REPAIR MAINT OF CEILING FANS , EXHAUST FANS AND CONNECTED WORKS AT OTM AND MD ACCN OF INS DRONACHARYA , SMA RAMESWARAM , DAD AND PAMPA VIHAR UNDER GE FORT KOCHI.

Amount

Disconnection of electrical wire from ceiling rose, taking down ceiling Fan of any type/Size and make, dismantling the ceiling Fan, washing and removing of old lubricating substatance from bearing/bush using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling Fan noise free for smooth functioning, including replacement of worn out/unserviceable spares as required, replacement of PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 1.0 M long, assembling the repaired ceiling fan and testing to the entire satisfication of engineer in charge and hanging at position with hanging bush, cotter pins, nut , bolts washers etc, connection with point wiring & testing complete. (Replacement of Spares flexible wire etc/rewinding of ceiling fan/shall be measured and paid seperately under respective item for material and labour cost .)

Rewinding of ceiling fan 230 volts , of any make/type and size (1200/1400 mm sweep) with copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per manufactures specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection & testing complete. Note : ceiling fan before fix at site RPM should be checked and match as per manufactures specification till entire satification of Engr in charge

Carrying out re metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the engineer satifaction of Engineer in change to ensure smooth and noise free operation (bearing shall be measured and paid seperately )

Supply ball bearing of any size and type, suitable for any type/make/size of ceiling fan for item No.1 Make - TATA/NBC/SKF

Supply and fixing capacitor capacity 2.5 MFD, 220 volt ISI marked

Supply and fixing PVC insulated, unsheathed stranded, twin twisted copper flexible cable of size 1.5 Sqmm as required.

Supply only bush of suitable size for ceiling fan of any type/size as per existing type/ size

Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts. Etc complete.

Supply and fixing PVC clamps with fixing screws for holding capacitor of any type and size.

Supply and fixing Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan sted wornout hook.

Supply and fixing in repair heavy duty Steel & rubber fan to ceiling hook attachment clamp with fan rod nut bolt & locking pins complete set

Supply and fixing MS anodized bolts with anodized nuts, spring washers, split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole complete

Supply and fixing ceiling fan blade of 1200/1400mm size of existing Make including proper painting matching with existing ceiling fan.

Supply and fixing PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing scrws all as directed.

Supply and fixing down rod 1'/1.5' suitable for ceiling fan of any type/make for both end of down rod including fixing scrws all as directed.

Cleaning of ceiling fan assembly of any type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint all as directed and specified.

Disconnection of electrical wire from exhaust fan any type / size and make, dismantling the exhaust fan, wahsing and removing of old lubricating substance from bearing/bush using Kerosine oil, carrying out fresh lubrication using grease and to make the exhaust noise free for smooth functioning, including replacement of worn out/unserviceable spares as required, replacement of PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 1.0 M long, assembling the repaired exhaust fan and testing to the entire satisfication of engineer in charge and hanging at position with nut , bolts washers etc, connection with point wiring & testing complete. (Replacement of Spares flexible wire etc/rewinding of exhaust fan/shall be measured and paid seperately under respective item for material and labour cost .)

Supply and fixing switch piano, flush type, single pole, one way, 5 Amps, complete all as specified.

Supply and fixing electronic Fan regulator stepped type flush type suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as reqd.

Rewinding of exhaust fan 300 mm sweep 230 volts , of any make/type a with super enamelled copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection & testing complete. Note : exhaust fan before fix at site RPM should be checked and match as per manufactures specification till entire satification of Engr in charge

-ditto- all as per item number 20 above but 380 mm sweep

-ditto- all as per item number 20 above but 450 mm sweep

Supply and fixing of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made o MS flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 300/380 mm sweep.

M&L for fan motor suitable for PVC body exhaust fans upto 250 mm sweep and RPM match with existing incl taking down old motor and fixing of new with proper allignment and refixing the same using necessary mounting screws and accessories without any vibrations and noise to the satisfaction of Engr-in-Charge.

Supply and fixing capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified

AR Traders

Jyothis Enterprises