AMC of Internal roads at SVIMS

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work

- do - In Ordinary soil by Manual means up to 3m depth.

- do - In Ordinary soil by Mechanical means up to 3m depth.

Dismantling, clearing away and carefully stacking materials useful for re-use, stone masonry in cement mortar.

Conveyance charges for machinary for transporting earth/ sand/ gravel etc. by tippers/ trucks, including loading, unloading and idle hire charges etc. complete.

Supply of 43 Grade OP Cement of approved brand, including cost, conveyance and stacking the same etc., complete as directed during execution.

Supply of fine aggregates/ sand (un screened) for concrete & filtering items of works, including cost, conveyance and stacking the same for departmental gauge for premesurements etc., complete as directed during execution.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:3:6) using 20 mm (0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Supply of 13.20/ 12.50 mm nominal size (SS5) (M-052) HB Stone of granite, trap and dolerite free from dust obtained by quarrying, wedging, breaking, burning and splitting including cost, conveyance and all incidental charges and stacking of same for departmental gauge for pre-measurements etc., complete.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230x110x70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Supply of 80/ 100 Bitumen (Bulk) VG 10

Cement Concrete (1:2.5:5) - Grade M15 using 20 mm (0.54 cu.m) and 12 mm (0.36 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Randum Rubble masonry in CM (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones)

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of below 36 mm diameter Fe 415 grade (as per IS 1786 - 2008) for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Providing flush pointing with CM (1:4) to Randum Rubble masonry including cost and conveyance of all materials etc., complete as directed during execution.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

- do - CM (1:5) 12 mm thick

- do - CM (1:5) 20 mm thick

Hire charges of Tractor including crew, oils, conveyance to site and all other incidental charges etc., complete.

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs. 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Painting two (2) coats for new wood work/ new plastered surface with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved colour and make, over priming coat with ready mixed cement primer for exterior grade-2 for new work, (total three (3) coats) including brushes to have an even shade, including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting single coat for old iron work/ old plastered surface with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved colour and make including brushes to have an even shade includingcost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting single coat to old external walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work for external walls.

Supply of Semi skilled work men (2nd class) Masons/ Stone Cutter/ Painter/ Carpenter

Supply of unskilled work men : Man mazdoors/ Women mazdoor

Construction of granular sub base (By Mix in Place Method at quarry) by providing Close graded material (Table 400-1) including conveyance, spreading in uniform layers with motor grader 110 HP, on prepared surface, mixing materials with Tractor-rotavator at OMC including cost of watering and compacting with vibratory roller 8-10 tonnes capacity to achieve desired density etc., complete as per Technical specification vide clause No.401 of MORD/MORTH (4th Revision) and as directed by the Engineer-in-charge - for grading-II material {CBR value = 25 (minimum)}

Providing, laying, spreading and compacting graded stone aggregate (IRC size HBG crushed stone aggregate confirming to Table 400-12 & Table 400-13) to Wet mix Macadam specification including premixing the material with water at OMC in Mechanical mixer, carriage of mixed material by Tipper to site, laying in uniform layers in sub-base/ base course on a well prepared sub-base and compacting with Vibratory roller 8-10 Tonnes weight to achieve desired density including lighting, barricading and maintenance of diversion etc., as per Technical specification vide clause No.406 of MORTH (5th Revision) etc., complete in all respects and as directed by Engineer-in-charge during execution - for thickness of more than 100 mm using vibratory roller.

Providing and laying of Hot applied Thermoplastic Compound 2.50 mm thick including with Reflectorising Glass Beads @ 250 gms per Sqm area, thickness of 2.50 mm is exclusive of surface applied Glass Beads as per IRC:35, including cost and conveyance of material, labour charges, hire charges of machinery, for finished item of work. The material should be of BERGER make (as per MORTH 803). The finished surface to be level, uniform and free from steaks and holes as per specification 803 MORTH - on Bituminus surface

Providing and laying Bituminous concrete of specified thickness by Hot mix plant 100-120 TPH capacity using bitumen of grade VG30, IRC size HBG crushed stone aggregates of specified grading, premixed with bituminous binder and filler (Qurry Rubbish) conforming to Table 500-17 & Table 500-9, transporting the hot mix to work site, laying with a mechanical paver finisher to the required grade, level and alignment rolling with smooth wheeled 8-10 tonne, vibratory 8-10 tonne and tandem 6-8 tonne rollers to achieve the desired compaction as per Specification vide Clause No.507 of MORTH (5th Revision) etc., complete in all respects and as directed by the Engineer-in-charge during execution - Grading-I 19 mm (Nominal Size) Layer thickness - 50 with bitumen binder @ 5.2% minimum by weight of total mix.

Repair to pot holes by removal of spoiled/ damaged material, trimming the sides to vertical and leveling the bottom, cleaning the same with compressed air or any appropriate method filled with 75 mm BM, applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and bottom as per technical specifications clauses 502 and 503 MORTH

Providing and fixing precast concrete blocks (interlocking pavers) using not less than M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 in all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. Final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as cobble stone, sand etc., labour and equipments such as cutting machine, lift, loading & unloading to work site cleariing, bringing required for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in-charge of the work.

Flooring with Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300X300X25 mm of any shades confirming to IS 1380 - 12013/ IS 1237-2012 set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Demolishing and disposal of unserviceable materials within 100 metres lead : Unreinforced cement concrete up to 15 cm thickness.

Cement Concrete (1:4:8) using 40 mm (0.54 cum), 20 mm (0.27 cum) and 12 mm (0.09 cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layer of not more than 15 cm thick well compacted including curing machine mixing, cost and conveyance of all materials etc., complete.

Supply of 160 mm dia Double socket PVC/ SWR Pipes as per ISI Standards 4 Kgs/ Sqm.Cm. including labour charges for laying, fixing and commissioning the PVC Pipes including couplers/ bends/ tees etc., including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice.

Masonry work in CM (1:6), with fly ash cement/ lime solid blocks of size 290 x 225 x 140 mm, using fly ash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sq.cm IS:12894-1990 Class-5 etc complete as directed during execution.

Supply and placing of RCC M20 Design Mix Pre-cast slabs of 80 mm thick, using 20 mm HBG crushed metal 0.80 cum, sand 0.400 cum and cement 350 kgs with water cement ratio of 0.53 (185.50 ltrs/ cum of CC) etc., from any source confirming to the relevent ISI standard including cost and conveyance of all mterials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department, including centering, shuttering charges but excluding cost of steel and its fabrication charges, for finished item of work (APSS No. 402).

Manufacture as per BIS:12592 (Part 1&2) Supply and delivery of Pre-cast concrtete manhole covers and frames with ISI marking including, loading, un-loading and stacking at site - Heavy duty - 35 with 560 mm dia Clear opening.

Supply of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter.

Supply of water based Cement primer of exterior Grade-II, of approved brand and make.

Supply of gravel for building/ road works including cost, conveyance and stacking the same for departmental gauge for pre-measurements etc., complete.

Hire charges for smooth wheeled roller 8 tonne, including crew, oils, conveyance to site and all other incidental charges etc., complete.

Painting two (2) coats for old wood work/ old plastered surface, with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved colour and make, including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Supply of High strength non-shrink cementitious micro concrete including cost, conveyance and all incidental charges etc., complete.

Digital design, supply and erection of flex sheet boards with back support of frame work made with 25 mm X 25 mm MS Square pipe (light weight) to erect all the specified places as directed by the department. The cost is including all materials, labour for printing, erection at specified place including cost and conveyance of all materials, labour charges etc., complete as directed by the department.

Supply and fixing of 54 mm OD Pipe - SDR 13.5 Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes) 1/2" to 2" SDR 13.5 Pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

Supply and fixing of 50 mm CPVC Ball valve