Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.3 LAccepted-AOC | 1 | Accepted-AOC AWARDED BEING THE LOWEST TENDERER | |
| 2 | 2₹30.4 L+₹89,470 (3.04%)Rejected-Finance | 2 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 3 | 3₹32.4 L+₹3.0 L (10.0%)Rejected-Finance | 3 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 4 | 4₹34.6 L+₹5.1 L (17.4%)Rejected-Finance | 4 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 5 | 5₹34.8 L+₹5.3 L (18.0%)Rejected-Finance | 5 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Jan 2023, 6:00 pmClosed
GARRISON ENGINEER NAVAL BASE VISAKHAPATNAM
Garrison Engineer (Naval Base) Nausenabaugh Gandhigram PO Visakhapatnam 530 005
PAINTING AND POLISHING TO WOODEN AND STEEL FURNITURE (FD/TP) AND ITS UPKEEP FOR INSPECTION IN UNIT OTMS UNDER GE (NB) VISAKHAPATNAM
2022_MES_567460_1
C/8115/22-23/E8 / Token 83 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
VISAKHAPATNAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER NAVAL BASE
₹90,000
Yes
20 Jan 2023
5 Dec 2022
4 Jan 2023
5 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
M & L for preparation of old painted steel surface of Almirah Large Steel with shelves by scraping out the old paint by applying paint remover solution, with emary paper, filling metal putty to the uneven surfaces and sanding it again to make the surface smooth and then wipe out the surface and remove the all dust etc with a fine cloth and applying spray painting with two coats of hammer tone paint of approved quality as per existing shade externally and internally after applying and drying one coat of metal primer complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user's requirement) (Drg No. FD-67(M)/351/1031)
All as per Serial item No. 01 above but for Almirah Large steel (Drg No. FD/E6/MAP/18) complete ditto
All as per Serial item No. 01 above but for Almirah med steel with shelves (DRG.NO. FD-67(M), 114, 243, 350 & 1032) complete ditto
All as per Serial item No. 01 above but for Book case steel (DRG.NO. FD-45/90 /1028/1047) complete ditto
All as per Serial item No. 01 above but for Bed Hard (DRG.NO. FD/E6/MAP/8(R)) complete ditto
All as per Serial item No. 01 above but for Chair Verandah (DRG.NO. FD/E6/MAP/11) complete ditto
All as per Serial item No. 01 above but for Chair Verandah (DRG.NO. FD-19/359/FD/MAP-II/07) complete ditto
All as per Serial item No. 01 above but for Chair school with hand board (DRG.NO. FD/E6/MAP/05) complete ditto
All as per Serial item No. 01 above but for Charpoy Folding with hard Top (DRG.NO. FD-388/388(R) /1119) complete ditto
All as per Serial item No. 01 above but for Charpoy with Hard Top (DRG.NO. FD/MAP-II/01) complete ditto
All as per Serial item No. 01 above but for Locker Bed side steel (DRG.NO. FD-257/1029/SD-104) complete ditto
All as per Serial item No. 01 above but for Locker 4 units (DRG.NO. FD-127/127(M)) complete ditto
All as per Serial item No. 01 above but for Locker 6 units (DRG.NO. FD-127/127(M)) complete ditto
All as per Serial item No. 01 above but for Locker metal clothing with 8 lockers (DRG.NO. FD-127(M)) complete ditto
All as per Serial item No. 01 above but for Table with drawers steel 900x600mm (DRG.NO. FD-1008) complete ditto
All as per Serial item No. 01 above but for Table 900x900x600mm with out drawer (Steel) (DRG.NO. FD-1007) complete ditto
All as per Serial item No. 01 above but for Table office clerk steel DRG.NO. FD-84/84(M)/1004) complete ditto
All as per Serial item No. 01 above but for Table office officer steel DRG.NO. FD-84/84(M)/1003 /1002) complete ditto
All as per Serial item No. 01 above but for Table steel general 1219x711x762 DRG.NO. GE(NB)/V/1582) complete ditto
All as per Serial item No. 01 above but for Table bed side steel (DRG.NO. FD-157/157(M)) complete ditto
All as per Serial item No. 01 above but for Rack steel 1830x760x1905mm (DRG.NO. FD-129(M)) complete ditto
All as per Serial item No. 01 above but for Rack steel adjustable closed type with shelves 3025x900x500 (DRG.NO. TP) complete ditto
All as per Serial item No. 01 above but for Rack steel 4 spaces (DRG.NO. FD-97) complete ditto
All as per Serial item No. 01 above but for Rack side steel 3 spaces with tray (DRG.NO. FD-97) complete ditto
All as per Serial item No. 01 above but for Rack stationery steel (DRG.NO. FD-81/81(M)) complete ditto
All as per Serial item No. 01 above but for Stool steel (DRG.NO. FD-81/81(M)) complete ditto
All as per Serial item No. 01 above but for Chair steel tubular with arms (DRG.NO. FD-75(M)) complete ditto
All as per Serial item No. 01 above but for Chair steel tubular without arms (DRG.NO. FD-75(M)) complete ditto
All as per Serial item No. 01 above but for Teapoy Varandah (DRG.NO. FD-35/255/383, FD/E6/MAP/17) complete ditto
All as per Serial item No. 01 above but for Rack shoe steel (DRG.NO. FDE6/MAP/02 & FD/E6/MAP/02(R)) complete ditto
All as per Serial item No. 01 above but for Table steel 900x900x760mm with sunmica top (DRG.NO. FD-1009) complete ditto
Material and labour for polishing to Almirah Large Wooden 1/2H 1/2 Shelves (Drg No. DB-4049/4149) by adhering to following steps complete all as specified and as shown on drawing:- a) The wooden surfaces shall be made smooth by sanding the surface with sand paper of about 120 grit in the direction of grains of wood. b) Repeat the process with progrssively finner grains with 180-220 grit sanding paper to make the surface more finer. c) Wipe out the surface and remove the dust with a fine cloth. d) Examine the surface and fill yellow oxide or wood filler/putty in the holes and sand the surface again to achieve a smooth and cleaner surface. e) Wipe it again with cloth and apply a coat of french polish and let it dry. f) Sand the surface again and apply next coat with a soft brush or cloth. g) Let the surface dry completely and apply a clear coat over it for glossy finish surface. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user requirement)
All as per Serial item No. 32 above but for Almirah large wooden with shelves (Drg No. DB-4116) complete ditto
All as per Serial item No. 32 above but for Almirah medium with shelves wooden. Drg No. DB-3959/FD-19) complete ditto
All as per Serial item No. 32 above but for Almirah medium wooden 1/2 1/2 shelves (Drg No. DB-4042) complete ditto
All as per Serial item No. 32 above but for Bed plywood top (Drg No. FD-213/246) complete ditto
All as per Serial item No. 32 above but for Bench SK (Drg No. CWE/F/SK/263) complete ditto
All as per Serial item No. 32 above but for Bench wooden 910mm x 275mm (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Bench wooden of size 910mm x 320mm (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Bench wooden of size 910mm x 330mm (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Book Case wooden (Drg No. DB-4821/FD-45(M)) complete ditto
All as per Serial item No. 32 above but for Book shelves open large (Drg No. DB-4121) complete ditto
All as per Serial item No. 32 above but for Book shelves open small (Drg No. DB-4121/FD-228) complete ditto
All as per Serial item No. 32 above but for Board Notice 900mm x 600mm Drg No. FD-117(M)) complete ditto
All as per Serial item No. 32 above but for Board Notice 1200mm x 900mm (Drg No. FD-1/117) complete ditto
All as per Serial item No. 32 above but for Board Notice 1500mm x 1200mm (Drg No. DB-3957) complete ditto
All as per Serial item No. 32 above but for Bench (Drg No. SK/CWE/F258R) complete ditto
All as per Serial item No. 32 above but for Bin Soiled linen (Drg No. FD-15(M)/70/244/212) complete ditto
All as per Serial item No. 32 above but for Chair Dining (Drg No. FD-16(M)/228/279) complete ditto
All as per Serial item No. 32 above but for Chair Dining with cushion (Drg No. FD/E6/MAP/10(R) & FD/MAP-II/04) complete ditto
All as per Serial item No. 32 above but for Chair wooden bottom without arms (Drg No. FD-56(M)/ 225/285) complete ditto
All as per Serial item No. 32 above but for Chair Writing (Drg No. FD-20/202/250 /280) complete ditto
All as per Serial item No. 32 above but for Chair CB Office (Drg No. DB-4124) complete ditto
All as per Serial item No. 32 above but for Chair Easy (Drg No. FD-17(M)/201/229) complete ditto
All as per Serial item No. 32 above but for Chair wooden (Drg No. CWE(P)/V/SK-02) complete ditto
All as per Serial item No. 32 above but for Desk (Drg No. CWE/F/SK/263 & CWE/F/258(R)) complete ditto
All as per Serial item No. 32 above but for Desk (Drg No. FD-107(M)) complete ditto
All as per Serial item No. 32 above but for Desk small for school children (Drg No. FD-124(M)) complete ditto
All as per Serial item No. 32 above but for Desk with seat (Drg No. SK-940(R) ) complete ditto
All as per Serial item No. 32 above but for Desk wooden of size 910 x 350 x 620 (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Desk wooden of size 910 x 420 x 780mm (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Desk wooden of size 910 x 430 x 810mm (Drg No. TP) complete ditto
All as per Serial item No. 32 above but for Desk wooden for KG Class (Drg No. CWE/(P)/V/SK-01) complete ditto
All as per Serial item No. 32 above but for Hat stand with mirror (Drg No. FD-23(M)/206/ 233/DB-3978) complete ditto
All as per Serial item No. 32 above but for Locker wooden (Drg No. FD-54/222) complete ditto
All as per Serial item No. 32 above but for Rack side 4 spaces wooden (Drg No. DB-4124) complete ditto
All as per Serial item No. 32 above but for Rack side 3 spaces wooden (Drg No. FD-26(M)/DB-4123) complete ditto
All as per Serial item No. 32 above but for Side board (Drg No. FD-26/241/372) complete ditto
All as per Serial item No. 32 above but for Stool dressing (Drg No. FD-27(M)/ 252) complete ditto
All as per Serial item No. 32 above but for Stool dressing with cushion (Drg No. FD/E6/MAP/14) complete ditto
All as per Serial item No. 32 above but for Sofa set to seat five (Five pieces) (Drg No. FD-281/373/ FD/MAP/II/02) complete ditto
All as per Serial item No. 32 above but for Sofa set to seat four (four pieces) (Drg No. FD- 281/373/FD/MAP/II/02) complete ditto
All as per Serial item No. 32 above but for Table dining for 08 persons (Drg No. FD-30(M)/239/273/FD/MAP-II/03) complete ditto
All as per Serial item No. 32 above but for Table dining for 06 persons (Drg No. FD-30(M)/239/273/FD/MAP-II/03) complete ditto
All as per Serial item No. 32 above but for Table dining 1500 x 900 x 760mm (Drg No. FD/MAP-II/03) complete ditto
All as per Serial item No. 32 above but for Table writing (Drg No. FD-33(M)/249/275) complete ditto
All as per Serial item No. 32 above but for Table writing medium (Drg No. DB-3982) complete ditto
All as per Serial item No. 32 above but for Table 3' x 2' without drawer (Drg No. FD-23/42(M)/ 284) complete ditto
All as per Serial item No. 32 above but for Table 3' x 2' with drawer (Drg No. FD-41(M)/ 224/223/283) complete ditto
All as per Serial item No. 32 above but for Table dressing gents with mirror (Drg No. FD-31/230/294 & FD/E6/MAP/16) complete ditto
All as per Serial item No. 32 above but for Table dressing ladies with mirror (Drg No. FD-32(M)/251) complete ditto
All as per Serial item No. 32 above but for Teapoy (Drg No. FD-34(M)/ 232/278/382) complete ditto
All as per Serial item No. 32 above but for Table Peg (Drg No. FD-236/277/384) complete ditto
All as per Serial item No. 32 above but for Table centre (Drg No. FD-29(M)/ 235/274) complete ditto
All as per Serial item No. 32 above but for Table bed side (Drg No. FD- 248/276) complete ditto
All as per Serial item No. 32 above but for Table 3' x 2' for Hav/Ors (Drg No. FD-55(M)/ 223/291) complete ditto
All as per Serial item No. 32 above but for Table 3'x3' (Drg No. DB- 3955/FD-291) complete ditto
All as per Serial item No. 32 above but for Table 5'x2'-10' (1520 x 860 x 760mm) (Drg No. FD-139) complete ditto
All as per Serial item No. 32 above but for Table conference library (Drg No. FD-8(M)) complete ditto
All as per Serial item No. 32 above but for Wooden decorative chair dining wih cushion (Drg No. TP) complete ditto
M & L for repair to SETEE 4 SEATER by Removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:- (i) Replacement of Base rubber foam of 4 inch thick of size 1800x600mm (ii) Replacement of Back rubber foam of 3 inch thick of size 1800x500mm (iii) Replacement of synthetic cottons of wight 5 Kgs (Approx) (iv) Replacement of tapestry cloths for Base Nd Back rest with Leatherite Tapestry cloth of costing not less than Rs. 350.00 Per RM (v) Material and labour for polishing the exposed wooden surfaces with one or more coats of malamine polish after preparation of surfaces by sanding filling holes etc with wood filler/putty complete all as specified. (Drg No. TP-Nugift)
M & L for repair to SETEE 3 SEATER by Removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:- (i) Replacement of Base rubber foam of 4 inch thick of size 1350x600mm (ii) Replacement of Back rubber foam of 3 inch thick of size 1350x500mm (iii) Replacement of synthetic cottons of wight 3 Kgs (Approx) (iv) Replacement of tapestry cloths for Base Nd Back rest with Leatherite Tapestry cloth of costing not less than Rs. 350.00 Per RM (v) Material and labour for polishing the exposed wooden surfaces with one or more coats of malamine polish after preparation of surfaces by sanding filling holes etc with wood filler/putty complete all as specified. (Drg No. TP-Nugift)
M & L for repair to SETEE 2 SEATER (CORNER TYPE) by Removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:- (i) Replacement of Base rubber foam of 4 inch thick of size 900x600mm (ii) Replacement of Back rubber foam of 3 inch thick of size 900x500mm (iii) Replacement of synthetic cottons of wight 2.5 Kgs (Approx) (iv) Replacement of tapestry cloths for Base Nd Back rest with Leatherite Tapestry cloth of costing not less than Rs. 350.00 Per RM (v) Material and labour for polishing the exposed wooden surfaces with one or more coats of malamine polish after preparation of surfaces by sanding filling holes etc with wood filler/putty complete all as specified. (Drg No. TP-Nugift)
M & L for repair to SOFA 5 SEATER LEATHERITE by Removing the following unserviceable components carefully without damaging the adjacent parts, tightening the entire frame using nails/screws etc and carry out the following works in sequence complete all as specified, shown on drawing and as directed:- (i) Replacement of Leatherite cover, best quality of costing not less than 550.00 per RM for all seat (3+1+1) (total 30m each set) (ii) Replacement of Base cool foam of 40 density of size 1500x450mm (iii) Replacement of Back cool foam of 40 density of size 1500x450mm (iv) Replacement of synthetic cottons of wight 10 Kgs (Approx) (v) Replacement of elastic Tape roll - 02 Nos (vi) Replacement of brown marking cloth for back side duly stiched - 08m (Aprox) (Drg No. TP-Godrej Model Parto)
M & L for repair to CHAIR PUSH BACK MID BACK by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth from Seat and replacing the same with new tapestry cloth of approved colour and texture of size 1.25x0.61m of cost not less than Rs. 200.00 per RM and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR PUSH BACK MID BACK by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth from Back and replacing the same with new tapestry cloth of approved colour and texture of size 1.50x0.61m of cost not less than Rs. 200.00 per RM and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR PUSH BACK MID BACK by taking down/removing the existing broken /unserviceable Torn out Foam from Seat and replacing the same with new Foam of size 520x450x100mm of 32 density and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR PUSH BACK MID BACK by taking down/removing the existing broken /unserviceable Torn out Foam from Back and replacing the same with new Foam of size 700x450x100mm of 32 density and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR PUSH BACK MID BACK by painting to old steel surfaces by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR PUSH BACK MID BACK by cleaning existing PU arm rest by using buffer machine to remove all dirt/stains etc and wash with water complete all as directed by the Engr-in-Charge. (Drg No. TP-Godrej Model Glamour)
M & L for repair to CHAIR AUDITORIUM MB by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth from Seat and replacing the same with new tapestry cloth of approved colour and texture of size 1.25x0.61m of cost not less than Rs. 200.00 per RM and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Audi III)
M & L for repair to CHAIR AUDITORIUM MB by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth from Back and replacing the same with new tapestry cloth of approved colour and texture of size 1.50x0.61m of cost not less than Rs. 200.00 per RM and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Audi III)
M & L for repair to CHAIR AUDITORIUM MB by taking down/removing the existing broken /unserviceable Torn out Foam from Seat and replacing the same with new Foam of size 450x490x75mm of 32 density and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Audi III)
M & L for repair to CHAIR AUDITORIUM MB by taking down/removing the existing broken /unserviceable Torn out Foam from Back and replacing the same with new Foam of size 450x520x75mm of 32 density and fixed complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Audi III)
M & L for repair to CHAIR AUDITORIUM MB by painting to old steel surfaces by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. TP-Godrej Model Audi III)
M & L for repair to CHAIR AUDITORIUM MB by taking down/removing the existing broken /unserviceable arm rest and replacing the same with new PU arm rest complete all as per the exisitng size and specification complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej Model Audi III)
VINAYAK BUILDTECHS
M/s REETA ENTERPRISES
Chitturi Associates
M/s.Kissenlal Daga
K APPAJI KUMAR AND CONSTRUCTIONS
Mahesh Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .