REPAIR TO HARD STANDING, PAVER BLOCK, CHEQUERED TILES, FENCING, STEEL GATE AND DRAIN IN DOMESTIC AREA OF BRD UNDER GE (AF) MC CHANDIGARH

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level), complete all as specified and directed.

Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in flooring, finished even and smooth using extra cement, complete all as specified and directed.

M&L cement pavigres tiles 30cmx30cmx10mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including demolition of existing tile complete all as specified and directed. Note : The manufacturer's test certificate for tiles must be submitted for approval by the concerned authority. Make:- Kajaria/Somany/Orient bell

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, laid over and including sand cushion of 50mm thick, complete all as specified and directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. (b) The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation. Make:- Surya Kiran/NTC/NITCO

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and including sand cushion of 50mm thick, complete all as specified and directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. (b) The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation. Make:- Surya Kiran/NTC/NITCO

Material and Labour for precast cement concrete block type (1:2:4) type B-1, using 20mm graded crushed stone aggregate, as in bed blocks, kerbs etc set in cement mortar 1:4 including dismantling old kerb stone and removing out side defence land, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out in soft/loose soil, and removing surplus soil to a distance n exc 50m and making good bottom surface by watering and well ramming, complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, complete all as specified and directed.

Supply and Fixing, Rolled mild steel Fe 410-W (Gde-E-250) quality-A, as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated or required), complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

Dismantling fencing wire mesh any type and in any position complete all as specified and directed.

Supply and Fixing fabric fencing mesh of size 100mmx100mm made of GI wire of dia 3mm, PVC coated to achieve outer dia not less than 4mm in required colour and shade fixed on posts with nut and bolts including necessary drilling, bolting or riveting to steel complete all as specified and directed.

Material and labour for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc. including dismantling old barbed wire, complete all as specified and as directed.

Fixing only Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc. complete all as specified and as directed.

Supply and Fixing concertina coil 1000mm dia 1A tying with horizontally barbed wire with 0.9mm annealed binding wire, 2.64mm dia having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Part-I) with a low carbon steel strip punched tape 19mm wide, 0.50mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both sides of strips at regular interval conforming to IS-513 including dismantling existing concertina coil, complete all as specified and directed.

Taking down steel/iron gate area not exc 10Sqm each including hold fasts and re-fixing the gates in the same opening including shifting and fixing of existing holdfast in plain cement concrete 1:2:4 type B1 after raising the gate level including greasing, painting and other necessary minor repairs , complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, or in any position etc. and removal of rubbish outside MOD land and stacking of useful bricks/brick bats for credit, complete all as specified and directed

Material and labour, brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, built in CM (1:4), complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint at any height including necessary scaffolding, ladder etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, and removing to store for reuse or credit, complete all as specified and directed.

Supply and fixing mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Material and labour for applying one coats of synthetic enamel paint on old steel surfaces over 10cm width or girth, including preparation of old steel surface, complete all as specified and directed.

Demolition of RCC jallies/Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately), complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in louvres and jallies, 40mm thick (measured solid) set in cement mortar 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete on any description and in any position and thickness (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate, as in walls, retaining walls, basements walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. Note:-Use and waste of form work and reinforcement steel bars shall be measured and paid separately.

Material and labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter as in rough finished flat surfaces of concrete, complete all as specified and directed.

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 10m dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate, as in chajjas upto height 20 metre, complete all as specified and directed. Note:- Use and waste of form work and reinforcement steel bars shall be measured and paid separately.

Material and Labour for form work to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and directed.

Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) jointed and pointed in cement mortar, complete all as specified and directed.

Material and Labour for fly ash brick laid on side of drain using old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3, complete all as specified and directed.

Material and Labour for fly ash brick laid on edge of drain using old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3, complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregate, as in coping kneelers, apex stones, bed plates, kerbs etc including necessary form work, complete all as specified and directed.

Material and Labour for excavation/desludging/desilting as in liquid/dry mud foul conditions of any depth and cross section width 0.50m to 1.20m getting out from existing drain and cleaning the shrubs/grass from sides of drain including removing existing RCC cover slab of any size and resetting the same position and removing the sludge outside the defence land in covered container, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth (of cement concrete), using extra cement @ 3Kg/sqm, including forms, moulds, mitred / stopper ends etc., complete all as specified and directed.

Material and labour for raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs etc complete all as specified and directed.

Material and labour for flush pointing to bricks laid flats or side in cement mortar 1:4 as in drain/channels complete all as specified and directed.

Note:- Amount of credit of Rs. 34200.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

ASW ENTERPRISES

VARUN TRADERS

M/s Bhagwati Enterprises

M/S GOYAL ASSOCIATES

DHIMAN AND SONS

AS Enterprises

Azurite Engineering