Providing Street lights to the approach road of godowns near Railway Marshalling Yard

Supply of 120W LED streetlight luminaire with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output rated life Burning Hrs. 5000hr @Lumen Maintenance of 70%,maximum light intensity should be between 60 degree to 70degree.CCT>5500k,IP66 optical and electrical compartment &impact resistance of complete luminaire>1K08. Power factor>0.9 with mains, Surge Protection -Min 5KV along with Over voltage /Overload/Short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79& LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location minimized minimal tools. LED Light fixture with 120W System power consumption. LED Efficiency>130 lm/w, nominal CRI>75.Luminaire manufacture should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified ISO 9001:2008.Housing with Supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 years against any manufacturing defect.

Supplying and fixing of class A GI Pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm pipe of 175mm length is fixed for fixing LED Street lights fitting of all capacities on rail/wall/RCC/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. a) Using 40mm dia G.I. Pipe

Digging of Pit 1.8 Mtr depth for erection of 9 Mtr Long STEEL/RCC/PSCC supports as per approved drawing. a) Hard Soil

Erection of RCC Pole of 9 Mtr long in a pit of 1.8 Mtr depth.

Shifting of 9 Mtr Long, 150 Kg WL released RCC Pole from Steel yard to work site by using crane and vehicle. (Approximate 1 Km)

Fixing and wiring of 120W LED Light fittings with suitable clamps brackets, lamps, bolts and nuts to 9 Mtrs long RCC poles.

Supplying heavy gauge PVC Conduit Pipe confirming to IS 2509 with suitable size bends, metal junction boxes adhesive paste etc. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC and enclosures. a) 25mm dia 2mm thick

Supply and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 volts as per IS-694:1990. a) 3C X 2.5 sq.mm

Supplying of 1.1KV, XLPE or Heat resistant PVC insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-1554(Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. a) 4C x 16 sq.mm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 4C x 16 sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 4CX16 Sqmm

Supply and Installation/Fixing/Provision of Pole box with HRC Fuse/MCB proviso and Suitable connector/terminal for 3 Ph/1 Ph connections with Loop-in and Loop-Out terminals for 10 sqmm/25sqmm 3.5 C Al/Cu cable and branch out 2.5 sqmm 2 core Al/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather proof), rust proof, dust proof, water proof having internally embedded gasket with provision for cable Entry through IP65 Thermoplastic, polyamide glands and/or grommets. a) 260mmx210mmx116mm

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, Indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10KA and complete wiring as required confirming to IEC 60898. a) 16A SP MCB

Supplying and fixing with wiring of Street light Timer box of size 300x600x170mm made of thermoplastic modular Panel with Lid, Shock proof, IP 65 having internally embedded gasket on both lid and flap with hylum sheet, Din rail with 10sqmm copper wire for wiring as complete and consisting of following components, a) 63A TPN MCB-1 No. b) MNX 40A 4 Pole Contactor-1 No. c) 20A TPN MCB-2 Nos. d) 24 Hrs Time Switch-1 No. e) 40A 4way connectors-11 Nos.

i) Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles with necessary clamps, screws etc. complete as required for drawing the cable. ii) a) 40mm OD and 32mm ID

Digging of trench of 0.6m x 0.5m wide refilling the trench to the required ground level and consolidating etc. complete. a) Hard soil

Supply and laying of country burnt bricks of size 8”x4”x3” in trench over cable after spreading soft soil at 2” height over the cable.

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, then refilling the cable. a) Tar Road

Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 CMT and fine aggregates @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. Thick, well compacted, for coping including cost of all materials, labour, HOM, curing complete as per specifications. No. KBS 4.1,4.2

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of materials, labour, HOM complete as per specifications, curing complete as per specifications. No. KSRB1000/2300. a) 300mm dia

Digging of Pit for GUY SET.

Supply of Guy set with 2 nos.15 Strain Insulator and concreting materials as per Drawing No. Bescom/GM/CP/7. Dated 24-10-07-GI

Fixing of Guy Set with break Insulator making use of 7/3.15mm (7/10SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing.

Supply and fixing of Spiral Earth Electrodes as per standard technical specifications as per ESCOM.

Supply and Installation of Cable Route Marker made up of RCC block of size 100cm (H) X 50cm (W) X 6cm (D) indicating Embossed text as NMPA LT Cable with Yellow paint and Red colour letters are fixing with cement concrete.

M/s Anugraha power services

M/s. Precision Electrical Works

ANU ELECTRICALS

OLIVE EXPORTS PVT.LTD.