Development of Ambapani Eco-Tourism Site, At. Vyara (Construction work of Dormitory)

No figures

1 Excavation for foundation upto 1.5M depth including sorting out and stacking of

useful materials and disposing of the excavated stuff up to 50M. Lead (P.No. 49, Code

No. 04001B, I.No. 0) (B) Dense or Hard Soil 223.00 Cumt. 153.40

2 Excavation for foundation upto 1.5M depth including sorting out and stacking of

useful materials and disposing of the excavated stuff up to 50M. Lead (P.No. 49, Code

No. 04001E, I.No. 0) (B) Hard Rock 57.00 Cumt. 605.39

3 Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 Machine

cut stone aggregate 40mm nominal size ) and curring complete excluding cost of

formwork in (a) Foundation and plinth 36.00 Cumt. 3199.68

4 Providing & Laying controlled cement concrete M-250 and curing complete

including the cost of formwork and Excluding the cost of reinforcement for

reinforced concrete work in (A) Foundation footing base of column and mass 60.00 Cumt. 4686.59

5 Filling available excavated earth (excluding rock) in trenches. plinth, sides

of foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering. 214.00 Cumt. 133.65

thickness including watering, ramming and consolidating etc. completed.

7 Providing & Laying controlled cement concrete M-250 and curing complete

including the cost of formwork and exluding the cost of reinforcement for reinforced

concrete work in Beam (C) Slabs, Landings, Shelves, Balconies, Lintel, Beams, Girders

and Cantilever upto floor two level. G.F.

8 Providing & Laying controlled cement concrete M-250 and curing complete

Including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in Lintel (C) Slabs, Landings, Shelves, Balconies, Lintel,

Beams, Girders and Cantilever upto floor two level. G.F.

9 Providing & Laying controlled cement concrete M-250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in Column (D) Columns, Pillars posts and struts upto floor

two level G.F.

10 Providing & Laying controlled cement concrete M-250 and curing complete

Including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in Slab (C) Slabs, Landings, Shelves, Balconies, Lintel,

Beams, Girders and Cantilever upto floor two level. G.F.

11 Providing & Laying controlled cement concrete M-200 and curing complete

Including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in Stair Case (E) Staircases excluding landing up to floor

two level. G.F.

Item Rate In

Description of Item Quantity Unit Amount

No figures

12 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level G.F. 19268.00 Kg. 77.28

13 (iii) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations,plinth ans Superstructure in Lime Mortar 1:1.5 (1-

Lime : 1.5-coarse sand including levelling up etc. complete Extra for brick work in

superstructure above plinth level upto floor two level (B) Conventional

14 (i) Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand) in foundation and plinth (B) Conventional 258.00 Sqmt. 656.33

15 Pointing on Uncoursed stone masonry with cement

mortar 1:3 (1-cement : 3-coarse sand)(B) Ruled pointing G.F. 1599.00 Sqmt. 111.05

16 Providing 15 mm thick cement plaster in single coat on fair side brick/concrete wall

for interior plastering up to floor two level finished even and smooth in with

Floating coat of neat cement. (i) cement Mortar 1:3 (1 cement : 3 Sand). 676.00 Sqmt. 218.01

17 Providing 10mm thick cement plaster in single coat on brick/concrete walls for

interior plastering upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) Extra over items 58 to 64 for finishing with a floating

coat of neat cement slurry.

18 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5

- coarse sand) laid over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

19 Granite Sill & Jambs

Providing and laying 18 mm thick polished granite stone machine cut in single piece

(Max. available) in tread,Riser, sill and jambs of door/window frame laid over

mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey

cement slurry with matching pigment incl. rubbing and polishing rounding edge etc.

complete colour and shed as approved by architect engineer in charge

20 Labour Charge Full Round Edge for Granite 553.00 Rmt. 51.51

21 Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and

landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand)

pointing in white cleaned jointed with white cement slurry 96.00 Sqmt. 891.90

22 Providing and laying white glazed tiles 6mm thick skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry.

23 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Item Rate In

Description of Item Quantity Unit Amount

No figures

24 Provoding and fixing flush door shutters, solid core construction with frame of first

class hardwood with cross board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B) Non-decorative type

and block board core anodised alluminium butt hinges in flush door shutters (2) 35 29.00 Sqmt. 1829.73

25 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with injected fire retardant grade polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium fixtures & fastenings & fastener sleeve.

