GE/SMB/T-13/2022-23 COMPREHENSIVE MAINT BUILDING WORKS IN OFFRS MD ACCN IN ZONE II AND III AT MIL STN SAMBA

Amount

Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed . NOTE- Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessary scaffolding required as per site conditions & no extra payment shall be made on this account.

Rendering 15 mm thick cement plaster in cement mortar 1:4 on on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed.

Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed.

Rendering 5 mm thick on concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement , complete all as specified and directed .

Demolition of cement concrete (unreinforced) of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.

Rendering 15 mm thick in CM 1:3 on concrete surfaces and mix with WPC compound and finished even and smooth using neeru finish to plastering as specified in sunken slab , complete all as specified and as directed. Note: WPC shall be measured and paid for separately

Cleaning of dust removal to all loose existing sunken floor any material manually and with heat tark gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make as approved by GE cold applied.Bituminous mortar and cold emulsion cum water proofing liquid of Shalikote-T-10 or equivalent make as approved by GE, created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make as approved by GE mixed with portable water in the ratio of 1:1 and apply @ 400gm per Sqm (as per surface condition). Apply first coat of Tarfelt LM or equivalent make as approved by GE having alongwith 200% conforming to ASTM-C-412 & having crack bridging of 8mm conforming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no diluation water on primed surface while the surface is still tacky with consumption of 700gm /Sqm. Lay Geotex of 45 GSM/fiber mesh simultaneously and paste it properly with overlap of 50mm.

Discription count down as per srl item no 7.00 Allowed of first coat to dry for 10 to 12 hrs. Apply 2nd coat on cured first coat with consumption @ 700gm/Sqm in opposite direction of 1st coat by brush or roller. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm/Sqm. Ensure final curing time of 36 hrs before allowing/carrying out any further work. Conduct ponding test after minimum 7 days applying 2 coats of U V Resistand Elastomeric Exterior Axcrylic weather resistant water proof coating of Shalicryl - 215 or eauivalent make as approved by GE having elongation of 300% after curing of 14 days conforming to ASTM D-6083, for U V protection of bituminous Elastomeric Acrylic emulsified liquid membrance of Tarfelt LM or equivalent make as approved by GE to give long life and prevent its deterioration from sunlight. Note : Application of water proofing treatment will be done by authorised applicator only.

Plain Cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken filling and mass concrete, complete all as specified and directed

Supply only of liquid water proofing compound ISI marked complete all as specified and directed

G.I. Tubing 40 mm dia heavy grade galvanised laid over floors as a spout pipe in sunken floors, complete all as specified and directed.

Taking down cement plaster from chajjas or facias etc, incl. dismantling of damage conerete & repair the same with PCC 1:2:4 type B-0 (using 12.5mm crushed stone aggregate) on chajjas of any width and applying 10mm thick cement plaster in CM 1:3 mixed with water proofing compound, finished even & smooth using extra cement, complete all as specified and as directed. Noe- Rate quoted shall be deemed to include for scaffolding/formwork for single/double storey building of height 8.0 mtr and making good the disturbed surfaces.(Water proofing compound shall be measured & paid separately)

Demolition of reinforced cement concrete of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.

RCC M-15 (Nominal mix) 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roof slab, landing, balconies, canopies, deck slabs, shelves and the like etc complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed.

Formwork to edges of concrete flates etc exc. 10 cm but not exc. 20 cm wide fair finished, complete all as specified and directed.

Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Preparing existing surface of floor and brushing neat cement slurry with 3.0 kg of cement per sqm (b) Rendering 15mm thick in Cement mortar (1:4) on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (c) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (d) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface.

Cound down description as per srl item no. 18.00 (e) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slope from lowest line of sloping roof towards ridge. (f) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed by Engr-In-Charge. (iii) Water proofing compound shall be measured and paid for separately.

PCC 1:2:4 type B-0(using 12.5 mm graded stone crushed aggregate) as in roof padding coping, bed blocks etc complete all as specified and directed.

