Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAdmitted-Finance F 6 RACE COURSE OPP CENTRAL BANK OF INDIA DEHRADUN 248001 UTTARAKHAND | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹5.8 L | L1 | Admitted-Finance |
| 2 | L2₹6.5 LAdmitted-Finance | ₹6.5 L | L2 | Admitted-Finance |
| 3 | L3₹7.0 LAdmitted-Finance DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹7.0 L | L3 | Admitted-Finance |
| 4 | L4₹7.0 LAdmitted-Finance W 10 TRANSPORT NAGAR DEHRADUN UTTRAKHAND 248001 | DEHRADUN | UTTARAKHAND | 248001 | ₹7.0 L | L4 | Admitted-Finance |
| 5 | L5₹7.4 LAdmitted-Finance AMBEDKAR PARK AND RAWAT PG HOUSE WARD NO 10 KHASRA NO 2435 DEHRADUN UTTARAKHAND 248 140 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248140 | ₹7.4 L | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | TARUN ENGINEERING WORKS L3 | expertengineers L1 | S.K ASSOCIATE L5 | GLOBALVISION POWER SOLUTIONS PVT LTD L4 | trinity construction L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling and opening of parts for servicing of water cooled /Air cooled DG set of following capacity coupled with alternator, Maintenance and servicing mechanically and electrically, including cleaning, oiling /greasing, removing & replacement of defective / unserviceable parts with new parts,ie diesel filter /oil filter /Air filter /fan belt /fuel pipe/ engine oil pipe /Engine Oil etc as required at site as per manufacturer's instructions and checking of valves & nozzles etc, reassembling the parts of DG set at position ensuring proper alignment connecting to existing system and making DG set perfectly operational and testing at site connected load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. (including mentioned in Srl No. 1(a) & (b) here in below)
Notes:-(i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, `O’ rings, screws/gaskets/ packing /studs etc.(ii) Engine oil shall be drained out carefully, collected by the contractor in his own suitable containers and stored properly for checking serviceability including cleaning of oil sump by pouring kerosene oil all as directed by the Engineer-in-Charge
(iii) Fresh engine oil for DG sets shall be supplied by the contractor as “ Topping up and supply only” and shall be measured and paid separately under appropriate item of Sch . Its cost of filling is deemed to be included under the rates quoted by the contractor.
(a) 10 KVA TO 125KVA 3 Phase 50 HZ Make:Kirloskar/Kirloskar Green and existing make on site | 8 | Each Job | 5,500 ₹44,000 | 2,000 ₹16,000 | 5,000 ₹40,000 | 900 ₹7,200 | 4,000 ₹32,000 |
| 2.00 | (b) 250 KVA 3 Phase 50 HZ Make:Kirloskar Green | 1 | Each Set | 6,000 ₹6,000 | 2,000 ₹2,000 | 5,000 ₹5,000 | 1,400 ₹1,400 | 5,000 ₹5,000 |
| 3.00 | Supply only element diesel filter with gasket suitable for following capacity of DG set dismantled / fixed under Sch item No 1.00 here in above complete all as specified and directed.
(a)10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar | 8 | Each Job | 1,100 ₹8,800 | 350 ₹2,800 | 3,000 ₹24,000 | 550 ₹4,400 | 1,200 ₹9,600 |
| 4.00 | (b) 250 KVA 3 Phase 50 HZ Make:Kirloskar | 1 | Each set | 700 ₹700 | 500 ₹500 | 3,000 ₹3,000 | 320 ₹320 | 800 ₹800 |
| 5.00 | Supply only element Oil filter with gasket suitable for following capacity of DG set dismantled/fixed under Sch tem No 1.00 here in above complete all as specified and directed.
(a) 10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar | 8 | Each set | 800 ₹6,400 | 500 ₹4,000 | 3,000 ₹24,000 | 550 ₹4,400 | 1,500 ₹12,000 |
| 6.00 | (b) 250 KVA 3 Phase 50 HZ Make:Kirloskar | 1 | Each set | 800 ₹800 | 600 ₹600 | 3,000 ₹3,000 | 850 ₹850 | 1,200 ₹1,200 |
| 7.00 | Supply only Air cleaner element primary and safety for following capacity of DG set dismantled/fixed under Sch item No 1.00 here in above complete all as specified and directed.
(a) 10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar | 8 | Each | 2,500 ₹20,000 | 2,000 ₹16,000 | 3,000 ₹24,000 | 2,200 ₹17,600 | 3,500 ₹28,000 |
| 8.00 | (b) 250 KVA 3 Phase 50 HZ Make:Kirloskar | 1 | Each | 4,500 ₹4,500 | 4,000 ₹4,000 | 3,000 ₹3,000 | 6,500 ₹6,500 | 5,000 ₹5,000 |
| 9.00 | Dismantling and taking out the radiator fitted in following capacity of DG sets and strip opening complete radiator assembly,for servicing mechanically and proper cleaning of tubes with using de-scaling solution, including repair of water tubes and top/ bottom tanks by soldering / gas welding of leakage of tubes/tanks.including replacement of gasket, nut bolts,etc ensuring perfectly leak proof after servicing of radiator, re-assembling and fixing the same in position and testing the system complete all as specified and directed . Notes :- (i) Repairs/servicing/re-assembling and testing of radiator shall be carried out through a authorised representative of manufacturer.(ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item ’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, gaskets/ packing etc.(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre.
(a) 25 KVA to 125 KVA 3 phase 50 HZ .Make- Kirloskar Green and existing make on site | 1 | Each Job | 6,500 ₹6,500 | 3,500 ₹3,500 | 5,000 ₹5,000 | 2,500 ₹2,500 | 4,000 ₹4,000 |
| 10.00 | (b) 250 KVA 3 phase 50 HZ. Make- Kirloskar Green | 1 | Each Job | 7,000 ₹7,000 | 4,500 ₹4,500 | 5,000 ₹5,000 | 3,500 ₹3,500 | 5,000 ₹5,000 |
Updated dates
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
23 May 2026, 6:00 pmClosed
AGE (i) RAIWALA
AGE (i) RAIWALA
REPAIR/ REPLACEMENT OF DG SETS AND ALLIED WORKS AT MIL STN RAIWALA UNDER AGE (I) RAIWALA
2026_MES_762392_1
8142/26-27/E8
Open Tender
Civil Works
120 days
AGE (I) RAIWALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
AGE (I) RAIWALA
₹18,000
Yes
28 May 2026
28 Apr 2026
25 May 2026
28 Apr 2026
23 May 2026
10 May 2026
28 Apr 2026 - 9 May 2026
(b) 250 KVA 3 Phase 50 HZ Make:Kirloskar Green
Supply only element diesel filter with gasket suitable for following capacity of DG set dismantled / fixed under Sch item No 1.00 here in above complete all as specified and directed. (a)10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar
(b) 250 KVA 3 Phase 50 HZ Make:Kirloskar
Supply only element Oil filter with gasket suitable for following capacity of DG set dismantled/fixed under Sch tem No 1.00 here in above complete all as specified and directed. (a) 10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar
(b) 250 KVA 3 Phase 50 HZ Make:Kirloskar
Supply only Air cleaner element primary and safety for following capacity of DG set dismantled/fixed under Sch item No 1.00 here in above complete all as specified and directed. (a) 10 KVA TO 125 KVA 3 Phase 50 HZ Make:Kirloskar
(b) 250 KVA 3 Phase 50 HZ Make:Kirloskar
(b) 250 KVA 3 phase 50 HZ. Make- Kirloskar Green
Supply only the following items/spare parts suitable for raditor of DG set for following capacity dismantled/fixed under sl item No 10.0 here in above complete all as specified and directed.Note :-(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule item No 10.0 here in above.(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item. (a) Radiator hose set with clamp complete for 25 KVA to 125 KVA 3 phase 50 Hz DG Set
(b) Radiator hose set with clamp complete for 250 KVA 3 phase 50 Hz DG Set
Supply and topping up concentrated coolent suitable for radiator of DG set any capacity drained out / filling under`item No 1.00 here in above complete all as specified and directed.
Supply and topping up lubrication oil SAE-40 ( 15W-40 Ci4 grade) suitable for Engine of DG set any capacity drained out / filling under item No 1.00 here in above complete all as specified and directed.
Supply and fix in replacement of change over switch 200 Amp 415V four pole in sheet enclosure with side handle operation, off load change over complete all as specified and as directed.Make : Indoasian or equivalent of L&T, control and switch gear.
Supply and fix in replacement of change over switch 400 Amp 415V four pole in sheet enclosure with side handle operation, off load change over complete all as specified and as directed.Make : Indoasian or equivalent of L&T, control and switch gear.
Supply and fixing in replacement of power contactors 240 volt 50 Hz complete all as specefied and as directed.model no-MCX 41 of L&T or , C&S.SIEMENS
Opening,checking,adjusting and tightning of tappet cover complete by torque wrench by applying proper pressure of tappet cover gas kit of the 25 KVA DG Set to-125 KVA DG Set capacity
M&L replacement of battery lead set of two,suitable for 88-180AH capacity 1.5mtr long incuding GM Terminals one end, copper lugs other end complete all as specefied and as directed.
M&L for reconditionig of battery 12 volt 80AH to 250 AH and improve specific gravity minimum 1280 (g/cm³) of each cell including using electrolyte with transportation of bty from site to civil workshop and back fixing on existing position, testing of serviceability complete all as specefied and as directed.
M & L in replacement of Belt for fan fuel pump,water pump and oil pump complete set suitable for DG Set 25 to 250 KVA
Supply and fixing in replacement of controller KG934 for 25 KVA DG set all as specified and directed by Engr-in-charge. Note-: The contractor should visit the site before quoting the rate of controller.
M & L for repair and replacement , testing, fixing of Controller of 125 KVA DG Set and including connecting required wiring as per manufactures wiring diagram all as specified and directed by Engr-in -Chrage
M & L for repair in replacement of broken Door hinges as per exsiting model of 25 KVA DG set to 250 KVA DG Set
M & L for repair in replacement of LLOP for DG Set 125 KVA to 250 KVA complete with required accessories for replacement all as specified and directed by Engr-in-Charge.
M & L for repair in replacement of LLOP for DG Set 40 KVA to 100 KVA complete with required accessories for replacement all as specified and directed by Engr-in-Charge.
M & L for repair and replacement of Water pump for DG Set 40 KVA to 250 KVA capacity
M & L for repair and replacement of Rotating rectifier assembly three nos plus and three nos minus suitable for 125-250 KVA DG Set and required wiring all as specified and directed by Engr-in- Charge
Supply and fix test installation of automatic voltage regulator suitable for 40-100 KVA DG Set.Make-Kirloskar
Supply and fix test installation of automatic voltage regulator suitable for 125-250 KVA DG Set.Make-Kirloskar
S & F (in repairs) of fuel shut down solenoid valve kit including takingout old valve assy and making all connection testing for smooth operation in any type DG Set complete all as specified and directed by Engr-in-Charge.
S & F (in repairs) Fuel hose pipe flexible with metalic tape from fuel tank to filter, filter to FIP including allied nut bolt washer and coupling for DG set 25 KVA to 250 KVA with and including taking out old hose and making all connection testing for smooth operation all as directd.
M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6mm thick, burried directly in ground to a depth not less than 4.5 metres deep below ground level with top edge of earth plate not less than 3.75 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected , GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20mm dia bore GI pipe 'medium grade' as water pipe from earth chamber to upper edge of earth plate, GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 8mm dia @ 150 c/c both ways with 6mm dia MS round bar as in lifting handles, and mild steel angle iron frame 40mmx40mmx5mm for pit cover ,excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
M & L for taking down of existing fuel from fuel tank by any means, removing of sludge and sediments deposited inside the fuel tank by repeatedly washing by using of chemical & detergent with air compressor including rectifing of leakage if found and refixing the same in position as per direction of engineer in charge by testing all as specified and directed. cap 25-100 KVA DG Sets.
M & L for taking down of existing fuel from fuel tank by any means, removing of sludge and sediments deposited inside the fuel tank by repeatedly washing by using of chemical & detergent with air compressor including rectifing of leakage if found and refixing the same in position as per direction of engineer in charge by testing all as specified and directed. cap 125-250 KVA DG Sets.
Taking out old unserviceable UG cable of any size as specified and directed by Engineer-in-Charge
Supply and laying , fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, insulated, armoured heavy duty electric cable with aluminium conductor, XLPE , 1100 volts grade, cross-sectional area of size 120 Sqmm sqmm 3.5 core including aluminium lugs of suitable size complete with all as specified and directed. by Engr-in-charge.
(ii) All as per item No. 5 here-in-before but 95 sqmm 3.5 core complete all as specified
Excavation in trenches in any type of soil and n.exc 1.5 m wide and n.exc 1.5 m in depth for ,laying under ground electric cable and GI tubing (where provided for protection of cables), stay and getting out, trimming the sides, forming bottom surface to required level in any type of soil complete all specified and directed.
Returning, filling in, any type of soil including spreading, leveling, watering and well ramming in layers n.exc 250mm thick, in any tupe of soil complete all as specified and directed.
Removing excavated material (surplus soil) to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.
M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Note:- Punned (consolidated ) thicness of sand will be measured and paid.
Material and labour for cable protection with sub class ‘B’ bricks old size, laid dry, flat over sand cushining of cable, perpendicular across the cable in trenches complete all as specified and as directed.
M&L for road cutting for laying cable and through GI Pipe of suitable size making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) of 150mm X 100mm inrespect of width and thickness complete all as directed by Enger -in- charge.
Supply and fixingin repair GI tubing light grade 50mm bore, light grade as in sleeving etc laid in trenches/pole post/under culvert/under load etc for cable protection complete all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
8142TED.pdf
Tender Documents • 1.22 MB
MAKEAPPROVAL.pdf
Additional Documents • 15.01 MB
BOQ_854063.xls
BOQ • 0.52 MB
Download all tender documents and submit your bid