Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC 363 39KA HASSANGANJ BAWLI KUMAR COMPANY 363 39 KA HASAN GANJ BAWLI SAADAT GANJ LUCKNOW SAADATGANJ | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹37.9 L+₹87,496 (2.36%)Rejected-Finance 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L2 | Rejected-Finance Being not L1. | |
| 3 | Rejected-Technical 0 AS ENTERPRISES DAYALACHACK HIRANAGAR KATHUA JAMMU KASHMIR 184144 | KATHUA | JAMMU AND KASHMIR | 184144 | - | Rejected-Technical Not enlisted in appropriate category i.e. b (i) |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MC CHANDIGARH
GE (AF) MC CHANDIGARH
PROVN OF CERTAIN SANCTIONED WORKS AT 3BRD AF STATION CHANDIGARH UNDER GE (AF) MC CHANDIGARH
2022_MES_560733_1
GE (AF) MC /CHD-50/2022-2023
Open Tender
Civil Works
Item Rate
270 days
CHANDIGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) MC Chandigarh
₹98,000
Yes
4 Mar 2023
1 Nov 2022
7 Dec 2022
1 Nov 2022
5 Dec 2022
21 Nov 2022
Amount
Material and labour for Chemical earthing complete with copper earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 3.5 m deep below ground level) with top edge of plate not less than 2.5 m below normal ground level, earth pit filled with Magnesium Sulphate (MgSO4) 15 cm all around the plate including connection with and including copper strip 32 x 6 as earth lead fixed by means of copper nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc including dismantling old earthing, complete all as directed and specified. Note : The earth value/result must be less than 1.0 ohms.
Supply and fix copper strip size 20 x 3 mm as earth continuity conductor or main earthing lead fixed to wall on insulator or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and directed.
S&F Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 03 Nos 8 mm dia 25 mm long hexagonal head screw complete all as directed.
Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp, 'C' curve complete all as specified and directed.
Material and labour for Sub Main Wiring with two run single core 6Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface, complete all as specified and directed. Note:- Two run of 6Sqmm + One run of 4Sqmm for earth wire shall be measured as one RM.
Supply and fixing 80mm bore GI tube light grade steel water tubing with and including all GI fittings laid on wall/floor complete all as specified and directed.
S&F MCB DB SPN 240V 8 way steel sheet phospetised powder painted with 200Amps rated bus bar IP 43 protection 415V neutral link, earth bar and din rail double door vertical type complete all as specified & directed .
Supply and fix MCBs SP 6-32Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.
Supply and fix MCB SPN 40Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.
Supply and fixing water cooler electric driven (single Phase) having approx storage capacity of 80 liters and nominal cooling capacity of 40 liters per hours complete all as specified and directed.
Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 'C' curve complete all as specified and directed.
Material and labour for Sub Main Wiring with two run single core 4Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 2.5Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface, complete all as specified and directed. Note:- Two run of 4Sqmm + One run of 2.5Sqmm for earth wire shall be measured as one RM.
Material and labour for Sub Main Wiring with two run single core 2.5Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 2.5Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface, complete all as specified and directed. Note:- Two run of 2.5Sqmm + One run of 2.5Sqmm for earth wire shall be measured as one RM.
Material and labour for Sub Main Wiring with two run single core 6Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 6Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface, complete all as specified and directed. Note:- Two run of 6Sqmm + One run of 6Sqmm for earth wire shall be measured as one RM.
S&F modular switch, 1 module single pole one way 16 Amp complete all as specified and directed .
S&F modular Socket outlet 3 pin 6/16Amp multipurpose, modular type, 2 module 240 volt complete all as specified and directed.
S&F wall mounted air circulator metal body 750mm (30") size 1400 RPM heavy duty AC single Phase 230/240 Volts fixed on wall including making necessary connection complete all as specified and directed.
Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI wire 4 mm dia as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 15 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc including dismantling old earthing, complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.
Material and labour for Sub Main Wiring with two run single core 4Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface, complete all as specified and directed. Note:- Two run of 4Sqmm + One run of 4Sqmm for earth wire shall be measured as one RM.
S&F water heater storage type, 5 star rating (Geyser) of capacity 25 litres rated power 2KW including grouting the nuts, bolts, washers and all other accessories as required at site for the effective functioning of the water heater complete all as directed.
S&F flexible PVC connection, nylon thread reinforced 15mm dia, 450mm long brass nut at both ends for 15mm dia pipe for hot & cold water, complete all specified as directed.
M&L for cutting of existing GI pipe of size 20/25mm dia and insert the tee of suitable size for making branch connection for 15mm dia GI pipe complete all as specified and directed.
S&F steel water tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all specified as directed.
S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all specified as directed.
S&F bib tap 15mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all specified as directed.
Supply and fixing moisture separators made of polycarbonate, maximum working pressure 10 bar, temperature 5 to 50 degree centigrade and having port size 1/4 in existing air pipe line with and including all necessary fittings complete all specified as directed.