40 mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar 1:3 mixed with WPC over and including 15 mm thick screed bed in CM 1:4,complete all as specified and directed. (WPC shall be measured and paid separetly)

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed .

Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed .

Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks,complete all as specified and as directed.

Brick work with sub class 'B' burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed .

PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks etc complete all as specified and directed.

Rotational moulded polye- thylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I & including dismantling old unserviceable tank, complete all as specified and as directed.

Rotational moulded polye- thylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I & including dismantling old unserviceable tank, complete all as specified and as directed.

Disconnecting existing tanks, cap exc 250 ltr and not exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed.

Disconnecting existing tanks, cap exc 500 ltr and not exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed.

Cleaning and removing all scale and dirt etc, from water tanks exc. 250 and n.exc. 500 ltr capacity in any position and from mouths of circulating pipes etc and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also obtaining completion from user ,complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from water tanks exc. 500 and n.exc. 1000 ltr capacity in any position and from mouths of circulating pipes etc and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also obtaining completion from user ,complete all as specified and directed.

Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 15 mm bore pipe including making connections, fixed in repair, complete all as specified and directed.

Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm bore pipe including making connections, fixed in repair, complete all as specified and directed.

Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 25 mm bore pipe including making connections, fixed in repair, complete all as specified and directed.

20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair minimum weight 20 mm size-210 gms),complete all as specified and as directed.

20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair minimum weight 25 mm size-455 gms),complete all as specified and as directed.

PVC water tank covers required for 500 ltr to 1000 ltr capacity, complete all as specified and directed.

Taking down GI pipe 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

Taking down GI pipe 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

Taking down GI pipe 25 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

G.I. pipe 15 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed

G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed

G.I. pipe 25 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed

20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot & cold water supply including all plain CPVC SDR-11 fittings & brass threaded fittings on walls/ceiling or laying in floors including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed.

25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot & cold water supply including all plain CPVC SDR-11 fittings & brass threaded fittings on walls/ceiling or laying in floors including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed.

Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed.

Repair to existing PVC pipe/CI pipe including making the joints water tight by using suitable material including cleaning if required and refixing of any dia, complete all as specified and directed. Note - Work to be carried out up to 2nd storey building in any condition of working place / area.

Sealing of WC/floor traps joint and joints between rain water pipe and roof by using neat white cement paste or leak proof material and making the joint leak proof in case seepage is observed from WC/floor trap and joint of rain water pipe and roof slab, complete all as specified and directed.

Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.

Non-skid digital Coloured ceramic joint less tiles (1st quality) 7 to 8 mm thick(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:4, complete all as specified and directed

Non-skid digital Coloured ceramic joint less tiles (1st quality) 7 to 8 mm thick(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces dado/skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screwed bed of 10 mm thick in CM 1:4, complete all as specified and directed

Glazed coloured digital ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x300x7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .

Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed

Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall 10 mm thick in CM 1:4, complete all as specified and directed

Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed

Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall 10 mm thick screed bed in CM 1:4, complete all as specified and directed

Taking down shutter of any description not exc. 1.0 sqm each and removing to store.complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)

Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .

Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .

2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .

2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .

Flush shutters 30 mm thick solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.

Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with partical board core with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & back face to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification and drawings.

Double shutter Box type steel windows comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.

Double shutter Box type steel ventilators comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel ventilators will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.

Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc, of Fe-290-W (Grade-E-165) complete all as specified and as directed.

Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete all as specified and directed.

Anodised aluminium deco grills, 6mm dia mesh size 75x75mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified and directed.

Repairs to steel window, ventilators of any size to make it functional (including slot pin, hinge, hook and eye of standard quality where required), resecuring of windows wire gauge and railings/grills by using welding equipments, complete all as specified and directed.

Repair/ easing of wooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc complete all as specified and directed.

Repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable , complete all as specified and directed..

Replacing Aluminium door locks hydrolic door closer for door minimum weight not less than 6.0 kg ( Sample approved by Engr-in-charge) Make - Godrej/Link or equivelent.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.

Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufactuer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

Plain basket of size 17"x20"x4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 M 17204 or equivalent make Godrej, Harrison.

Cup and saucer of size 17"X20"X4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 S 17204 or equivalent make Godrej, Harrison.

Thali of size 17"X20"X8" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 T 17208 or equivalent make Godrej, Harrison.

Vegetable basket of size 17"X20"X6" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 V 17206 or equivalent make Godrej, Harrison.

Cutlery wire/cutlery perforated of size 17"X24"4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 C 17244 or equivalent make Godrej, Harrison.

Box Cutlery of size 17"X20"X4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 BC 17204 or equivalent make Godrej, Harrison.

Grain trolley of size 17"X20"X12" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 G 172012 or equivalent make Godrej, Harrison.

Bottle pull out 3 shelf of size 6"X20"X 21" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 PO 62021 or equivalent make Godrej, Harrison.

Carrousel (3/4 round) of size as per md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 CRL 24 or equivalent make Godrej, Harrison.

Partion basket of size 17"X20"X8" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 PT 17208 or equivalent make Godrej, Harrison.

Bottle basket of size 15"X20"X6" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich or equivalent make Godrej, Harrison.

Magnet catcher for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej, Harrison or equivalent make.

Steel fancy handle 150 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Steel fancy handle 200 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or eequivalent make.

Steel fancy handle 250 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Steel fancy handle 300 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Corner crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Sliding channel with all assories for cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.

Dismantling wall panelling including any type of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed .

Factory made 5mm thick PVC of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 5mm thick PVC sheet paneling for back side (wall side) and also manufacurer's test report and test certificate is mandotary with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 Type B-1 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately. complete all as specified and directed.

Prelaminated MDF board 19 mm thick as in shutters/shelves(exteriorgrade), prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed .

Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar, complete all as specified and as directed .

16 to 18 mm thick green udaipur marble in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed bed CM 1:4, complete all as specified and as directed .

16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed bed CM 1:4, complete all as specified and as directed .

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed .

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.complete all as specified and as directed .

3.5 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding)

3.5 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron /Steel /Wood /Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

Securing glass of any description in existing wooden and iron frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work ,complete all as specified and as directed . ( New length of frame reputtied shall be measured.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and as directed .

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.complete all as specified and as directed .

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples fixed in repair,complete all as specified and as directed .

100mm size Stainless steel handle complete all as specified and as directed.

Ball rolling sliding channels of size 450mm length fixed in cupboards with screws as in drawers, complete all as specified and as directed .

Auto hinges of size 150mm length fixed in cupboards with screws for holding stainless steel baskets as in drawers, complete all as specified and as directed .

Self adhesive tape of 18/19mm width , hot pressed & pasted on sides & bottom of edges of cupboards shutters, complete all as specified and as directed .

Steel fasteners of size 75mm long drilled and fixed to walls, complete all as specified and as directed .

50 mm dia and 75mm long steel supports fixed with bolt at bottom of cupboards box ,complete all as specified and as directed .

Continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electro galvanised suitable for 19mm thick shutter and fixed in repair, complete all as specified. ( ISI Marked)

Stainless steel medium weight Butt hinges, 100mm , complete all as specified and as directed

Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed

Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified and as directed

Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified.

Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Hasp & staple safety type aluminium anodised with mild steel hinges spin including bolt to hinges plate fixed with screws of 75 mm in length.complete all as specified and as directed

Aluminium hanging floor door stopper,twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed

50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as directed

Aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door fixed in repair, complete all as specified and as directed

Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work, fixed in repair, complete all as specified and as directed

Aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 700mm in width and of weight not more than 35kg and fixed in repair.complete all as specified and as directed

Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed in repair, complete all as specified and as directed.

Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm fixed in repair, complete with all accessories all as specified. Make:- Links Locks/ Godrej

5 mm thick sheet glass ordinary quality coloured/tinted and glazed in squares, n.exceeding 0.5 Sqm in each pane.complete all as specified and as directed.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed

UPVC (SWR) 'B' type pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) 'B' type pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) 'B' type pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR) 'B' type pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed.

UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) , reducers 110 mm dia complete all as specified.

UPVC (SWR) vent cowl 75 mm dia complete all as specified.

UPVC (SWR) floor trap plain with grating having dia of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repair, complete all as specified and directed.

UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed in repair, complete all as specified.

25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windowsIncluding necessary fittings, fixed in repair,complete all specified and directed.

Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available , fixed in repair,complete all as specified and as directed. . Make :- Jaquar, Cat no CQT-23167B or equivalent model in Cera/hindware

Wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated,fixed in repair, complete all as specified Make :Jaquar, Cat No-CQT-23219 or equivalent model in Cera/Hindware.

Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) , fixed in repair,complete all as specified. Make:- Jaquar, Cat No:- CQT-23281UPR or equivalent model in Cera/ Hindware.

Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, fixed in repair, complete all as specified. Make :- Jaquar, Cat No- HSH1731 or equivalent model in Cera/ Hindware.

Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges, fixed in repair, complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent model in Cera/Hindware.

Sink Cock with swinging casted spout (Wall Mounted model) with wall flange, fixed in repair, complete all as specified Make:- Jaquar, Cat No-CQT-23347 or equivalent model in Cera/Hindware

Bib Cock with wall flange cast copper alloy, chromium plated fancy type, fixed in repair ,complete all as specified. Make :-Jaquar, Cat No:-SQT-23047 or equivalent model in Cera/hindware.

2 way CP Bib Cock with wall flange, cast copper alloy, chromium plated fancy type, sutable for 15 mm GI pipe, fixed in repair,, complete all as specified. Make :- Jaquar, Cat No:- CQT-23041 or equivalent model in kohler/ Artize.

Angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe,fixed in repair, complete all as specified. Make:-Jaquar, Cat No- CQT-23059 or equivalent model in Cera/Hindware

Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069), fixed in repair, complete all as specified. Make:- Jaquar, Cat No:-CQT-23069K or equivalent model in kohler/ Artize.

15mm bore CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified. Make:- Jainko ,Essco, Parko

15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, fixed in repair,complete all as specified. Make:- Jainko,Essco, Parko.

15mm bore Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified. Make:- Jainko,Essco, Parko.

15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified. Make:- Jainko,Essco, Parko

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position and repair, complete all as specified. Make: Essco/Jaiko

Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified. Make:- Jainko,Essco,Parko, Prayag

Chromium plated, towel ring , complete all as specified. Make:- Jainko,Essco

Chromium plated towel rack 600mm long without lower hangers,Stainless steel ,fixed in repair,complete all as specified. Make :- Jaquar Cat No- AKP-35781PFS or equivalent model in Cera/hindware.

Stainless steel Shop dish holder, fixed in repair, complete all as specified. Make:- Jainko/Essco

Toilet paper holder with flat recessed type stainless steel ,fixed in repair,Complete all as specified and directed. Make :- Jainko,Essco,Parko, Prayag

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair . Complete all as specified. Make :- Jainko,Essco,Parko, Prayag

Corner Glass Shelf (with Bracket) , fixed in repair as per directed by Engr-in-charge. Make:- Jainko/Essc/Parko

Waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin, fixed in repair, complete all as specified . Make :- Jainko,Essco,Parko, Prayag

Waste coupling of chromium plated brass 40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin,fixed in repaira, complete all as specified . Make :- Jainko,Essco,Parko, Prayag.

PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, fixed in repaira. Make :- Jainko,Essco,Parko, Prayag

PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, fixed in repair. Make :- Jainko,Essco,Parko, Prayag

Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repair. Make :- Jainko,Essco,Parko, Prayag

Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm, fixed in repair, complete all as specified. Make :- Cera, Cat No- S1013105 or equivalent model in Hindware/Jaquar.

Under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CP Waste Coupling and PVC waste pipe,fixed in repair, complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent model in Jaquar/ Hindware.

Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass, fixed in repair, complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent model in Jaquar/ Hindware.

Full pedestal for WHB fixed in repair, complete all as specified. Make :- Cera, Cat No- S2090113 or equivalent model in Jaquar/ Hindware.

PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010109 ( CONGO) or equivalent model in Jaquar/ Hindware.

PVC Seat cover for EWC pan (White ) of standard quality including hinges bolt etc fixed in repair, complete all as specified and directed . Make: CERA Cat No- B1510121 or equivalent model in Jaquar/ Hindware.

Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,fixed in repair, complete all as specified and directed . Make:- Cera, Cat Part No- S1053101 or equivalent model in Jaquar/ Hindware.

WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe(Rate of including in taking out and removal of old WC seat unhygienic condition),fixed in repair, complete all as specified and directed . Make:- Cera, Cat Part No-S3010102 (CALINA) or equivalent model in Jaquar/ Hindware.

PVC Waste pipe 32mm bore of required length ,fixed in repair, complete all as specified and directed . Make: Prayag Cat No 329 or equivalent model in Polytuf/ Jindal.

PVC Waste pipe 40mm bore of required length complete for sink/WHB,fixed in repair, complete all as specified and directed . Make: Prayag Cat No-330 or equivalent model in Polytuf/ Jindal.

Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe ,fixed in repair, complete all as specified and directed . Make: Jainko, Model No- SSJ-1. & equivalent model in Prayag,Nirali, Jayana.

Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Jainko Model No .-SSJ-8. & equivalent model in Prayag, Nirali, Jayana.

Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete. Make:- Jainko, Model No.KRJ-4. and equivalent model in Prayag, Nirali, Jayana.

Brass face for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, etc for 15 mm bore pipe ,fixed in repair, complete all as specified and directed .

PVC Knob or flushing handle for flushing cistern of capacity 10.0 litres , fixed in repair, complete all as specified and directed . (Sample as approved & kept in GE's sample room)

PVC float valve suitable for flushing cistern of capacity 10.0 litres fixed in repair, complete all as specified and directed . (Sample as approved & kept in GE's sample room).

PVC syphonic kit for flushing cistern of capacity 10.0 litres,fixed in repair, complete all as specified and directed . (Sample as approved & kept in GE's sample room)

PVC bend suitable for flushing cistern of capacity 10.0 litres, fixed in repair, complete all as specified and directed . (Sample as approved & kept in GE's sample room).

PVC syphon washer suitable for flushing cistern of capacity 10.0 litres fixed in repair, complete all as specified and directed . (Sample as approved & kept in GE's sample room)

Stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement, fixed in repair, complete all as specified and directed . Make:- Jainko, Essco, Parko.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.

Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over and including a coat of wall care putty and applying a coat of primer complete all as specified.

Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed by Engr-in-charge.

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto four storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling, complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

Preparation of old decorated surfaces including brooming down with steel wire scrapping down smoke soot moulds moss and efflorencet salts and trading oil and grasy spots etc. and applying one coat oil bound distemper on ceiling complete all as specified.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of interior emulsion including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of interior emulsion over and including one coat of primer over two coats of Birla wall care putty on plastered surfaces, preparatory to distempering. complete all as specified and as directed by Engineer-in-charge.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornices etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.

Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion (APEX) making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.

Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed

Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed

Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying textured painting on wall, preparatory to texured painting. complete all as specified and as directed.

Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified .

50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks over and including sand bedding layer 25mm thick through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed .

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.