Tender ID

Karnataka

Retender

Works

Electrical

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

Cauvery Neeravari Nigam Limited

CNNL HR Div Khushalanagar | Karnataka

Amount: ₹3.8 LCloses: 17 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published5 Sept 2024
Closed17 Sept 2024
Retendered5 Sept 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 5 Sept 2024

Tender Value

₹3.8 L

EMD Value

₹9,625

Closing Date

17 Sept 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Executive Enginner

Office Number

Work Description

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

Tender Information

Tender ID

CNNL/2024-25/EL/WORK_INDENT2083

Reference Number

CNNL/2024-25/EL/WORK_INDENT2083

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

CNNL HR Div Khushalanagar

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredContractor Registration Certificate

RequiredAnnual Financial Turnover Certificate from CA with UDIN AND ITR of last five years

RequiredGST registration certificate

RequiredContractor Address & Contact number

RequiredElectrical contractor registration

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Electrical contractor Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

MD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The validity period for E.M.D. shall be 45 days beyond the validity period of tender

Sub-leasing / G.P.A. of work is prohibited

Conditional tenders will be rejected

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs

The tender processing fee will neither be refunded nor will be transferred to other works.

The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

Amount put to tender includes cost of cement, Steel and other materials and labour charges. The rates quoted must also be inclusive of Sales Tax, Excise Duty, Royalty, Octroi, Quarry fee etc., No extra payment on this account will be entertained

The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work.

Contractors should have to upload the scan copy of all necessary qualification documents and submit the original documents/certificate duly attested by notary while tender evaluation in the H.R. Division office, Kushalanagar for verification

The Rates quotated by the Contractor must be inclusive of All taxes( Including GST)

General conditions as per Bid Document

The successful Tenderer shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, H.R Division, Kushalanagara given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract

If the Contractor fails to start the work within 10 days from the date of Agreement then the Agreement will be cancelled without issuing any Notice

GST will be deducted as per the prevailing the government order from time to time in running bill Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹9,625

Important Dates

Last Activity

5 Sept 2024

Published

5 Sept 2024

Download Ends

11 Sept 2024

BOQ Preview

•

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

•

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785resistance test etc., complete with all lead and lifts and as directed by the engineer in charge of the work.

•

11 kV, Horizontal Cross Arm - Mild Steel (MS) complete with all lead and lifts and as directed by the engineer in charge of the work.

•

HT ST Support 50x8 mm Flat - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

11 kV, DOLO Cutout REC Specification 3 Nos set complete with all lead and lifts and as directed by the engineer in char...

•

11 kV, Special 3 Pin Cross Arm - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Guy Clamp - MS. complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Turn Buckle (GI). complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Anchor Rod using 12 mm rounds Guy Rod

•

complete with all lead and lifts and as directed by the engineer in charge of the work.

•

No. 8 Strain Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

7/10 SWG Guy Wire complete with all lead and lifts and as directed by the engineer in charge of the work.

•

RCC Pole Clamp - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Rabbit ACSR . complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Full Threaded Bolt & Nut as per IS-1367 16x65 mm MS.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Silicon Rubber Composite Insulator11 kV, 45 kN Polymeric Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

1 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod).complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 or 25/63/100 kVA 4/5 Star Rated Transformer on

•

RCC Pole - 9 Mtr Long, 145 Kg WL - MS.complete with all lead ...

•

No. 15 Strain Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 5 kVA, Aluminum Wdg, Star 1 (4 Star) .complete with all lead and lifts and as directed by the e...

•

Rod Earthing-Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected ...

•

Caution/Danger Board.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

GI Barbed wire (12 Mtr/Kg).complete with all lead and lifts and as directed by the the engineer in charge of the work.

•

8 SWG GI Wire.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

2 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Protection Kit.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT wiring kit for 25 KVA Transformers (MESCOM Specifications).complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Line Spacer for TC wiring.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Aluminium End Terminal (Lug) 95 Sqmm.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

PG Clamp for Rabbit to Rabbit.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories...

•

Measuring Equipment for LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering).complete with all lead and lifts and ...

•

HG Fuse Unit as per IS-5350 Part-2

•

11 kV, HG Fuse Unit with Solid Core Insulator

•

.complete with all lead and lifts and as directed by the engineer in charge of the work.(3 Nos set)

•

H- Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS .complete with all lead and lifts and as directed by the engineer in charg...

•

11 kV, 200 Amps Single Break GOS..complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Current Transformer, 3.75 VA, Ring type

•

CT Ratio - 50/5A, 0.5 Accuracy Class.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT 4 Pin Cross Arm - MS.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Measuring Equipment LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW).complete with all lead and lifts and as d...

•

3.5C x 95 Sqmm - 1.1 Kv - XLPE LTUG Cable.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Automatic Switch for Street Light.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

8 SWG GI Wire.complete with all lead and lifts and as directed by the engineer in charge of the work

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-2083.doc

Tender Document • 3.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Electrical

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

Cauvery Neeravari Nigam Limited

CNNL HR Div Khushalanagar | Karnataka

Amount: ₹3.8 LCloses: 17 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published5 Sept 2024
Closed17 Sept 2024
Retendered5 Sept 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 5 Sept 2024

Tender Value

₹3.8 L

EMD Value

₹9,625

Closing Date

17 Sept 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Executive Enginner

Office Number

Work Description

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

Tender Information

Tender ID

CNNL/2024-25/EL/WORK_INDENT2083

Reference Number

CNNL/2024-25/EL/WORK_INDENT2083

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

CNNL HR Div Khushalanagar

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredContractor Registration Certificate

RequiredAnnual Financial Turnover Certificate from CA with UDIN AND ITR of last five years

RequiredGST registration certificate

RequiredContractor Address & Contact number

RequiredElectrical contractor registration

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Electrical contractor Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

MD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The validity period for E.M.D. shall be 45 days beyond the validity period of tender

Sub-leasing / G.P.A. of work is prohibited

Conditional tenders will be rejected

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs

The tender processing fee will neither be refunded nor will be transferred to other works.

The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work.

The Rates quotated by the Contractor must be inclusive of All taxes( Including GST)

General conditions as per Bid Document

If the Contractor fails to start the work within 10 days from the date of Agreement then the Agreement will be cancelled without issuing any Notice

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹9,625

Important Dates

Last Activity

5 Sept 2024

Published

5 Sept 2024

Download Ends

11 Sept 2024

BOQ Preview

•

Supply of electricity to 12 KW streetlight connections at Bhagamandala Flyover

•

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785resistance test etc., complete with all lead and lifts and as directed by the engineer in charge of the work.

•

11 kV, Horizontal Cross Arm - Mild Steel (MS) complete with all lead and lifts and as directed by the engineer in charge of the work.

•

HT ST Support 50x8 mm Flat - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

11 kV, DOLO Cutout REC Specification 3 Nos set complete with all lead and lifts and as directed by the engineer in char...

•

11 kV, Special 3 Pin Cross Arm - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Guy Clamp - MS. complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Turn Buckle (GI). complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Anchor Rod using 12 mm rounds Guy Rod

•

complete with all lead and lifts and as directed by the engineer in charge of the work.

•

No. 8 Strain Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

7/10 SWG Guy Wire complete with all lead and lifts and as directed by the engineer in charge of the work.

•

RCC Pole Clamp - MS complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Rabbit ACSR . complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Full Threaded Bolt & Nut as per IS-1367 16x65 mm MS.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Silicon Rubber Composite Insulator11 kV, 45 kN Polymeric Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

1 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod).complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 or 25/63/100 kVA 4/5 Star Rated Transformer on

•

RCC Pole - 9 Mtr Long, 145 Kg WL - MS.complete with all lead ...

•

No. 15 Strain Insulator.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Caution/Danger Board.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

GI Barbed wire (12 Mtr/Kg).complete with all lead and lifts and as directed by the the engineer in charge of the work.

•

8 SWG GI Wire.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

2 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Protection Kit.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT wiring kit for 25 KVA Transformers (MESCOM Specifications).complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Line Spacer for TC wiring.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Aluminium End Terminal (Lug) 95 Sqmm.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

PG Clamp for Rabbit to Rabbit.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

HG Fuse Unit as per IS-5350 Part-2

•

11 kV, HG Fuse Unit with Solid Core Insulator

•

.complete with all lead and lifts and as directed by the engineer in charge of the work.(3 Nos set)

•

11 kV, 200 Amps Single Break GOS..complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT Current Transformer, 3.75 VA, Ring type

•

CT Ratio - 50/5A, 0.5 Accuracy Class.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

LT 4 Pin Cross Arm - MS.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

3.5C x 95 Sqmm - 1.1 Kv - XLPE LTUG Cable.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

Automatic Switch for Street Light.complete with all lead and lifts and as directed by the engineer in charge of the work.

•

8 SWG GI Wire.complete with all lead and lifts and as directed by the engineer in charge of the work

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-2083.doc

Tender Document • 3.24 MB

Ready to Participate?

Download all tender documents and submit your bid