Special repairs to Top Floor of building No. P-20 Dhruv P-39 Eklavya under GE NB Visakhapatnam

Amount

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish outside MD land to a distance exceeding 5 KM and not exceeding 10.00 KM complete all as specified and as directed.

Demolition of Plain Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish outside MD land to a distance exceeding 5 KM and not exceeding 10.00 KM complete all as specified and as directed.

Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish outside MD land to a distance exceeding 5 KM and not exceeding 10.00 KM complete all as specified and as directed.

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

Taking down Chowkats or frames with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each complete all as specified and as directed.

Taking down Chowkats or frames with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sq.M but not exceeding 2 Sq.M each .complete all as specified and as directed.

Dismantling of Wall & Ceiling Boards [Fibre / Pulp / Insulation etc] of any description or Insulation Boards / Slabs / Blankets including cover fillets complete all as specified and as directed.

Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed.

Demolition of Stone Slab laid, bedded and pointed in Cement Mortar of thickness and removing serviceable slabs to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed.

Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.

Taking down existing SWR Pipes of any description or size or pattern, including all fittings, heads, shoes, bends, swan-necks, etc. from any height complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping, Bed plate, cill and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.

M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in roof padding, levelling course and the like including finishing the top surface even and smooth without using extra cement complete all as specified and directed.

M & L for RCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in lintels, Coping, Bed plate, cill, parapets and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.

M & L for Providing Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate exceeding 100mm width with plain or interlocking joints set in cement mortar 1:6 complete all as specified and as directed.

M & L for Providing Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate not exceeding 100mm width with plain or interlocking joints set in cement mortar 1:4 complete all as specified and as directed.

Supply only integral water proofing compound [ISI marked] of approved make.

S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 4 mm thick, Veneered Decorative Plywood, Grade - I [with BWR resin] with Decorative Face Veneers on both faces, fixed with glue and including French polishing one or more coats on surfaces of any description, including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.

S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening of Sintex ot its equivalent make as approved by GE complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed.

M & L for Powder coated aluminium sections of approved colour for doors, Windows, Ventilators, Partitions, with frames and shutters fully or partly glazed, sliding / openable, with extruded aluminium sections not less than 1.5mm thick and powder coating not less than 60 micron thick including necessary jointing cleats, rubber beading, neoprene packing, aluminium snap beading, screws, powder coated aluminium fittings such as handles, aluminium butt hinges , aluminium tower bolts, stainless steel friction hinges, locking arrangements etc. complete all as specified and as directed. Notes: [a] The size of aluminium extruded sections shall conform to Designation 63400 all shall be as specified in relevant IS code and as specified in MES Schedule Part - I. [b] Panel inserts such as Glass / Particle board / Gauze and grill shall be measured and paid separately at supply only rates. [c] Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for payment purpose. [d] The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges,Peg stays, locking arrangements etc., and fixing only of panel inserts of glass / particle board / gauge etc and grills.

Supply only 5mm thick Sheet Glass ordinary quality in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

Supply only Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm complete all as specified and as directed.

Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm complete all as specified and as directed.

S & F 18mm thick Plywood, Grade BWR, Type BB ply, fixed with screws to Wooden Frames complete all as specified and as directed.

S & F 0.9 mm thick Decorative Laminate, Type - 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S & F 125 mm size Butt hinges, extruded aluminium alloy, anodised, with galvanised mild steel hinge pin type B22 complete all as specified and as directed.

S & F 125 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed.

S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed.

S & F brass barrel Tower Bolt of size 200 mm size with cast or sheet barrrel and rolled cast bolts complete all as specified and as directed.

S & F Brass Sliding Door Bolt Sliding Door Bolt with sand or die-cast brass hasp and staple [Bolt Type] of size 300 mm and fixing bolts with rolled or drwan brass bolts complete all as specified and as directed.

S & F in repairs Stainless steel double action self closing types hinges, medium weight complete all as specified and as directed.

S & F in repairs Stainless steel designer handle, 200mm long complete all as specified and as directed.

S & F Brass Handles, Cast Type, Polished Bright of size 150mm long complete all as specified and as directed.

S & F 150mm long Aluminium anodised Handle, of extruded section Fabricated Type complete all as specified and as directed.

S & F Magnetic Catches with Striking Plate, any type/ pattern, brass body, First quality complete all as specified and as directed.

S & F Floor Door Stopper of size 150 mm of brass body and tongue, with hard drawn steel spring complete all as specified and as directed.

S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre complete all as specified and as directed.

S & F in repairs Decorative type Stainless Steel Brackets with finial suitable for 25mm dia curtain rods fixed to wall with rawl plug and SS screws complete all as specified and as directed.

S & F in repairs Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium body complete all as specified and as directed.

S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Bands, Straps including Bolts, if required, Hold Fasts, Wall Ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles complete all as specified and as directed.

M & L for providing and fixing stainless steel railing made of Grade AISI 316, standard quality, using hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, grouting with epoxy to achieve full strength of railing on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed.

S & F Solar Control Film, 25 Micron thick, reflective type all aspecified and as directed.

S & F in repairs corrugated Aluminium Sheet Alloy 31000 H4, 0.71 mm thick, Stucco embosed finish with two corrugation side laps, fixed with coach screws and aluminium washers in roof and wall, etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart complete all as specified and as directed.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion complete including taking down existing Roof Treatment of any description and removing rubbishoutside MD land to a distance exceeding 5 KM and not exceeding 10.00 KM complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

M & L for Chequered Cement Concrete Tiles of size 250 X 250 mm / 300 X 300 mm, 25mm thick, Hydraulically pressed as in Terrace Floors, with grey cement and no pigments, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:3 complete all as specified and as directed.

M & L for application of high build polymer modified cement mortar, 1:2½ mixed with 3 Litres of Nitobond SBR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or or M/s. Choksey Chemicals Pvt. Ltd. or M/s BOSTIk India Pvt. Ltd. per bag of cement in ceiling surfaces in two layers to form 10 to 20 mm thick even surface over a coat of bonding agent by mixing Nitobond SBR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or or M/s. Choksey Chemicals Pvt. Ltd. or M/s BOSTIk India Pvt. Ltd. @ 1 Litre + 1 Litre water + 3 KG cement complete all as per manufacturer's instructions.

M & L for providing sunken floor treatment with the following specifications: [a] Preparation of existing sunken floor surfaces by mechanical abrading to remove all loose mortar, laitance, oil, grease, etc. and washing with water. [b] Cracks, if any, found shall be repaired by cutting 'V' grooves along the cracks and filled with single component polymer modified repair mortar all as sper manufacturer's instructions. [c] Injection grouting for cracks on negative side of surface with neat cement slurry by adding shrink compensating grout additive @ 250 grams per 50 Kg bag of cement by drilling hole of 12mm dia along the cracks at a distance n. exc. 500mm and fixing the nozzles using fast setting single component instant leak stop special cement. [d] Provision of cement mortar angle fillets of size 50mm along the floor and wall junction in cement mortar 1:3 admixed with acrylic emulsion based polymer at the rate of 5% by weight of cement. [e] Provision of two coats of two component elastomeric acrylic polymer modified cementitious water proofing coating having 100% elongation as per ASTM D 412, resisting 5 Bars positive hydrosatic pressure, and 4 Bars negative hydrostatic pressure as per DIN 1048, reduction to rapid chloride as per ASTM C -70, crack bridging upto 12mm as per ASTM 4548.5, mixed and applied all as per manufacturer's instructions, as specified and as directed. [f] Redering 15mm thick in cement mortar 1:3 mixed with approved integral liquid water proofing compound as per manufacturers instruction finished even and fair. Make : SMARTCARE of Asian Paints Ltd. or equivalent approved make in M/s Sika India Pvt. Ltd./ M/s. Fosroc Chemicals / M/s. STP Ltd./ M/s. Choksey Chemicals Pvt. Ltd./ M/s Bostik India Pvt. Ltd.

M & L for treatment to leakages/ seepages aroung pipes paasing through walls / core cut area by application of single component acrylic bonding agent based on modified acrylic co-polymers around the pipe and cut bores and grouting the gaps with free flow self compacting non shrinkable high strength cementitious grout including use of leak free shuttering as required all as per manufacturer's instructions, as specified and as directed. Make : SMARTCARE of Asian Paints Ltd. or equivalent approved make in M/s Sika India Pvt. Ltd./ M/s. Fosroc Chemicals / M/s. STP Ltd./ M/s. Choksey Chemicals Pvt. Ltd./ M/s Bostik India Pvt. Ltd. Note: The water proofing treatment works catered vide item Nos. 54 to 56 of this BoQ shall be got executed through the Authorised Applicator of the Manufacturer and under the guidance of Manufacturer.

Notes for BoQ item No. 54 to 56: [a] The water proofing treatment works catered vide item Nos. 54 to 56 of this BoQ shall be got executed through the Authorised Applicator of the Manufacturer and under the guidance of Manufacturer. A certificate to this effect shall be produced by the contractor/ applicator from the manufacturer. The make and authorized applicator of that manufacturer shall be got approved from GE before commencement of work. [b] All necessary manufacturer’s test certificates for the properties of constructions chemicals shall be produced by the contractor before icorporating in the work. [c] Contractor shall furnish a written guarantee to GE for a period of 05 [Five] Years from the certified date of completion by the GE for the effectiveness of the Water proofing treatment on Non-Judicial Stamp Paper of ₹ 100.00. [d] Security Deposit against the guarantee period for effectiveness of the Water proofing treatment for 5 [Five] Years shall be calculated @ 3% of the amount of Water proofing treatment works at contract rates and shall be retained by the Government from the contractor dues.

S & F 12mm thick Gypsum board false ceiling with GI Frame work using GI perimeter channels of 0.55 mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, fixed to wall with nylon sleeves and screws at 610 mm intervals, GI intermediate channels of size 45 mm X 15 mm X 0.90 mm supported with GI ceiling angles of size 25 mm X 10 mm X 0.55 mm fixed to soffits with steel expansion fasteners / GI cleats at 1220 mm intervals, ceiling section of 0.55 mm thick having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to intermidiate channel with connecting clips and in direction perpendicular to the intermidiate channels at 457 mm centre to centre fixing of ceiling boards with 25 mm dry wall screws at 230 mm centres to Frame Work including and applying two or more coats of Cement based Wall Care Putty of make JK / Birla / Jenson & Nicholson / Altec / Laticrete on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer on ceiling complete all as specified and as directed.

S & F designer gypsum cornice mouldings not less than 75mm fixed to seamless false ceilings all as per manufacturer's instructions, as specified and as directed.

M & L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in sunken floor fillings, Mass concrete, etc complete all as specified and as directed.

M & L for 25 mm average thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in levelling course over sub base, surface finished even and fair to receive topping layer complete all as specified and as directed.

M & L for Vitrified Tiles, Coloured, Polished, Glazed, Light Shade, Premium Quality, size not exceeding 0.36 Sq.m, 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Coloured, Polished, Glazed, Light Shade, Premium Quality, size not exceeding 0.36 Sq.m, 10 mm thick on Vertical Surfaces such as Skirting, Dado etc, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade/ design of tiles shall be as approved by GE.

M & L for Non Skid Ceramic Tiles, Edge cut, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Non Skid Ceramic Tiles, Edge cut, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 8 to 9mm thick [Square or Rectangular] as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 8 mm thick [Square or Rectangular] on Vertical Surfaces such as Skirting, Dado, etc. set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Non Skid Ceramic Tiles, Edge Cut, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 8 to 9 mm thick [Square or Rectangular] on Vertical Surfaces such as Skirting, Dado, etc. set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.

M & L for Marble Stone Slabs of 18 to 20 mm thick of Green Colour, Premium quality, as in Flooring, Treads and Risers of Steps, Landings of Staircase etc. with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, slabs shall be of design / pattern as directed, including inlays, borders, margins, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious joint filler to match the shade of the Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire width of Steps, Risers & Landing etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

M & L for preparing newly plastered ceiling surfaces by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling surfaces complete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.

M & L for Complete removal of existing treatment of any description on ceiling surfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on ceiling surfaces complete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.

M & L for preparing newly plastered wall surfaces by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.

M & L for Complete removal of existing treatment of any description on wall surfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.

M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered ceiling, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surface complete all as specified and as directed. Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicators before commencement of the work to GE for approval.

M & L for One coat of synthetic enamel paint on old painted wooden surfaces of any description not other wise described over 10 cm width or girth incuding necessary preparation of surfaces complete all as specified and directed.

M & L for One coat of synthetic enamel paint on old painted steel surfaces of any description not other wise described over 10 cm width or girth incuding necessary preparation of surfaces complete all as specified and directed.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth and treating with tar or coal tar black paint complete all as specified and as directed.