Excavation over areas, not exc 1.5 mtr in depth etc and getting out soft /loose soil complete all specified as directed.
Excavation over areas, exc 1.5 mtr in depth and n.exc 3.00 m in depth etc and getting out soft/ loose soil complete all specified as directed.
Excavation in post holes (or similar holes) each not exc 0.5 cum,in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm complete all specified as directed.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all specified as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all specified as directed.
Removing excavated material outside the defence land and depositing where directed at a level n.exc 1.5m above the staring point to a distance exc 2.5Km but n.exc 3.0Km complete all specified as directed.
M & L for broken stone or boulders hardcore of gauge n exc 63mm, deposited, spread, levelled in layers n exc 15 Cm thick, watered and rolled/rammed to a true srurface complete all specified as directed.
M&L for 50 mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished even and smooth with out using extra cement etc. complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using(40mm graded stone aggregate) as in plinth protection all as specified and directed
M&L for 100mm thick cement concrete type D 2 , 1:4:8 (using 40mm graded stone aggregate) as in floor/ sub base and finished even and smooth with out using extra cement etc. complete all as specified and directed.
M&L for cement concrete type D 2 , 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all specified as directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all specified and directed.
Taking down cement plaster on brick or concrete or stone wall surfaces etc any description including ranking out joints, hacking for key, scrubbing down with water etc and removal of rubbish out side the MoD land to a distance exc 2.5Km but n.exc 3.0Km complete all as specified and directed
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all specified as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all specified as directed.
M&L for preparation to new plastered surfaces of wall and applying two coats of oil bond distemper over one coat of primer on walls complete all specified as directed.
M&L for preparation to new plastered surfaces of wall and applying two coats of cement base paint complete all specified as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including gusset plates complete all specified as directed.
M&L for preparation to new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified as directed.
S & F for welded steel wire fabric weight n.exc 4kg /sqm fixed in concrete/ steel surface complete all as specified and directed. Note:- Unit weight for per Sqm shall be measured through BOO.
S&F framed work such as grills, framed guards bars and similar work conforming to Fe 290 Gde E-165 complete all specified as directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings, running rails and guides) and hanging also fastening nand fixing confirming to Fe-410-W (Gde-250) quality-B complete all as specified and directed
M& L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:6 complete complete all as specified and directed
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and including fixed with self tapping screws complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed
S&F anodised aluminium sliding door bolts 200mm, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple platecomplete all as specified and directed
S&F exturded Aluminium alloy handle fabricated 125mm long fancy type etc fixed with screws and all necessary arrangment, complete all as specified and directed
S&F 200mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified and directed
S&F 100mm size butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed
S & F for 1.25mm thick mild steel( perforated type) plain black sheet in wall cladding, steel gate and similar work, cut to size holes punched including rounded headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending and turning up, mitred angles etc as required complete all as specified and directed
S & F 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
S & F 160mm bore PVC (SWR) bends of any radius, complete all as specified.
Taking down existing bitumen felt including cement mortar bedding including padding and cleaning the surface and removal outside the MoD land, complete all as specified and directed
M & L for providing 50 mm thick cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone agg ) as in roof padding required to maintain desired slope complete all as specified and directed.
M & L for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 with water proofing compound @200 ml/bag finishing even and fair without using extra cement as in under layer of roof treatment at any height complete all as specified and directed. (Note : Water proofing compound shall be paid seperately.)
Supply only Liquid water proofing compound complete all as specified and directed.
M&L for Applying a coat of bitumen primer @ 0.3Kg /sqm conforming to IS : 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100 mm side lap and 150 mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2 kg per sqm and blinded with clean dry sand @ 0.5Kg/sqm over the APP membrane complete all as specified and directed. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.
M&L applying two coats of solar reflective bituminous aluminium paint over APP membrane @ 0.20 Kg/Sqm for two coats complete all as specified and directed.
M&L for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for fixed frame portion , shutters ,shutters frame , sliding / fixed (any track)/openable windows frame, ventilators frame, partitions with extruded built up standard tubular sections/appropriate Z sections and other sections conforming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/Neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws, complete all as specified and directed.
S&F float glass tinted 5mm thick fixed in aluminium frame with aluminium powder coated snap beading including rubber/EPDM gasket, complete all as specified and directed
S&F mild steel Mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter complete all as specified and directed.
S&F 200mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws complete all as specified and directed.
Supply and fixing Sheet glass ordinary quality glass 3mm thick and glazed with oil putty or any types of beads in square n.exc 0.5 Sqm each pane complete all as specified and directed
Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.
Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.
S&F factory made box type steel window composite type with double rebate pressed steel frames 80mmx60mm (peripheral) and 80x75mm (intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/ ventilator double shutters of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges with and including 12mmx3mm MS flat as beading for wire and putty for glazing shutter, handle of 100mm size made out of Z section 01No., MS stove enamelled black tower bolt of size 120mm 02 Nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long holdfast 04 Nos each window inluding necessary filling frame with PCC 1:3:6 type C-0 , complete all as specified and directed.
M&L for Rubber moulded coloured (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 80mm thick conforming to IS 15658-2006 M-40 grade complete all as specified and directed.
M & L for 40mm thick sand filling under floor or in foundation including watering and consolidation all as specified and directed.
M&L for providing Precast cement concrete block Type B-1, 1:2:4 (20mm graded aggregate) factory made as in Bed blocks,kerb stone etc with plain fair faces including chamfers, weatherings, throating etc.and setting in cement mortar 1:4 including dismantling of existing kerb stones and removing the debris outside the defence land complete all as specified and directed.
M & L for Acid resistant tiles 15mm thick vitreous ceramic , unglazed , set jointed and pointed in Chemical resistance motar in vertical surface such as wall etc including 10 mm thick CM (1:4) plaster for reciving for tiles complete all as specified and directed.
Material and labour, point wiring on surface with single core multi stranded copper conductor 1.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metallic rigid PVC conduit medium duty of size 19/20mm with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/fan regulators etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/ fan/bell point controlled by one modular switch, complete all as specified and directed.
All as per Serial Item No. 6.54 above but for one socket outlet 3pin, 6Amp, on independent board.
Material and labour, point wiring on surface with single core multi stranded copper conductor 4Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metallic rigid PVC conduit medium duty of size 19/20mm with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/fan regulators etc, including 4Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for 15 Amp socket , complete all as specified and directed.
Supply and fix, modular switch, one way, 6Amps, one module, complete all as specified and directed.
S&F Socket outlet 3 pin 6 amp multipurpose, modular type, 2module complete all as specified & directed.
Supply and fix ceiling rose, surface bakelite, 65mm x 50mm, three terminals complete all as directed.
Material and labour for flame proof point wiring (Concealed type) with single core multi stranded copper conductor 1.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including stove enamelled steel conduit not less than 20mm dia bore medium grade with and including all standard fittings such as Tee junction, bends, nipple, junction box, socket etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/fan/bell point controlled by one switch, complete all as specified and directed. Note : 1. Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. 2. Modular switches and sockets shall be measured and paid separately.
Supply and fixing flame proof switch/isolator cast iron body 16 Amp single pole ON/OFF, 240 volts ML-6 (rotary type) certified by CMRS and conforming to IS 2148 complete all as specified and directed.
Supply and fixing flame proof LED light fitting 1x16W/20W, flame proof, CMRI certified IP65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc, complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and as directed.
Supply and fix flame proof SPN DB 4 way with metal door IP 54 protection fixed MCB SPN 32 Amps - 01 No and MCB SP 6 to 32 Amp-02 Nos complete on pillars with MS clamps etc including electric connections, complete all as specified and as directed.
Supply and fix flame proof exhaust fan 457mm (18") sweep, 1440RPM including cutting of holes in wall and making good disturbed surface as per existing specification, complete all as specified and as directed.
S&F wall mounted air circulator metal body 600mm (24") size 1400 RPM heavy duty AC single Phase 230/240 Volts fixed on wall including making necessary connection complete all as specified and directed.
S&F LED tube light fitting 20W luminaire comprises of extruded channel in thermally conductive material high translucent serrated milky white diffuser is used to get glare free and smooth light distribution complete all as specified and directed.
S&F MCB DB TPN 04 way steel sheet phospetised powder painted with 200Amps rated bus bar with IP 43 protection 415V neutral link, earth bar and din rail double door complete all as specified and directed .
Supply and fix MCB TPN 32Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.
BLANK
Material and labour for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
Supply and laying precast concrete cable cover, class LV type 1 made of M-30 using 20mm graded stone aggregate, flat of size 250mmx150mmx40mm, complete all as specified and directed.
Supplying, laying, testing, connecting and commissioning LT cable size 10Sqmm, 4core, 1100 Volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor with suitable size cable glands, crimping type cable lugs etc, complete all as specified and directed.
Supplying, laying, testing, connecting and commissioning LT cable size 10Sqmm, 2core, 1100 Volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor with suitable size cable glands, crimping type cable lugs etc, complete all as specified and directed.
Supply and fix Air termination, single pointed aluminium rod 12mm dia and 300 mm long as per site requirement with saddle complete all as directed .
S&F Aluminium strip of size 25 x 3 mm as earth continuity conductor or main earthing lead to wall on insulator or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as directed.
S&F galvanised iron strip 32mmx6mm burried in ground in GI pipe 50mm dia light grade or laid on wall for making grid complete all as directed.
S&F GI pipe 40mm dia, 1m long medium grade with MS plate of suitable size welded as base embeded in PCC block (1:3:6) type C-1 using 20mm graded stone aggregate for fixing air termination rod complete all as directed.
Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI strip 32 x 6 as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc including dismantling of old earthing, complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.
Note:- Amount of credit of Rs.1100.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.
Anil Kumar Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .