Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹17.4 LAdmitted-Finance | -13.00% | ₹17.4 L | L1 | Admitted-Finance |
| 2 | L2₹20.0 LAdmitted-Finance | -0.11% | ₹20.0 L | L2 | Admitted-Finance |
| 3 | L3₹22.0 LAdmitted-Finance | +10.00% | ₹22.0 L | L3 | Admitted-Finance |
Updated dates
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
22 Apr 2026, 2:00 pmClosed
General Manager (Works)
Office of Addl. CEO. SASB
Construction of prefab halls/rooms on 1st storey of five rooms at Panjtarni (05 Nos.)
2026_SASB_307784_3
SASB/eNIT/2026/09
Open Tender
Civil Works
45 days
Baltal Axis
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
J and K Bank 0110040100014077
₹40,000
24 Apr 2026
13 Apr 2026
23 Apr 2026
13 Apr 2026
22 Apr 2026
13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | |||||
| 2Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of nuts & bolts. Welded (Make-JINDAL/TATA/SAIL/JSW) | |||||
| 3Providing and Fixing of Nuts & Bolts of different sizes | |||||
| 4Providing and fixing PUF insulated sandwich panels for walls and roofing of total thickness not less than 50 mm. Panel shall have 0.5 mm thick precoated GI sheet on both side of Polyurethane foam confirming to IS 12436: 1988. The PPGI sheet should have plastic protective guard film of minimum 25 microns to avoid scratches while transportation . The PU foam shall be self-extinguishing, fire retardant. Also all joints of roofing would be fill with silicon. The panel should be fixed in 1.2 mm thick U-section of size 40x52x40mm over all sides with proper riveting having spacing of 500 mm and 100 mm x 2 mm thick MS sheet on every joint of PUF panels of walling & roofing from inner and outer side | |||||
| 5Providing and fixing precoated galvanised steel sheet roofing accessories 1 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (i) Ridges plain (500 - 600mm) | |||||
| 6Supply and fixing of door composited with 50mm PUF panel (polyurethane foam conforming to IS 12436:1988 and PPGI sheet conforming. Sheet shall have guard film of 25 micron to avoid scratches during transportation).Doors with frame work of Aluminum anodized channel (profile) of 60mmx40mmx2mm thick including cost of 02 Nos. Anodised Aluminium handles 125 mm, 02 Nos. Anodised Aluminium sliding door bolt 250 x16 mm , 02 Nos. Anodised Aluminium tower bolt (barrel type) 200 x10 mm, 04 Nos. Anodised Aluminium butt hinges 75x45x3.2 mm etc complete | |||||
| 6.01 | (Doors of size 1.00mx2.10m) including cost of frame etc complete | - | Nos | - | - |
| 6.02 | (ii) (Doors of size 0.75mx2.10m) including cost of frame etc complete | - | Nos | - | - |
| 7Supply and fixing of Double leaf Window of size 1.00mx1.00m composited with milld steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 04 Nos. 100x58x1.90 mm mild steel butt hinges, 02 Nos. 125 mm mild steel handles , 04 Nos. 150x10 mm mild steel tower bolts etc complete . | |||||
| 8Supply and fixing of Ventilator of size 0.45mx0.60m composited with mild steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 02 Nos. 100x58x1.90 mm mild steel butt hinges, 125 mm mild steel handles , 02 Nos. 150x10 mm mild steel tower bolts etc complete . | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_998221.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
