REPAIR TO DRAIN, SEWAGE LINE, HARDSTANDING, INTERLOCKING TILES AND OTHER B/R WORKS AT AF STATION KHAMBHALIYA AND DWARKA UNDER GE (AF) JAMNAGAR NO.2

Amount

Cleaning of sewage lines 100 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of sewage lines 150 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of sewage lines exc 150 but n exc 300 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging manholes/chamber depth not exc 1.0 m, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging manholes depth exc 1.0 m but not exc 2.0 m, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of gully traps by removing all sludge / waste etc including cleaning of connected pipe up to 1st Man Hole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of floor traps by removing all sludge / waste etc including cleaning of connected pipe up to gully trap to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Removal of blockage from Indian WC / EWC by removing all sludge / waste etc including cleaning of connected pipe up to first manhole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning & desludging septic tank of cap upto 25 users by pumping out sewage & sludge and disposing all waste including liquid in covered tanks outside M.O.D land, burried in ground and finally cleaning & washing with fresh water complete all as specified and directed.

Excavation in trenches or cleaning of drain n.exc 1.50 meter wide & n.exc 1.50 meter depth for foundations etc shafts, well cesspits, manholes, pier holes etc n.exc 10.00 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Demolition and breaking up 150 mm dia bore RCC / salt glazed stone ware drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC of bed and removal of debris to outside MOD land complete all specified and directed.

Demolition and breaking up 200 mm dia bore RCC / salt glazed stone ware drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC of bed and removal of debris to outside MOD land complete all specified and directed.

M&L for 150 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M&L for 200 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M & L for PCC 1:4:8 type D-1 using 20 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 150 mm bore, after they are laid and tested complete all as specified and directed.

M & L for PCC 1:4:8 type D-1 using 20 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 200 mm bore, after they are laid and tested complete all as specified and directed.

Cutting into existing manholes in running sewage line for connecting new drains of 150 / 200 mm internal dia of pipe, making good to walling and rendering, cutting out branch channel, and as required complete all as specified and directed.

Demolition of reinforced cement concrete (including cutting of reinforcement as required to facilitate demolition) in any position and of any description complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for manholes/soakage well and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M & L mild steel TMT bars 10mm dia and over cut into length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with clips.quality conforming to Fe-410-W (Gde,E-250) complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm dia single socketed, in any length, jointed with solvent cement, fixed on walls or floors with clamp incl dismantling of rain water pipes complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length, jointed with solvent cement , fixed on walls or floors with clamp incl dismantling of rain water pipes complete all as specified and as directed.

S&F in repair PVC (SWR) bends of 75 mm bore of any radius complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110mm bore of any redius complete all as specified and directed.

S&F in repair PVC (SWR) cowl of 75 mm bore of any radius complete all as specified and directed.

S&F in repair PVC (SWR) cowl of 110mm bore of any redius complete all as specified and directed.

S & F in repair PVC (SWR) branch piece Single (single Y) equal or unequal 75 mm bore fixed complete all as specified and directed.

S & F in repair PVC (SWR) branch piece Single (single Y) equal or unequal 110mm bore fixed complete all as specified and directed.

S & F in repair PVC (SWR) branch piece, double (double Y) equal or unequal 75 mm bore fixed complete all as specified and directed.

S & F in repair PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore fixed complete all as specified and directed.

S&F in repair PVC (SWR) floor trap/Nahani trap, plain with grating including jointing with solvent cement, outlet dia 75 mm, including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, plain with grating including jointing with solvent cement, including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Demolition of brick / stone masonry / Block masonry work built in cement n.exc 50m, complete all as specified and directed.

M&L for providing precast cement concrete Type C-1(1:3:6) (using 20mm graded stone aggregate) solid building blocks exc 10 cm in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and directed.

Demolition Concrete of any description and in any position complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortat (1:3) finished even and fair complete all as specified and directed.

M & L for Broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Hardstading / path / flooring laid in panels finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

Material & Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L for sand filling (25mm thick sand screed bed) under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and directed. Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

S&F in repairs 20 mm size Ball valve high pressure of PTMT with Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm-210 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25 mm size Ball valve high pressure of PTMTwith Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 25 mm-455 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

Dismantling water tanks of any description, 250-500 litre capacity and removing from site.

Dismantling water tanks of any description, 500-1000 litre capacity and removing from site.

S&F Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity, all as specified in SSR Part-I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity, all as specified in SSR Part-I complete all as specified and directed.

S&F in repair water storage tank covers of any size at any height complete all as specified and directed.

Cleaning and removing all scale and dirt etc cepacity exc 250 & n exc 500 ltrs from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc cepacity exc 500 & n exc 1000 ltrs from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair Pillar taps cast copper alloy, chromium plated, screwed down high pressure with with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm size angular / stop cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 20 mm bore pipe complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 25 mm bore pipe complete all as specified and directed.

M & L for rendering 15mm thick on fair face of concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

Dismantling of plain/translucent or corrugated sheet sheeting, any gauge, thickness, including nanitial or similar pattern roof covering complete all as specified and directed.

Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, velley gutter fixed with self tapping screws complete all as specified and directed.

Dismantling of concertina coil of any type / size complete all as specified and directed. Note:- Each line wire to be measured.

Dismantling of barbed wire, any type complete all as specified and directed.

Dismantling MS work of any description

Dismantling fencing wire mesh any type

Demolition of cement concrete (unreinforced) of any description and any in any position not otherwise specifically provided for complete all as specified and directed.

M & L for used formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces complete all as specified and directed.

M&L for cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts (including caps and bases) foundations, filling D2, (1:4:8 ) (using 40mm graded stone aggregate) mass concrete complete all as specified and directed.

Steel work in tubular trussesincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.

S&F for mild steel work as trusses (frmed) , trussesed, purlin, rails and other fastening and heavy brackets framing (beam, Tee, angle, channel or fast section) including distance pieces etc Fe-410-w complete all as specified and directed.

S&F of mild steel framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes,angle iron, horns, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and including notching /drilling holes, similar work confirming to Fe-290, Gde E-165. The mild steel framed should be pre galvanised before fixing at site complete all as specified and directed.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square eads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5 cm long diameter of neck 5 to 10 mm complete all as specified and directed.

Supply only chain link MS galvanised fencing,of Aperture 50x50cm, conforming to IS 2721:2003 including line wires of 4 mm dia straining bolts, etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including lines wires, any mesh size and type to any type of standards, rails, straining bolts, etc including provision of inding wire complete all as specified and directed.

M&L for preparation of new iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortat (1:3) using water proofing compound @ 3% by weight of cement finished even and fair as in sunken floor and wall complete all as specified and directed. Note: WPC will be measured and paid separetely.

M&L for applying two coats of water proofing coating by using Super Latex chemical mixed in water and cement ratio as per manufacturer's instructions both on floor as well as on walls of sunken complete all as specified and directed. Make : Pidilite / Sika / Fosroc / Choksey

Supply only water proofing compound complete all as specified and directed.

M &L for cement concrete type E-2 1:5:10 (using 40 MM graded crushed stone aggregate) as in mass filling in sunken floor of toilets and similar work complete all as specified and directed.

Cutting / drilling hole in brick wall / RCC beam or slab exc 300mm deep of WC/bath by mechanical mean and fixing with and including 40mm GI pipe as spouts pipe of require length at site, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 12.5mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350x250x7mm/ 450x350x7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire barbed with 2.24 mm dia bars at 75 mm specing and straining & fitting to any type of standard rails straning bolts, including securing or tving at crossing with the provision of galvanized MS wire staples or steel pins etc complete all as specified and directed. Note : Each line of steel barbed wire to be measured).

S&F Galvanised 2 strand steel barbed wire barbed with 2.24 mm dia bars at 75 mm specing and straining & fitting to any type of standard rails straning bolts, including securing or tving at crossing with the provision of galvanized MS wire staples or steel pins etc complete all as specified and directed. Note : Each line of steel barbed wire to be measured).

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over cut into length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with clips quality conforming to Fe-410-W (Gde, E-250) complete all as specified and directed.

All as per item No 92.0 above but 5 mm dia and over upto 10mm dia in stirrups,spacers and binders confirming to IS-432 round plain bars complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (using 20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 but n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops and fixed complete all as specified and directed.

M&L for preparation of old iron surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old iron surfaces over 10 cm width or girth and applying one coats of Aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed.

M & L for preparing old surfaces (plastered or unplastered) of wall and applying one coat of acrylic emulsion paint (exterior grade 100% acrylic) on external walls, soffits of chajjas, roof slabs and beams surfaces complete all as specified and directed.

Dismantling of granite, marble or kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills, wall, pillars or plateform etc complete all as specified and directed.

M&L for Granite work not less than 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with need cement slurry, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

Taking down CI / rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc complete all as specified and directed.

S&F 75 mm dia cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F 75 mm dia spun cast CI bend/tees of any radius, jointed with neat cement paste complete all as specified and directed.

S&F 100 mm dia cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F CI bends / tees 100mm dia long (any radius) diminishing pieces of tapers large bore measured fited with oval access door complete all as specified and directed.

S&F in repair 75mm cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

S&F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed.

M&L for extra over cast iron pipe & fitting if lead joint is provided in lieu of cement joint for CI pipes & fitting of dia 100mm complete all as specified and directed.

M&L for extra over cast iron pipe & fitting if lead joint is provided in lieu of cement joint for CI pipes & fitting of dia 75mm complete all as specified and directed.

Sukhi Electricals

suvidhiconstruction

S H CONSTRUCTION

SURAJ ENTERPRISE

jagdish machinery stores

natwarsinghdipsingh

High Tech Consruction

ABR Trading Co