26 Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc

27 Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer in 18115.00 Kg. 131.14

28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor

or the side of waist slab with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of stainless steel members shall be 50.00 Rmt. 618.37

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

29 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down

or hinged grating including the cost of cutting and making good the walls. 48.00 No. 585.36

30 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 5.00 No. 1292.19

Item Rate In

Description of Item Quantity Unit Amount

No figures

31 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm 5.00 No. 2932.92

deep for single pipe line.

32 Providing and fixing screw down bib taps of following size. (A) Brass screw down

bib tap polished bright. (i) 15mm dia. 144.00 No. 186.83

33 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm

34 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm

35 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral

P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement

: 1-fine sand) (Seal and cover to be measured and paid for separately) (A) vitreous

China Pattern :(i) in white colour

36 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled

flush bend including cutting holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be measured and paid for

separately) (A) Vitreous China (I) In white colour

37 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

38 Providing and fixing plastic seat and cover for wash down water closer with C.P.

brass hinges and rubber buffers. (B) Black plastic seal and cover. 16.00 No. 291.33

39 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same but

excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

40 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

41 Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete. (ii) 25mm dia. 16.00 No. 263.77

42 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet. (A) 100mm

43 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on

Item Rate In

Description of Item Quantity Unit Amount

No figures

44 Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes

suitable for potable water with ringfit joint including cost of rings, as per IS

specification no. 4985/1988 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing meterial etc. complete. 1.One

coupler / ring shall be provided with each full length pipe cost of which is included

in rates below. (C) Test Pressure 6 Kg/cm2 (90mm Dia Pipe)

45 Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes

suitable for potable water with ringfit joint including cost of rings, as per IS

specification no. 4985/1988 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing meterial etc. complete. 1.One

coupler / ring shall be provided with each full length pipe cost of which is included

in rates below. (C) Test Pressure 6 Kg/cm2 (110mm Dia Pipe)

46 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

47 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

48 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

49 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

50 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

51 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials.

52 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

53 Providing and fixing tiles roofing with manglore tiles including teak reepers of sizes

54 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including covering the

top with stone including providing vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

55 Providing & Fixing Bunk Bed , as per refer architect detail Drawing made with

Wooden finishes, with laminated/veneer coated shade approved by architect,also

include with Spring Bed mattress 5"thk. 5year warranty with ,Bedsheet,Blanket and

necessary items required to complete the job as per design /drawing and

consultant's instructions.Bed Size( 6'L x 3'W x 7'H)

56 Providing & Fixing Wardrobe Storage unit 900 mm X 450-750 mm table-top along

with height as per architectural detail made of 19mm thick plywood, with Laminate

shutters/Glass Sliding Sutter, sides and bottom, with middle shelf in 19mm thick

plywood with 1mm thick laminate on top face, complete with 5mm teakwood

lipping on all exposed edges of plywood and all necessary accessories including

polishing/painting as specified in the detail drawing and to The rate also includes

for all necessary items required to complete the job as per design /drawing and 64.00 No 6000.00

client/consultant's instructions.

Item Rate In

Description of Item Quantity Unit Amount

No figures

57 Providing and installing Side Table in the Bsf Baracks room are having 600mm X

mm along with height as per architectural detail table-top out of post-formed

laminate top of approved design with smooth edges and having necessary structural

frame made out of pre-laminated ply fins of the same design as the top and SS tubes

16G, brushfinished. HOF/BP-ergo/Haworth or equivalent. Complete and diretced by

consultant instruction.The rate also includes for all necessary items required to

complete the job as per design /drawing and consultant's instructions.

58 Providing and fixing 75 mm thk Wooden Partition in slab, level and plumb made out

of 50 mm X 35 mm thk salwood framework @ 600 mm c/c with 18 mm thk

commercial ply fixed on both the sides of the frame work etc. all complete as per

architects instructions. , 75mm x 25mm cover moulding in TW as Trim on top and

side The rate also includes for all necessary items required to complete the job as

per design /drawing and client/consultant's instructions.

59 Providing & fixing sofa made from 60 x 40 mm teak wood framework at every 600-

700 mm along the length of the sofa, rubber-foam padding,as well as the fabric of

sofa along all sides as per detail drawing and approved by Architect, approved

upholstery & SS legs , as per design etc complete .The rate shall apply for all heights

& all levels.As per design by Architect.,The rate includes the cost of all necessary 20.00 Rmt 11500.00

60 Providing & supplying Centre/Corner tepoy with teak wood frame and laminated

plywood top of 18mm plywood, as per design. Wooden edges/surfaces to be

finished in stained melamine polish. Minimum size of table - 600 x 600 x 450 mm

with necessary hardware as per design, complete.

61 Providing and fixing Geyser 25 Ltr Capacity The rate also includes for all necessary

items required to complete as per design/drawing/location and client/consultant's

instructions jaquar or equivalent make 8.00 No 6000.00

62 Point Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector

as directed.

(a) with medium class Rigid PVC pipe and accessories

Item Rate In

Description of Item Quantity Unit Amount

No figures

63 Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling,

complete with earth continuity and necessary connection with primary light with

accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet)

/ Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. 58.00 no 132.31

(a) with medium class Rigid PVC pipe and accessories

64 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling ,complete with 6A Modular type switches and following type

of accessories erected on PVC / Metallic box, single mounting base frame covered

with textured / metallic front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as

(a) with medium class Rigid PVC pipe and accessories

65 Do as above but for Secondary light point controlled by same two way switch

66 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A

Modular type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth continuity of

following type erected on PVC / Metallic box, single mounting base frame covered

with textured/metallic front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. 42.00 no 638.32

(a) with medium class Rigid PVC pipe and accessories

67 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on

PVC / Metallic box, single mounting base frame covered with textured / metallic

front plate modules erected on / in wall / ceiling with following type accessories 30.00 no 257.55

68 Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at

convenient location. ( Plug & Switch can be together or at different location )

Item Rate In

Description of Item Quantity Unit Amount

No figures

69 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following

type of to be erected concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

70 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following

type of to be erected concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

71 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

72 Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

73 Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

74 MAINS : ( not for Point wiring )

Supplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA

approval for 650 V/ 1100 V with earth wires of Cu. PVC insulated flexible wires with

ISI approval for 650 V/ 1100 V as earth wires with Suitable dia rigid PVC Pipe of

Heavy Gauge ( Scope Also includes Supply of pipe. )

Supplying and Laying of 4 nos. of 16 sq mm Cu. FRLS flexible wires with 2 nos

sqmm Cu. FRLS flexible wires with 40 mm dia Pipe

75 Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos

sqmm Cu. FRLS flexible wires with 40 mm dia Pipe 100.00 mtr 147.46

76 Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos

sqmm Cu. FRLS flexible wires with 25 mm dia Pipe 250.00 mtr 112.11

77 Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos

sqmm Cu. FRLS flexible wires with 25 mm dia Pipe 1300.00 mtr 82.82

78 Supplying and Laying of 2 nos. of 1.5 sq mm Cu. FRLS flexible wires with 1 nos

sqmm Cu. FRLS flexible wires with 25 mm dia Pipe 180.00 mtr 62.62

Item Rate In

Description of Item Quantity Unit Amount

No figures

79 Distribution Board

Supply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified

Distribution Board-VTPN

Supply, Erecting, testing and commissioning of only VTPN D.B. with space for 1.00 no 11546.32

FPMCCB / FPMCB as incoming and 8 TPMCB / SPMCB as outgoing per phase (i.e.

way VTPN D.B.) of Legrand Make Cat. No.

80 Distribution Board-SPN

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for

DPELMCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of 1.00 no 5316.64

Hensel Make KV9112M

81 Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for

DPELMCB as incoming and 4 SPMCB as outgoing per phase (i.e. 8 way D.B.) of Hensel

Make KV7109M

All MCB's, ELMCB's, ELCB's should be of 10 KA only 50.00 no 270.68

6 to 32 A SP MCB

83 6 to 32 A DP MCB 10.00 no 299.97

84 25 to 32A / 100 mA DP ELMCB 20.00 no 1969.50

85 40 A / 100 mA DP ELMCB 1.00 no 2235.13

86 63 A / 100 mA DP ELMCB 1.00 no 2654.28

87 6 to 32 A TP MCB 6.00 no 1285.73

88 25 to 32A FP MCB 1.00 no 595.90

89 40 A FP MCB 1.00 no 668.62

90 63 A FP MCB 1.00 no 737.30

91 Approved make Three pole moulded case circuit breaker having breaking capacity

/strength ICU of 35KA at 415 V. having normal current rating up to 100/125Amp.

With fixed thermal & megnatic release suitable to work on A.C. supply 50 c/s. with

all internal connections & complete erected in existing 16 G.M.S. housing

92 SITC of IP65 Polycarbonate enclosure for DP MCB 15.00 no 1368.55

93 SITC of IP65 Polycarbonate enclosure for FP MCB 1.00 no 1464.50

94 Cable Trench

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

locating the fault all over the run and backfilling the same and making the surface as 50.00 mt 55.55

normal ground.

95 Covering of cable with second class bricks or cement tiles laid cover the cable

crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above &

below cable (16 bricks per meter)

96 Construction of brick masonry pulling chamber 600 mm x 600 mm inside clear size

and depth up to 0.60 meter with 350 mm thick masonry in cement mortar

proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness

from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm

thickness in M20 grade with reinforcement. The rate shall be inclusive of providing

and fixing frame and 600 mm dia cover of FRC for the Heavy Duty. Rate also

inclusive of excavation and back filling & clearing the site by removing debris &

Shifting of the debris & making site good As per the Instruction of the Engineer In

charge complete in all respect.

Item Rate In

Description of Item Quantity Unit Amount

No figures

Supply, Installation, Testing, Laying, Commissioning of following 1100 volt grade

XLPE insulated PVC sheathed aluminum / Copper conductor armored cables as per

(IS:7098)(I)-88 ISI marked & specification in trenches, cable trays, ducts, over bed of

sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting

testing and commissioning with identification tags at every 10 mtr. & Both ends.

with All the fixing accessories, excavation Back filling & Cable protection with Bricks 30.00 mt 378.75

as per the drawing ( If required ).

70 sq.mm x 3.5 c Al. XLPE Arm. Cable

98 35 sq.mm x 3.5 c Al. XLPE Arm. Cable 30.00 mt 220.18

99 10 sq.mm x 4 c Al. XLPE Arm. Cable 50.00 mt 140.39

100 6 sq.mm x 3 c Al. XLPE Arm. Cable 500.00 mt 107.06

101 4 sq.mm x 3 c Al. XLPE Arm. Cable 100.00 mt 87.87

102 Cable Termination

SITC of Cable end termination of the following XLPE insulated PVC sheathed

aluminum/copper conductor armored cables of 1100 volt grade including supplying

and fixing of bimetallic Long neck crimping lugs, double compression type Brass

glands with earthing.

70 sq.mm x 3.5 c Al. cable

103 35 sq.mm x 3.5 c Al. cable 2.00 no 200.99

104 10 sq.mm x 4 c Al. cable 2.00 no 57.57

105 6 sq.mm x 3 c Al. XLPE Arm. Cable 32.00 no 53.53

106 4 sq.mm x 3 c Al. XLPE Arm. Cable 8.00 no 53.53

106 A MV Switchgear & Power Panels

Supply, Unloading at site, shifting to site, assembling, leveling, grouting, erecting,

Testing, & Commissioning main L.T. panel board, fabricated from M.S. sheet & folded

channel totally enclosed cubical type compartmentalized. Scope Covers Unloading at

Site, Store in Weather Proof Condition, Shift to the Location Basement / GF / FF,

Grouting, Installation, Testing & Commissioning complete in all respect & As per the

instruction of Architect / Consultant / Engineer Incharge. Scope also covers Co

ordination with Panel Manufacturer.

Design, fabrication, assembling, supply, installation , testing of Panels for 415 V,

phase, 50 Hz, 4 wire power supply system.

Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation,

compartmentalized in Form 4b Construction, floor mounted, free standing and shall

be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at

the top and the bottom of the panel.

All large panels shall be provided with lifting hooks. Distribution panels shall be

fabricated in accordance with the specifications.

Note : Panel vendor has to provide Surge Protection at every stage of the

Distribution.

1) Supporting rigid steel framework.

2) Cubicle type, 14 gauge CRCA sheet steel enclosed.

3) Complete with interconnections and distribution bus bars.

4) Proper bonding to earth.

5) Painting/lettering on Breakers and distribution boards, the location they serve,

providing on each panel its circuit diagram.

Item Rate In

Description of Item Quantity Unit Amount

No figures

6) Providing cable clamps / supports within distribution boards cable alley.

7) TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of

neutral link.

8) All MCB’s shall be of minimum 10 KA breaking capacity.

9) The breaking capacity of MCCB’s are mentioned panel wise.

10) All motor feeders MCCBs shall be of motor duty.

11) Distribution panels shall be Powder Coated with Siemens gray paint shade no.

RAL-7032 of IS-5.

12) Degree of protection for following type of distribution panel enclosure shall be

as per IS:13947-1993.

a) IP 52 for indoor panels.

b) IP 54 for kitchen and laundry panels.

c) IP 55 for outdoor panels.

13) All MCCB’s shall be provided with operating mechanism for door interlock &

with the roraty handle.

14) Current density of aluminium shall be 1 sq mm for 0.8 amps for rated current of

bus bars and current density of copper shall be 1 sq.mm for 1 amps for rated current

of bus bars.

15) Tinned copper earth bus as specified in the BOQ / SLD shall be provided through

out the length of each board.

16) All measuring instruments (Meters) shall be of digital electronic with LED of

approved make and compatible with BAS.

17) All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

18) All panels shall have provision of the following:

a) IP 55 for outdoor panels.

b) Pad locking of MCCB’s handles in “OFF” Position.

19) Additional set of C.T.s, potential free contacts, connectors, contactors with

wiring etc are to be provided for BAS including space required for various

transducers in Main Switch Board sections. Only transducers shall be supplied by

BAS contractor.

20) All the C.T.s should be auto short link type.

21) All the MCCB's should be with rotary handle.

22) All MCB’s used for protection of resistive and lightly inductive load shall be type

“B” characteristic and inductive (motor) load shall be of type “C” characteristic and

discharge lamps and UPS etc. shall be of type D characteristic.

23) All incoming and outgoing air circuit breakers shall be placed on middle portion

of the vertical in single tier formation.

24) All PTs / control transformer shall be provided with centre tap earth secondary.

25) If Any descripancy found in SLD & BOQ, it should be brought in the notice of the

Client / Consultant, Client / Consultant's decision will be final in case of any

descripancy.

26) G.A. Drawing should be checked & Finalised by consultant before fabrication.

Item Rate In

Description of Item Quantity Unit Amount

No figures

107 Main LT Panel

Incoming :

100 amps FP MCCB (16 KA) with following accessories: 1 Set

Breaker ON / OFF / TRIP indicating lights with control MCB’s.

Under voltage release

24 V DC Shunt trip coil

3 Nos. of 0-100/ 5 amps CTR digital VAF with 3 nos 100 / 5 amps, 15 VA Class

protected by 2 amp TP MCB’s

100 amps FP Tinned copper bus bars with coloured heat shrinkable insulated sleeve.

All the outgoing should be provided with RYB - On - Off - Trip I/L . ( For MCCB only )

40-63 amps 4 pole MCB ( 10 KA ) : 2 Nos.

6-32 amps 2 pole MCB ( 10 KA ) : 20 Nos.

Panel should be as per SLD

108 Light Fixture

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or Polycarbonate optics with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)

(A) Tube Light with integral/ non-integral driver

(a) 5 Watts, Surge-2 KV, IP-20,2 feet (Cat-III)

109 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or Polycarbonate optics with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED 50.00 no 823.15

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)

(A) Tube Light with integral/ non-integral driver

(d) 20-22 Watts, Surge - 4KV,IP-20, 4feet

Item Rate In

Description of Item Quantity Unit Amount

No figures

110 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or Polycarbonate optics with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) 28.00 no 480.76

(c) Square / Circular Surface / recessd Mounted Downlight with Provision for Spring

loaded mounting clips complete

(a) 5-6 Watts, Surge - 2KV

111 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy & 30 cms. down rod erected

with 24/ 0.2, 3 core flexible wire with earthing.(Make shall be approved by Engineer

in charge)

112 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire

with earthing.

113 Exhaust Fans :

Supplying & erecting approved make low noise decorative exhaust fan having size

200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square 8.00 no 1703.87

114 Providing suitable M.S. louver shutter of the Exhaust fan.

115 Earthing

Supplying & erecting funnel type earthing having earth plate of following size burred

in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt

with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG

bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As per drawing) with following

specification

60 x 60x 0.315 cms. Copper earth Plate

Item Rate In

Description of Item Quantity Unit Amount

No figures

116 Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications.

For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e. Soft Rock, Marshy

Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

117 Earth wire/strips :

Supply and laying cu. earthing strips for interconnecting the earthing stations,

panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as

specified and shown on drawings complete with : fixing accessories

Corrosion protection of buried conductors with bituminous coating and covered

with PVC tapes.

Providing and erecting HOT deep Galvanized strip iron wire 8 to 16 S.W.G.

118 32x 6 mm cu. Tape 15.00 kg 794.87

119 25 x 3 mm cu. Tape 15.00 kg 794.87

120 No.8 gauge bare cu. earth wire 15.00 kg 794.87

121 Earth Link : 40mm x 6 mm earth link fixed by necessary screws on wall.

122 SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN With necessary

clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be

with the Water tight Glands only ) 3.00 no 2135.14

123 Miscellaneous

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete.

4.5 Kg Capacity

124 Supplying & Erecting automatic emergency light with maintenance free battery for

20 watts tube.

125 Supplying rubber matting of 6 mm thickness as per IS 5424 and of required length

and breadth with good insulation property for 22 KV 1.00 sq. mtr 3081.51

126 Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE

installation to be erected as per IS. 2.00 no 69.69

127 Providing printed instruction chart both in English and Gujarati and duly framed

with front glasses, for treatment of person suffering from Electric shock 2.00 no 130.29

128 Providing & laying. Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II ) Anti Rodent type with necessary

connecting accessories of same material at required depth for laying of cable.

below ground / road surface for enclosing cable and backfilling the same to make 100.00 mt 62.62

ground as per original.

(A)50 mm dia

129 (B)90 mm dia

Item Rate In

Description of Item Quantity Unit Amount

No figures

Supplying & erecting approved make self-priming domestic monoblock water pump

with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply with metallic

flange, and M.S. impeller delivery and following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery

131 Supplying & erecting approved make Automatic liquid level controller 6A.as per

instruction of Engineer in charge on site complete with wiring connection with

existing wires , with copper conductor from pump to upper and lower tank. 2.00 Ea 2355.32

132 Supplying & erecting approved make motor control cubical panel (Direct - on -

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and outside

with hinged doors and locking, arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R-

Y - B phases, overload relay, Automatic water level controller, Ammeter, Voltmeter

contactor & overload relay, start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator, overload relay & contactors will be

of L & T, Siemens or BCH make only.

(a) DOL up to 5.0 H.P.

133 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.

(b) 3 Core x 2.5 Sq. mm.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

1 payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

4 of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Tapi ( R & B ) Division