Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.1 LAccepted-AOC B 630 DHANWANTRI NAGAR JABALPUR M P 482003 | JABALPUR | MADHYA PRADESH | 482003 | L1 | Accepted-AOC AS PER CWC DECITION | |
| 2 | L2₹85.5 L+₹1.5 L (1.73%)Rejected-AOC G 4 PLOT NO B 22 RADHE KRISHNA RESIDENCY HARISHANKAR PURAM GWALIOR HARISHANKAR PURAM GWALIOR MADHYA PRADESH 474009 | GWALIOR | MADHYA PRADESH | 474009 | L2 | Rejected-AOC AS PER CWC DECITION | |
| 3 | L3₹85.5 L+₹1.5 L (1.75%)Rejected-AOC DIWANBADA MANEGAON POST OFFICE KHAMARIA JABALPUR 482005 M P | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-AOC AS PER CWC DECITION | |
| 4 | L4₹86.0 L+₹2.0 L (2.34%)Rejected-AOC JABALPUR | L4 | Rejected-AOC AS PER CWC DECITION | |
| 5 | L5₹86.5 L+₹2.4 L (2.90%)Rejected-AOC | L5 | Rejected-AOC AS PER CWC DECITION |
Tender Value
₹99.9 L
EMD Value
₹1.7 L
Closing Date
21 Aug 2023, 6:00 pmClosed
GENERAL MANAGER, ORDNANCE FACTORY KHAMARIA
ORDNANCE FACTORY KHAMARIA
Provision of boundary wall for inspection bungalow and B. No.25 in west land area at OFK.
2023_MIL_161458_1
3320/EO/CONT/23-24/16
Open Tender
Civil Works
Item Rate
180 days
ORDNANCE FACTORY KHAMARIA
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹1.7 L
Yes
5 Jan 2024
4 Aug 2023
25 Aug 2023
4 Aug 2023
21 Aug 2023
4 Aug 2023
4 Aug 2023 - 21 Aug 2023
Amount
Surface excavation for Site Clearance upto a depth n exe 30 CM & avraging 15 CM complete soft /loose soil.
Earthwork in excavation in over area n exc 1.50m in depth in soft and loose soil.
Removing excavated material of soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point .
Boring holes 300 mm diameter 2.00 mtr deep in soil for under - reamed piles and getting out and disposal of soil to a distance of n exc. 50m.
M & L hardcore of broken stone or boulder of gauge n. exc. 63mm, deposited, spread,and levelled in layers n. exc. 15 cm thick, watered and rammed to true surface.
Cement concrete in foundation, filling and mass concrete type D2 1:4:8 , 40mm graded aggregate
RCC M-20(Design Mix)( 20mm graded aggregates) Foundations, including rafts , footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat.
M&L for RCC design mix - 20 ( using 20mm graded stone aggregrates ) as in columns , pillers, piers , posts and sturts and the like etc, complete all as specified & directed .
M&L Formwork to sides of pillars, posts, struts, piers, column (square, rectangular, polygonaland stanchions rough finished surfaces of concrete flat.
M&L for design RCCmix M-20(using 20mm graded aggregates) in Beams, cantilevers, bressummers, lintle over 1.5m span
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc
M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed .
M&L for 15 mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surface , finished evan and smooth without using exta cement complete all as specified and directed
M&L, apply two coats of cement paint on new wall surfaces .
M&L, applying 3mm thick wall care putty on wall.
M & L prepration of old painted wall Surfaces ( COMPLETE REMOVED OLD PAINT) of anydescription, over 10cm in width or girth, not otherwise described and applying two coat of plastic (exterior) emulsion paint, over one coat of primer. Approved by -EIC
M & L prepration of new wall Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of plastic (exterior) emulsion paint, over one coat of primer. Approved by - EIC
M&L for mild steel TMT bars 10 mm dia and over as in rienforcement for concrete , cut to length , bent to shape required , including cranking , bending spirally for columns , hooking ends and including mild steel wire (annealed ) not lessthan 0.9mmdia complete all as specified and directed.
M&L for mild steel TMT bars 8 mm dia and over as in rienforcement for concrete , cut to length , bent to shape required , including cranking , bending spirally for columns , hooking ends and including mild steel wire (annealed ) not lessthan 0.9mmdia complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.
M & L prepration of old painted steel Surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint approved by- EIC
AMARNATH ENTERPRISES
C L BHATIA
M/S BRIJESH SONKER
B.D. TRADERS
RAFAKAT HUSSAIN GENERAL CONTRACTOR
C S RAJ SHEKHAR MUDLIAR
SINGH TRADING COMPANY
SHRI KRISHNA CONSTRUCTION
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .