TENDER FOR INTERIOR WORK FOR GUJARAT MATIKAM KALAKARI & RURAL TECHNOLOGY INSTITUTE, GANDHINAGAR.

SR.NO DESCRIPTION QUANTITY UNIT RATE AMOUNT

PA Table/Executive officer table unit:

Providing and fixing 1800mmx 750mm / 1500mmx 750mm (or as specified in drawing)

1. Top: 19 MM thick 303 BWR ply + laminate top finish + 08mm. thk. inner Laminate + complete. side unit: 900x400 mm

which made from Both Side Laminated of approved shade, MR. grade & Conforming relevant IS code plywood, Melamine

Spray Polish or DUCO Automotive Paint Finished Chemically Treated Seasoned, Indian teakwood, 8mm.thick- Toughened-

Diamond finish edged- Glass with etching work at on top only,, Decorative Modesty panel, All under table box shutter &

1 Drawer shall be post formed in detailed edge etc. as per Architect Concept & Detailed Drawing. Item Incl. with all types of 1.00 Nos. 45,000.00

Required Accessories like, Under and Over top Cable raceway with cable manager & Minimum 4 cable holder, Alluminum,

alloyed 10 module electric openable box, soft close flip up, Keyboard Tray, Telescopic CPU. Trolley, monotor Stand as per

Architect concept, Soft close Telescopic Channel, S.S. Legs, S.S. Studs, Lock system, Handles etc. also incl. all types of Material,

tools, tolerance, labour etc. detailed & Directed by Architect & directed by EIC.

The work shall be done as per the drawing , specifications, sample approved and as directed by the Architect and Engineer-in-

charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives

consumable hardware & required SS 304 grade hardware/accessories , PU polish of approved make for all floors, all heights,

Staff Table unit:

" -----------------Do-------------------"-as per above specification for complete work.

( Top thickness - 25 mm )

Table top : 1200 x 600 x 750 mm (or as specified in drawing)

storage : Providing and fixing Storage 450mm. in depth which made by all inner surface should be 0.8mm thk liner Laminate

of approved shade & style finished on 18mm. thick, Conforming to relevant IS grade Commercial Plywood, All Shutter & Top

shall be made from 18mm. thick require edge post forming in approved shade with vertical and horizontal surface & all

exposed surface shall be finished with 1m. thk. Laminate of quality, brand & Shed. & only additional top made up of 25 mm

3 thk MDF Exterior grade The top has a post formation round edge finish with both side laminate All teakwood bidding should 30.00 sqm. 12,000.00

be finished by French semi glossy spray polish or otomotive DUCO Paint as per detail. Including all types of approved make &

Quality S.S. accessories, materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.

[Elevation Length / Height & Width shall be measured Depth of storage shall be 450mm. incl. all] All the work complete as per

the detailed drawing, mockup sample and instruction of Architect/EIC. Work complete as per the instruction of EIC.

Laminate finish partition :

Providing fabricating & Fixing low hight or full Height Partition Box type Partition with installation up to ceiling or beam

bottom as per drawing and made with both side laminated 12mm. thk Ply wood at all side The frame work shall be made

from square hollow aluminum anodized section size of 50x50x1.5 mm & 25x50x1.5 mm of approved make conforming to IS

code. The framework shall be fixed as per drawing vertically @ 600 mm c/c & horizontal 600 mm c/c horizontally or as per

detailed drawing with installation up to ceiling or beam bottom as per drawing. All Proof as per IS:710 Ply on both Side of

4 12mm.thk., All Proof as per IS:710 Plywood frame with Necessary support arrangement to erect the partition from main 7.00 sqm. 6,500.00

ceiling or slab as per design) Necessary Cut Out pivoted For door & Window, vision panel, make hole/face plate for conduit

pipes of electrical / networking cables with operable stud from partition Including all materials and labour etc. Complete as

per design and instructions by Architect / Engineer In-charge

Work complete including all type of material,fittings , fixtures, Finish, loading , unloading , transportation, all leads

,accessories, groove, adhesive ,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per

detailed drawings ,specifications & instruction of Client/EIC.

I/We am/are willing to carry out the work@___________________% above/below percent (Should be written in figures and words) of the estimated rate mentioned above. Amount of

my/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Above all items of "Schedule-B" with item Description, Unit, Rate & Amount have verified by me and found order.

(Vikram Upadhyay) (H.P. SONI)

Site Supervisior Additional Assistant Engineer