SPECIAL REPAIRS TO BLDG No HT 1 1 TO 6 OF 140 AD REGT UNDER GE SOUTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of interior acrylic emulsion over a coat of primer over a coat of 2mm thick wall care putty complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated brick/concrete plastered/unplastered surfaces of walls, pillars, cornices by booming down with steel wire brushing, scraping down smoke soot moulds, moss and efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint on the wall/pillar/cornices complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.06 sqm and not exceeding 0.11 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including roughening surfaces of floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0 kg of cement per sq. metre complete all as specified and directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.06 sqm and not exceeding 0.11 sqm and 7 to 8 mm thick, laid on vertical surfaces of skirting/dado, over and including rendering 10mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, printed glazed coloured ceramic tiles of size 300x200x7mm thick on vertical surfaces of walls such as skirting, dado, riser to steps etc. over and including 10mm thick plaster in cement mortar (1:3), set, jointed in neat cement slurry @ 3.0 kg of cement per sq. metre and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm thick PCC (1:2:4) type B1 (using 12.5 mm graded stone aggregates) set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid on vertical surfaces of skirting/dado, over and including cement screed bed 10mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.

Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25mm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer ,complete all as specified and as directed.

Material and labour for factory made second class hard wood, 35mm thick, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing of mild steel pressed handles, 150mm long, oval type, stove enamelled black complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described including knotting and stopping and applying one coat of approved colour synthetic enamel paint complete all as specified and as directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of steel ventilators, fixed type, with glazing bars confirming to IS 1038-1983 and IS 7452-1990 complete all as specified and directed.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid panel PVC moulded door shutter with wood free EPS, 28 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, including suppling & fixing in the frame at site as per specification & drawing, with and including 3 Nos. stainless steel butt hinges of 100mm size for fixing the shutter complete all as specified and directed.

Supply and fixing of aluminium anodised, 200mm long, barrel tower bolts of extruded section, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of aluminium handles, 150mm, cast type, anodised complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as above Item No 37.00 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 36 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Material and labour for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in replacement of 15mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Refixing old serviceable steel water tubing of 15 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including taking down complete all as specified and as directed.

Refixing old serviceable steel water tubing of 20 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including taking down complete all as specified and as directed.

Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in replacement, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed.

Supply and fixing in replacement, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Supply and fixing in replacement of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repairs of bib tap, 15mm bore, fancy type, chromium plated, ISI marked, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed and taking down and removal of existing unserviceable tap of any description and size complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in repairs of stop valve, 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type), ISI marked, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and taking down and removal of existing unserviceable stop valves of any description and size complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in repairs of angle valve, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with capstain head, heavy with adjustable wall flange, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed and taking down and removal of existing unserviceable angle valves/valves of any description and size complete all as specified and as directed. Note : Weight of angle valve shall not be less than 0.575 Kg

Supply and fixing of 15mm bore brass chromium plated pillar tap, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and taking down and removal of existing unserviceable pillar taps of any description and size complete all as specified and directed.

Supply and fixing in replacement of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing in repairs, brass chromium plated shower rose,125mm size, with or without swivel joints, any size. including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing stainless steel plate rack 1mm thick of grade SS 304, of size 900mm x 900mm x 200mm weighing not less than 10 Kg each fixed with stainless steel screw to wall, complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in floors or trenches complete all as specified and directed.

Supply and fixing in repairs of PVC ( SWR) vent pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) bends, 75 mm bore, of any radius complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) floor trap, 75mm outlet dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggrgates as in surface channels and drains including necessary formwork complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.complete all as specified and as directed.

Supply and fixing of harrison rails as curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Supply and fixing in replacement mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed.

Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, AZ-150 conforming to IS-15961, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets of any descriptions as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Dismantling timber scantlings 40 sq. cm and over in section in any position in framed or unframed work and removal from site complete all as specified and as directed.

Supply and fixing of rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.including necassary cutting, drilling, welding etc quality conforming to Fe 410-W (Gde E-250) quality-A complete all as specified and as directed.

S&F anodised aluminum snap grid frame work of size 605 X 605 mm for false ceiling including 4mm thick designer decorative type asbestos cement ceiling board (E board) including two coats of acrylic emulsion paint over a coat of primer including necessary notching, snap grid consisting of anodised aluminum main / cross tee of size 36.5 mm X 25 mm X 1.4 mm weighing 0.24 Kg / RM and 23.5 mm X 26.4 mm X 1.40 weighing 0.191 Kg per RM respectively, fixed to ceiling with supporting hanger consisting of 3.15 mm dia GI wire with necessary bolts and nuts and washers, main and cross tee shall be jointed at junction / crossing with anodised aluminum angle bracket of size 15 mm X 15 mm X 1.50 mm weighing 0.12 Kg / RM fixed with suitable MS bolts nuts and washer, snap grid (main / cross tee section) shall be supported at ends all along the wall with anodised aluminum angle of size 40 mm X 25 mm X 2 mm weighing 0.36 Kg / RM fixed to walls with suitable arrangements, including taking down old ceiling as existing and removal from site complete all as specified & directed.

Supply and fixing in replacement of stainless steel grating suitable for 75mm bore pipe complete all as specified and directed.

Supply and fixing in replacement of grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

Supply and fixing in replacement of soap dish chromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25mm dia with accessories, concealed on wall/ ceiling and including 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with and including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal confirming to IS-5139 (Pt-I) of 1969 and IS: 14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including new 3mm thick plastic laminated sheet top cover extended up to 25mm over sunken box all around for housing the switches, socket outlet, fan regulator etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/ fan point controlled by one switch complete all as specified and directed. Notes :- (i) Switch, socket, lamp holder, ceiling rose and fan regulators to be measured and paid for separately. (ii) PVC Conduit shall conform to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only.(iv) The concealed conduits and MS boxes shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.77.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No.77.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.77.00 here in before but for one bell point controlled by one bell push

Description all as per serial item No.77.00 above, but for one socket point 3 pin 15 Amps (independent) power point, with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch piano, 5 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of switch piano, 15 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of bell push, 5 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, 3 pin, 6 amps, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, 2 in 1, 6 pin, 5/16 Amps, multi pin, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of door bell, ding dong/musical type, single phase, 230 volts, ISI marked complete all as specified and as directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing in replacement of fan regulator electronic step type (socket type), 230 volts, 50 Hz, AC supply, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing in replacement of retrofit LED Bulb of 9 watt suitable for batten holder B-22 complete all as specified and directed.

Supply and fixing in replacement channel for fixing of LED tube rod 4 ft length, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers connecting with copper conductor flexible cable from ceiling rose to connector of the light suitable for two end connect complete all as specified and directed. Note:- LED tube rod shall be measured and paid separetely.

Supply and fixing in replacement 18/20 watt LED tube rod 4 ft length,environment friendly, high efficient, T-8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency suitable for fixing in LED light fitting complete all as specified and directed. Note:- Channel for fixing LED tube rod shall be measured and paid separetely.

Supply and fixing of decorative, surface mounted, LED mirror light, wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, and compact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing old unserviceable light fitting of any description and removal from site complete all as specified and directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and inpact resistance of IK09 long life, 50000 burning hours, including connecting up using three core, twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light and disconnecting and taking down of existing light fitting and removal complete all as specified and directed .

Supply and fixing in replacement of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Material and labour for sub main wiring with two single core, 4 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 4 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 4 core, 16 Sqmm and laying in trenches including taking down old cable complete all as specified and as directed. Note :- Excavation and earth work shall be measured and paid separetely.

Supply and fixing of sheet metal enclosures vertical load line TPN distribution board, 4 ways, double door powder coated alongwith 200 Amp rated busbar with and including MCCB 4 pole 125 Amp adjustable type as incomer with suitable size of MS cabinet fabricated by 2mm thick MS sheet and making all type of connections using proper size of gland for incomer cable complete loadline TPN concealed on wall surface & making good the disturbed surfaces as per existing and dismantling and taking down the existing DB's of any type complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 12 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable DB with MCB of any capacity, size and type complete all as specified and directed. Note :- MCB shall be measured and paid separetely.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6-32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of MCB, single pole and neutral , 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 40-63 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 40-63 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of sheet metal enclosure, single pole with a two pin and earth plug and socketcomplete with one single pole MCB of 20 to 32 Amps, 'C' Curve, 240 volts complete all as specified and directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- The punned thickness 18cm shall be considered for payemnt purposes.

Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and as directed.

Supply and fixing in replacement of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed.

Supply and fixing of exhaust fan 300mm sweep with louvers, heavy duty metal body, single phase, suitable for 230 volts 50 Hz and fixing with suitable size clamps, nuts and bolts and connecting up the fan with and including 3 core flexible cable from ceiling rose to connector of fan including necassary cutting hole in wall and grouting bolts of suitable size and making good the disturbed surfaces as per existing complete all as specified and directed.

Note:- Amount of credit of Rs. 73,699.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 17R & 18R of tender documents in pdf form which will be deducted offline while acceptance of tender.

RAJESH KUMAR

CHIBBER and SONS

S M BUILDERS

Sham Sunder Bansal

Gupta Enterprises

Ashwani Kumar

Karishan Kumar goel