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 32 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F in repairs 20mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing complete all as specified and as directed.

S & F in repairs 32mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing complete all as specified and as directed.

S & F in repairs Bib Taps, Brass, Chromium Plated, Fancy Type, with wall flange screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. FLR-5047N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/Prayag complete all as specified.

S & F in repairs, Brass Chromium Plated Basin Mixer without Popup Waste System with 375mm Long Braided Hoses with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as per Jaquar Catalogue No. ARI-39001B or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Brass Chromium plated Single lever 3-in-1 Wall mixer, 15mm dia, with provision for connection to both Hand shower and Overhead Shower complete with 115mm long bend pipe, connecting legs & wall flange complete [excluding hand & overhead shower] as per Jaquar Catalogue No. KUP-35125PM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Double Arm Wall Mounted Mirror, Reversible Plain / Magnifying (X3) Pivotal Mirror, chrome finish, fixed to wall complete all as specified and as directed. Make: Jaquar Catalogue No. ACN-1193N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag

S & F in repairs Stainless Steel Toilet Paper Holder, Chromium plated, with Flap Recessed Type complete all as per Jaquar Catalogue No. AHS-1553 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Angular Stop Cock, Brass, Chromium Plated, screwed down high pressure for iron pipe etc. complete all as per Jaquar Catalogue No. KUP-35053PM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Two way Bib Taps, Brass, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. FLR-5041N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Brass Chromium Plated Towel shelf/ rack, 600mm long, without Lower Hangers, complete all as per Jaquar Catalogue No. AKP-35781P or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Brass Chromium Plated Towel Ring, square type with round wall flange complete all as per Jaquar Catalogue No. ACN-1121N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Health Faucet with 1.2 m long flexible tube, wall hook, non return valve complete as per Jaquar Catalogue No. ALD-573 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Stainless Steel, Tubular Towel Rail, D Type, 600 mm long between flanges complete all as per Jaquar Catalogue No. ACN-1111SM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/ Prayag complete all as specified.

S & F in repairs Corner Glass Shelf with wall Bracket and CP Cage complete as per Jaquar Catalogue No. ACN-1173 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine/Prayag complete all as specified.

S & F in repairs Vitreous China Rimless Single Piece Wash Down Water Closet [Pedestal Pattern], of White Colour, with UF Soft Close Seat Cover, Dual Flush cistern, Hinges, Fixing Accessories and Accessories Set, Cistern Fittings, S Trap-300 mm, PVC Connection of 15mm Bore and 600mm long with Brass Check Nut and Union etc. including connecting to soil pipe and making good disturbed surfaces complete all as specified and as directed. Make: Model No. ONS-WHT-10853S300UFSM of Jaquar or equivalent in Kohler / Roca / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

S & in repairs Vitreous China Ware Thin Rim Wash Hand Basin, White, Table Top, Rectangular shape, size 495 mm X 395 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, 32mm bore PVC flexible waste pipe, PVC Connection of PTMT complete all as specified and as directed. Make: Model No. JDS-WHT-25909 of Jaquar or equivalent in Kohler / Roca / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

S & F Frameless Wall to Wall Shower Enclosure with one fixed glass and one openable door fixed on the Wall, size 1200 x 1600 x 1950 mm, with 10mm thick tempered glass of textured/ frosted type and brass hinges and fittings with chrome finish, fixed complete to wall all as per manufacturer's instructions, as specified and as directed. Make: Cat No. JSE-CHR-R820W1216L of JAQUAR or equivalent in Hindware/ Parryware/ Cera/ Johnson

S & F Frameless Corner shower enclosure with two fixed glass and openable door fixed on the side panel, size 1600 x 2000 x 1950 mm, with 10mm thick tempered glass of textured/ frosted type and brass hinges and fittings with chrome finish, fixed complete to wall all as per manufacturer's instructions, as specified and as directed. Make: Cat No. JSE-CHR-840L1620H19X of JAQUAR or equivalent in Hindware/ Parryware/ Cera/ Johnson

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solcent cement joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solcent cement joints, laid in trenches or in floors complete all as specified and as directed.

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solcent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solcent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] vent cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] Gully Trap with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs PVC [SWR] Floor Trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs PVC [SWR] Multi Trap, 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.

Taking down Main Switches, MCCB DBs, MCB DBs, SPN / TPN Enclosures including MCCBs, MCBs etc of any description and any capacity and making good the disturbed surfaces all as per existing complete all as specified and as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, Two runs, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Metal GI Flush Box of suitable size and thickness including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point complete all as specified and as directed.

All as per Serial Item No. 118 above but One light point controlled by 2 Nos of Two way switches complete all as specified.

All as per Serial Item No. 118 above but one 3 Pin Socket Outlet 6 Amps on independent board, complete all as specified.

All as per Serial Item No. 118 above but one 3 Pin Socket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.

All as per Serial Item No. 118 above but one 3 Pin Socket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.

S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed.

S & F Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed.

S & F Switch, Modular Type, One Module, Single Pole, Two Way, 6 Amps, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed.

S & F Socket Outlet, 3 pin, 16 Amps cum 3 pin 6 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed.

S & F Ceiling Rose, PVC Body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed.

M & L for Sub main wiring with 4 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 32 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable submain wiring and wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. Note: 5 runs of 6 Sq.mm & one run of 32 mm dia PVC Conduit will be measured as one unit.

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable submain wiring and wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit.

S & F Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% including provision of Electronic speed control Regulator step type, including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing unserviceable ceiling fans of any description and size and depositing into MES stores complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account.

M & L for Taking down Ceiling Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including cleaning, greasing and spray painting with one coat of synthetic enamel paint of approved colour after filling cavities with filler and complete all as specified and directed.

S & F Exhaust Fan, 250mm Sweep, 1400 RPM, PVC Body, Heavy Duty, with Double Ball Bearing, Conforming to IS - 2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter/ Grill, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and fixing in existing opening and making good the disturbed surface to match including taking down existing unserviceable exhaust fans of any description and size and depositing into MES stores complete all as specified and as directed. Make: Crompton Greaves / Havells / Almonard / Bajaj / Orient

S & F MCCB DB, VTPN, 4 Way, 415 Volts with DIN Channel, N3 Frame, Double Door with 250 Amps rated bus bar suitable for mounting MCBs and provision for MCCB as incomer complete all as specified and as directed.

S & F MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.

S & F MCB, SPN, 40 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed.

S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed.

S & F MCCB 415 V , 25 KA, 4 Pole, 125 Amps capacity complete all as specified and as directed.

S & F in repairs SP&N Enclosure with 2 Pole and Earth Metal Plug & Socket, with and including One MCB, SP&N/ DP, 20 Amps, 240 Volts complete all as specified and as directed.

Fixing only in repairs SP&N Enclosure with 2 Pole and Earth Metal Plug & Socket and One MCB complete all as specified and as directed.

S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1000 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

S & F in repairs LED Sticker Light Fitting, 2/3 Watts, 4000 K, Square/ Round type, with die cast aluminium housing, acrylic diffuser and integrated electronic driver, fixed to ceiling with all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable size including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

S & F in repairs LED Picture Light Fitting, 7 Watts, 3000 K, Antique type, with metal body and Bronze finish and integrated electronic driver, fixed to wall with all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable size including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 Make: Model No. 31402 [Muziris] of Philips or equivalent approved model in the makes mentioned in Particular specifications

S & F in repairs Recessed mounted LED indoor Spot Light, Natural White, Round type suitable for fixing into Ceiling with Lumen output not less than 600, 4000 K, with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 Make: Model No. CDR-211-06-40-SL-NWH of Crompton or equivalent approved model in the makes mentioned in Particular specifications

S & F in repairs Surface mounted LED indoor ceiling Light, Square Flat Panel type with Lumen output not less than 1800, 2700 K, PDC aluminum housing and PMMA diffuser with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 Make: Model No. LSCSM-18W-WW of Crompton or equivalent approved model in the makes mentioned in Particular specifications

S & F in repairs UPVC Pipe of 50 mm bore, of pressure rating 10 KGf / Sq.cm as in AC drain pipes including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, sockets etc and fixed to walls, ceiling, and laid on floors including testing complete all as specified and as directed.

All as described in item No. 147 above but 20 mm bore pipes

S & F in repairs PVC Flexible Hose Pipe of 20 mm bore, as in AC drain pipes and fixed to walls, ceiling, and laid on floors including testing complete all as specified and as directed.

SAI SRINIVAS CONSTRUCTIONS

SRI SIMHADRI COMPANY