Loading
Loading…
Loading…
Tender Value
₹6.4 Cr
EMD Value
₹4.7 L
Closing Date
18 Feb 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
24 conditions · 13 needing a document upload
Financial Eligibility Criteria Criteria (Para-10.2 (Pt-I) of GCC April 2022):The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per AnnexureVIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Definition of similar work: "(i) Erection and commissioning of 25KV OHE (Not PSI) Or (ii) Erection and commissioning of 132KV and above voltage transmission line". Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).
(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components.
(b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).
Contractors should have valid electrical contractors license for the required voltage level or above the required voltage level issued from any state/Central government licensing board. The intended participant shall upload the valid Electrical contractor's license along with the offer/tender as credential.
Bid Capacity: ( Not Applicable ) For works costing more than 20 cr. or as prescribed by Railways through instruction/NIT issued for the work, the tenderers who meet the minimum eligibility criteria will be qualified only if their available bid capacity is equal to or more than the total bid value of the present tender. Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI of GCC April 2022.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Regarding technical and financial eligibility criteria, scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer.
Scanned copies of documents in support of formation/registration of the company/firm/legal authorization of the person to deal with the tender/notarized/registered copies of the documents wherever required as per tender conditions are to be submitted along with offer.
If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials.
During the execution of work, all materials brought to site by the Contractor must be offered for inspection within advance notice of one month prior to actual date of inspection. Inspection of materials will generally be done by RITES. If volume of material of nature does not fall in the category of RITES inspection, then inspection of material will be done on the basis of MTC & GC ( Manufacturer's TC & GC ). All site acceptance of material must be maintained in one material receipt & issue Register which may be verified by any agency at any time
27 conditions · 16 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers shall note that the submission of other supporting documents namely- Constitution of firm/JV firm, Work in hand, Arbitration/Court cases,Tools & Plants, Technical Personnel/Man Power and Association of railway Officers, at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarifications/details/documents in this regard.
Tenderers shall note that the submission of other supporting documents namely- Constitution of firm/JV firm, Work in hand, Arbitration/Court cases,Tools & Plants, Technical Personnel/Man Power and Association of railway Officers, at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarifications/details/documents in this regard.
PLEASE FILL IN REQUIRED INFORMATION ASKED FOR IN THE SPECIFIED SPACE IN THE E-TENDER. TENDER WILL BE OTHER WISE TREATED INCOMPLETE AND HENCE WILL BE LIABLE FOR REJECTION.
THE QUANTITY SHOWN IN THE SCHEDULES ARE APPROXIMATE AND ARE LIKELY TO VARY ON EITHER SIDE (+/-) AS PER CLAUSE- 2 OF SPECIAL CONDITIONS OF CONTRACT.
Supply, Installation, Testing & commissioning of 2x25 kV OHE system in existing 1x25 kV OHE between doubling of PKA - SDBH - PEH section and SDBH - SNMY section under Dhanbad division of East Central Railway.
ELCSMHX-ETEN-07-25-26~ECR
ELCSMHX-ETEN-07-25-26
Open
Works - General
12 Months
Purbi Champaran, Bihar
₹0
₹4.7 L
18 Feb 2026
22 Jan 2026
4 Feb 2026
175 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,81,67,387.46 | ||
| — | 10.00 | — | — | ||
| "Supply and erection of fabricated and galvanised structures (O,N & R type portals) with necessary components other than masts. (a) Supply" | — | — | — | 13,30,440.6 | |
| — | 10.00 | — | — | ||
| (b ) Erection: | — | — | — | 83,796.1 | |
| — | 160.00 | — | — | ||
| Supply & Erection o f special fabricated a n d galvanised steel structures other than Portals structures (a) Supply :- | — | — | — | 1,88,55,683.2 | |
| — | 160.00 | — | — | ||
| (b) Erection:- | — | — | — | 13,40,737.6 | |
| — | 6.00 | — | — | ||
| " Supply and erection of traction masts, main masts of switching stations, Booster transformer station, fabricated from Rolled mild steel joist (RSJ) of size 203mm x 152 mm x 52.0 Kg/m and galvanised in various lengths . (a) Supply :" | — | — | — | 6,29,833.56 | |
| — | 6.00 | — | — | ||
| (b) Erection:- | — | — | — | 14,702.52 | |
| — | 16.00 | — | — | ||
| Supply only of fabricated steel other than Mast. | — | — | — | 26,18,956.96 | |
| — | 16.00 | — | — | ||
| (b) Erection:- | — | — | — | 39,206.72 | |
| — | 250.00 | — | — | ||
| Supply and erection of Cantilever assembly complete set without insulators for conventional OHE. ( a ) Supply:- | — | — | — | 35,00,000 | |
| — | 250.00 | — | — | ||
| (b) Erection:- | — | — | — | 1,75,000 | |
| — | 32.00 | — | — | ||
| Supply and erection of Guy rod assembly ( a ) Supply:- | — | — | — | 2,92,000 | |
| — | 32.00 | — | — | ||
| (b) Erection:- | — | — | — | 31,520 | |
| — | 34.00 | — | — | ||
| Supply and erection of double termination assembly conventional type Regulated OHE ( a ) Supply:- | — | — | — | 4,53,106.44 | |
| — | 34.00 | — | — | ||
| (b) Erection:- | — | — | — | 72,407.08 | |
| — | 30.00 | — | — | ||
| Supply and erection o f Regulating Equipment ( 3 pully type ) suitable for 2400 kgf tension as per RDSO spec TI/SPC/OHE/3PHATD/0150 with counterweight assembly for regulated conventional OHE (a) Supply | — | — | — | 16,49,184.3 | |
| — | 30.00 | — | — | ||
| (b) Erection:- | — | — | — | 93,622.8 | |
| — | 150.00 | — | — | ||
| Supply & erection of various item for successful erection and commissioning of feeder wire. 1) Supermast cross arm ISA 65x65x5, 2)provision of suspension support, 3)Provision of single clevis, 4) Provision of large suspension clamp, 5) Provision of batten plate, 6) Provision of snap head pin with washer and split pin, 7) Provision of bolt (M-16) 50/28 with nuts, lock nut. | — | — | — | 21,76,200 | |
| — | 14.00 | — | — | ||
| Supply of Aluminium 25 kV feeder wire. (a) Supply | — | — | — | 23,00,522 | |
| — | 14.00 | — | — | ||
| (b) Erection:- | — | — | — | 2,30,272 | |
| — | 200.00 | — | — | ||
| Supply and erection of structure bond ( a ) Supply:- | — | — | — | 1,04,670 | |
| — | 200.00 | — | — | ||
| (b) Erection:- | — | — | — | 26,072 | |
| — | 300.00 | — | — | ||
| Supply and erection of Rail bond ( a ) Supply:- | — | — | — | 1,33,227 | |
| — | 300.00 | — | — | ||
| (b) Erection:- | — | — | — | 33,456 | |
| — | 240.00 | — | — | ||
| Supply and erection of number plate ( a ) Supply:- | — | — | — | 1,77,451.2 | |
| — | 240.00 | — | — | ||
| (b) Erection:- | — | — | — | 30,504 | |
| — | 40.00 | — | — | ||
| Supply and erection of inter track bond ( a ) Supply:- | — | — | — | 32,127.6 | |
| — | 40.00 | — | — | ||
| (b) Erection:- | — | — | — | 5,152.8 | |
| — | 20.00 | — | — | ||
| Supply and erection of all type of caution and warning board Retro reflective type ( a ) Supply:- | — | — | — | 23,893.8 | |
| — | 20.00 | — | — | ||
| (b) Erection:- | — | — | — | 3,339.8 | |
| — | 15.00 | — | — | ||
| Supply and erection of earth electrodes with earthing stations ( a ) Supply:- | — | — | — | 52,327.8 | |
| — | 15.00 | — | — | ||
| (b) Erection:- | — | — | — | 22,372.5 | |
| — | 14.00 | — | — | ||
| Supply and erection o f anticreep with Galvanized steel wire suitable f o r regulated conventional OHE. (a) Supply | — | — | — | 3,11,471.86 | |
| — | 14.00 | — | — | ||
| (b) Erection:- | — | — | — | 39,196.92 | |
| — | 1.00 | — | — | ||
| Erection | — | — | — | 20,654.92 | |
| — | 1.00 | — | — | ||
| Supply of 25 KV Cu-Feeder wire (a) Supply | — | — | — | 12,64,277.38 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .