REPAIR AND MAINT OF SOLAR WATER HEATING SYSTEM HOT WATER GENERATOR PLANT WATER DISINSFECTION PLANT MECHANICAL LAUNDRY PLANT INCLUDING CONNECTED WORKS AT VARIOUS INSTALLATIONS UNDER GE IMA DEHRADUN

Amount

Periodical servicing/maintenance of industrial Tumble dryer-T5675 of Electrolux- including taking down carefully all deffective parts, for repair/ servicing, comprising strip opening of plant,re-assembling & testing on load, complete all as directed by Engineer-in-Charge. Note:- (i) Fixing only of the new part(s)shall be deemed to be included on rates quoted by the contractor for this item and new parts shall be measured and paid separately as under supply only against respective items of 'BOQ'. (ii) Repair/replacement of deffective parts shall be done within 72 Hrs after intimatied by the Engineer-in-Charge. (iii) Once servicing of plant carried out by contractor will be responsible for entire contract preriod for replacing any other deffective part which falls under supply only catagory. (iii) Required T&P for lifting/shifting of plant is contractors own arrangement without any additional payment.(iv) The contractor shall maintain records of all kinds of maintenance to be carried out.

M&L for taking down defective electric motor from industrial Tumble dryer-T5675 of Electrolux make- after unscrewing nuts bolts of , 3 phase, 415/440 volts, 50 C/s, AC, of any make , shifting the same to workshop, strip opening after unscrewing nut bolts screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enamelled copper winding wire of appropriate size matching with manufactures design including replacement of all insulating materials such as glass paper ,leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size up to terminal connection box , varnishing, drying up and re-assembling refixing and reinstallation at site complete and testing on load all as specified and directed by Engineer-in-Charge. Note:- Required T&P and transportation shall be contractors responsibility. Repair/ replacement shall be done within a period as intimated by the Engr-in-Charge falling which necessary recovery as deemed fit shall be made.

Supply only Belt front and back (Set of two) of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Power supply control unit of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only I/o cord/PLC of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Contactor 32 Amps for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Contactor 40 Amps for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Heating element for dryer (Set of six) for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Supporting roller for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Sealing felt for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only CPU Controller Unit for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Door switch for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Door gasket for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Bearing for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Vaccume switch for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply only Transformer for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

S&F screw of drum mechanism as per existing type and size.

S&F cable set of contactor as per existing type and size.

Periodical servicing/maintenance of industrial washer extractor with microprocessor panel Make and model of plant W5330S of Electrolux- ,Including taking down carefully all deffective parts, for repair/ servicing, comprising strip opening of plant, re-assembling & testing on load, complete all as directed by Engineer-in-Charge. Note:- (i) Fixing only of the new part(s)shall be deemed to be included on rates quoted by the contractor for above item and new parts shall be measured and paid separately as under supply only against respective items of 'BOQ'. (ii) Repair/replacement of deffective parts shall be done within 72 Hrs after intimatied by the Engineer-in-Charge. (iii) Once servicing of plant carried out by contractor will be responsible for entire contract preriod for replacing any other deffective part which falls under supply only catagory. (iii) Required T&P for lifting/shifting of plant is contractors own arrangement without any additional payment.(iv) The contractor shall maintain records of all kinds of maintenance to be carried out.

M&L for taking down defective electric motor from industrial washer extractor Make and model of plant W5330S of Electrolux make of capacity 35 kg- after unscrewing nuts bolts of , 3 phase, 415/440 volts, 50 C/s, AC, of any make , shifting the same to workshop, strip opening after unscrewing nut bolts screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enamelled copper winding wire of appropriate size matching with manufactures design including replacement of all insulating materials such as glass paper ,leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size up to terminal connection box , varnishing, drying up and re-assembling refixing and reinstallation at site complete and testing on load all as specified and directed by Engineer-in-Charge. Note:- Required T&P and transportation shall be contractors responsibility. Repair/ replacement of shall be done within a period as intimated by the Engr-in-Charge falling which necessary recovery as deemed fit shall be made.

Supply only Non Return Valve of Industrial Washer Extractor Machine as per existing type and size.

Supply only Main motor pulley of Industrial Washer Extractor Machine as per existing type and size

Supply only temperature sensor with cable of Industrial Washer Extractor Machine as per existing type and size.

Supply only Water level sensor with pipe of Industrial Washer Extractor Machine as per existing type and size.

Supply only water solenoid valve of Industrial Washer Extractor Machine as per existing type and size.

Supply only Chemical valve of Industrial Washer Extractor Machine as per existing type and size.

Supply only Water inlet hose pipe wtih suitable size of clamps of Industrial Washer Extractor Machine as per existing type and size.

Supply only electrical drain valve.

Supply only Contactor 32 Amps for Industrial Washer Extractor Machine as per existing type and size.

Supply only Heating element 6.6 KW for Industrial Washer Extractor Machine as per existing type and size.

Supply only stainless screw M6X12 of outer drum unit as per existing type and size

Supply only ront door lock as per existing type and size

Supply only front door gassket EPDM black as per OEM design complete all as specified and as directed.

Supply only hinged joint of door as per OEM design complete all as specified and as directed.

Supply only Lock shaft assy of door as per existing type and size

Supply only ribbed belt of electric motor as per existing type and size

Supply only motor control unit (VFD) with invertor assy complete 3 phase 440 volt AC motor as per existing type and size

Supply only Valve of steam section as per existing type and size

Servicing/maintenance of industrial flat work rotary ironer running chest size 2.0 mtr long IC 43320 of Electrolux make- ,including taking down carefully all deffective parts, for repair/ servicing, comprising strip opening of plant, re-assembling & testing on load, complete all as directed by Engineer-in-Charge. Note:- (i) Fixing only of the new part(s)shall be deemed to be included on rates quoted by the contractor for above item and new parts shall be measured and paid separately as under supply only against respective items of 'BOQ'. (ii) Repair/replacement of deffective parts shall be done within 72 Hrs after intimatied by the Engineer-in-Charge. (iii) Once servicing of plant carried out by contractor will be responsible for entire contract preriod for replacing any other deffective part which falls under supply only catagory. (iii) Required T&P for lifting/shifting of plant is contractors own arrangement without any additional payment. (iv) The contractor shall maintain records of all kinds of maintenance to be carried out.

Supply only Control panel as per existing type and size

Supply only Temprature sensor as per existing type and size

Supply only Trim as per existing type and size

Supply only Ironing strip as per existing type and size

Supply only Temprature sensor secondry as per existing type and size

Supply only Temprature sensor safty as per existing type and size

Annual servicing/maintenance of industrial vaccum finish iron table 1200mmX750 mm complete with steam genarator of Fabcare make. including taking down carefully all deffective parts, for repair/ servicing, comprising strip opening of plant, re-assembling & testing on load, complete all as directed by Engineer-in-Charge complete all as directed. Note:- (i) Fixing only of the new part(s)shall be deemed to be included on rates quoted by the contractor for above item and new parts shall be measured and paid separately as under supply only against respective items of 'BOQ'. (ii) Repair/replacement of deffective parts shall be done within 72 Hrs after intimatied by the Engineer-in-Charge. (iii) Once servicing of plant carried out by contractor will be responsible for entire contract preriod for replacing any other deffective part which falls under supply only catagory. (iii) Required T&P for lifting/shifting of plant is contractors own arrangement without any additional payment.(iv) The contractor shall maintain records of all kinds of maintenance to be carried out.

Supply only as teflon pad of iron machine of 150mmx230mm size per OEM design complete all as specified and as directed.

Supply only heating element shoe of iron machine single phase 900 watt 230 volt ISI mark as per OEM design complete all as specified and as directed.

Supply only heating element 'U' shape for iron table single phase 3.0 KW 230 volt ISI mark as per OEM design complete all as specified and as directed.

Supply only heating element of steam vessel single phase 3 KW cap ISI mark as per OEM design complete all as specified and as directed.

Supply only Aluminium shoes of iron machine ISI mark as per OEM design complete all as specified and as directed.

Supply only steam rubber pipe of 10kg pressure 3 mtr long nylon embeded of iron machine ISI mark as per OEM design complete all as specified and as directed.

Supply only pressure gauge of steam tank of 10kg pressure rating ISI mark as per OEM design complete all as specified and as directed.

Supply only contactor 4 pole single phase 25 amp cap of of iron machine steam tank of 10kg pressure rating ISI mark as per OEM design complete all as specified and as directed.

Supply only single phase,230volt water level controller switch of steam vessel ISI mark as per OEM design complete all as specified and as directed.

Supply only steam solonoid valve 1/2' cap 230 volt single phase of steam vessel ISI mark as per OEM design complete all as specified and as directed.

Supply only pressure switch 1/2' cap 230 volt single phase of steam vessel ISI mark as per OEM design complete all as specified and as directed.

Supply only single phase micro switch of paddlel ISI mark as per OEM design complete all as specified and as directed.

S&F single phase rocker switch 15 Amp cap ISI mark as per OEM design complete all as specified and as directed.

Supply and fix in replacement Wall mounting industrial socket 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protected make C&S cat part No CS 63249 or equivalent in ABB,Legrand complete all as directed.

Supply and fix in replacement Wall mounting industrial plug 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protected make C&S cat part No CS 61048 or equivalent in ABB,Legrand complete all as directed.

Supply and fix in replacement of MCCB 4 pole 63 Amp cap,Thermal Magnetic release conforms to IS/IEC 60947-2 breaking cap 36kA suitable for isolation ,adjustable overload from 0.67 to 1.0In, adjustable short circuit setting from 6.0 to 12 x Ir inbuilt earth fault protection make L&T, C&S, ABB,Legrand,Seimens,Havells complete all as directed.

M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Through Cleaning of Drain valve of Washer extracrtor after unplug from plant by technically skilled person and refix the same every after 15 days complete all as specified and as directed.

Through Cleaning of Filter hatch of tumble dryer after unplug from plant by technically skilled person and refix the same every after 15 days complete all as specified and as directed.

Taking down defective electric driyer motor from driyer of any make , shifting the same to workshop, strip opening after unscrewing nut bolts screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enamelled copper winding wire of appropriate size matching with manufactures design including replacement of all insulating materials such as glass paper ,leathered paper, super enameled copper conductor wire connection leads of appropriate size with sleeves of suitable size up to terminal connection box , varnishing, drying up and re-assembling refixing and reinstallation in plant including replacement of bearing and leathe work and complete and testing on load all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement, PVC insulated,un-armoured, heavy duty electric power cable 6 Sqmm 4 core copper conductor, 1100 volts grade, etc complete all as specified and directed.

Strip opening and descalling/gaswelding of water collector of Solar panel 1500 Ltrs/day capacity over rooftop of 3 rd floor or fixed in ground, fins/tubes from inside, (vertical type) cleaning with concentrate acid in fix ratio and repair /copper welding (soldering) of panel including replacement of rubber washer 2 Nos of thickness 3 mm, and arresting of detecting possible leakage reassembling and reinstallation at over OTM buildings with OEM approved manufacturer complete all as specified and directed

S&F in replacement of Toughened/Texture glass of 3.2 mm thick having transmission more than 85 % including coonected rubber/nut botl/nickle cladding etc in the existing solar panel

S&F heating element for solar water heating system of cap 3 KW

S&F thermostat control for electrical back up.

S&F EPDM rubber gasket for solar collector.

M&L for insulation for GI pipe with glass wool 30mm thick with and including applying bituminous compound and aluminium cladding of sizes 20 mm dia.

M&L for insulation for GI pipe with glass wool 30mm thick with and including applying bituminous compound and aluminium cladding of sizes 25 mm dia.

Day to day maintenance and inspection of chlorine dosing plant at various water supply installation inside the complex ,alongwith replacement of deffective parts of dosing plant i.e injector assembly, connecting pipes and valve of each plant including strip opening of chloronome plant and replacement of all defective parts, washers by employing one skilled mechanic to achieve satisfactory residual chlorine result at user end from 09:00 hrs to 17:00 hrs during every working day. Note :-(I) Non attending complaint of chloronome plant is subject to a recovery of Rs 250.00 per plant per day will be recovered while claiming the payment. (ii) Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

Supply and pouring Orthotoline Solution in 500 Ml Bottle Note:- Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Supply and fix in replacement,high pressure transparent type Suction/Discharge PVC pipe 3/8 '' dia outer of chloronome plant, as per OEM complete all as specified and as directed.

Taking down defective electric motor of dosing motor 1 HP cap and supply and fix in replacement of dosing motor 1 HP cap squirrel cage type single phase 230 volt 50 Hz cap re-installation at site complete and testing complete all as specified and as directed by Engineer-in-Charge. Make:- Kirloskar, Crompton,Pearl filter

M&L for taking down defective electric motor of dosing motor 1 HP cap disconnecting delivery pipe line repair/overhauling 1 HP, AC 230 volts opening into parts cutting of burnt winding, cleaning, slots, balancing of rotor, cleaning polishing and rewinding with same gauge of PVC insulated copper wire, replacement of impeller pressure switch and cleaning including testing complete all as specified and directed. Make:- Kirloskar, Crompton,Pearl filter

Supply only spare parts for Dosing cum feeding pump of chloronome plant, gear type of cap 40 Gallon/per day Make:- Declibac/Perls Filter and potter and watts to be incorporated in the work.:-

Rotor assembly with bearing brackets and tollerance rings

Coil assembly 250V 50 Hz

Single head feed rate control with shaft

Pump Head ( Ferrules 1/4'' and duckbill included)

Roller assebly set of 4

Pump Tube (Set of Five)

Injection Check Valve 3/8" (Set of Five)

Weighted suction line strainer 3/8"

Ferrule 1/4" (set of 24)

Check valve for Duckbill (Set of 5)

PCB as per existing type and size

PCB Plate as per existing type and size

Diafram as per existing type and size

Ajitator as per existing type and size

(p) connecting nut 3/8" mail & female Note : Make of spare parts mentioned in (a) to (o) above shall be Declibac or Pearls filter as per ground requirement.

Supply and pouring of Calcium Hypo Chlorite 65-70% chlorine content in granular form disinfectant for water treatment packed in 45 Kg Drum in the service tank of chlorine dosing plant . Make: sree Rayalaseema Hi- srength Hypo Ltd or E-in-C Approved. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days complete with manufacturers test certificate.

Supply and pouring copper sulphate for water treatment as approved by GE. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Supply and pouring Alum crystal type in swimming pool for agitation and water treatment as approved by GE. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Testing of water from NABL approved testing lab for 27 standard parameters from Pump House ,bore well in different locations at under GE IMA Dehradun complete all as specified and directed .

M&L in repairs of VALVE, SOLENOID 1/2" BSP of Boiler Plant as per existing type and size

M&L in repairs of RECTIFIER-110-240V,AC / 180 DC, SKB 25,SIMICRON of Boiler Plant as per existing type and size

M&L in repairs of CAP RUBBER for photocell of Boiler Plant as per existing type and size

M&L in repairs of THERMOMETER 0-600 DEG,100 MM DIAL of Boiler Plant as per existing type and size

M&L in repairs of HOSE METALLIC BRAIDED 3/8" x 40" LG of Boiler Plant as per existing type and size

M&L in repairs of HOSE METALLIC BRAIDED 3/8" x 50" LG of Boiler Plant as per existing type and size

M&L in repairs of BURNER ROD OBT 50- 352 MM LONG of Boiler Plant as per existing type and size

M&L in repairs of HOOTER ROUND of Boiler Plant as per existing type and size

M&L in repairs of SEALS SET of Boiler Plant as per existing type and size

M&L in repairs of THERMOMETER 0-600 DEG,100 MM DIAL of Boiler Plant as per existing type and size

M&L in repairs of PRESSURE GAUGE , 0 TO 40 KG 68 MM, 1/4" BSP BOTTOM CONNECTION of Boiler Plant as per existing type and size

M&L in repairs of NOZZLE BYPASS ASSEMBLY40 GPH 2 MM ORIFICE of Boiler Plant as per existing type and size

M&L in repairs of CONTINUOUS CURRENT MAGNET 180 V,DC of Boiler Plant as per existing type and size

M&L in repairs of ELECTRODE 800 MM LONG of Boiler Plant as per existing type and size

M&L in repairs of ELECTRODE CAP WITH HT CABLE of Boiler Plant as per existing type and size

M&L in repairs of NOZZLE HOLDER of Boiler Plant as per existing type and size

M&L in repairs of SEQUENCE CONTROLLER LAL 2.25 WITHOUT BASE PLATE of Boiler Plant as per existing type and size

M&L in repairs of PHOTORESISTOR QRB 3 of Boiler Plant as per existing type and size

Supply only PH Correction chemical for softener plant

Supply only Sodium Chloride for softener plant

The service charges for the service visit for checking of hot water generator/ thermic fluid heater

S&F of First Aid Box of size 30x15x5 cm made out of GI sheet 2.0 mm thick including all standard medical treatment equiptment compleate all as specified

KRISHANA ELECTRIC WORKS

M/s Anamika Enterprises