SPECIAL REPAIRS TO KG SCHOOL AT INA EZHIMALA

Amount

Dismantling single layer of Mangalore pattern tiles in roofing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)/ removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting / galvalum sheets, any gauge, thickness as in roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

Dismantling cabinets boarding, any description, fixed in any position with screws complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down of cement plaster of any description or thickness/ chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating with liquid water proofing compound, surface finished even and fair, complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface for laying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) by forced application complete all as specified and as directed.

M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F transparent polycarbonate roofing sheet 5 mm thick fixed to steel frame work using self tapping screws etc complete all as specified and as directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening all as per manufacturers specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per manufacturers specification & drawing with particle board core complete all as specified and as directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete all as specified and as directed.

M&L for filling concrete inside frame in PCC 1:3:6, type C-0 complete all as specified and as directed.

S&F 30 mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs aluminum (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and as directed.

S&F in repairs floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door complete all as specified and as directed.

S&F in repairs 150 mm extruded anodised aluminium alloy handles fabricated type complete all as specified and as directed.

S&F in repairs 150 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs 200 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm butt hinges cast brass, with stainless steel hinge pin, bright polished and fixed type B-11 complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 300mm complete all as specified and as directed.

S&F aluminium powder coated frame for partitions, doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated door shutter, side hung type aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

M&L for aluminium powder coated windows and ventilator shutters etc. side hung type without sash bars,aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F in repair 9mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.

M&L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed. (Note:- Aluminium beading shall be measured and paid separately)

S&F Powder coated (thickness not less than 50 micron) aluminium grill 8mm thick of approved design aperture size 50X50mm of standard section including 'F' type aluminium snap beading, screw complete fitted to aluminium frame section complete all as specified and as directed. (Note:- Aluminum frame shall be measured and paid separately.)

S&F in repair 18/19mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.

M&L for coloured Non-skid joint free ceramic tiles (square/ rectangular) Non - skid Ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 350x250x7mm / 450x350x 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous China wash basin (flat back) 500x450mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F Vitreous china squatting pan "Orissa pattern size 630x450 white with integral foot rest (excluding flushing cistern and flush ipe ) Make Cera or equivalent fixed in repair complete all as specified and as directed.

S&F plastic seat cover in repair (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair vitreous China Urinal, half stall type, coloured, with and including all fixing acessories complete all as specified and as directed.

S&F in repair vitreous China Urinal partition, coloured, with and including all fixing acessories complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F urinal spreader of brass chromium plated and flush cock (lever type) 25mm of Cat Part No. KBEA -32 of Prayag or equivalent in Cera/Parryware/Jaquar complete all as specified and as directed.

S&F in repair brass chromium plated towel ring complete all as specified and as directed.

S&F in repair 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail, complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated toilet paper holder, complete all as specified and as directed.

S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and as directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB /sink complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair Cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections, 25/32 mm dia complete all as specified and as directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Dismantling CI soil waste pipe 100mm/75 mm dia including all joints and branch pieces jointed in cement mortar complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 100 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 75mm complete all as specified and as directed.

S&F PVC (SWR) bends of any radius bore 75mm complete all as specified and as directed.

S&F PVC (SWR) bends of any radius bore 110mm complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal of bore 75mm complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal of bore 110mm complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in gola junction of wall and floor or for settings floor trap/ ‘P’ trap in position and PCC padding in floor complete(Work in foul condition as in shaft) complete all as specified and as directed.

M&L for cutting out cracks to V-section in existing roofs/terracing /walls, cleaning out, wetting, grouting with cement and sand slurry 1:3 including water proofing compound with Staging to work in high altitude etc. complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair, complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Supply only intergral waterproofing compund complete all as specified and as directed.

M&L for rendering on fair faces of brick work or concrete surfaces 10mm thick in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering on fair faces of brick work or concrete surfaces 10 mm thick in CM 1:3 in celing finished even and smooth without using extra cement complete all as specified and as directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605mm complete all as specified and as directed.

M&L for 4mm thick non-asbestos fiber cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2,100 mm thick for plinth protection and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound - Grade 'B' complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 1000 litres complete all as specified and as directed.

Repairs to expansion joint with following specifications :- (a) Demolition and removal of masonry (stone / brick) over the expansion joints and necessary chipping with machine, electrical chipper tools and removing debris from site, location as directed by Engineer-in-Charge. (b) Open expansion joint by chipping loose portions, surface and straightening the edges of the expansion joint using FOSROC Renderoc-S2 or equivalent make of Pidilite, SIKA, STC, two part structural grade reinstatement mortar or equivalent including preparation of surface complete all as per manufacturer's instructions. (c) After strengthening the edges of expansion joint, expansion joint shall be filled with Hydrocel XL or equivalent make of Pidilite, SIKA, STC, @155 mm thick material, and then polythelene backer rod 30mm dia is to be fixed in expansion joint and the balance gap to be filled with concrete of size 40mm X 20mm with FOSROC Thioflex 600 two part polysulphide sealant or equivalent material. (d) Providing and fixing Expoband a hypalon membrane system which is designed to be bonded over movement joints in structures to prevent the passage of water. The Hypalon membrane is bonded in position using Nitobond PC 40, two part epoxy adhesive or equivalent make of Pidilite, SIKA, STC, complete all as per manufacturer's instructions. (e) Providing and applying bituminous water based primer on the prepared surface and when the surface is tacky self adhesive SBS membranes by using FOSROC Proofex GP or equivalent make of Pidilite, SIKA, STC are installed and firmly pasted it on the existing membrane joints laid in dry condition with approximate 80mm overlap of edges complete.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation old wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint using UNIGLOSS deluxe multi surface paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint using UNIGLOSS deluxe multi surface paint complete all as specified and directed by Engineer-in-Charge.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including preperation of newly plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including preperation of old surfaces complete all as specified and as directed.

M&L for applying two coats of OBD emulsion over a coat of primer on newly plastered surface including preperation complete all as specified and as directed.

M&L for applying two coats of OBD emulsion over a coat of primer on old surface including preperation complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface complete all as specified and as directed.

M&L for colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit medium grade not less than 20mm dia including PVC/GI flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting 6 Amps switch and socket etc on independent board including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr in charge for the following:- Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iv) Size of copper earth wire must be equal to size of current carrying conductor upto size 16 sqmm.

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches

(c) 5 Amps socket point on independent board

All as per item No. 98 here in above but 2.5 sqmm for 15 Amps socket on independent board complete all as specified and as directed.

M&L for sub main wiring colour coded using 2 runs of 2.5 sq mm FRLS PVC insulated cupper conductor 1100 Volts grade conforming to IS specification drawn through PVC conduit along with 1 run of 2.5 sqmm PVC insulated copper conductor FRLS Cable as earth lead connected to common earth dolly complete all as specified, including taking down the unserviceable wiring. Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) 3 runs of 2.5 sqmm PVC insulated copper conductor and 1 run of PVC conduit not less than 20mm dia, medium grade will be measured as one unit. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for sub main wiring using 2 runs of 4 sq mm FRLS PVC insulated cupper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit along with 1 run of 4 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified, including takingdown the unserviceable wiring. Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) 3 runs of 4 sqmm PVC insulated copper conductor and 1 run of PVC conduit not less than 20mm dia medium grade will be measured as one unit. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

S&F ceiling rose 3 terminal 240V PVC/Poly carbonate insulated body complete all as specified and as directed.

S&F modular switch one way 6 Amps 1 module complete all as specified and as directed.

S&F modular socket 6 Amps 2/3 pin 2 module complete all as specified and as directed.

S&F modular switch one way 16 Amps 1 module complete all as specified and as directed.

S&F modular socket 16 Amps 2/3 pin 2 module complete all as specified and as directed.

Supply and fix MCB single pole AC 240 Volts, 6 to32 Amps complete all as specified and as directed.

Supply and fix MCB single pole & neutral, AC 240 Volts, 32 Amps complete all as specified and as directed.

Supply and fix MCB Triple pole & neutral, 40 Amps, 415 Volts AC complete all as specified and as directed.

