Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹30.3 L+₹4.4 L (17.0%)Rejected-AOC SARDARPURA 1ST B ROAD NEAR HANUMAN JI KA MANDIR JODHPUR RAJASTHAN 342 003 | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L2 | Rejected-AOC Rejected being higher bidder | |
| 3 | L3₹31.4 L+₹5.5 L (21.2%)Rejected-AOC 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L3 | Rejected-AOC Rejected being higher bidder | |
| 4 | L4₹31.6 L+₹5.7 L (22.2%)Rejected-AOC | L4 | Rejected-AOC Rejected being higher bidder | |
| 5 | L5₹34.6 L+₹8.7 L (33.7%)Rejected-AOC | L5 | Rejected-AOC Rejected being higher bidder |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
20 Jun 2024, 6:00 pmClosed
GE AF JODHPUR
GE AF JODHPUR
REPAIR TO PCC FIRE LANE FIRE BOARD SHED FOOTPATH AND OTHER BR REPAIRS TO EM ASSETS AT AF STN JODHPUR
2024_MES_657169_1
8661/E8
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF JODHPUR
₹80,000
Yes
16 Jul 2024
1 Jun 2024
22 Jun 2024
1 Jun 2024
20 Jun 2024
8 Jun 2024
Amount
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engr-in-Charge.
Dismantling of steel of any type and removing from site complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and making good but portion ordered to be dismantled complete all as specified and as directed.
M&L for removing excavated materials/ demolished material of outside MOD land and depositing at a suitable place ascertained by the contractor at his own cost complete all as specified and directed by Engr-in-charge.
Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nanital or similar pattern roof coverings complete all as specified and as directed.
Dismantling of floor tiles including cement mortar bedding (but not backing) removing serviceable tiles to reuse and rubbish of premises complete all as specified and as directed.
Taking down steel gate of any design or section & refixing the same to same opening after necessary minor addition & alteration repairs welding etc complete all as specified and directed.
M&L for precast cement concrete1:2:4 type B1 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in coping, roof kerb complete all as specified and as directed by Engr-in-Charge.
M&L for mild steel angle iron and other steel section rolled mild steel for framed work as fencing posts and in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & flat iron fillets for security wire mesh etc, confirming to Fe 290 (Gde E-165) complete all as specified and as directed.
M&L for preparation of newly untreated surface of any description, over 10cm in width or girth, not otherwise described priming with red oxide, zinc chrome and applying two coat of synthetic enamel (ordinary tint) completed all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on block masonry including finish even and smooth (without using extra cement) complete all as specified and directed.
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile of 550 MPA as in roof covering/cladding to wall fixed with self tapping/ drilling screws complete all as specified and directed.
S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile of 550MPA as in roof covering/cladding to wall fixed with self tapping/ drilling screws complete all as specified and as directed.
Excavation in post holes (or similar holes) each n exc 0.5 cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earh around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) in fire lane,sub bases, floors and pavings including necessary arrangement for making construction/ dummy joint and filling with grade "B" compound completed all as specified and directed.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation, sub bas, filling and mass concrete completed all as specified and directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour ,design & pattern as in footpath, parks , lawns driveways or light traffic parking etc of required strength , thickness & size/shape , made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibrator ,filling the joints with fine sand and cutting of paver block as required size pattern, finishing and sweeping extra sand ,complete all as specified and directed.
All as item no 21 above but except interlock tiles complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including necessary earthwork and making drainage opening wherever required complete all as specified and as directed.
S&F PVC coated galvanised iron chain link fencing, made of GI wire dia not less than 3.5mm and minimum dia 4mm after PVC coating having 50x50mm mesh size to any type of standards rails, straining bolts etc including provision of binding wire, fixed as knuckled type and including taking down old fencing complete all as specified and directed.
S&F glazed ceramic coloured tiles of size 350x250x7mm /450x300x7/ 300x600x7mm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles, over and including 10 mm thick rendering in cement motor 1:4 complete all as specified and directed.
M&L for stone aggregate of size not exceeding 63mm deposited spread and leveled in layers not exceeding 15cm to a true surface of broken stones for E/M installations complete all as specified and directed.
Material & labour for preparation of old steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.
Material & labour for preparation of new concrete surface not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over and including a coat of primer including complete all as specified and directed.
M&L for 75 mm thick PCC(1:2:4) type B 2 (using 40mm graded stone aggregate) as in sub base to floors complete all as specified and directed.
M&L for factory made virified heavy duty parking tiles coloured, matt finish, unglazed and unpolished of size 300x 300x10mm thick laid over and including 15mm thick screed bed in CM (1:4) complete all as specificed and as directed.
S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specificed and as directed. (Note : Each line wire to be measured.)
M&L for restraining, resecuring including making good galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire etc complete all as specificed and as directed.
VIKAS CONSTRUCTION CO.
DEV INDUSTRIES
AAI NATH ENTERPRISES
D DEV COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .