Construction of Assistant Engineer Office at HP PWD Sub-Division Baroh under Division Tanda at Nagrota Bagwan inn District Kangra (H.P.) Deposit Work

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out wter (Surface and sub soil water) upto any depth or any height quantum of water including de-watering removal of slush, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-Incharge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or welding our works where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetera. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per approved drawing, design, specification and as per the entire satisfaction of the Engineer-Incharge including carriage of materials within all leads, lifts of and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm (Fifteen Centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and then in pick work complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals as per specification approved drawing, design, entire satisfaction and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications entire satisfaction and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera; including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls(any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not to mix less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications approved drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not to mix less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness including mouldings, cornices etcetera; upto all floor levels as per specifications approved drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing including upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents of 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete in reinforcement work for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floor level up to all height as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and specification. The rate inclusive of octroi, royality, Malkana, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilograms) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in in string courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor level as per specification approved drawing design as per entire satsfaction of the Engineer-Incharge including carriage of material incidentals due for its completion for all floors heights within all leads, lifts of materials and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 38mm (Thirty eight milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, as required at site including carriage of materials within all heights leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-Incharge including incidents. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; including carriage of material within all leads, lifts and other incidentals as per approved specification drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in foundation and plinth upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class half masonry using brick common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of material within all leads, lifts of materials and other incidentals, as per approved specifictions drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth dry hand packed with hard stone approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and filling brick bats/crushed stone aggregate 40mm (Forty millimetres) in sock pit complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS : 1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as pe specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing second class deodar wood 40mm (Forty millimetres) thick Fly wire mesh shutters using galvanized S.S. wire gauge of I.S. gauge designation 85G (Eighty five G) with wire of dia 0.56mm (Zero point five six millimetres) for doors windows and clerestorey windows including bright finished/black enamelled iron hinges with necessary screws complete as per specifications, drawing, design including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick Phenol bonded both side prelaminated BWP exterior/interior grade in matt finish ISI marked as per approved shade of Greenlum or its equivalent as per specifications, drawings design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board in shelves/box of Kitty/Centuary ply for cup board including its shelves and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging with butt joints & fixing with nails & screws etc complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 4mm (Four milimetres) thick burl ply of standard quality and of approved shade & design wall lining including fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 12mm (Twelve milimetres) water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete frame work for base to be measured & paid for separately including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 25mm (Twenty millimetres) dia stainless steel curtain rail with rollers stop ends and brackets in pelmets complete in all respect including carriage of materials within all leads, lifts and other incidentals and further as per drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetres) solid thick MS grills of required pattern in wooden frames of windows etc with M. S flat 20x5x8 mm (Twenty into Five into Eight milimetres), square or round bars in combination as per detail with round headed bolts and nuts or by screws complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Pilot/sheel or its equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of materials within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

300x16mm (Three hundred into Sixteen milimetres) nominal size

250x16mm (Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing aluminium oxidzed seccular anodized transparent or dyed to required colour and shade with necessary screws etcetera.Tower bolts (Barrel type) bright finished with nuts and screws etcetera. complete, including carriage of materials within all leads, lifts of materials and other incidentals and further as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

250x10mm (Two hundred fifty into Ten milimetres) nominal size

150x10mm (One hundred fifty into Ten milimetres) nominal size

Providing and fixing Providing and fixing aluminium Pilot oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carrige of materials within all leads, lifts and other. incidentals and further as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) nominal size

100mm (One hundred milimetres) nominal size

75mm (Seventy five milimetres) nominal size

Providing and fixing 250mm (Two hundred fifty milimetres) size aluminium Piloto oxidized seccolar anodized transparent or dyed to required colour and shade with necessary screws etcetera; hooks and eyes complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing bright finished brass fan light pivot with necessary screws etc. complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. single acting spring hinges bright finished with necessary screws etc. complete. within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 1mm (One milimetres) thick M.S. piano hinges brightfinished with nickel plating flange being 35mm (Thirty five milimetres) wide fixing with necessary screws complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10mm (Ten milimetres) dia bright finished brass ball catcher with necessary screws etc. complete. within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) M.S. double acting spring hinges bright finished with necessary screws etc. complete. within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) bright finished brass rim latch and lock a pair of knobs with necessary screws etc. indian make of approved quality complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & fixing 100mm (One hundred milimetres) aluminium pilot oxidized door stopper of bright finished brass with rubber cusion & screws etcetera, to suit shutter thickness complete including carriage of materials within all leads, lifts and other incidentals and further as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitrified tiles water proof stain and impect resistent heavy duty vetrified tiles of Orient -Bell / Rak/ Kajaria 600x600mm (Four hundred into Four hundred milimetres) size manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and other incidentals and further as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 20mm (Twenty milimetres) thick Kota Stone flooring Mirror polished with 7.5 cm (Seven decimal Five centimetres) wide uniform colour marble band with black mandana /Jaislmer yellow in base of 25mm (Twenty five millimetres) thick cement mortar 1:4 (One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including hosing, rubbing and polishing complete within all leads, lifts and other incidentals as per approved architectural drawing, design and specification and as directed by the Engineer-Incharge The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick kota stone slab skirting (mirror polished) in risers of steps, dado and pillars laid on a bed of 12mm (Twelve millimetres) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing, nosing and polishing and moulding complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying spartic ceramic tiles of Nitco/Kazaria/Rak 5.5 mm (Five point five millimetres) thick in flooring in treads of steps laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor level including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying wall tiles of IS quality 30x60cm (Thirty into sixty centimetres) of Nitco/Kajaria/Bell/Rak/ of approved shade in risers of steps and dado 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed over with cement slurry including carriage of materials within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Double charges vetrified tiles 60x60cm (Sixty into sixty centimetres) of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying granite stone in flooring 16 to 20mm (Sixteen to Twenty milimetres) (average) thickness base of cement mortar 1:3 (One cement: Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing noising moulding in single or double layer complete incluing carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet TATA / Shakti ISI marked or its equivalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials within all leads, lifts of materials and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips laying propper Gola/ shape 60cm (Sixty centimeters) over all with 0.60mm (Zero point Six zero millimeters) thick prepainted sheet ridges with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero milimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three milimetres) size dome shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres) dia bars in dome bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of materials within all leads, lifts and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge complete. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. mild steel B.P. sheet 1.6 to 2mm (One point six to two milimetres) thick fixed in eaves board/ceiling/cutting soffits /ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and laid for separately) including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Kisan/finolex of working pressure not less than 4.5/6.0 kg/Scm2 (Four point five/six point zero kilograms per sqaure centimetres) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150 mm (One hundred fifty millmetres) diameteres PVC Pipe

100 mm (One hundred millmetres) diameteres PVC Pipe

75 mm (Seventy five millmetres) diameteres PVC Pipe

Providing and fixing on wall face P.V.C. (D-plast) acessories for rain water pipes of working pressure not less than 4.5/6.0 kgs/Scm2 (Four pont five/six point zero kilograms per sqaure centimetres) supreme/kisan as per IS mark of supreme/kisan un plastisized PVC D-Plast high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimtres) diameteres PVC Plain bend

150mm (One hundred fifty milimtres) diameteres PVC Plain shoe

Providing and fixing galvanised M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size including cost of cutting holes and making good the walls etcetera; including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work/Tubular Section including cutting, fixing, lifting, hoisting and; placing in position complete of TATA/SAIL and applying a coat of red lead paint in beams joists channels ,angles, tee, flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters in angle iron section/ tubular section and the like including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian or equivalent after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushin wood primer pink including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian or its equivalent with readymixed paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter including carriage of materials wthin all leads, lifts of materials and other incidentals, as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian or its equivalent on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plaster to ceiling in cement mortar 1:4 (One cement: Four sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

20mm (Twenty milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth including drip course and grooves with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth including drip course and grooves with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/ concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth including drip course and grooves with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound distemper of Asian paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth including carriage of material within all leads, lifts of materials and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads, lifts of materials and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying concrete for plain/reinforced concrete in open foundations in 1:3:6 (One cement: three sand: Six graded broken/crushed stone aggregate 20mm(Twenty millimeters) nominal size complete as per drawings and technical specifications Clause 800, 803, 1202 and 1203 PCC grade M-10 (M-ten) in foundation and plinth, Retaining wall and Construction of Drain & channel complete including carriage of material within all leads, lifts of materials and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of KICH AISI Grade 316 OF 50mm (Fifty milimetres) diametres hand rail fixed with 35mm (Thirty five milimetres) dia and 15/20mm (Fifteen/Twenty millimetres) SST baluster (Design code DT 53-2-163) placed at 1200mm (One thousand two hundred milimetres) centre to centre along with 3(Three) numbers at the rate of 16mm (Sixteen milimetres) mid rails connected at the side of balustered with fixture . The balustered would be fixed on the floor with casted based plate minimum 6mm (Six milimetres) thickness based plates shall be consealed with suitable S.S.316 GRADE covered cap railing hight to be taken at the rate of 85cm (Eighty five centimetres) from floor level. The aplication shall be done as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black confirming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specification approved drawing, design and including entire carriage of materials within all leads lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen milimetres) Outer diameters pipe

1620 (20mm (Twenty milimetres) Outer diameters pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216x16mm (One thousand two hundred sixteen into Sixteen millimetres) Equal Tee of Kitec/Kisan

1620x20mm (One thousand six hundred twenty into Twenty millimetres) Equal Tee Kitec/Kisan

1620 x all branches (One thousand six hundred twenty millimetres) Reducing Tee of Kitec/Kisan

1216x1216x16mm (One thousand two hundred sixteen into One thousand two hundred sixteen into Sixteen millimetres) Female Branch Tee of Kitec/Kisan

1620x1620x20mm (One thousand six hundred twenty into One thousand six hundred twenty into Twenty millimetres) Female Branch Tee of Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) Female Elbows of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) Female Elbow of Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) male Thread connector of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) male Thread connector of Kitec /Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) female Thread connector of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) female Thread connector of Kitec /Kisan

1216 (One thousand two hundred sixteen ) Couplers of Kitec /Kisan

1620 (One thousand six hundred twenty) Couplers of Kitec /Kisan

1620x1216 (One thousand six hundred twenty into One thousand two hundred sixteen) Reducers of Kitec /Kisan

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete as per specification including entire carriage of materials within all leads lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china water closet squatting pan of Cera/Hindware (Orrisa type W.C. pan) size 58x44cm (fifty eight into forty four centimetres) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) approved shade including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing W.C. of (Prima) No. 2090 of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetres) of Hindware /Cera of approved shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) nominal bore vitreous china P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT PVC 10 (Ten) litres capacity automatic flushing cistern of Hindware /Cera of approved shade with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) including cariiage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe ISI marked or its equivalent with W.C. pan including entire carriage of material within all leads lifts and other incidentals and as per specification and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat hollow type and cover ISI marked or its equivalent for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china flat back large urinal No 500 size 63.3x39.5x42cm (Sixty three point three into thirty nine point five into forty two centimetres) size with auto cistan of Hindware/ Cera of approved shade including connection the urinal with waste pipe by means of white lead mixed with chopped hemp including entire carriage of material within all leads, lifts and other incidentals and as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 5 (Five) litres capacity automatic flushing cistern with a pair of C.I. Or M.S brackets complete with fittings including C.I. Syphonic appratus mosquitos proof lid, C.P. brass unions and coupling for connecting with inlet, outlet and over flow pipes including cutting holes and making good the same (Over- flow pipe to be measured and paid for separately) including cariiage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) ISI marked or its equivalent PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) C.P. Brass flush pipe / spreaders ISI marked or its equivalent for urinal with fittings such as unions clamps etc (all in C.P. brass) including cuttings hotles and making good the sames complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin IS marked No. 1025 (Clair) of Cera / Hindware of approved shade having size 55x40cm (Fifty five into forty centimetres) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x510mm (Six hundred ten into five hundred ten milimetres) Size bowl depth 200mm (Two hundred millimeters) stainless steel Kitchen sink of Cera/ Hindware/ Jaquar/ Diamond/ Unik of approved standard ISI marked with drain board and C.P. waste with C.I or M.S bracket painted white including cutting holes in walls and making good the same including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal I.S. marked No. 1025 Cera / Hindware of approved shade for wash basin complete at the back for the resption of pipe and fittings including entire carriage of materials within all leads, lifts and other incidentals and as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty makes ISI marked No. 8931) including entire carriage of materials within all leads, lifts and other incidentals and as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. brass ISI marked is No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. bottle trap ISI marked or its equivalent for wash basin and sink complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres P.V.C. waste pipe ISI marked or its equivalent flexible (Coil type) length not less that 800 mm (Eight hundred millimetres) complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating Jal/ESS ESS (Heavy duty makes ISI marked is No. 8934) for gully floor or Nahni trap including entire carriage of materials within all leads, lifts and other incidental as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror of Hindware/Cera or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) C.P. brass Towel rail ISI marked is No. 8934 of Jal/ESS ESS complete with C.P. brass brackets fixed to wooden plugs with C.P. brass including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass Jal/ESS ESS (Heavy duty makes ISI marked is No. 8934) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated brass soap dish ISI marked or its equivalent with C.P. brass brackets fixed to wooden plug with C.P. brass screws complete including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing division plate for urinals 600mmx330mm (Six hundred into three hundred thirty milimetres) size ISI marked or its equivalent complete including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated ISI marked fancy bib tap with capstan head of ISI marked No 8934 of Jal / ESS ESS complete including entire carriage of materials within all leads lifts and other incidentals and as per specifications directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan bead of IS marked No. 8934 of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass stop cock IS marked No. 8934 of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing two hole basin maxing faucet ISI marked or its equivalent including entire carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres brass angle valve without nuts IS marked No. 8934 of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore brass valve ISI marked No. 8934) of Jal/ESS ESS (Horizontal plunger type) high pressure with copper plate complete including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full way valve with wheel ISI marked No. 8934) Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank having capacity of 1000 (One thousand) liters of ISI 12701 marked with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen milimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level including carriage within all leads, lifts of materials and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetres) dia C.P. brass shower rose ISI marked or its equivalent with 15mm (Fifteen millimetres) or 20mm (Twenty millimetres) inlet complete including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore CP connection pipe ISI marked or its equivalent with brass union 30cm (Thirty Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 15mm (Fifteen millimetres) nominal bore in trenches galvanised mild steel tubes (light grade) ISI marked or its equivalent including fittings (Earth work in trenches to be measured and paid for separately) complete as per specification and entire carriage of material within all leads, lifts and other incidentals. as per approved drawing, design and as directed by the Engineer- Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union ISI marked or its equivalent for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) G.I./M.I. Union ISI marked or its equivalent of following sizes where not included in the items complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT jet spray of approved quality with 1.5 mtr. ( One point five metre) tube complete, including entire carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore ISI marked or its equivalent PVC connection pipe with brass union 30/45cm (Thirty/Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (Forty milimetres) nominal size) in haunching of S.W. Pipes of following internal diametre including concrete for bedding necessary form work and curing complete as per specification and entire carriage of material within all leads, lifts and other incidentals. as per approved drawing, design and as directed by the Engineer- Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC plain "Y" junction ISI marked or its equivalent including fixing with approved adhesive etc. complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110 mm (One hundred ten millmetres) diameteres

75 mm (Seventy five millmetres) diameteres

Providing and fixing PVC plain double equal branch ISI marked or its equivalent including fixing with approved adhesive etc. complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110 mm (One hundred ten millmetres) diameteres

75 mm (Seventy five millmetres) diameteres

Providing and fixing PVC clamps ISI marked or its equivalent of approved design with steel screws and rawal plugs etc. complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110 mm (One hundred ten millmetres) diameteres

75 mm (Seventy five millmetres) diameteres

Providing and fixing PVC "Y" junction ISI marked or its equivalent with oval access door, insertion rubber washer 3 mm (Three millmetres) thick bolts and nuts complete including fixing with approved adhesive etc. complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110 mm (One hundred ten millmetres) diameteres

75 mm (Seventy five millmetres) diameteres

Providing and fixing PVC plain "Y" junction ISI marked or its equivalent including fixing with approved adhesive etc. complete including fixing with approved adhesive etc. complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110 mm (One hundred ten millmetres) diameteres

75 mm (Seventy five millmetres) diameteres

Providing and fixing 110x75 mm (One hundred ten into seventy five millmetres) PVC reducer including jointing with approved adhesive etc. complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23 Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (One cement: Five sand) C.I. cover with frame (light duty) 355x610mm(Three hundred fifty five into Six hundred ten milimetres) internal dimensions total weight cover and frame should be not less than 38 Kgs (Thirty eight Kilograms) i.e. weight of cover 23 Kgs (twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) foundation concrete 1:5:10 (One cement: Five sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetres) deep including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of water lifting pump of 1.00 HP (One point zero horse power) of serex/Kirloskar/Crompton/Wortington including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying cast iron cover without frame for manhole for frame of internal dimension 455x610mm (Four hundred fifty five into six hundred ten milimetres) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23 Kgs (Twenty three kilograms) complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Saravjeet

Shubham Kashyap