Augmentation of LT Panel

Amount

S&F of compartmentalized cubical type panel board duly powder coated made out of 16SWG MS sheet with insulated Aluminium bus bar i/c interconnection copper wiring arrangement for mounting for switch gears, changeover switches, MCCB i/c making the foundation brick work/angle iron frame on floor/wall with proper locking arrangement etc. complete as required at site.

Depth 60 cm to 90 cm

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A, 16 KA,TPMCCB

315 A, 35 KA,TPMCCB,

supply installation, testing and commissioning of off load side handle change over switch & phase changer switch conforming to IS: 13947 (Part I & III) i/c connections etc. complete as required.

4 pole 320A

Providing & laying of XLPE insulated PVC sheathed Al. conductor Armoured cable 1.1 KV grade conforming IS 7098 as required.

3.5 core 120 sq. MM

P&F of Fire Extinguisher co2 type 4.5 KG

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

100 mm width x 50 mm depth x 1.6 mm thickness

Dismantling of Existing LT panel, Motor pump set & Ms pipe line with acessories with the help of skilled labour tools & tackles and shifted to Muncipal JE(E&M)-II store with all accessories etc complete as required

Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled labour, to & fro cartage along with replacement of its parts/accessories i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects. (Make: Kirloskar)

Having suction of 125 mm (Model no. SHM 100/26)

Replacement of bearing of following dia/models of storm water pump etc. as required. (Make: Kirloskar)

Having suction of 125 mm (Model no. SHM 100/26)

Supply,installation,testing and commissioning of cubical type control panel board for Three phase Submersible pumping set of 5HP rating complete with contactor,relay MCB, condenser,voltmeter, ammeter and indication lamp etc including connections etc. as reqd.

P&F of M.S.Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required of following Dia

Replacement of M.S. Blank Flange with required nut bolts & packing sheet etc complete as required of following Dia

300 mm (25 mm thickness)

Replacement of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:-

300 mm (25 mm thickness)

Replacement of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-

300 mm (8 mm thick),length 0.75 m

Repalcement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required

NRV 125 MM

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing of MS bar screen at 65- Block karol bagh pump house made out of MS channel 75x75x10 mm and centre covered with MS square bar of size 16 sqm duly welded with centre to centre distance 40 mm Work also include complete bar screen fixing the drain and complete bar screen duly painted with enamel paint. Bar screen duly fixed in side wall using mortar, tools and tackles etc. complete as required.