Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.8 LAccepted-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC L1 and Acceptable | |
| 2 | L2₹59.1 L+₹22,900.46 (0.39%)Rejected-AOC ARIHANT 15 A GOKUL SOCIETY SINDHWAL MATA ROAD PRATAPNAGAR VADODARA 390 004 | VADODARA | GUJARAT | 390004 | L2 | Rejected-AOC Not L1 | |
| 3 | L3₹59.1 L+₹27,277.68 (0.46%)Rejected-AOC HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L3 | Rejected-AOC Not L1 | |
| 4 | L4₹61.3 L+₹2.4 L (4.11%)Rejected-AOC G 16 JAY COMPLEX BELOW UMA CO OP BANK NIZAMPURA VADODARA 390 002 | VADODARA | VADODARA | GUJARAT | 390002 | L4 | Rejected-AOC Not L1 | |
| 5 | Rejected-Technical | - | Rejected-Technical Two Class below |
Tender Value
₹72 L
EMD Value
₹1.3 L
Closing Date
2 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AHMEDABAD
CWE AHMEDABAD
ADDN/ ALTN AND SPL REPAIR TO BLD NO P-118 (OTM) OF 29 AD REGT AT LANCER LINES, VADODARA UNDER GE (A) BARODA
2022_MES_569573_1
87144
Open Tender
Civil Works
Item Rate
240 days
BARODA
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (A) BARODA
₹1.3 L
Yes
30 Mar 2023
16 Dec 2022
4 Feb 2023
16 Dec 2022
2 Feb 2023
20 Jan 2023
Amount
Taking down cement plaster from brick/ concrete surface including racking out joint hacking for key scrubbing down with water complete all as specified and as directed.
Material and labour for 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface on wall finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15 mm thick rendering in two layer on brick work or concrete surface of wall, 5 mm thick plaster in cement mortar 1:4 mixed with water proofing compound (WPC) @ 3% by weight of cement surface finished even and smooth without using extra cement over 10 mm thick plaster in cement mortar 1:6 complete all as specified and as directed. (Note : Water proofing compound (WPC) shall be measured & paid separately)
Supply only water proofing compound complete all as specified and as directed.
Material and labour for rendering 5 mm thick on brick or concrete surface of ceiling in cement mortar 1:3 surface finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over a coat of primer and 3 mm thick wall care putty on wall complete all as specified and as directed. (Note : Putty shall be measured and paid extra)
Material and labour for prepartion of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed.
Mateiral and labour for prepartion of old plastered surface of ceiling and applying a coat of white wash complete all as specified and as directed.
Material and labour for prepartion of newly plastered surface of wall and applying two coats of cement base paint on external surfaces over a coat of alkaline resistant primer complete all as specified and as directed.
Material and labour for complete removal of existing treatment on wall surface and applying two coats of cement base paint on external surfaces over a coat of alkaline resistant primer complete all as specified and as directed.
Material and labour for complete removal of exisiting treatment on wall surface and applying two coats of oil bound distemper over one priming coat complete all as specified and as directed.
Material and labour for preparing new/ old plastered surfaces of wall and applying 3 mm thick layer of Wall care Putty complete all as specified and as directed.
Material and labour for preparation of newly steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Dismantling floor, health or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Demolition of stone slab/ of any description or thickness in floor, wall, aprons. Laid bedded and pointed in any mortor (without taking off backing coat) complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7 mm to 8 mm thick, area of each tiles exceeding 0.06 sqm and not exceeding 0.11 Sqm in floors. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed.
Material and labour for glazed ceramic coloured wall tiles in vertical surface 450 mm x 300 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
Material and labour for Non-Skid Ceramic coloured tiles 7 mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed with cement mortar 1:4 complete all as specified and as directed.
Material and labour for Non-Skid Ceramic coloured tiles 7 mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plastering with cement mortar 1:4 complete all as specified and as directed.
Material and labour for machine cut mirror polished kota stone slab flooring 20 mm - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick plastering with cement mortar 1:4 complete all as specified and as directed.
Material and labour for machine cut mirror polished Kota stone slab 20 mm - 25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick plastering with cement mortar 1:3 complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified and as directed.
Material and labour for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0 mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6 mm thick or external teak wood lipping fixed with nails, color and pattern as approved complete all as specified and as directed.
Material and labour for 35 mm thick 2nd class hard wood (factory made) glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc edges of trimming plain chamfered or rounded fitted with cut and metered beads for securing/ gauge etc sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) complete all as specified and as directed.
Supply and fix of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild Steel square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75 mm/ 100 mm long Mild Steel screw complete all as specified and as directed.
Supply and fix of 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of Mild Steel tube of 19 gauges thickness and size 19 mm x 19 mm for stiles, top and bottom rails, Mild Steel frame shall have a coat of steel primer of approved make and manufacture. Mild Steel frame shall be covered with 5 mm thick heat moulded prelam PVC 'C' channel size 30 mm thickness, 70 mm width, out of which 50 mm should be flat and 20 mm shall be tappered in 45 degree < on either sides forming stiles and 5 mm, 95 mm wide prelam PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide. PVC sheet out of which 75 mm shall be flat and 20 mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10 mm (5 mm x 2 mm) thick 20 mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5 mm thick both side PVC sheet to be fitted in the Mild Steel frame welded/ sealed to the stiles and rails with 7 mm (5 mm + 2 mm) thick 15 mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of C channel using PVC solvant adhesive complete all as specified and as directed.
Providing and fix in replacement factory made 18 (+ 0.7 mm) thick PVC sheet one sided prelaminated sheet cabinet shutter. 18 mm (+ 0.7 mm) thick sheet shutter of density 600 Kg/ m3 bent at 90 degree and finished all edges at all level for making edges, Lipping/ bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding tape complete all as per manufacturer's specifications & instructions and all as specified and as directed.
Material and labour for 100 mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/ PVC door frame with screw complete all as specified and as directed.
Supply and fix of 300 mm aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples complete all as specified and as directed.
Supply and fix of aluminium alloy handle 150 mm cast type anodised complete all as specified and as directed.
Supply and fix of 150 mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix of 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc complete all as specified and as directed.
Supply and fix of aluminium anodized hasp and staple of size 100 mm long, safety type complete all as specified and as directed.
Material and labour for framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Supply and fix for pressed steel doors frame (Thickness of Mild Steel sheet 1.25 mm) with one or more rebates size of frame 125 mm x 60 mm including necessary fixing lugs, stainless steel hinges, lock strike plate complete all as specified and as directed. Note :- Filling of hollow of frame with plain cement concrete and stainless steel hinges of 100 mm size will be measured and paid saperately under respective items.
Supply & fix for pressed steel doors frame (Thickness of Mild Steel sheet 1.25 mm) with one or more rebates size of frame 105 mm x 60 mm including necessary fixing lugs, stainless steel hinges, lock strike plate complete all as specified and as directed. Note :- Filling of hollow of frame with plain cement concrete and stainless steel hinges of 100 mm size will be measured and paid saperately under respective items.
Supply and fix of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of door, windows & ventilators including providing and fixing hinges/ pivot and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate 'z' section and other section of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary fillings up gaps at junction i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling chromium plated brass/ stainless steel screws complete all as specified and as directed.
Supply and fix of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropiate 'Z' sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary fillings up gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling chromium plated brass/ stainless steel screws complete all as specified and as per architectural drawings and as directed.
Supply and fix of sheet glass 4 mm thick oridinary quality and glazing with rubber packing to sliding windows/ ventilators in square exceeding 0.50 sqm in each pane complete all as specified and as directed.
Supply and fix of figured glass 4.0 mm thick pin headed type and glazing with rubber packing to sliding windows/ ventilators in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.
Supply and fix of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding complete all as specified and as directed.
Material and labour for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in filling hollow portion of pressed steel door frame complete all as specified and as directed.
Supply and fix in repair 20 mm dia anodised aluminium alloy curtain rail fixing brackets, stops, rollers complete all as specified and as directed.
Material and labour for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels and cutting chases for concealed water tubing or concealed conduit wiring and making good, cutting not exceeding 10 cm girth for bore of pipe 15 mm/ 20 mm complete all as specified and as directed.
Dismantling water tanks at any levels of any capacity exceeding 250 Litre and not exceeding 500 Litre complete all as specified and as directed.
Dismantling water tanks at any levels of any capacity exceeding 500 Litre and not exceeding 1000 Litre complete all as specified and as directed.
Supply and fix of rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 1000 liters capacity hoisted and fixed in position complete all as specified and as directed.
Taking up or down steel tubing and connections, 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections, 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections, 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.
Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.
Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.
Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.
Supply and fix in repair 60 cm long chromium plated brass 20 mm dia tubular towel rail with flanged ends complete all as specified and as directed.
Supply and fix in repair PVC flushing cistren low level, 10 Litre capacity with syphonic action type ball valve. Including inlet ball valve, PVC band 32 mm complete all as specified and as directed.
Supply and fix in repair vitreous china wash hand basin, white, flat back size 550 mm x 400 mm except taps but including brackets, chromium plated waste coupling complete all as specified and as directed.
Material and labour for 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply and fix in repairs 15 mm bore chromium plated stop cock/ Angle cook cast copper alloy, fancy type screwed down high pressure with capston head screwed for iron pipe complete all as specified and as directed.
Supply and fix in repairs chromium plated bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair 15 mm bore Mild Steel chromium plated shower rose of size 125 mm heavy grade with accessories complete all as specified and as directed.
Supply and fix in repair of 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and as directed.
Supply and fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
Supply and fix in repairs vitreous China squatting pan of Orissa pattern size 580 mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including P or S trap etc and provision of lime concrete bedding complete all as specified and as directed.
Supply and fix of 110 mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.
Supply and fix of 110 mm PVC (SWR) WC connector bent type to fit WC outlet complete all as specified and as directed.
Supply and fix of 110 mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal complete all as specified and as directed.
Supply and fix of 75 mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.
Supply and fix of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Supply and fix of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Supply and fix of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
Supply and fix of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
Supply and fix of PVC connection 15 mm bore with PTMT nut of length 450 mm complete all as specified and as directed.
Material and labour for vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
Material and labour for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and as directed.
Material and labour for 32 mm low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/ sq. cm complete all as specified and as directed.
Supply and fix of PVC connection 15 mm bore with PTMT nut of length 600 mm complete all as specified and as directed.
Material and labour for repairing by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement complete all as specified and as directed.
Material and labour for repairing by application of approved epoxy based bond coat on concrete surfaces or sound bonding of old and new concrete surfaces complete all as specified and as directed.
Material and labour for making of profile of structral memebers with polymer modified mortar in damaged areas 1:3 (Cement mortar) with 5-10 percentage addition of latex polymer, water/ cement ratio of 0.35 in 20 mm thick layers/ including levelling complete all as specified and as directed.
Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chhajjah, fins, facia etc and making good with plain cement concrete (1:1.5:3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth without using extra cement including necesary formwork and welding/ binding of reinforcement (including new reinforcement) if required complete making good to match with existing surfaces complete all as specified and as directed. (Note: Reinforcement will be measured and pai seperately under respective items)
Supply only mild steel TMT bars 8-10 mm dia and binding mild steel wire (annealed) not less than 0.09 mm dia or securing clips complete all as specified and as directed.
Material and labour for formwork to chullah hoods, chhajjah, troughs and similar items including edges complete all as specified and as directed.
Complete removal of existing unservicable roof treatment including taking down plaster, padding of any description and any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at outside Ministry of Defence land complete all as specified and as directed.
Material and labour for 25 mm average thick plain cement concrete padding in Cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) mixed with liquid water proofing admixture as per manufacturer's instructions finished even and smooth without using extra cement for laying of WPT complete. (WP admixture shall be measured and paid seperately). Complete all as specified and as directed.
Material and labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30 Litre per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen, over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.0 kg per Sqm 3 mm thick of unrolled & bonded to substrate with side and end laps 75 mm & 100 mm as per manufacturer’s instruction and applying over it one tack coat using with 85/ 25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with one coat of bituminous aluminum paint @ 0.200 Kg per Sqm as per manufacturer’s instructions complete all as specified and as directed. (Note: Primer and membrane to be used shall be of same manufacturer's and to be applied by authorised applicator of OEM.)
Supply only liquid water proofing admixture complete all as specified and as directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Mateiral and labour for 15 mm thick plaster in sunken portion with cement mortar 1:3 mixed with water proofing compound @ 2% by weight of cement plaster surface should be finished even and smooth without using extra cement complete all as specified and as directed. Note:- (Water proofing compound (WPC) will be measured and paid separately).
Material and labour for providing & laying APP based polymeric membrance of weight of 3 Kg/ Sqm with non woven polyster fibre as reinforcement over a coat of bituminious/ polymerized primer confirming to IS-3384 @ 0.30 Litres/ Sqm by torch application with side over laps & longitudinal joints over laps as per manufacturer instructions complete all as specified and as directed.
Material and labour for sunken portion filled with lean cement concrete 1:5:10 using aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.
Material and labour for 25 mm thick cement concrete in flooring type B0, 1:2:4 (12.5 mm graded aggregate) with water proofing compound @ 3% by weight of cement for laying floor tiles complete all as specified and as directed. Note: (Water proofing compound (WPC) will be measured and paid separately).
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for 75 mm thick plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Forming 65 mm deep x 10 mm thick contraction (dummy joints), filled with sealing compound grade "A" complete all as specified and as directed.
Material and labour for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.
Material and labour for along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes in apron complete all as specified and as directed.
Supply and fix of welded steel wire fabric cut to length, fixed to steel members/ reinforcement steel/ brick surface, weight per sqm not exceeding 4 Kg complete all as specified and as directed.
Material and labour for demolition of Brickwork or stone/ boulder masonary built in cement mortar or cement lime mortar complete all as specified and as directed.
Material and labur for Green Marble work 18 mm to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and as directed.
Material and labour for Brickwork with sub class ‘B’ bricks, straight or curved on plan exceeding 6 Meter mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Material and labour for plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Supply and fix for steel work in tubular section as in posts, trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 etc complete all as specified and as directed.
Material and labour for mild steel work as in clamps, holdfast and wall ties complete all as specified and as directed
Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeding 10 Kg each brackets, conforming to Fe. 290. Gde-E-165 (Brackets over 10 Kg each to be measured under 'Structural Steel') complete all as specified and as directed.
Supply and fix for 4.00 mm dia Plain mild steel wire, galvanised class 3, in cloth line including straining and fixing to wood, concrete or steel posts and/ or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins as directed. (each line of wire to be measured) complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply and fix of 375 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0 Kg of cement per sq. metre complete all as specified and as directed.
Material and labour for preparation on new wood surface with one coat of Pink primer with two coat of synthetic enamel paint on new surface over 10 cm in width or girth complete all as specified and as directed.
Material and labour for preparation on new steel surface with one coat of red oxide primer with two coat of synthetic enamel paint on new surface over 10 cm in width or girth complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets) removing materials from site and making good disturbed surfaces of walls roofs complete all as specified and as directed.
Taking down carefully unserviceable main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and as directed.
Material and labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming to IS 694 & color code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 3.0 mm thick factory made and factory painted with top cover 3.0 mm thick plastic laminated sheet & fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified as directed.
One light/ fan/ bell point controlled by one switch 6 Amp one way
One 3 pin switch socket combination 6 Amp on the independent board.
One 3 pin socket outlet on same board with other switches.
All as described as per item No 118.00 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 Volt grade with multi stranded copper conductor for earth wire for 15 Amp/ 16 Amp multi purpose socket combination point on independent board.
One light point controlled by two way switches complete all as specified and as directed.
Supply and fix of switch piano flush type single pole, one way 6 Amp, complete all as specified and as directed.
Supply and fix of switch piano flush type single pole, two way complete all as specified and as directed.
Supply and fix of switch socket combination 5 pin 6 Amp, Make: Anchor/ SSK/ Cona complete all as specified and as directed.
Supply and fix of switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.
Supply and fix in replacement under repair ceiling rose surface bakelite three terminal 65 mm x 50 mm three terminal 230 volts ISI marked complete all as specified and as directed.
Taking down unserviceable FTL and supply and fixing of 4 Feet 18 Watt LED Tube with Batten with system lumen output of 1800 lumens. System Efficacy should be more than 115lm/ W. The Luminaire should have Cool Daylight Color temp of 6500K & CRI more than 80. Life 40K burning hrs with 70% lumen maintenance. PF more than 0.95 Surge Protecton of 3 KV. All the Photometrical & Electrical parameters must be supported by LM79-08 test report from NABL accridiated LAB OR UL, R9 Value more than 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS. Make of LED from Philips/ Crompton/ Wipro. Housing of Batten should be made from Single piece powder coated CRCA sheet steel. Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens complete all as specified and as directed. Make: CG/ Phillips/ Wipro.
Supply and fix in replacement under repair MCB DB factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240V/ 430V for fixing of MCBs/ Isolators/ RCCBs complete all as specified and as directed. Make : Legrand/ Schneider/ L&T
TPN 4 way
SPN 12 way
SPN 8 way
Supply and fix of TPN 63 Amps 16 KA rupturing capacity. Make Legrand or its equivalent in Schnieder/ ABB complete all as specified and as directed.
Supply and fix of SPN 32 Amps 10 KA rupturing capacity. Make Legrand or its equivalent in Schnieder/ ABB complete all as specified and as directed.
MCB SP 5 Amp to 30 Amp 240 Volts complete all as specified and as directed.
Material and labour for sub main wiring concealede conduit using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed complete all as specified and as directed.
Supply and fixing of ceiling fan complete with blades, down rods electronic regulator and accessories 230 volt 1200 mm sweep, minimum air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current complete all as specified and as directed.
Earthing complete as per electrical plate Number 5 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600 mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level connected to and including galvanised iron or steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia Galvanised Iron medium grade including excavation and earth work in any type of soil, plain cement concrete pit, Cast Iron Frame, reinforceedment cement concrete covers complete. preferably vertically in ground with top edge not less than 2.9 metres below ground level connected with earthing lead of 25 mm x 5 mm dia galvanised iron strip including the following:- (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) Plain cement concrete pit in cement concrete 1:2:4 type B-1 of size 450 mm x 450 mm x 450 mm with Cast iron cover with suitable handle. (c) 40 mm nominal bore medium grade galvanised iron protection pipe 5 meter long for protection of earthing lead. (d) Requisite quantity of BFC compound (bentonide powder) and black cotton soil. (e) Testing of earthing. NOTE:- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost. complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons complete all as specified and as directed.
Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm dia graded stone aggregate) 100 mm thick as in floor complete all as specified and as directed.
Material and labour for laying chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed.
Demolition of unreinforced concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for precast cement concrete as in cover slabs (for manholes etc plain cement concrete 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed.
Material and labour for formwork to sides of concrete foundations, footings, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed.
Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Demolition and breaking up drain pipe 150 mm dia (salt glazed ware) set in cement mortar complete all as specified and as directed.
Material and labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) for 150 mm dia bore pipe work in foul position complete all as specified and as directed.
Material and labour for 150 mm nominal dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) smooth finished and reforming benching as required complete all as specified and as directed.
Demolition of unreinforced concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.
Material and labour for cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40 mm graded stone aggregate) complete all as specified and as directed.
Demolition of brick/ stone massonry work built in cement mortar including all quoins, arches, pillars complete all as specified and as directed.
Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for plain cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Material and labour for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface on wall finished even and smooth without using extra cement complete all as specified and as directed.
Dagli Engineers
Harsh Infrastructure
City Light
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .