

4.00 including cost of labour , Jointing , Material, including Nut bolts and giving Satisfoctory Hydraulics testing etc complete:- 4.00 Nos 853.30

4.01 ---As Above--- 250 MM DIA NB 8.00 Nos 1087.90

4.02 ---As Above--- 450 MM DIA NB 2.00 Nos 3174.00

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

MS PIPE :- Manufacture, Supply & Delivery of Electric Resistance welded ( Up To 400 mm ) Submerged Arc Welded ( Above

400 mm )MS Pipe Having Beveled ends Plate or Coil Confirming To IS-3589-2001 Or Its Latest Revision/ ammendment for

following Thickness outside diameter at GWSSB store or Site anywhere in Gujarat state Including all taxes, Insurance,

5.00 Transportation, Freight Charges Octroi , Inspection Charges , Loading Unloading Conveyance To Departmental Stores , 6.00 Rmt 2675.00

Stacking Etc All Complete.) - I/S Epoxy Painting (100 Micron ) & O/S Gunniting 25 mm - 219.1 mm 6.3 mm Thickness

5.01 ---As Above---273.0 mm 5.0 mm Thickness 16.00 Rmt 2754.00

5.02 ---As Above---457.0 mm 6.3 mm Thickness 8.00 Rmt 5631.00

MS PIPE LAYING :- Lowering , Laying and Jointing CI S & S Spun suitable for Tyton Joints / Mortar Lined DI Pipes of various

6.00 Classes With CI.MS Specials of following Diameterd in proper Position Grade and Allignment as directed By Engineer in 6.00 Rmt 248.40

charge Including Hydraulic testing Etc Complete. - 219.1 mm 6.3 mm Thickness

6.01 ---As Above---273.0 mm 5.0 mm Thickness 16.00 Rmt 288.65

6.02 ---As Above---457.0 mm 6.3 mm Thickness 8.00 Rmt 449.65

7.00 MS Specials : MS SPECIAL PLAIN & SOCKET Up To 300 mm dia. & Above 300 mm Dia 500.00 Kg 96.00

7.01 ---As Above---Above 350 mm dia 500.00 Kg 96.00

Single Girder EOT Crane : Supply, installation, testing & commissioning single girder type fully electrically operated EOT

crane with electrically operated hoist,class II duty, geared travelling trolley with seven meter lift complete with long travel

rail track (40 mm sq. bar), moving or cross girder, allthree motions electrically operated by suitable rating motor IP

control panel & down pendant control block, brake, safety device,cables form motor to starter panel & other required

accessories & tested as per IS Specifications.- 2 Tonne 9 To 12 Mtr Span

EXPANSION BELOWS :- Supply , testing & commissioning of flange ends expansion belows as per EJMA standards of overall

9.00 length minimum 300 mm . Designed for 15 mm axial Compression and 5 mm Axial extension with tie road etc of following 4.00 Nos 6216.00

MOC & Pressure ratings- 200 mm NB

9.01 ---As Above---250 mm NB 6.00 Nos 7745.00

9.02 ---As Above---450 mm NB 2.00 Nos 18780.00

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display,

±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP

67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window enclosure,

Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter communication etc alongwith wall

mounted/ stand mounted cabinet. Full Bore Electromagnetic Flow Meter (Regular Power Operated)- PN 1 - 450 mm NB

PRESSURE VACCUM GAUGES WITH ACCESSORIES :-Design, Supply, Installation, Testing, Commissioning of Diaphragm

sealed Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case

with Bayonet Type Bezel, SS316 L Diaphragm

SS316 Bottom Housing Material, SS 316 Movement material, Aluminium dial with black graduation on white background,

Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624 - 100 mm

Dial Size 0 to 1 Kg/cm2

Ultrasonic Type Level Transmitter with Integral Display :

Design, Supply, Installation, Testing and Commissioning of NOn Contact Ultrasonic Type Level Transmitter with

IntegralDisplay.

Sensor with Head Mounted Transmitter:

12.00 The sensor should be non contact type, field mounting type, housing shall have minimum IP65 protection, PP/ PVC 2.00 Nos 59723.00

SensorMOC, Microprocessor based indicator with LED / LCD digital display,panel/ wall mounting type, power supply shall be

Accesories: Mounting bracket, nut, bolts etc as per system requirement and Hook up diagram of the InstrumentsLevel

Transmitter shall be suitable for following Range. -0 To 15 Mtr Range

ELECTRICAL SECTION

Auto transformer starter suitable for local & remote pump control application consisting of Auto Transformer (vacuum

impregnated, air cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB / MPCB, overload relay and

13.00 contactors as per Type II coordination including digital MFM with RS 485 communication port, analogue type ammeter with 2.00 Nos 37804.00

selector switch, run hour meter, required protective relays & control accessories. - 100 HP (1Working+1Stand by_- ATS

From 46 to 50 HP

13.01 ---As Above---ATS FROM 71 TO 80 HP 4.00 Nos 65760.00

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free

mechanism, current limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable

14.00 settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & 1.00 Nos 43183.00

interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x

600 (D) & following technical features:

4 Pole, 160A MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor release

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

15.00 MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase 1.00 Nos 1911.93

horizontal type outgoing Per phase isolation type (PPI) 6 wAY

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected

as directed. 40 Amp Cat - III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (a) 6 to 32 Amp. Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat III

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary

clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement)

conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

3.5C x 120 sq. mm. A2XFY Cable (1Run for Incomer)

17.01 ---As Above---3.5C x 25 sq. mm. A2XFY Cable (1Run for Panel) 6.00 Mtr 134.00

17.02 ---As Above---3C x 70 sq. mm. A2XFY Cable (1Run each for 2nos. Motor) 6.00 Mtr 243.00

17.03 ---As Above---4C x 6 sq. mm. A2XFY Cable (For LDB cum PDB) 6.00 Mtr 78.00

17.04 ---As Above---3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor light / St. Light) 6.00 Mtr 61.00

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

17.05 ---As Above---3C x 2.5 sq. mm. 2XWY/2XFY Cable (3 Nos. Motor space heater(as required), for 1nos.CT) 6.00 Mtr 61.00

CABLE END TERMINATION AND CONNECTION:

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for

18.00 3½ & 4 core cables of following type & sizes: & Cable Terminals (Lugs) Providing & fitting crimping type Cable Terminals 4.00 Mtr 405.00

(Lugs) conforming to IS of following types and sizes

3.5C x 120 sq. mm. A2XFY Cable (1Run for Incomer)

18.01 ---As Above---3.5C x 25 sq. mm. A2XFY Cable (1Run for Panel) 2.00 Mtr 206.00

18.02 ---As Above---3C x 70 sq. mm. A2XFY Cable (1Run each for 2nos. Motor) 2.00 Mtr 278.00

18.03 ---As Above---4C x 6 sq. mm. A2XFY Cable (For LDB cum PDB) 2.00 Mtr 25.00

---As Above---3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor light / St. Light)

18.05 ---As Above---3C x 2.5 sq. mm. 2XWY/2XFY Cable (3 Nos. Motor space heater(as required), for 1nos.CT) 6.00 Mtr 20.00

Supply & laying GI perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thk sheet steel in the

standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including

19.00 accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, 8.00 Mtr 336.00

erected on existing support as per specification and instruction of Engineer-in-charge.

150 (W) x 50 mm (H) X 2 mm Thick - Ladder type

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

CHEMICAL EARTHING SYSTEM

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

20.00 following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate 2.00 Nos 7095.25

including value of earth resistane of installation. [B] For Electrical installation up to 11 KV

located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT deep GI Strip including supply & fixing using GI spacers, saddles when

laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with

20.01 earth pit & all electro-mechanical equipments. 70.00 Kg 77.77

(50X6 G.I Strip wt.2.3 kg/m, 2.3x30Mt.=69kg.)

Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT deep GI Strip including supply & fixing using GI

spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building

20.02 & interconnection with earth pit & all electro-mechanical equipments. 12.00 Kg 77.77

(25X3 G.I Strip, 0.6 Kg/m, 0.6x20Mt.=12Kg

Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when

20.03 laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with 40.00 Kg 794.87

earth pit & Tr. nutral. (40X6 Cu. Strip, 1.88 Kg/m, 1.88 x 20m=38 Kg.)

SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB cum PDB etc.)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

INTERNAL WIRING

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

21.00 type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 25.00 Rmt 82.82

stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

21.01 stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories 25.00 Rmt 90.90

(e) 4 wire 1.5 sq. mm

SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are

of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, pipe to be erected concealed in flushed on

wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC

Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D.

connector as directed with medium class Rigid PVC pipe & accessories.

SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to

21.03 be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity 3.00 Pt 313.10

connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

SITC Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of co-extruded polycarbonate channel with diffuser part in needed opal finish

with company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

21.05 Luminaire efficacy> 85 lumens/watt ,LED 4.00 Nos 295.93

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral

driver (ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >=

21.06 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder 3.00 Nos 404.00

30W Lamp (For Panel room)

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

21.07 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in 2.00 Nos 1596.81

Supplying and erecting approved make Bracket fan of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall

or with lead Cores and connections complete. Cat--II

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

EXTERNAL LED LIGHT FIXTURES & LIGHTING:

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (i) above 40 to 48 watts -Cat -III

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm

22.01 thick M.S. base plate, erected on wall or corner for mounting street light luminaire with necessary hardware materials duly 2.00 Nos 343.40

SAFETY ACCESSORIES

23.00 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 2.00 Nos 8671.86

x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage,

23.10 medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or 2.00 Nos 299.97

similar) etc. (All above contents shall be of standard makes)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SITC OF ELECTRO MECHANICAL WORK IN SAKET PUMPING STATION AND MAHESHWARI PUMPING STATION

Sr. No. Description Qty Unit Rate Amount

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment

of person suffering from Electric shock with minimum 50" diagonally size. ( For LT Room )

23.30 Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm 2.00 Sq MT 1027.17

Existing Pump Removal and Other Head Works Fixing Of This Removal Of Pump - 30 HP - Sewage Submersible Vertical

Total Amount Rs:-

Total Amount Rs:-

Say Amount Rs:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR PROPOSED RISING MAIN FROM SAKET SPS TO MAHESHWARI SPS WITH PUMPING STATION AND MACHINARY IN SAKET

SPS FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION WORK OF ASPHALT ROAD IN SAKET PUMPING STATION TO MAHESHWARI SPS

SR. NO. ITEM DESCRIPTION QUANTITY UNIT AMOUNT

Construction of 150mm thick Granular Sub Base (Grading I) by providing

coarse graded Black Trap material, mixing by machanical means / rotavator,

1.00 spreading in uniform layers with motor grader as per required slope and 354.00 Cu Mt 1387.13

gradient on prepared surface and compacting with vibratory roller at OMC

to achieve the desired compaction complete as per MORT & H clause

Providing & laying spreading and compacting 150mm thick WBM Grade - II

of B.T.M.C. metal 25mm to 90mm size (hand brocken) including using 20%

(13+7%) filler i.e. stone screeing 13.2 mm at the rate 0.16 Cumt. &

stone dust including spreading in uniform thickness hand packing rolling

2.00 with vibratory roller8-10 tonnes in stages to proper garde and cmaber 236.00 Cu Mt 1512.66

applying and brooming required types of screening/binding materials to fill

up the interstices of coarse aggregate watering and compacting to the

required density.

Providing & laying spreading and compacted stone aggregate to wetmix

macada 10cm th. As per sprecification including premixing with water in

3.00 machinemix plant, carrige on road materals by tripper laying in uniform 236.00 Cu Mt 1064.07

layers with paver, base of coarse vibretor roller to the face and vibreter

achive the dry.

Providing and laying 50 mm thick compacted D.B.M with B.T. stone

aggregates as per MoRT&H gradation & specification ithEmulsion (RS-1) for

tack coat @ 2.5 kg/10smt and bitumen grade VG - 30 for mixing at the rate

of 45.00kg/MT by weight of total mix i.e (4.50 % by weight of total , heating

the asphalt VG-30 and aggregates by continuous batch mix plant &

4.00 spreading the same by paver finisher including rolling & consolidation with 814.20 MT 3477.43

10-12 tones vibratory and power roller & providing all materials,

equipments, tools & plants, fire wood, oil, erosene, labour charges etc. and

using ontractor's own machineries drum mix plant and paver finisher etc.

Providing & laying 30mm thick Compacted Bitumine Concrete(BC)

(including Saline nanotechnology 0.1% of bitumen) with BT aggregate as

per M.O.R.T.&H.gradation & asphalt grade VG-30 for mixing at the rate of

55 Kg./M.T. i.e. 5.50% of total weight of total mix including heating the

aggregate & asphalt in continuous batch mix plant & spreading the same by

5.00 sensor paver finisher & consolidation with vibratory roller & flushing sand 467.28 MT 3849.11

@ 0.30 Cum/ 100 Smt. including providing all materials wquipments, tools

& plants, fire wood, oil, kerosene, labour charges etc complete using

constractors own machinery drum mix plant & paver finisher etc complete.

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad