SPECIAL REPAIRS TO FENCING AROUND OFFRS MD ACCN IN SHAITAN SINGH ENCLAVE AT ARMY AREA AND KONARK CSD BLDG NO 845 ML AT KONARK COMPLEX AND CERTAINS MISC SANCTION WORKS IN THE AREA OF AGE BR II UNDER GE ARMY CENTRAL IN ARMY AREA JODHPUR (9042/E8)

Amount

Dismantling of posts or struts (wood, steel or RCC) any section,embedded in Cement concrete under natural ground including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of fencing wire mesh, any type and any size complete all as directed.

Excavation in post holes each not exceeding 0.5 Cum, getting out in any type of soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface, complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed by Engineer-in-charge.

S&F mild steel sections like angle, flat etc in post and struts in fencing including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L for rolled mild steel confirming Fe-290 (Gde E-165) in door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including of steel, sheeting or other covering ) and hanging also fastening and fixing, complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type (size as approved by GE) complete all as specified and as directed. Note:- BOO will be consitituted to determine the weight of chain link.

Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails, straining bolts, etc including provision of binding wire, complete all as specified and as directed.

Supply only Mild steel round or square bars,in available length Fe-290(Gde-165) for fixing of chain link fencing, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer, complete all as specified and as directed.

Dismantling of old u/s water storage tank capacity 500 liters and removing to store / credit to contractor, complete all as per specified and directed by Engg-in-charge.

Dismantling of old u/s water storage tank capacity 1000 liters and removing to store / credit to contractor, complete all as per specified and directed by Engg-in-charge.

M&L rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball valves for 15mm bore pipe (minimum weight 195 gms), high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. Make:- Sintex / Rotex / Polytuf.

S&F in repairs of 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball valves for 20mm bore pipe (minimum weight 210 gms), high pressure of PTMT with epoxy coated aluminium rod and high density plastic ballcomplete all as per specified and as directed by Engg-in-charge. Make:- Sintex / Rotex / Polytuf.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Demolition of cement concrete of thickness n. exc 200 mm and in any position including removal of existing water proofing treatment of any description and bedding in any type of roof and removing rubbish to a distance exceeding 50 m but not exceeding 250 m, complete all as specified and as directed.

PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixing with liquid water proofing compound as per manufacturer instructions, as in roof padding/levelling layers , the surface of concrete is to be finished even and fair with out using extra cement, complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggreage), mixing with liquid water proofing compound as per manufacturer instructions, as in levelling courses of roof / chajja / kerbs,rounded or chamfered on edges including necessary form work, complete all as specified and directed. Note :- WPC will be measured and paid separately as supply only.

Plain cement concrete, 1:2:4 type B1 (using 20mm graded stone aggreage), as in coping to parapet walls or others, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M& L for carring out of water proofing treatment in roof in the following stages : (a)- M & L 10 mm thick sceeding in cement mortar 1:3 on brick work or concrete surfaces on roof surfaces mixed with WPC, surface finished even and smooth without using extra. (b)- Apply first coat of bitumen primer confirming to IS 3384-1986 @ 0.40Kg/Sqm. (c)- Second coat of bonding material using hot blown type bitumen confirming to IS- 702-1988 grade 85/25 @1.20 Kg/ Sqm (d) Third layer of 3 mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method. The side overlaps of minimum 75 mm and the end laps of minimum 100 mm. All overlaps & joints shall be sealed as per manufacturer's instructions. (e) Fourth coat of bonding material using hot blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm (f) Fifth and top most layer of surface finish 25mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding over APP membrane, the surface of concrete is to be finished even and smooth with using extra cement and proved V shaped groove 6mm wide & 10mm depth filled with mastic bitumen of (1:1) complete all as specified and directed by Engr-in-charge.

M&L for Rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

Demolition of wall and ceiling boards/PVC wall lining (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as directed.

GI frame work size of grid 605 x 605mm for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and inccluding ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including providing PVC sheet tiles, 60X60X5mm size ceiling fixed with screws as per manufacturers instructions over the frame work complete all as specified and as directed.

Demolition of reinforced cement concrete such as roof, floor slab, beams, stair case, landing, chajjas and similar suspended work, incld necessary scaffolding work and removing rubbish to out side MD land, complete all as specified and as directed.

Cleaning the existing reinforcement of slabs, chajjas etc & applying a coat of "SIKA RUSTOFF 11" to remove the loose rust particles etc throughly cleaning the surface, complete all as per specified and directed by Engg-in-charge.

Applying a coat of bond coat made with cemnet slurry (1part cement to 1.50-2.00 part water) mixed with admixture "LATEX POWER" mixed @ 5kg per 50 kg cement & applying to the conc surfaces @ 200 gm/sqm to obain tack complete all as per specified and directed by Engg-in-charge.

15-20 mm thick rendering in CM 1:1:2 using 1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with "SIKA PLASTOCRETE SUPER" admixture @ 100 gm / 50 kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as per specified & directed by Engg-in-charge.

10-15 mm thick rendering in CM 1:3 bond coat applied surfaces with cement mixed with "SIKA PLASTOCRETE SUPER" admixture @ 100 gm / 50 kg of cement & finishing the surface even & smooth complete all as per specified & directed by Engg-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.

Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering, complete all as specified & directed by Engineer-in-charge.

Rendering 15 mm thick in CM 1:6 on stone masonry surfaces ( internal wall surfces) finished even and smooth with out using extra cement, complete all as specified and as directed.

Rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth with out using extra cement using integral water proofing liquid as per manufracturer instruction, complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying with Birla/JK wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint incld & over one coat of primer complete all as specified and as directed.

Demolition of cement concrete (un reinforced) as in flooring, plinth protection and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris to out side MD land complete all as specified and as directed.

Machine cut Jaiselmer Yellow stone slab 18 to 20 mm thick, laid in floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Machine cut Udaipur green stone slab 15 to 18 mm thick, laid in floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Machine cut Jaiselmer Yellow stone slab 18 to 20 mm thick, as in riser, skirtig & other verticle surfaces and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 10 mm thick screed bed in CM 1:3 complete all as specified and as directed.

Non skid ceramic tiles (premium quality), coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4, complete all as specified and as directed. Make :- Somani / Kajaria / Orient bell

Double charged vitrified ceramic tiles 9-10 mm thick (square / rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed. Make :- Somani / Kajaria / Orient bell

Double charged vitrified ceramic tiles 9-10 mm thick (square / rectangular) polished, dark shade, area of each tile not exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed. Make :- Somani / Kajaria / Orient bell

75mm thick Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate), as in plinth protection including necessary form work laid in alternate bays and filling the joints with bitumen mastic filler, complete all as specified and directed.

25mm thick (average) PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base , the surface of concrete is to be finished even & rough to receive tile flooring surface, with out using extra cement, complete all as specified and as directed.

Coloured glazed ceramic tiles (premium quality) of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed. Note:- The tiles shall be in one or more colour patterns incld highlighters all as per approved and directed by Engg-in-charge. Make :- Somani / Kajaria / Orient bell

Taking down old u/s sanitary fittings any bore / size like as, gate valve, bib tap, stop valve, shower rose, health faucet, & other etc, complete all as per specified and directed by Engg-in-charge.

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F CP brass bib cock with wall flange screwed for iron pipe or ferrule complete all as specified and as directed. Make: JAQUAR Cat No.QQT- 7037 or its equivalent model in Cera / Hindware / Johnson

S&F CP brass angular stop cock screwed for iron pipe or ferrule complete all as specified and as directed. Make: JAQUAR Model No.QQT- 7053 or its equivalent model in Cera / Hindware / Johnson

S&F CP overhead shower rose 150 x 150 mm of ABS body with grey face plate & with arm having swivel screwed for iron pipe or ferrule complete all as specified and as directed. Make: Jaquar / Cera / Hindware

S & F CP 15 mm bore health faucet with 8 mm dia, 1200 mm long flexible tube & wall hook screwed for iron pipe or ferrule complete all as specified and as directed. Make: JAQUAR Model No.ALD-573 or its equivalent model in Cera / Hindware / Johnson

S & F CP fancy type 15 mm bore two way bib cock screwed for iron pipe or ferrule omplete all as specified and as directed. Make: Jaquar / Cera / Hindware

Taking down old u/s sanitary fittings any materials / size like as, WHB, urinal, cistern, WC, & other etc. complete all as per specified and directed by Engg-in-charge.

Vitreous china ware wash hand basin (Ivory color), flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, including fancy type pillar taps, cast copper alloy capastan heads, CP screwed down high pressure, with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed. Make: Jaquar / Cera / Hindware

Vitreous china wash down water closet pan [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed. Make: Jaquar / Cera / Hindware

PVC valve less, syphonic action type, flushing cistern, low level, 10 ltrs capacity, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 600 mm long with PTMT nuts, color of cistern properly match with WC color, complete all as specified and as directed. Make: Cera / Hindware / Parryware

Taking down old u/s sanitary fittings any materials / size like as, corner glass shelf assambaly. complete all as per specified and directed by Engg-in-charge.

S&F 6mm thick corner sheet glass, 250mm size, as in shelf , fancy type, triangular in shape and one side circular complete all as specified and directed.

S&F 6mm thick corner sheet glass, 300mm size,as in shelf , fancy type, triangular in shape and one side circular complete all as specified and directed.

Rounding of the edges (moulding of double layer stone) of stone slabs as in cooking plateform treads of steps, shelves & cills complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed. Make:- Jaguar Cat no. 1111NM / cera

Dismantling of cast iron pipes of 100mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

Dismantling of cast iron pipes of 75mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

S&F 110 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls / laid in trenches / in floors, complete all as specified and as directed.

S&F 75 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls / laid in trenches / in floors complete all as specified and as directed.

S&F of PVC (SWR) 110 mm bore bends any radius with oval access, complete all as specified and as directed.

S&F of PVC (SWR) 75 mm bore bends any radius with oval access, complete all as specified and as directed.

S& F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S& F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F of PVC (SWR) 110 mm bore WC connector with lip ring, complete all as specified and as directed.

S&F PVC vent Cowl 75mm bore, complete all as specified and as directed.

S&F PVC floor trap, plain with CP grating including jointing with solvent cement for 75 mm bore pipes, complete all as specified and as directed.

S&F PVC gully trap, plain with CP grating including jointing with solvent cement for 125 mm size, complete all as specified and as directed.

S& F in repairs Decorative finials (round type with mirror optic finish) trade pattern for decorative type curtain rods as per sample, of 22 to 25 mm dia, including 8 nos PVC rings per running meter of curtain rod, complete all as specified and directed.

S& F in repairs stainless steel brackets for 25 dia CP stainless steel for curtain rod, complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutters), complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutters), complete all as specified and as directed.

Taking down steel windows and ventilators ( glazed / fly proof) of any description, complete all as specified and as directed.

M&L factory Made flush shutters, 40 mm thick solid core construction with block board core construction as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood with moisture content not less than 12% as per IS. incld 1 mm thick laminated commercial type on both side complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood factory made plain, framed, plain gauged shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed .

S&F butt hinge of size 100mm , medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

Fabrication of pre powder coated aluminum frame work as in window frame with or without rebate or for sliding windows (two / three track), ventilators etc with louvers having suitable mechnasim for tilting, U shaped fillets for securing Jallies etc with & the likes complete all as per sample kept in GE office & fixed in position, complete all as directed and specified. Note:- Glass panes in louvers & SS wire cloth shall be measured and paid under respective item of BOQ.

Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of window & ventilators, complete all as directed and specified.

Pre powder coated aluminium window shutters prepared fo slidig or hanging etc incld handles, tower bolt and hinges complete using section having wt not exc 0.50 kg/ RM, complete all as per directed and specified.

S&F 4.80mm thick sheet glass tinted, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane with glazing pin, complete all as specified and as directed.

S&F 4.00 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to Al door/window, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed .

Steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS:1161-1979 Grade St-240, complete all as specified and as directed.

Prepainted Galvalume aluminium zinc coating GI based corrugated steel Sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Taking out from position framed wood work as in cupboard / cabinets etc with all fittings, shutters, sevels, drawers etc, for overall sizes exc 0.50 sqm but n. exc 1.50 Sqm & depth n exc 60 cm, in any position fixed in wallls or floors & removal of the rubbish outside MD land complete all as specified and as directed.

PVC sheet frame of width 150 mm & 18 mm thickness made out extruded of 18 mm thick PVC sheet and joined with suitable cement solvent adhesive and screw. The frame shall be fixed to the wall using 75 mm long MS screws through the frame by using PVC fasterners. A min of 3 nos of screws to be provided for each verticle member & minimum 2 nos for horizontal member etc, complete all as per manufacturers specifications and as directed.

18 mm thick solid PVC sheet UPVC coated celuka printed in one of two different colours (with wood grain printed pattern / Ivoy color finish) as in kitchen cabinet shutters, all round body of cabinets, shelves, drawers, etc cut to required size jointed with solvent cement & steel screws etc, complete all as specified and as directed.

S&F '0' degree clip type self closing hinges for cabinets fixed with cadmium coated screws all as per sample.

S&F 100 mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters, complete all as specified and as directed. Make:- Hettich

Demolition of stone slabs laid bedded & jointed & pointed in CM of any description of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land, complete all as directed.

75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), as in sub base of floor, complete all as specified and as directed.

Machine pressed precast conctete interlocking paver block, rubberised finish any shape and size confirming to IS 15658-2006, M-35 Grade, with grey cement and pigments (approved sample kept in GE's office), complete all as specified and as directed.

Precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerb stone blocks of approved size and setting in cement mortar 1:4, complete all as specified and as directed .

Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land, complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to square rubble walling un-coursed or brought up to courses, complete all as specified & as directed by Engineer-in-charge.

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & as directed by Engineer-in-charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 10 cm but not exceeding 20 cm girth complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide & not exceeding 1.5m in deep for foundation etc and not exceeding 1.50m deep for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and as directed.

Spreading and levelling in layers not exceeding 25cm thick, well ramming including watering as required as in under floors complete all as specified and as directed.

Removing of excavated material to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed.

40mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including mixing with WPC and necessary form work, complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately under respective item.

M&L hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

S&F Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25 to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 including dismantling of stone slabs of any description and in any position, complete all as specified and as directed.

Rendering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed.

M&L for keyed pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces, complete all as specified and as directed.

Pre-cast cement concrete block masonry using PCC, 1:3:6, type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, complete all as specified and as directed.

Roughly squared stone lintels hammer dressed on face and soffits,hoisted, set and pointed in cement mortar 1:6, complete.n exc 3m in length complete all as specified and as directed .

S&F 150mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F Factory made steel window / ventilators with top hung shutters including box type hinges, steel peg stay, complete all as specified and as directed.

Supply & fabrication of mild steel guards and welded to window frames complete all as per specified and directed.

S&F 3.00mm thick sheet glass tinted, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane with glazing pin, complete all as specified and as directed.

S & F in repairs white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed. Make: Cera / Hindware / Parryware

S&F, fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F 100 mm bore CI Tee ordinary or inverted, complete all as specified and as directed.

M&L 100mm dia Cast iron floor trap, plain with grating including jointing with solvent cement, complete all as specified & as directed.

S&F SGSW gully trap, plain square or rounded for 180x 150 mm size, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S & F cast iron vent cowls suitable for 100mm dia pipes, complete all as specified and as directed.

S&F CP grating including jointing with solvent cement for 100 mm size, complete all as specified and as directed.

S&F 100 mm CI bends with duck's foot or heel rest, complete all as specified and as directed.

M&L rendering 10 mm thick in CM 1:3, on concrete masonry wall surfaces, finished even and fair without using extra cement, complete all as specified and directed.

500 ltrs capacity rotational moulded polythene water storage tanks (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as per specified and as directed. Make:- Sintex (pure) / Rotex / Polytuf.

30mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate), as in roof finished the surface, including mixing with WPC and necessary form work complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately under respective item.

M&L of Precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole cover including chamfers weathering set in cement motar 1:4 and joints to match with CM 1:3 and all complete all as specified and as directed.

TMT steel bars of 6 mm to 8 mm dia bars as in reinforcement, stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe complee all as specified and as directed .

S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 100 mm dia of pipe complete all as directed.

M&L for connecting 20 mm bore GI pipe from existing water supply line including necessary excavation, clamping making holes to existing pipe line.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch, complete all as specified and directed .

All as per Serial Item No. 161 above but one 3/5 pin socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per Serial Item No.161 above but for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches, complete all as specified and as directed.

All as per Serial Item No.163 above but cable size 2.50 sqmm for 3 / 5 Pin & 6/16 Amp

All as per serial Item No.161 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire, complete all as specified and directed .

S&F Modular switch single pole 1way, 6 Amps 1 Module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular switch single pole 1way, 16 Amps 1 Module, complete all as specified and directed Make: Legrand / L&T / Schneider

S&F Modular socket, 6 amps 2/3 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular socket, 6/16 amps 2/3/6 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F lamp Holder, insulated body with back plate, 230 Volts for batten fittings, complete all as specified and as directed. Make: Legrand / L&T / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.

Fixing only integrated LED channel tube light fitting, 1X20W, 230V, energy efficient box type, integral, sleek polycarbonate with white acrylic cover epoxy powder coated with fluorscent tube light 1X20W complete with all accesories internally pre wired and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Note :- Material shall be issued under Sch 'B'

Fixing only integrated LED channel tube light fitting, 1X10W, 230V, energy efficient box type, integral, sleek polycarbonate with white acrylic cover epoxy powder coated with fluorscent tube light 1X10W complete with all accesories internally pre wired and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Note :- Material shall be issued under Sch 'B'

S&F LED light fitting 1X10W bulk head luminaries, 6000K, with lamp holders with all accesories internally and connectiong up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed. Make:- Havells cat part No LHEXCGP7IN5W013 or its equivalent in CG / Phillips / Wipro

Supply, Fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 35 watt 5700K, fixed on pole, incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable including taking down unserviceable light fitting complete all as per specified and directed by Engg-in-charge. Make : Havells cat part No :-ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or its equivalent in Bajaj / CG

M&L Recess mounted 36W LED panel light (2' x 2') cool white , white powder coated CRCA sheet steel housing with high power LED's mounted, seamless front frame with flat white high transmission acrylic cover with all accessories and prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down unserviceable light fitting complete all as specified and as directed. Make :- Havells model No. LHEWDRT7PL1W036 or techno commercially equivalent make in Bajaj / CG / Philips .

Making openings for exhaust fan ventilating fan in stone wall and making good by Plastering / rendering etc around the wall openings complete all as per specified and as directed.

S&F, Exhaust fan of 200 mm sweep, BEE 5 star rated, with louvers made of heavy duty metal body complete with bracket frame and making necessary electric connection complete all as specified and as directed . Make:-Bajaj / Havells / CG.

S&F, Exhaust fan of 300 mm sweep, BEE 5 star rated, with louvers made of heavy duty metal body complete with bracket frame and making necessary electric connection complete all as specified and as directed . Make:-Bajaj / Havells / CG.

S&F, Wall mounted fan of 400 mm sweep, BEE 5 star rated, with louvers made of heavy duty metal body complete with bracket frame and making necessary electric connection complete all as specified and as directed . Make:-Bajaj / Havells / CG.

S&F Single pole and neutral sheet metal enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps complete all as specified and as directed. Make:- Legrand cat part no. 507811 or its equivalent make of / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's, IP-43 protection, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 12 way, 240V for fixing MCB's, IP-43 protection, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's, IP-43 protection, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SPN ‘C’ Curve 10KA, 63 amps, 415 V complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 63 amps, 240 V complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F Verticle distribution board in double door with 300A rated bus bar,TPN 4 way, 415V, IP-43 protection, suitable for 4 Pole MCCB's 100 A, IP protection 43 & 9 , dust and vermin proof, complete all as specified and as directed. Make:- Havells cat part No. DHDLVSRWGOFO04 or its equivalent of Legrand / Havells / L&T / ABB

Supply and fixing 4 Pole MCCB 160 Amps 32 KA, thermal adjustable magnetic type, Ics=75% including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete. Make:- Legrand / Havells / L&T / ABB

M&L in repairs submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories fixed & concealing on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel including dismentling of existing earth pit etc complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

Supply, Fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 45 watt, fixed on pole incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable Make : Havells Cat Part No LHETAXU7PN6J045 or techno commercially equivalent model of make Bajaj/Philips/CG

S&F Prewired factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's, IP-43 protection, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 40 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

Fixing only laying, jointing, testing and commissioning 1100 volt grade heavy duty, insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 2 core 10 sqmm complete all as specified and directed Note:- Material shall be issued under Sch 'B'

S&F, Exhaust fan of 300 mm sweep with louvers made of study engineering plastic body complete with bracket frame and making necessary electric connection complete all as specified and as directed . Make : - Bajaj / Havells

Note for all above items:- 1. All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs i.e. incld taking down old items" unless optherwise specifically mentioned as "Suppply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly. 2. The contract amount shall be arrived at after deducting amount of "Schedule of Credit" from the Total quoted amount.

BEYLIM INFRA

Rajesh Enterprises

Amresh Traders

M/S KAUTILYA GARG

PREM TRADERS

M/S SHARMA ASSOCIATES