Supply and fix RCBOs for earth leakage protection double pole 300 mA, 40 Amps complete all as specified and as directed.

Supply and fix single pole and neutral enclosure with two pin and plug and socket complete with and including one single pole MCB, AC 240 Volts, 20 Amps complete all as specified and as directed.

Supply and fix Condenser 2.5mfd, AC 230 Volts suitable for ceiling fan/exhaust fan complete all as specified and as directed.

Supply and fix fan regulator (Modular) electronic step up type 100/120 Watt AC 230 Volts complete all as specified and as directed.

Supply and fix in replacement surface and wall mounted 10 W 2 feet LED batten,out put lumen greater than 100 lumen/watts. extruded channel in thermally conductive material for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver,making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in -charge. Make:- Crompton Model TRIMLINE-LDL-10W-CDL or equivalent in Philips/Wipro/ Havells

S&F in replacement wall mounted 20 W 4 ft LED batten,out put lumen greater than 100 lumens/watt.extruded channel in thermally conductive material for efficient heat dissipation with Polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in charge. Make : Crompton TRIM LINE. LDL-20-CDL or equivalent in Philips/Wipro/Havells

Supply and fixing LED Down ligher fitting 18W, out put lumen greater than 100 lumen/watts with round shaped surface mounted , PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust luminaire Efficacy 100lm/w complete all as specified and as directed. Make:- Crompton Model PEARL NIOS-R-LCDSPLN-R-18-CDL or equivalent in Philips/Wipro/Havells

Supply and fixing LED Bulk head fitting 10W out put lumen greater than 100 watts with oval shaped surface mounted LED, PMMA diffuser,powder coated white finish housing, making connection from ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engr in charge. Make:- Crompton Model STUD- LBHP-10-CDL or equivalent in Philips/wipro/ Havells

Supply and fix surface mounted 18W luminer1x1 Tile, out put lumen greater than 100 lumen/watts.Glare free uniform illimination housing with opel diffuser with colour temp 600K s complete all as specified and as directed. Make:- Crompton Model PEARL NIOIII- S-LCTLSNE-18-FO-CDL equivalent in Philips/Wipro/Havells

Supply and fix 40W suspended achitectural LED Light fittings 4 feet length suitable for class rooms/commercial spaces complete all as specified and as directed. Make:- Havells Model Consta LED CONSTA 114LP 40W LED 857 PMMAWH or equivalent in Philips/Wipro/Crompton.

Supply and fix Post top lantern weather proof indirect lighting solution having improved horizontal uniformity, with reduced glare and improved lighting control complete all as specified and as directed. Make:- Crompton Model Terrain LPTC-40-CDL or equivalent in Philips/Havells/ Wipro.

M&L for cutting of holes in existing concrete block/stone wall including brick wok and plastering finishing 250 mm sweep exhaust fan complete all as specified and directed by Engineer-in-charge.

Supply and fixing ISI marked Exhaust fan with fixing arrangements of size 250mm sweep,single phase 230Voltage silent operation,rust proof body and bladesinbuilt louvers shutters for protection when not in use for 250 mm sweepexhaust fan and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5 sqmm from ceiling rose to connector of exhaust fan complete all as directed and as specified.

M&L for checking/replacing the worn out parts such as rubber pully, locking pin, nuts and washer of ceiling fan any size complete with one coat of synthetic enamel paint by spraying after cleaning all dust etc including taking down and refixing complete all as specified and directed by Engr-in-charge.

M&L for dismantling/opening the ceiling fan of 1200/1400 mm sweep of any make removing the old defective winding carefuly cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, warnishing, drying and reassembling including taking down and refixing complete all as specified and directed by Engr in charge.

M&L for dismantling ceiling fan in any size and sweep removing old bearing and bushes of any size supply and fixing new bearing suitable size of make SKF/ TATA/NBC and bushes including greasing and reassembling and testing, taking down and refixing all as directed by Engr in charge.

KDR CONSTRUCTION

SANDR

GMS Builders

RS ENTERPRISES

Gates Infra Construction Co