Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | L1 | Accepted-AOC Accepted Vide Resolution No.8/2025 DTD 26.08.2025 Ayyankunnu GP | |
| 2 | L2₹5.9 L+₹66,416 (12.6%)Rejected-AOC KAREDATH H KIDANGOOR P O ANGAMALY PIN 683572 | ANGAMALY | ERNAKULAM | KERALA | 683572 | L2 | Rejected-AOC second bidder | |
| 3 | Rejected-Technical | - | Rejected-Technical Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | JOY KURIAN L2 | SEYO. N.U. L3 | ABHIJITH N L1 |
|---|---|---|---|---|---|---|
| 1.00Portable Mini MCF | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.15 | cum | 335.74 ₹386.77 | 385.74 ₹444.37 | 335 ₹385.92 Lowest |
| 1.00 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 40 mm nominal size derived from natural sources) | 1.73 | cum | 8,458.49 ₹14,616.27 Lowest | 8,598.32 ₹14,857.9 | 8,460 ₹14,618.88 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,362.49 | kg | 174.58 ₹2,37,863.5 | 184.36 ₹2,51,188.66 | 126.5 ₹1,72,354.99 Lowest |
| 1.00 | 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | 1,179.15 | kg | 211.83 ₹2,49,779.77 | 221.36 ₹2,61,017.09 | 211.8 ₹2,49,744.39 Lowest |
| 1.00 | OD136460/2025-2026:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25mm microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 57.6 | sqm | 536.77 ₹30,917.95 Lowest | 556.32 ₹32,044.03 | 540.3 ₹31,121.28 |
| 1.01 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 32 | metre | 878.78 ₹28,120.96 | 888.72 ₹28,439.04 | 850 ₹27,200 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 144 | sqm | 153.87 ₹22,157.28 | 163.57 ₹23,554.08 | 153 ₹22,032 Lowest |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 1,584 | per Letter per cm height | 5.92 ₹9,377.28 | 6.11 ₹9,678.24 | 5.9 ₹9,345.6 Lowest |
Tender Value
₹5.9 L
EMD Value
₹14,830
Closing Date
23 Aug 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sreevidya S
Office of the Assistant Engineer LID EW Section Ayyankunnu Grama Panchayat
Pro No 142 2025 26 Construction Of Mini MCF Waste material collection General Civil Work
2025_LSGD_787090_2
04/2025-26/AE/LSGD/AKGD
Open Tender
Civil Works - Buildings
Item Rate
Ayyankunnu GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,310
Yes
₹14,830
Yes
3 Sept 2025
16 Aug 2025
25 Aug 2025
16 Aug 2025
23 Aug 2025
16 Aug 2025
Amount
Portable Mini MCF
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
OD136460/2025-2026:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25mm microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.71:Lettering with black Japan pint of approved brand and manufacture
JOY KURIAN (BID ID -2303242)
SEYO. N.U. (BID ID -2303298)
Bidder Name
JOY KURIAN
SEYO. N.U.
ABHIJITH N
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1294310.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .