SPL REPAIR TO PERMIETER LIGHTS AND MAST LIGHTS AND SPL REPAIR TO UG LT CABLE AND CERTAIN EM SERVICES AT AF STN MANDORE

Amount

Dismantling street light fitting/flood light of any shape/wattage complete all as specified and as directed.

Dismantling junction box compete complete all as specified and as directed.

Dismantling Bracket made out GI pipe 40mm dia complete all as specified and as directed.

Dismantling PCC poles complete all as specified and as directed.

Excavation in trenches n.exc 1.5 Mtr wide and n.exc 1.5 Mtr in depth in hard/dense soil and getting out complete all as directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as directed.

Removal of excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&L sand cushioning / filling for underground cable protection, filling under floors ,consolidated and compacted with clean dry sand complete all as specified and as directed.

M & L stone Slab 40 to 50 mm thick rough dressed jodhpur stone patties/ slab cover in trenches for protection of cable 25 to 30 CM wide and thickness not less than 50 mm in length lay dry abutting each other with gap between adjacent slab not exceeding 10 mm over sand cushioning.

Taking out defective LTUG cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor from trenches, shifting serviceable cable 4 core 16 sqmm for relaying or taking the unserviceable cable as credit complete all as specified and directed for the following:- (Note: Excavation and earth work shall be measured and paid for separately.)

All as per itme No 10 above but 3.5 core 25 Sqmm

All as per itme No 10 above but 3.5 core 35 Sqmm

All as per itme No 10 above but 3.5 core 50 Sqmm

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 4 core 16 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

All as per itme No 14 above but 3.5 core 25 Sqmm

All as per itme No 14 above but 3.5 core 35 Sqmm

All as per itme No 14 above but 3.5 core 50 Sqmm

S & F tube light grade galvanized of size 50 mm dia with all fittings fixed with cable /wall/under road crossing for protection of cable

Supply and fix steel tubular swaged poles (ISI Marked ) type 410 SP-22 (9.0 meter long) complete with CI base plate and finial including foundation and coping and painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F and testing of energy efficient LED street light fitting of 72 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed.

S&F and testing of energy efficient LED Flood light fitting of 200 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection of complete all as specified and directed .

M&L HERITAGE LED Post Ideal to lit up parks, garden ways and heritage sites 20 Watts complete all as directed by Engr-in -Charge Make :Crompton cat pat no -LPTH-20-CDL or eqult Havells/Bajaj

S & F GI Bracket for mounting street light fittings made out of light grade 32mm GI pipe and have angle of 120 degree incl fixing arrangement complete all as specified and as directed by engr-in-charge.

S&F FRP junction box for street light central with linked door control incl 6 amp MCB SP with aluminium bus bar-04 nos of 100 amp cap for controling street light complete as directed by Engr-in-Charge

Supply and fix single core PVC insulated FR cable with multi stranded copper conductor 1.5 sq mm cross sectional area 3 core ,1100 volts grade all as specified and as directed.(Note-3 core 1.5 sqmm wire run through 25 mm pvc pipes with suitable clamp and nut bolts.)

S&F and testing of energy efficient LED street light fitting of 60 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed.

Material and labour for painting with two coats of synthetic enameled paint on LT PCC pole upto 1.5 mtr above the GL in alternatively black and white strap of 30 cm each after scrapping/ removing the existing paint and the preparation the surface of PCC LT pole complete.

S & F mild steel cross arms, bracing supports clamps and back plates fabricated from MS flat 50x6 mm and 30x6 mm from structure steel section including GI nut, bolt and washers including welding, bending cold or hot drilling hole for bolts in any shape and size as indicated and directed inclusive of one coat of red oxide incl painting zinc chromate primer and two coat of aluminium paint all as specified.

M&L for repair of mechanism of highmast and rewinding of three phase high mast tower motor 440 volt AC 1HP 1425 RPM if burnt and incl dismantling form highmast transportation to workshop for rewinding with existing size of super enamlled copper wire replacing of gear,bearing bush ,greashing varnishing etc for running of rope at satisfactory level and reinstalation complete all as specified and as directed.

M & L for PVC insulated copper conductor 4 sqmm 10 core complete all as specified and as directed.

Material labour for Emergency bell 230 volt AC complete all as specified and directed

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in foundation of poles etc filling and mess concrete complete all as specified.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC conduit pipe with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :-(a) One light point controlled by one one way switch

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 4 way single pole & neutral link

M&L MCB single pole 40 Amps, 240 V .

M&L MCB single pole and neutral 40 Amps, 240 V.

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

Taking out defective LTUG cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor from trenches, shifting serviceable cable 3.5 core 120 sqmm forr taking the unserviceable cable as credit complete all as specified and directed .

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 3.5 core 120 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 3.5 core 400 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

M & L for GI tubing Light grade 100 mm incl all accessories for protection cable complete all as specified and directed in engr-in-chage

M & L for GI tubing Light grade 80 mm incl all accessories for protection cable complete all as specified and directed in engr-in-chage

M/L for raod cutting, including excavation returning filling in spreading levelling, well rammming in layers, soiling with broken boudders/ stones, WBM 7.5cm thick coarse aggregate received from dismentling the existing road, premix carpeting 25mm thick using ready mix patch mate material, rolled and compacted for road patch repair work.

Nvimal Engineers and Contractor