Laying of distribution pipe lines in different zones in connection with the work Augmentation of water supply system along with ancillary works for Balangir town .

Distribution pipe line Network Removing and re fixing of precast cement concrete interlocking paving blocks of all sizes over 200mm thick cource sand bedding (duly compacted) including filling of joints with sand complete in all respect including cast of all taxes, lead, royalty as per the direction of Engineer-in-charge.

Removing of precast cement concrete interlocking paving blocks of all sizes including stacking of paver blocks all complete as per the direction of Engineer in charge.

Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the directin of engineer-in-charge.

Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Cutting asphalt or bituminous road of flexible pavements and disposal of dismantalled materials upto a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T& P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Cutting of C.I /DI pipe by eletric arc welding at site including cost of all materials, labour, T & P etc all complete as per direction of the engineer–in–charge.

Supplying all materials, labour and T&P for laying in trenches centrifugally Ductile (spun) Iron pressure pipes K-7 / K-9 with cement mortar lining conforming to I.S : 8329 - 2000 of the following nominal diameter including transportation from Departmental store of all materials to site all complete as per specification and direction of the Engineer-in-charge . 100 mm dia DI K-7 Pipe

150 mm dia DI K-7 Pipe

200 mm dia DI K-7 Pipe

250 mm dia DI K-7 Pipe

300 mm dia DI K-7 Pipe

Supplying, fitting, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 as per specification including const of transportation all complete as per direction of Engineer-in-charge. Cost of Specials. (for 100 to 300 mm dia size)

Special laying (Labour only)

Providing push-on joints confirmming to IS 3114-1994 to Centrifugally (Spun) CI/DI Pipes using rubber gaskets confirming to IS 5382 of SBR quality including testing of joints as per specification all complete and as per direction of Engineer-in-charge. (Labour only) 100 mm dia DI K-7 Pipe

150 mm dia DI K-7 Pipe

200 mm dia DI K-7 Pipe

250 mm dia DI K-7 Pipe

300 mm dia DI K-7 Pipe

Supplying Providing flanged joints conforming to IS:6392,13159 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification all complete as per direction of Engineer-in-charge 100 mm dia DI K-7 Pipe

150 mm dia DI K-7 Pipe

200 mm dia DI K-7 Pipe

250 mm dia DI K-7 Pipe

300 mm dia DI K-7 Pipe

Supplying all materals, labour and T&P for laying of MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes, Painting charges and fitting to site etc all complete as per the direction of Engineer-In-Charge. 100mm dia M.S.Pipe (4.50mm thick)

100mm dia M.S. Flange.(10mm thick)

100mm dia x 45º MS fabricated offset bend

150mm dia M.S.Pipe (4.50mm thick)

150mm dia M.S. Flange.(10mm thick)

150mm dia x 45º MS fabricated offset bend

200mm dia M.S.Pipe (6.30mm thick)

200mm dia M.S. Flange.(12mm thick)

200mm dia x 45º MS fabricated offset bend

250mm dia M.S.Pipe (6.30mm thick)

250mm dia M.S. Flange.(12mm thick)

250mm dia x 45º MS fabricated offset bend

300mm dia M.S.Pipe (6.30mm thick)

300mm dia M.S. Flange.(12mm thick)

300mm dia x 45º MS fabricated offset bend

100 x 100 x 100 mm dia MS AF TEE

150 x 150 x 150 mm dia MS AF TEE

200 x 200 x 200 mm dia MS AF TEE

250 x 250 x 250 mm dia MS AF TEE

300 x 300 x 300 mm dia MS AF TEE

150 x 100 x 150 mm dia M.S UN EQUAL AF TEE

200 x 100 x 200 mm dia M.S UN EQUAL AF TEE

200 x 150 x 200 mm dia M.S UN EQUAL AF TEE

250 x 200 x 250 mm dia M.S UN EQUAL AF TEE

300 x 200 x 300 mm dia M.S UN EQUAL AF TEE

300 x 150 x 300 mm dia M.S UN EQUAL AF TEE

150mm x 100mm M.S Reducer

200mm x 150mm M.S Reducer

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials, labour and T&P for Making inter-connection of new D.I. pipe line with old C.I./DI pipe line all complete as per specification and direction of Engineer in charge. i) 100mm.dia

ii) 150mm.dia

iii) 200mm.dia

iv) 250mm.dia

v) 300mm.dia

Supplying all materials, labour and T & P for construction of brick masonry valve chamber of following sizes including earth work all kinds of soil, 100 mm thick sand filling in foundation, lean cement concrete (1:4:8) of 150mm thick, Fly ash brick masonry in cement mortar (1:4) of 230mm thick wall in foundation and plinth, 12mm thick cement plaster (1:4) inside. 16mm thick cement plaster (1:6) outside, 100mm thick cover slab in R.C.C. (M20) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top, centring and shuttering and refilling etc. including transportation of all materials to site all complete as per specification and direction of the Engineer-in-charge. i)Construction of Sluice Valve Chamber of size for 3" to 6 "dia pipe (size 0.90 x 0.90 x 1.10)

ii) Construcion of Sluice Valve Chamber of size for 7" to 10 "dia pipe (size 1.20x1.20x1.30)

iii)Construction of Sluice Valve Chamber of size for 12" to 14 "dia pipe (size 1.50x1.50x1.40) Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Supplying all material, labour, T&P for Brick masonry work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in cement mortar (1:4) in foundation & plinth including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:4) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all material, labour, T&P for 16mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all taxes, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P)

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.

Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.

Providing and fixing of 80mm thick precast cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required pattern including cutting, corbelling, splays whereever necessery to proper size with all cost, conveyance, taxes and cost of all materials, labour T&P etc. all complete as per specification and direction of the Engineer-in-Charge.

Supplying all materials, labour, T&P for Fixing ferrule conforming to IS:2692-1978 of the following nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) etc. all complete as per specification and direction of the Engineer-in-Charge.

Supplying all materials, labour, T&P for laying in trenches PVC pipes conforming to ASTM-D-1785/89 (Schedule-80) of the following nominal bore and pipe fittings including testing etc all complete as per specification and direction of the Engineer-in-Charge. i) 20mm Dia

ii) 25mm Dia

NH/SH Crossing by Microtunnelling (Horizontal Thrust boring/pushing method) Suppying all material, labour, T&P for crossing of M.S. pipe line across Railway line/NH or SH Road by Horizontal Thrust boring/pushing method (in slope of 1 in 40 towards downstream) including encasing the pipe line by different dia including excavation of Push Pit, dewatering if any, laying & jointing of casing & carrier pipe, capping & sealing casing pipe etc for carrier pipe & installation of sign boards on either side etc all complete as per specification and direction of Engineer-in-charge & Railway Department /State Works Department. i) 600mm dia Casing Pipe

ii) 400mm dia Casing Pipe

Supplying all materials, labour and T&P for Providing M.S pipes of all classes conforming to IS:3589 & IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO: 8501-1 followed by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. i) 610.0 mm Outer dia & 12.5 mm thck MS Pipe

ii) 406.4 mm Outer dia & 8.8 mm thck MS Pipe

iii) 219.1 mm Outer dia & 6.3 mm thck MS Pipe

iv) 323.90 mm Outer dia & 7.10 mm thck MS Pipe

Supplying all materials, labour and T&P for Providing & fixing High Density Polythylene spacers between casing & carrier pipe to avoid contact 2.5m c/c all complete as per specification (BS 105;GUIDELINES ON PIPELINE CROSSINGS UNDER RAILWAY TRACK/NH /STATE HIGHWAY) and direction of Engineer In-Charge.

Supplying all materials, labour and T&P for fitting and fixing of CI mechanical joint collar conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints etc. all complete as per specification and direction of the Engineer-in-Charge. i) 100mm Dia CI MJ Collar

ii) 150mm Dia CI MJ Collar

iii) 200mm Dia CI MJ Collar

iv) 250mm Dia CI MJ Collar

v) 300mm Dia CI MJ Collar

Supplying all materials, labour and T&P for fitting and fixing of CI mechanical joint socket conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints etc. all complete as per specification and direction of the Engineer-in-Charge. i) 100mm Dia CI MJ Socket

ii) 150mm Dia CI MJ Socket

iii) 200mm Dia CI MJ Socket

iv) 250mm Dia CI MJ Socket

v) 300mm Dia CI MJ Socket

Supplying all materials, labour, T&P for fitting fixing of DI Resilient Seated Glandless Sluice Valve of RATING PN - 1.0/1.6(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters etc. all complete as per specification and direction of the Engineer-in-Charge. (Make-VAG/AUDCO/KIRLOSKAR/Hawle) Cost of materials i) 100mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.0)

ii) 150 mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.0)

iii) 200 mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.0)

iv) 250 mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.0)

v) 300 mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.0)

Labour charges for fixing i) 100 mm Diameter

ii) 150 mm Diameter

iii) 200 mm Diameter

iv) 250 mm Diameter

v) 300 mm Diameter

Clear water rising main pipe line Work Removing and re fixing of precast cement concrete interlocking paving blocks of all sizes over 200mm thick cource sand bedding (duly compacted) including filling of joints with sand complete in all respect including cast of all taxes, lead, royalty as per the direction of Engineer-in-charge.

Removing of precast cement concrete interlocking paving blocks of all sizes including stacking of paver blocks all complete as per the direction of Engineer in charge.

Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the directin of engineer-in-charge.

Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Cutting asphalt or bituminous road of flexible pavements and disposal of dismantalled materials upto a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T& P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Cutting of C.I /DI pipe by eletric arc welding at site including cost of all materials, labour, T & P etc all complete as per direction of the engineer–in–charge.

Supplying all materials, labour and T&P for laying in trenches centrifugally Ductile (spun) Iron pressure pipes K-7 / K-9 with cement mortar lining conforming to I.S : 8329 - 2000 of the following nominal diameter including transportation from Departmental store of all materials to site all complete as per specification and direction of the Engineer-in-charge . i) 200mm dia D.I. K-7 Pipe

ii) 250mm dia D.I. K-9 Pipe

iii) 400mm dia D.I. K-9 Pipe

Supplying, fitting, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 as per specification including const of transportation all complete as per direction of Engineer-in-charge. A. Cost of Specials i) 200mm dia D.I. K-7 Pipe

ii) 250mm dia D.I. K-9 Pipe

iii) 400mm dia D.I. K-9 Pipe

B Special Laying i) 200mm dia D.I. K-7 Pipe

250mm dia D.I. K-9 Pipe

400mm dia D.I. K-9 Pipe

Providing push-on joints confirmming to IS 3114-1994 to Centrifugally (Spun) CI/DI Pipes using rubber gaskets confirming to IS 5382 of SBR quality including testing of joints as per specification all complete and as per direction of Engineer-in-charge. (Labour only) i) 200mm dia D.I. K-7 Pipe

ii) 250mm dia D.I. K-9 Pipe

iii) 400mm dia D.I. K-9 Pipe

Supplying Providing flanged joints conforming to IS:6392,13159 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification all complete as per direction of Engineer-in-charge i) 200mm dia D.I. K-7 Pipe

ii) 250mm dia D.I. K-9 Pipe

iii) 400mm dia D.I. K-9 Pipe

Supplying all materals, labour and T&P for laying of MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes, Painting charges and fitting to site etc all complete as per the direction of E.I.C. i) 100mm dia M.S.Pipe (4.50mm thick)

ii) 100mm dia M.S. Flange.(10mm thick)

iii) 200mm dia M.S.Pipe (6.30mm thick)

iv) 200mm dia M.S. Flange.(12mm thick)

v) 200mm dia x 45º MS fabricated offet bend

iii) 250mm dia M.S.Pipe (6.30mm thick)

vi) 250mm dia M.S. Flange.(12mm thick)

viii) 250mm dia x 45º MS fabricated offet bend

ix)400mm dia M.S.Pipe (8.80mm thick)

x) 400mm dia M.S. Flange.(12mm thick)

xi) 400mm dia x 45º MS fabricated offet bend

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials, labour and T&P for fixing of Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) all complete as per specification and direction of Engineer-in-Charge. i) 80mm dia Kirloskar / Vag/ Audco or equivalent make Tamperproof Kinetic Air Valve (Without Isolating SLB, IS 14845

ii) 100mm dia Kirloskar / Vag/ Audco or equivalent make Tamperproof Kinetic Air Valve (Without Isolating SLB, IS 14845

Construction of RCC Thrust Block Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all taxes, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour and T&P for Making inter-connection of new D.I. pipe line with old C.I./DI pipe line all complete as per specification and direction of Engineer in charge. i) 200mm.dia.:-

ii) 250mm.dia.:-

iii) 400mm.dia.:-

Supplying all materials, labour and T & P for construction of brick masonry valve chamber of following sizes including earth work all kinds of soil, 100 mm thick sand filling in foundation, lean cement concrete (1:4:8) of 150mm thick, Fly ash brick masonry in cement mortar (1:4) of 230mm thick wall in foundation and plinth, 12mm thick cement plaster (1:4) inside. 16mm thick cement plaster (1:6) outside, 100mm thick cover slab in R.C.C. (M20) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top, centring and shuttering and refilling etc. including transportation of all materials to site all complete as per specification and direction of the Engineer-in-charge. i) Construction of Sluice Valve Chamber of size for 7" to 10 "dia pipe (1.20x1.20x1.30)

iii)Construction of Sluice Valve Chamber of size for 12" to 14 "dia pipe (size 1.50x1.50x1.40) Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Supplying all material, labour, T&P for Brick masonry work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in cement mortar (1:4) in foundation & plinth including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:4) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all material, labour, T&P for 16mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all taxes, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P)

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.

Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.

Providing and fixing of 80mm thick precast cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required pattern including cutting, corbelling, splays whereever necessery to proper size with all cost, conveyance, taxes and cost of all materials, labour T&P etc. all complete as per specification and direction of the Engineer-in-Charge.

Supplying all materials, labour, T&P for Fixing ferrule conforming to IS:2692-1978 of the following nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) etc. all complete as per specification and direction of the Engineer-in-Charge.

Supplying all materials, labour, T&P for laying in trenches PVC pipes conforming to ASTM-D-1785/89 (Schedule-80) of the following nominal bore and pipe fittings including testing etc all complete as per specification and direction of the Engineer-in-Charge. i) 20mm diameter

ii) 25mm diameter

NH/SH Crossing by Microtunnelling (Horizontal Thrust boring/pushing method) Suppying all material, labour, T&P for crossing of M.S. pipe line across Railway line/NH or SH Road by Horizontal Thrust boring/pushing method (in slope of 1 in 40 towards downstream) including encasing the pipe line by different dia including excavation of Push Pit, dewatering if any, laying & jointing of casing & carrier pipe, capping & sealing casing pipe etc for carrier pipe & installation of sign boards on either side etc all complete as per specification and direction of Engineer-in-charge & Railway Department /State Works Department. i) 600mm dia Casing Pipe

ii) 400mm dia Casing Pipe

Supplying all materials, labour and T&P for Providing M.S pipes of all classes conforming to IS:3589 & IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO: 8501-1 followed by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. i) 610.0 mm Outer dia & 12.5 mm thck MS Pipe

ii) 406.4 mm Outer dia & 8.8 mm thck MS Pipe

iii) 219.1 mm Outer dia & 6.3 mm thck MS Pipe

iv) 323.90 mm Outer dia & 7.10 mm thck MS Pipe

Supplying all materials, labour and T&P for Providing & fixing High Density Polythylene spacers between casing & carrier pipe to avoid contact 2.5m c/c all complete as per specification (BS 105;GUIDELINES ON PIPELINE CROSSINGS UNDER RAILWAY TRACK/NH /STATE HIGHWAY) and direction of Engineer In-Charge.

Supplying all materials, labour, T&P for fitting fixing of DI Resilient Seated Glandless Sluice Valve of RATING PN - 1.0/1.6(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters etc. all complete as per specification and direction of the Engineer-in-Charge. (Make-VAG/AUDCO/KIRLOSKAR/Hawle) Cost of materials i) 200mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

250mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

400mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)

b) Labour charges for fixing 200 mm diameter

250 mm diameter

400 mm diameter

Raw water pipe line work Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the directin of engineer-in-charge.

Cutting asphalt or bituminous road of flexible pavements and disposal of dismantalled materials upto a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T& P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Cutting of C.I /DI pipe by eletric arc welding at site including cost of all materials, labour, T & P etc all complete as per direction of the engineer–in–charge.

Supplying all materials, labour and T&P for laying in trenches centrifugally Ductile (spun) Iron pressure pipes K-7 / K-9 with cement mortar lining conforming to I.S : 8329 - 2000 of the following nominal diameter including transportation from Departmental store of all materials to site all complete as per specification and direction of the Engineer-in-charge. i) 700mm dia DI K-9 Pipe

Supplying, fitting, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 as per specification including const of transportation all complete as per direction of Engineer-in-charge. Cost Special i) 700mm dia DI K-9 Pipe

Special Laying (Labour only) ii) 700mm dia DI K-9 Pipe

Providing push-on joints confirmming to IS 3114-1994 to Centrifugally (Spun) CI/DI Pipes using rubber gaskets confirming to IS 5382 of SBR quality including testing of joints as per specification all complete and as per direction of Engineer-in-charge.

Supplying Providing flanged joints conforming to IS:6392,13159 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification all complete as per direction of Engineer-in-charge

Supplying all materals, labour and T&P for laying of MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes, Painting charges and fitting to site etc all complete as per the direction of Engineer-In-Charge. i) 150mm dia M.S.Pipe (4.50mm thick)

ii) 150mm dia M.S. Flange.(10mm thick)

iii) 700mm dia M.S.Pipe (14.20mm thick)

iv) 700mm dia M.S. Flange.(20mm thick)

v) 700mm dia x 45º MS fabricated offet bend

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials, labour and T&P for fixing of Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) all complete as per specification and direction of Engineer-in-Charge. i) 150mm dia Kirloskar / Vag/ Audco or equivalent make Tamperproof Kinetic Air Valve (Without Isolating SLB, IS 14845

Construction of RCC Thrust Block Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all taxes, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge.

Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.

Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.

HOUSE SERVICE CONNECTIONS (from 100mm dia distribution main) Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the directin of engineer-in-charge.

Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.

Supplying all Labour,T&P and Drilling in 100mm DI pipe,fitting of Ductile Iron Tapping Saddle using suitable bolts,nuts etc with lead of all materials to site as per specification and direction of Engineer in charge

Supplying all materials, labour T&P for laying in trenches 20mm dia MDPE Pipe P.N. 16 including fitting ans fixing with required fixtures all complete as per specification and direction of Engineer in charge (make - Plumteck/Griraj or Equivalent)

Supplying all materials, labour T&P for fitting, fixing of 10mm to 25mm dia brass ferrule in DI/CI pipe line with cost of ferrule all complete as per specification and direction of Engineer in charge

Supplying all materials, labour T&P for fitting, fixing of following fixtures all complete as per specification and direction of Engineer in charge i) 20mm dia MDPE FTA Elbow

ii) 20mm dia MDPE FTA

iii) 20mm dia MDPE Elbow double Compression

iv) 20mm dia MDPE Coupler double Compression

v) 20mm dia MTA

vi) 20 x 25 mm dia UPVC Reducer FTA

Supplying all Labour,T&P and Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages all complete as per specification and direction of Engineer in charge

Supplying all material, labour, T&P and fitting & fixing of 15 mm dia pvc bib cock all complete as per specification and direction of Engineer in charge

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

b) With 150mm dia distribution main Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the directin of engineer-in-charge.

Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.

Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.

Supplying all Labour,T&P and Drilling in 150mm DI pipe,fitting of Ductile Iron Tapping Saddle using suitable bolts,nuts etc with lead of all materials to site as per specification and direction of Engineer in charge

Supplying all materials, labour T&P for laying in trenches 20mm dia MDPE Pipe P.N. 16 including fitting ans fixing with required fixtures all complete as per specification and direction of Engineer in charge (make - Plumteck/Griraj or Equivalent)

Supplying all materials, labour T&P for fitting, fixing of 10mm to 25mm dia brass ferrule in DI/CI pipe line with cost of ferrule all complete as per specification and direction of Engineer in charge

Supplying all materials, labour T&P for fitting, fixing of following fixtures all complete as per specification and direction of Engineer in charge i) 20mm dia MDPE FTA Elbow

ii) 20mm dia MDPE FTA

iii) 20mm dia MDPE Elbow double Compression

iv) 20mm dia MDPE Coupler double Compression

v) 20mm dia MTA

vi) 20 x 25 mm dia UPVC Reducer FTA

Supplying all Labour,T&P and Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages all complete as per specification and direction of Engineer in charge

Supplying all material, labour, T&P and fitting & fixing of 15 mm dia pvc bib cock all complete as per specification and direction of Engineer in charge

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.

Please Enable Macros to View BoQ information