Loading…
Loading…
Tender Value
₹18.7 L
EMD Value
₹15 L
Closing Date
5 Jun 2026, 6:00 pmDue today
Executive Engineer, R&B Division, Vav –Tharad
Maintenance & Repairing of various Residential & Non-Residential Building Under R&B Sub Division Deodar Dist- Vav - Tharad (Pro. Flooring ,Pro. & Rep. Door / Window, Colour work, Brick Work - Plaster Work, Plumbing work, Furniture Work & all other Work)( Annual rate)
309227
08 of 2026-27
Open
AMC/Maintenance Contracts
Wav - Tharad
11 documents required · 11 mandatory
₹1,500
Executive Engineer, R and B Division, Vav- Tharad
₹15 L
27 May 2026
27 May 2026
27 May 2026
5 Jun 2026
27 May 2026
Name of Work :- Mainantance & Reparing of various Residential & Non-Residential Building Under R&B Sub Division Deodar
Dist- Vav - Tharad (Pro. Flooring,Pro. & Rep. Door / Window,Colour work,Brick Work - Plaster Work,Plumbing work, Furniture
Work & all other Work)( Annual rate)
Estimeted Rate (In Rs.)
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
1 Providing and fixing 1200mmx600mm (OR Rupees Two
600x600 mm size) Carveying MAT/ glossy tiles Thousand Two
with cutting design & labour charges etc Sq.mt. 1.00 2221.13 Hundred Twenty One
complete as directed by Engineer in charge. And Paise Thirteen
2 Providing and laying (IB:ZA) PIERA-GREY
FOSSIL grey (high glossy) laxure surface stone
16mm thick with sandwhich border incl. half Rupees Eleven
molded front perefery edge fixed in wall & jointed Thousand Seven
with grey cement slurry including rubbing and Hundred And Paise
polishing etc complete as directed by Engineer in Seventeen Only
3 Providing and laying white glazed tiles 6mm thick
in flooring treads of steps and landing laid on a
Rupees Nine Hundred
bed of 12mm thick cement mortar 1:3 (1-cement :
Sq.mt. 1.00 955.41 Fifty Five And Paise
3-coarse sand ) finishing with flush pointing in
white cement. (upto 10 ton)
4 Providing and laying Ceramic tiles 6mm thick in
flooring treads of steps and landing laid on a bed
Rupees Nine Hundred
of 12mm thick cement mortar 1:3 (1-cement : 3-
Sq.mt. 1.00 987.14 Eighty Seven And
coarse sand ) finishing with flush pointing in white
Paise Fourteen Only
cement. (upto 10 ton)
5 Providing and laying white/ Colour glazed tiles
60cm x 30 cm size & 6mm thick in skrting risers Rupees One
of steps and dedo on 10mm thick cement plaster Thousand Six Hundred
1:3 (1-cement : 3-coarse sand) and jointed with Sq.mt. 1.00 1631.59
Thirty One And Paise
white cement slurry Fifty Nine Only
6 Providing and layingCeramic tiles 6mm thick in
skrting risers of steps and dedo on 10mm thick
cement plaster 1:3 (1-cement : 3-coarse sand)
Sq.mt. 1.00 1000.51 Thousand And Paise
and jointed with white cement slurry (upto 10 ton)
7 Providing and laying polished Kota stone slab
flooring over 20mm (Average) thick base of
cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid
Thousand Eighteen
over and jointed with grey cement slurry mixed Sq.mt. 1.00 1018.88
And Paise Eighty Eight
with pigment to match the shade of slab including
rubbing and polishing etc. complete. (A) 25mm
thick (upto 10 ton)
8 Providing and laying cement concrete flooring
1:2:4 (1-cement : 2-coarse sand : 4-graded stone
Rupees Two Hundred
aggregate 20mm nominal size) laid in one layer
Sq.mt. 1.00 298.99 Ninety Eight And Paise
and finished with a floating coat of neat cement.
Ninety Nine Only
(A) 40mm thick. (upto 10 ton)
9 P & L 24" x 24" vitrified 8 mm thick tile flooring
over 20 mm (average) base of cement mortar 1:6
( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material
including dismentaling of existing flooring and
Sq.mt. 1.00 1467.72 Hundred Sixty Seven
jointed with color cement slurry including finised
And Paise Seventy
with flush pointing & cleaning the surface etc.
complete for antiskit (upto 10 ton)
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 1 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
10 P & L 24" x 24" vitrified 8 mm thick tile flooring
over 20 mm (average) base of cement mortar 1:6
( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material
including dismentaling of existing flooring and
Sq.mt. 1.00 1344.58 Hundred Forty Four
jointed with color cement slurry including finised
And Paise Fifty Eight
with flush pointing & cleaning the surface etc.
complete for light shade (upto 10 ton)
11 Providing & Laying Vetrified granite tiles 8mm to Rupees One
10mm thick in skirting risers of steps and dedo Thousand Five
on 10mm thick cement plaster in 1:3 in white Sq.mt. 1.00 1531.82 Hundred Thirty One
ceand jointed with white cement slurry And Paise Eighty Two
12 Providing and fixing Machine cut free edges,
Double Side machine polished Kota Stone for
shelves in cupboard and walls in single piece (
Maximum 150) 25mm thick including cutting Rupees Nine Hundred
grooves in walls and fixing the stone with neat Sq.mt. 1.00 999.90 Ninety Nine And Paise
cement slurry in true line and level and making Ninety Only
good the groove with CM 1:3 as directed etc
complete (A) 25mm thick
13 Providing and laying Single side mirror polished
Granite marble stone slab 15 to18 mm (Average)
Sil & Jams for Window thick of approved quality Rupees Three
incl. full moulded round front edge fixed in wall for Thousand Two
partition and jointed with grey cement slurry Hundred Two And
including rubbing and polishing etc.complete Paise Eighty One Only
14 Providing and laying Single side mirror polished
Telephone Black Granite stone slab 15 to 18 mm
(Average) Sil & Jams for Window thick of Rupees Six Thousand
approved quality incl. full moulded round front Four Hundred Sixty
edge fixed in wall for partition and jointed with Nine And Paise Fifty
grey cement slurry including rubbing and Six Only
polishing etc.complete
15 Providing and laying Jesalmer stone flooring over
20 mm (av.) thick bases of cement mortar 1:6 (1-
cement : 6-coarse sand) or L.M. 1:1.5 laid over
and jointed with grey cement slurry including Sq.mt. 1.00 2166.45
Hundred Sixty Six And
rubbing and polishing etc. complete (A) 25 mm
Paise Forty Five Only
16 Constructing Sandwich Platform of 18 mm thick
Polished Black or selected Granite at top and
mm thick Kota stone slab With 75CM height with
necessary Support using 20mm thick cement
mortar 1:3 for sandwich and fitting at bottom &
edges with waterproof rigid adhesives including Rupees Eight
making necessary grooves in walls with Thousand One
Vertical support of double Kota stone sandwich Sq.mt. 1.00 8101.21 Hundred One And
every 60 cm centre to centre including all labour Paise Twenty One
material of approved quality including full Only
moulded round front edge fixed in wall for
partition and jointed with grey cement slurry
including rubbing and polishing etc. complete
17 Providing and fixing pre-cast concrete kerb stone
of gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250
grade concret as per approved design and Rupees Four Hundred
including excavation for fixing in proper line and Rmt. 1.00 402.55 Two And Paise Fifty
level,filling the joint with C:M 1:3 (1cement:3fine Five Only
sand) etc complete. (upto 10 ton)
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 2 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
18 Providing and fixing pre-cast concrete kerb stone
of gray cement based concrete block 30cm
length,45cm height and 10cm thick of M250
grade concret as per approved design and Rupees Six Hundred
including excavation for fixing in proper line and Rmt. 1.00 637.89 Thirty Seven And
level,filling the joint with C:M 1:3 (1cement:3fine Paise Eighty Nine Only
sand) etc complete. (upto 10 ton)
19 Providing and fixing pre-cast Rubber Dye / steel
Dye inter locking concrete block 60mm thick with
grade of concrete M300 pnumatic compressed /
vibrated mechanically and as per approved
design Confirming to IS 15658 : 2006 including
Sq.mt. 1.00 701.90 Hundred One And
35 mm Sand layer for levelling and filling the joint
Paise Ninety Only
with sand in proper line and level as per guidlines
of IRC : SP 63-2018 etc. Complete.
20 Providing and laying coloured glazed tiles of the
size 300 mm x 200 mm x 8 mm / 300 mm x 450 Rupees One
mm x 8 mm in skirting, risers of steps and dedo Thousand Four
on 10 mm. thick cement plaster 1:3 (1 cement : 3 Sq.mt. 1.00 1488.24 Hundred Eighty Eight
coarse sand) & jointed with white cement slurry. And Paise Twenty
21 Removing and re-fixing existing paver block
including 75mm sand layer for levelling & filling Rupees Five Hundred
the joints with sand in proper line and level etc Sq.mt. 1.00 508.03 Eight And Paise Three
complete as directed. Only
22 Providing and laying broken china mosaic
flooring for terrace using 12 mm to 20 mm
broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be Rupees Seven
tempered to bring mortar creme out upto Hundred Seventy Nine
surface using white cement including rounding And Paise Seventy
off junctions and extending them upto 15 cm Only
along the wall,clearing with water and oxalic acid
etc. as directed.
23 Dismentaling tiled of stone floors laid in mortar
including stacking of serviceable materilas and Rupees Forty Nine
disposal of unserviceable materials with all lead Sq.mt. 1.00 49.12 And Paise Twelve
24 Dismentaling of sheet roofing including ridges,
Hips, Valleys, Gutters etc. stacking of serviceable
Rupees Forty Nine
materilas and disposal of unserviceable materials
Sq.mt. 1.00 49.12 And Paise Twelve
with all lead and lift.(i) G.I.sheet roofing.
25 Providing and laying Mirror polished green
marble stone slab 20mm (average) thick for stair
steps and riser as per design including full
moulded round front edge in trede of steps lain Rupees Four
on 20mm thick cement mortar 1:6 (1 Cement : 6 Sq.mt. 1.00 4009.66 Thousand Nine And
Course sand) jointed with grey cement slurry Paise Sixty Six Only
including rubbing and polishing etc complete.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 3 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
26 Providing and laying water proofing treatment
with china mosaic tiles flooring over avg 50 mm
C.C. 1:2:4 bedding for maintaining slope for plain
and curve surface & 12 mm to 20 mm of broken
piece not more than 2.5CM of ceramic / glazed
tiles ( one for more colour as directed ) to be laid
over cement mortar bedding of C M 1:3 (1 Rupees One
cement : 3 sand ) contain water proofing Thousand One
materials per bag of cement useas specified by Sq.mt. 1.00 1158.47 Hundred Fifty Eight
manufactured and slops to be tempered to bring And Paise Forty Seven
mortar up to surface with using white cement and Only
colour pigment including rounding of junctions
and extending them up to 15 cm along the wall
and curing with bends any patens or design as
per drawing and cleaning by using oxalic acid etc.
27 Providing and fixing Door Fram (Jodhpuri Red
stone) Size (12cmx8cm) and refixing old door
shutter with necessary fixtures and fasteners with
Sq.mt. 1.00 2397.36 Hundred Ninety Seven
all labour charges as per engineer in charge.
And Paise Thirty Six
28 Providing and laying white glazed tiles 6mm thick
in skrting risers of steps and dedo on 10mm thick Rupees One
cement plaster 1:3 (1-cement : 3-coarse sand) Sq.mt. 1.00 1030.57 Thousand Thirty And
and jointed with white cement slurry Paise Fifty Seven Only
29 Providing and laying 25mm thick both side
polished marble stone slab for shelves
Rupees Eight Hundred
cupboards including fixing with necessary Sq.mt. 1.00 882.74 Eighty Two And Paise
grooves with all labour material etc. complete
Seventy Four Only
30 Providing and Suplying good quality Key and Rupees One Hundred
Lock for Door. Nos 1.00 116.15 Sixteen And Paise
31 Providing and Suplying good quality Chain for
Rupees One Hundred
Nos 1.00 176.75 Seventy Six And Paise
Seventy Five Only
32 Providing wood work in frames of Doors,
windows cleare story windows and othersimilar Rupees Six Hundred
works wrought, framede and fixed in position. Cu.Dm. 1.00 610.23 Ten And Paise Twenty
(A) Indian Teak Wood Three Only
33 Providing and fixing 35 mm thick shutters for
Doors, windows and clear story windows Rupees Four
including anodised alluminium butt hinges with Thousand One
necessary screws.(A) Indian Teak Wood (1) Fully Hundred One And
Panelled (upto 10 ton) Paise Six Only
34 Providing and fixing 35 mm thick panelled ,glazed
or panelled and glazed shutters, for Doors
windows and clearstory windows including Rupees Three
anodised alluminium But hinges with necessary Thousand Six Hundred
screws and indian teak wood shutters with. (B) Fifty Eight And Paise
Particle board panels (upto 10 ton) Eighty Five Only
35 Provoding and fixing flush door shutters, solid
core construction with frame of first class
hardwood with cross board and face veneer or Rupees One
plywood face panels, including anodised Thousand Eight
alluminium butt hinges with necessary screws. Sq.mt. 1.00 1829.74 Hundred Twenty Nine
(B) Non-decorative type and block board core And Paise Seventy
anodised alluminium butt hinges in flush door Four Only
shutters (2) 35 mm thick.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 4 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
36 Providing and fixing 30 mm wire gauge shutters
using galvanised M.S. wire of I.S. gauge
designation of 85 G. with wire of 0.56 mm dia,for Rupees One
Doors, windows and clearstory windows including Thousand Two
bright finished or/ and black enamellede M.S. Sq.mt. 1.00 1270.12
Hundred Seventy And
butt hinges with necessary Mango wood or Paise Twelve Only
equivalent quality. (upto 10 ton)
37 Providing and fixing M.S. grills of required pattern
to wooden frames of windows etc. with M.S. flats
at required spacings and frame alround, square Rupees One Hundred
or round bars with round headed bolts and nuts Kg. 1.00 106.23 Six And Paise Twenty
or by screws (A) Plain Grill. (upto 10 ton) Three Only
38 Providing and fixing M.S. grills of required pattern
to wooden frames of windows etc. with M.S. flats
at required spacings and frame alround, square Rupees One Hundred
or round bars with round headed bolts and nuts Kg. 1.00 160.85 Sixty And Paise Eighty
or by screws. (B) ORNAMENTAL GRILL Five Only
39 Providing and fixing 35 mm thick shutters for
Doors, windows and clerestory windows
including Indian teak wood frames 10 cm x 7 cm. Rupees Five
size including anodized alluminium fixtures and Thousand Three
fastenings including primer coat of approved Hundred Thirty Eight
quality and two coats of oil painting etc, And Paise Thirty Only
complete. (ii) Fully Panelled.
40 Providing and fixing 35 mm thick shutters for
Doors, windows and clerestory windows
including Indian teak wood frames 12 cm x 7 cm. Rupees Five
size including black enamelled iron oxidized Thousand Five
fixtures and fastenings including primer coat of Sq.mt. 1.00 5533.68 Hundred Thirty Three
approved quality and two coats of oil painting etc, And Paise Sixty Eight
complete. (ii) Fully Panelled. Only
41 Providing and fixing FRP frame size 100x50 mm
and 28mm thick FRP depress panel shutter
having extra reinforcement on sides & edges in
Gel coat finish. The core of the shutter & frame is
to be filed up with injected fire retardant grade
polyurethene foam done in situ alongwith Rupees Two
embedded wooden pieces for stiffening & also Thousand Three
taking hinges & fintures. The whole FRP frame & Sq.mt. 1.00 2377.76 Hundred Seventy
shutter is to be water proof weather proof, termite Seven And Paise
proof & resistance to mild acid/alkali. Rates are Seventy Six Only
to be inclusive of S.S hinges with necessary
screws & alluminium fixtures & fastenings &
fastener sleeve.
42 Providing corrugated F.R.P. sheet roofing fixed
with G.I. plain and bitumen washer complete Rupees Nine Hundred
excluding the cost of purlins rafter and trusses.
Sq.mt. 1.00 965.95 Sixty Five And Paise
Ninety Five Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 5 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
43 Providing and fixing complete sliding shutter solid
PVC window 25mm thick factory made glazed solid
PVC window shutter consisting of frame made out of
M.S. tube of 19 gauge of size 15 x 15mm for styles
top, bottom rail. M.S. frame shall have a coat of steel
primer of approved make and manufacture, M.S.
frame shall be covered with 4mm thick heat mouled
PVC ‘C’ channel of size 58mm x 25mm x 38 mm out
of which 8mm shall be bent at 90 degree towards
inner side on front face of the window shutter forming
stiles. For top rail and bottom rails, M>S. frame shall
be covered with 4mm thick, 58mm wide PVC sheet
out of which 8mm shall be bent at 90 degree towards
inner side on front face and 38mm wide PVC sheet
shall cover the M.S. frame at top and bottom rail on Rupees Two
back side of window shutter, 4mm thick 15mm wide Thousand Six Hundred
cross PVC sheet as gap insert for top and bottom rail. Two And Paise Sixty
PVC sheet beading of 8mm thick (4mm x 2) to be Two Only
stuck internally with solvent cement adhesive in top
and bottom rails. Glass panel will be fitted externally in
the clear space available between stiles & rails and
fixed between PVC sheet of stiles and rails bent at
degree on front face 12mm x 123mm ‘L’ shape outer
PVC beading nailed on stiles and rails at the back
side so that ‘L’ shape outer PVC beading can be
removed when required for replacement of broken
glass etc. complete as per direction of etc. complete
as per direction of Engineer in charge and
manufactuture’s specification.
44 Providing and fixing PVC printed false ceiling with
flush type with alluminium frame, frame work is
done with three different sections of G.I. sheet of
24 gauge thickness named as C, U and L. The C
section is fixed with hangers at an equal distance
of 36” each and then U section is fixed
perpendicular on C section with steel screws at
and equal distance of 16” each. The complete
frame work is supported by G.I. L angle/6 mm rod
hangers from the roof and L sections is fixed all
around the wall as shown in the diagram. 5mm Rupees Nine Hundred
PVC sheet strips of size 2 wide are fixd with Sq.mt. 1.00 911.02 Eleven And Paise Two
counter sunk steel screws on the U section. Only
Further 3mm PVC sheet is stuck to these PVC
strips with solvent cement such that joining lines
are perfectly matched. P.U. putty is filled, dried
and leveled and requisite coats of primer and
paint is done on the ceiling for getting fine
surface finish etc. complete as per direction of
Engineering and charge manufacturer’s
specification and drawing
45 Steel work, welded in built up sections framed
work including cutting, hoisting, fixing in position
and applying a priming coat of read lead paint.
(A)In beams and joists, channels angles Tees,
flats, with connecting plates or angle cleats as in Qtl 1.00 9108.48
Hundred Eight And
main and cross beams. Hip and jack rafters,
Paise Forty Eight Only
purlins conneted to common rafters and the like
46 Providing and fixing in position callapsible steel
shutters with vertical channels 20 x 10 x 2 mm
braced with flat iron diagonals 20 x 5 mm size
with top and bottom rails of T_rin 40x 40 x 6 mm Rupees Six Thousand
with 38mm dia, steel pulleys complete with bolts, One Hundred
nuts, locking arrangements, stoppers handles Nineteen And Paise
including applying a priming coat of read lead Ninety Three Only
paint. (upto 10 ton)
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 6 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
47 Providing and fixing rolling shutters of approved
make made of 80 mm wide M.S. laths inter-
locked together through their entire length and
jointed together at the ends by end locks
mounted on specially designed pipe shaft with
bracket plates, guide channels and arragements Sq.mt. 1.00 3554.40
Hundred Fifty Four
for inside and outside locking with push-pull
And Paise Forty Only
operation including the cost of hood cover and
spring etc. complete.(A) Shutters having width
48 Providing and fixing rolling shutters of approved
make made of 80 mm wide M.S. laths inter-
locked together through their entire length and
jointed together at the ends by end locks
mounted on specially designed pipe shaft with
bracket plates, guide channels and arragements Sq.mt. 1.00 4546.01
Hundred Forty Six And
for inside and outside locking with push-pull
operation including the cost of hood cover and
spring etc. complete. (B) Shutters having width
3.5 M. and above
49 Providing and fixing window having extruded
aluminum Colour anodized section frame main
outer size 95mm x 24mm x 1.17mm @ wt.of
0.738 Kg/mt, horizontal Three track member size
vertical member of size 92mm x 31.75mm x
1.50mm,@ Wt. 1.06 Kg/mt) with sliding shutters Rupees One
of horizontal member size 40 mmx18mm Thousand Five
x1.29mm @ wt.of 0.456 Kg/mt, vertical member Sq.mt. 1.00 1583.95 Hundred Eighty Three
of size 40mm x 18mm x 1.29 mm @ wt.of And Paise Ninety Five
0.456Kg/mt with 5 mm thick transparent bronze Only
colour tinted float glass with powder coated
aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per details
50 Providing and fixing window having extruded
aluminum Colour anodized section frame main
outer size 63.50 x 38.10 x 1.95 mm, @ Wt
Kg / Rmt), horizontal two track member size
Kg/mt, vertical member of size 61.85 mm x
31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with
sliding shutters of horizontal member size 40mm
x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical Sq.mt. 1.00 1713.70
Hundred Thirteen And
member of size 40mm x 18mm x 1.29mm @
Paise Seventy Only
wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm
thick transparent bronze colour tinted float glass
with powder coated aluminum fittings and fixtures
and transparent silicon sealant glass fixing to
frame as per details etc complete for window.
51 Providing and fixing aluminium door having top
and bottom rail of 114 mm x 45 mm (1.27kg/mt)
and middle rail and vertical members of 45 mm x
45 mm(0.655 kg/mt), door frame of 65 mm x
mm (0.76Kg/Rmt.) all aliminum members shall be
powder coated. Door shutter shall be with partly
Sq.mt. 1.00 3839.99 Hundred Thirty Nine
5mm thick Acraylic FlexibleTranporant Glassst &
And Paise Ninety Nine
other necessary fixtures and fastening etc
complete incl. labour charges. (Door size of
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 7 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
52 Providing and fixing colour anodised aluminum
section lovered ventilator with frame size
63.50x38.10mm Zindal Brand in 5mm thick
ground glass and colour anodised aluminum
lovers fixtues Holdfase etc completed. (Aluminum Sq.mt. 1.00 1301.82
Hundred One And
section shall be Zindal or equivalent brand &
Paise Eighty Two Only
glass of Modi guard Ais or equivalent brand)
53 Aluminium Partition
Providing & Fixing Colour anodized Alluminium
Partition PARTLY PANNELED,PARTLY GLAZED
using alluminum section of Frame size
63.50x38.10x1.95 mm (of jindal Section no.4605
@ Wt.1.094 Kg/Rmt) Partly Glazed 5mmt thick
Modi Guard and Partly Fixed with 12mm thick
exterior grade both side prelaminated sheet
Sq.mt. 1.00 3164.33 Hundred Sixty Four
including rubber gasket and beading clips for
And Paise Thirty Three
Glazing/ panneling and cleat angle,with
expansion hold fasteners including necessary
filling up of gaps at Junction including all required
materials labour and equipment as per detailed
drawing As Directed by Engineer in Charge.
54 Providing and fixing Door having side hung
Single shutter having with non-teakwood frame
10x7cm with factory made 35mm thick flush door
Rupees Six Thousand
both side pre-laminated sheet with S.S. aldrop,
One Hundred Twenty
S.S. Handle, tower bolts, Hinges other Materail Sq.mt. 1.00 6122.62
Two And Paise Sixty
etc. as per detail color & pattern approved by this
office including necessary anodized aluminum
fixtures and fastening etc complete.
55 Providing and Alluminium Composite panel of
ALSTRONG with approved shade of 4 mm thick (
0.5 +3+0.5 ) .The Composite panel should be
made of 3mm thick 100 % virgin poly then core of
LPDE sandwiched between two skins of 0.5 mm
thick Alluminium sheet of which one side is
having three layers of PVDF coating with Kyanar Rupees Two
500 paint to ensure the superior corrosion Thousand Four
resistance and weather ability and the other side Hundred Twenty Four
is service coated with Epoxy paint ( Grey ) .The Only
adhesive used DUBOND for bonding the two
skins which can take 8 to 9 Kg. of weight to
separate . This including structural frames for
fixing and finishing etc. complete.
56 Providing and fixing 65mm thick plywood partition
with teakwood frame size 50x50mm including
both side of 8mm plywood sheet with necessary
Thousand Six Hundred
screws and other fixtures & fastenier with both Sq.mt. 1.00 1651.38
Fifty One And Paise
side of oil paint etc complete as directed.
Thirty Eight Only
57 Providing and fixing sheet glass ordinary quality
bedded in putty and fixed with wooden beadings
including the cost of wooden beadings of first-
Sq.mt. 1.00 1162.52 Hundred Sixty Two
class teak wood and necessary cutting of glass.
And Paise Fifty Two
58 Providing and fixing sheet glass ordinary quality
bedded in putty and fixed with wooden beadings
including the cost of wooden beadings of first-
Sq.mt. 1.00 1182.57 Hundred Eighty Two
class teak wood and necessary cutting of glass.
And Paise Fifty Seven
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 8 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
59 Providing corrugated G.I. sheet of class-3 roofing
fixed with glavanished iron J or L Hooks, Bolts
and nuts 8mm diameter with bitumen and G.I. Rupees Seven
limpet washer or G.I. limpet washer. filled with Hundred Thirty Four
white lead complete excluding the cost of purlins,
And Paise Nineteen
Rafters and Trusses.(1) 0.80 mm thick sheet. Only
60 Providing and fixing wooden planks ceiling with
tounged and grooved jointing and wood screws Rupees One
(frame work and cover fillings to be measured Thousand Forty Six
and laid for separately) (A) Indian Teak wood (i) And Paise Thirty Three
12mm thick (upto 10 ton) Only
61 Providing and fixing wooden planks ceiling with
tounged and grooved jointing and wood screws
(frame work and cover fillings to be measured
Sq.mt. 1.00 1526.67 Hundred Twenty Six
and laid for separately) (A) Indian Teak wood (i)
And Paise Sixty Seven
20mm thick (more than 10 ton)
62 Providing and fixing single layer waterproof
GYPSUM board 12.5 mm thick of the make
Newgood Group Co. Ltd. or equivalent &
Newgood Group Co. Ltd. company sections using
waterproof board of size 1220 mm x 1830 mm x
8.0 mm suspended by G.I suapender of size
mm x 3 mm with intermediate channel of size
mm x 40 mm x 0.80 mm at 1220 mm center to
Rupees Six Hundred
center ceiling section of size 40 mm x 35 mm x
Sq.mt. 1.00 606.95 Six And Paise Ninety
0.55 mm at 457 mm center to center and
perimetre chanel A of size 20 mm x 27 mm x
mm x 0.50 mm at edges & drops including paper
tap sand sofit cleat, anchor fastener, scoch bolt
connecting cleat joining compound top coat on
ceiling including making necessary opening for
light fitting, diffuser etc. complete as per detail
drawing as directed.
63 Dismentaling of sheet roofing including ridges,
Hips, Valleys, Gutters etc. stacking of serviceable Rupees Forty Nine
materilas and disposal of unserviceable materials Sq.mt. 1.00 49.12 And Paise Twelve
with all lead and lift.(i) G.I.sheet roofing. Only
64 Dismentling doors, windows, ventilators etc.
(wood or steel) shutters including chowkhats
Rupees One Hundred
architraves, holdfasts and other attachment etc.
Each 1.00 192.09 Ninety Two And Paise
complete and stacking them within all lead and
lift.(i) Not exceeding 3 Sq.M. in area.
65 Dismentling barbed wire in fencing including
making rolls and also including dismentling
fencing posts including all earth work concrete in
base and making good the disturbed ground Rupees Sixty Eight
stacking useful materials as directed and
Rmt. 1.00 68.14 And Paise Fourteen
disposing as directed and disposing of the Only
unserviceable materials with all lead and lift.
66 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain
Rupees Seventy Six
water pipes with fittings and clamps including
Rmt. 1.00 76.68 And Paise Sixty Eight
stacking the materials with all lead and lift ( for
any dia, of pipe)
67 Dismantling santtary fittings like wash basin .
W.C. pan Indian and European type, flushing
Hundred Ninety Four
tank etc. including stacking the materials with all Each 1.00 394.51
And Paise Fifty One
68 Scraping oil paint from steel and other metal Rupees Forty Nine
surface and making the surface even (with Hand Sq.mt. 1.00 49.32 And Paise Thirty Two
Scraping.) Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 9 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
69 Providing and fixing M.S. fan clamps of shape Rupees One Hundred
and size as specified in existing R.C.C. slab Seventy Eight And
including cutting chase and making good. Paise Seventy Three
70 Cutting out cracks of roof terrace to V- section
Rupees Sixty Eight
cleaning out, wetting , grouting with cement and
Rmt. 1.00 68.49 And Paise Forty Nine
sand slurry 1:3 (1-cement 3-sand ) (upto 10 ton)
71 Cutting out cracks roof terrace to V-Section
cleaning out and filling solidly with a hot mixture Rupees Seventy Eight
of bitumen and clean dry sand (1:1 by weight) Rmt. 1.00 78.84 And Paise Eighty Four
(upto 10 ton) Only
72 Providing and fixing 12.5 mm thick Gypsum
board suspended false ceiling including
providing and fixing of perimeter channels G.I. Rupees Six Hundred
hinges all joints finished with joint filler as Sq.mt. 1.00 606.95 Six And Paise Ninety
recommended by manufacture {India Gypsum} Five Only
including making opening holes for various
73 Providing and fixing Wire guage shutter using
galvanised MS wire of IS guage disignation
mm for ventilator, window, door etc incl. using
Sq.mt. 1.00 1339.24 Hundred Thirty Nine
30x6mm MS steel plate patty with all labour &
And Paise Twenty
material incl. fitting charges as per instruction by
74 Providing and fixing Aluminum Pigeon Grill Made
up of 45x12x1mm size frame rail of Weight 0.327 Rupees Two
Kg./mt and 6mm size aluminum grill including all Thousand One
required fixtures and fasteners with necessary Sq.mt. 1.00 2161.21 Hundred Sixty One
fixing in position as directed by Engineer in And Paise Twenty One
75 Providing corrugated PPGL Sheets roofing fixed
with Galvanized iron 'J' or 'L' hooks bolts and nuts
8 m. diameter with bitumen and G.I.Limpet Rupees One
washers filled with white lead complete including Thousand Twenty Nine
ridges, gutters etc. excluding the cost of purlins, And Paise Nineteen
rafters and trusses. (1) 0.60 mm. Thick sheet Only
76 Removing Old laminate sheet & Re-fixing new Rupees One
1.00mm thick laminate sheet on conference room Thousand One
table(or Any Object ) top & Side with all labour Sq.mt. 1.00 1174.63 Hundred Seventy Four
charge & other necessary fixture and fasteners. And Paise Sixty Three
77 Providing and fixing 30mm thick flush door Rupees Five
shutter With 1 mm th. Laminat on both & other Thousand Seven
fixtures & fastenings With all labour charges etc Sq.mt. 1.00 5735.18 Hundred Thirty Five
compelete as directed by Engineer in Charge. And Paise Eighteen
78 Removing Old sheet & fixing new 4mm thick ivory
backlight sheet with necessary screw and
Rupees Nine Hundred
required silicon for fill up to voids and other
Sq.mt. 1.00 971.01 Seventy One And
fixtures and fastening by Engineer in charge etc
79 Providing and fixing SS Mosquito Net with
20mmx 4mm thick with in Wooden Window
Shutter Jali of 0.71 mm to existing grill of window Rupees Nine Hundred
or varandah incl. gap filling around edges with Sq.mt. 1.00 929.35 Twenty Nine And
wooden patti or any suitable means & necessary Paise Thirty Five Only
fixtures and fastenings as per instruction of
Engineer in charge
80 Dismentling existing GYPSUM false ceiling /
Rupees One Hundred
playwood wall paneling inclduing all GI section
Sq.mt. 1.00 136.35 Thirty Six And Paise
with all labour charges etc complete
Thirty Five Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 10 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
81 Providing and fixing mirror with 8mm chamber
Dharpolshing with silicon filler with all labour Rupees One
charges etc complete as design by engineer in Nos. 1.00 1212.00 Thousand Two
charge. Hundred Twelve Only
(Bombay daying or equuivelent brand)
82 Providing and fixing toilet paper roll stand with Rupees One
necessery fixtures and fastners and labour Thousand Four
charge s directed by Engineer in charge. Hundred Fourteen
83 Supplying and fixing decorative mirror with S.S.
"U" Shape stude with necessary fixtures and
fasteners with labour charge etc complete as Sq,mt. 1.00 1565.50
Hundred Sixty Five
directed by Engineer in charge.
And Paise Fifty Only
84 Providing and fixing BWP grade flush door
shutters, solid core construction with frame of
first class hardwood with cross board and face
veneer or plywood face panels, with both side
mm laminate finishing including 4nos
125x25x2mm brass hinges with necessary
screws. Decorative type and pine wood core
flush door shutters with 2 no of brass holdfast
325 mm long 1 no brass tower bolt 250 mm long
and two no of 250 mm long, 19mm dia Brass
Sq,mt. 1.00 4735.18 Hundred Thirty Five
door handles on both side. Decorative both side
And Paise Eighteen
laminated Flush door 35 mm thick with frame of
15 cm x 7 cm Indian teak wood frame including
all necessary brass fittings, fixtures, hardware
screw and adhesive etc. fixing up to all lead and
lift height etc. complete with 2 coats of PU polish
as per manufacturers specifications as per
direction of engineer in charge.
85 Providing and supplying Floor protector sheet for
Rupees One Hundred
flooring work with necessary taping work with all
Nos. 1.00 126.25 Twenty Six And Paise
labour charges etc complete as directed by
Twenty Five Only
engineer in charge.
86 Removind old glass of Aluminum Window shutter
refixing New 5mm thick black glass with new
Rupees Six Hundred
EPDM 15mm thick black Rubber with other
Sq.mt. 1.00 670.51 Seventy And Paise
necessary fixtures and fastening with all labour
work etc Complete as directed by Engineer in
87 Repairing of Door & Window including
replacement of Glass, screw,nut
Nos. 1.00 1111.00 Thousand One
bolts,stoper,hinges, all fastening & fixture &
Hundred Eleven Only
labour as per instruction of engineer incharge.
88 Providing and fixing steel cupboard having frame
of 40mmx40mmx5mm MS angle double door
shutter of CRS plate of 18 guage (1.219mm
thickness) with 30mmx2mmx3mm angle framing
at top and bottom edge of shutter 10mmx10mm
square MS bar 2 Nos. vertical and 40mmx3mm Rupees Five
MS flate at one edge of each shutter and for lock Sq.mt. 1.00 5600.90 Thousand Six Hundred
along with one coat of redoxide and two coats of And Paise Ninety Only
spray oil painting of approved brand and colour
shed and locking arrangement as directed by
Engineer in charge.
89 Providing and Fixing Both Side 60cm long SS Rupees One
soft channel rail for trolley basket including Thousand Four
necessary Fixtures and fastening etc complete as Sq.mt. 1.00 1462.48 Hundred Sixty Two
per Instruction of Engineer in charge. And Paise Forty Eight
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 11 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
90 Providing and fixing 90 cm high Stainless Steel
railing made from anticorrosive 304 grade S.S.
pipe of 50 mm dia (16 gauge) as hand rail with
S.S. 304 grade baluster of 32 mm dia (16 gauge) Rupees One
as a vertical support fixed in RCC slab / steps of Thousand Three
stair at 1.2 Mt. c/c including three horizontal S.S. Rmt. 1.00 1386.73 Hundred Eighty Six
pipes of 16 mm dia (16 Gauge) at equal distance And Paise Seventy
fixed by 16 mm dia (16 Gauge) S.S. pipe with Three Only
baluster including accessories as per detailed
drawing as directed etc. complete.
91 Providing and fixing 4mm thick charcoal interior
wall cledding sheet with 19mm thick plywood
sheet including teak wood framing
Sq.mt. 1.00 8147.37 Hundred Forty Seven
(20mmx20mm) and other fixtures and fastening
And Paise Thirty
with all labour charges etc complete as directed
by Engineer in charge.
92 Providing & erecting 6mm thick poly carbonate
sheet roof 65 mm G.B. class pipe for vertical
mtr. Centre to centre & 25 mm dia B class pipe
2.40 centre to centre parallel and 3.00 centre to Rupees Two
centre per perticular including cutting, binding, Thousand Two
bedding hooking excluding for foundation C.C.
Sq.mt. 1.00 2227.05 Hundred Twenty
1:2:4 for facing breading of 40 X 40 X 6 mm Seven And Paise Five
angle support 2 Nos. & painting etc complete for Only
93 Providing and fixing wall paneling with using
Alluminium pipe frame structure and supports Rupees Two
with 12mm thick MR grade plywood with Thousand Two
laminate / Vineer / Nova strucrure colour or Sq.mt. 1.00 2285.63 Hundred Eighty Five
polishing work with necessary fixtures and And Paise Sixty Three
fastening etc complete. Only
94 Providing and fixing 6 mm thick lexan
polycarbonate multi wall roofing sheet fixed with Rupees One
hilti screw and rubber silicon sealer as per Thousand Five
detailed of engineer in charge fixing in true line Sq.mt. 1.00 1529.98 Hundred Twenty Nine
and level with necessary clamping etc complete And Paise Ninety Eight
95 Supply & fixing factory finished cold formed Light
guage steel frame sections confirming to SP:6 (5)
1980 at site or work including riveted, bolted or
welded in builtup for all type of sections ,in Rupees One Hundred
framed work, cutting, hoisting, fixing in position Kg. 1.00 114.44 Fourteen And Paise
and applying primer coat of approved steel Forty Four Only
primer etc. complete as per structural designs &
directions of Engineer-in-charge.
96 Providing,Fixing & Installation Heavy Duty Rupees Two
Mortise lock best and approved quality as Thousand Two
directed by Engineer in Charge. Hundred Twenty Two
97 Providing and fixing 600mm x 450mm bevelled
edgemirrror of superior glass mounted on 6mm Rupees Eight Hundred
thick A.C.sheet or plywood sheet and fixing to Nos. 1.00 859.41 Fifty Nine And Paise
wooden pluge withC.P. brass screws and Forty One Only
98 Providing and fixing 12mm thick Tuffen Glass for
Rupees Eight Hundred
best and approved quality as per directed by Sq.mt. 1.00 808.00
Engineer in charge.
99 Providing and fixing Fountain as per direction by
Engineer in charge. Nos. 1.00 4040.00
Thousand Forty Only
100 Providing and Fixing SS 25mm Dia Pipe with
Rupees One Hundred
Labour charges etc complete as directed by
Rmt. 1.00 121.20 Twenty One And Paise
Engineer in charges.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 12 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
101 Providing and Fixing SS Molded Bracket with Rupees One Hundred
Labour charges etc complete as directed by Pair 1.00 151.50 Fifty One And Paise
Engineer in charges. Fifty Only
102 Providing and caying Mirror inable polishing work
Rupees One Hundred
with necessary fixtures and fastening etc
Sq.mt. 1.00 166.65 Sixty Six And Paise
Sixty Five Only
103 Providing Marble Floor polishing Work with all
Rupees Five Hundred
Labour charges and Other Material etc
Sq.mt. 1.00 590.85 Ninety And Paise
complete as directed.
Eighty Five Only
104 Providing and fixing Stainless Steel Name Plate
with Radium letters & other fixitures and
Sq.mt. 1.00 737.30 Hundred Thirty Seven
fastening etc complete as directed.
And Paise Thirty Only
105 Providing Wooden polishing Work with all Labour
Rupees Four Hundred
charges and Other Material etc complete as
Sq.mt. 1.00 464.60 Sixty Four And Paise
106 Providing and fixing Shop Disk etc complete as
Rupees Two Hundred
Nos. 1.00 222.20 Twenty Two And Paise
107 Providing and fixing Stainless Steel Shop Stand
0.30 meter long with SS railing by Engineer in
Thousand Forty Four
charge with fixing and fastening of labour charges Nos. 1.00 1044.34
And Paise Thirty Four
etc complete as directed.
108 Providing and fixing SS Moulded design for both
side of Curtain 25mm Dia pipe as directed by Rupees Four Hundred
Engineer in charge. Four Only
109 Providing & Doing for Chair Repairing like
screws, Bolts, Nails, Stopper ,revolving Tire
Rupees Nine Hundred
Hinges with labour charges etc Complete as Nos. 1.00 909.00
directed by Engineer in charge.
110 Providing & Doing for Dining Table/Office Table
/Study Table Repairing like screws, Bolts, Nails, Rupees One
Stopper, Hinges with labour charges etc Thousand Nine
Complete as directed by Engineer in charge. Hundred Nineteen
111 Providing and fixing Corner Glass (12"x12") with
SS railing by Engineer in charge with fixing and Rupees Five Hundred
fastening of labour charges etc complete as Nos. 1.00 563.58 Sixty Three And Paise
directed. Fifty Eight Only
112 Providing & Doing Kitchen Drawer Channel Rupees Three
Repairing With all Screw & labour For One Hundred Forty Nine
Trolley Drawer Charges. And Paise Forty Six
113 Providing & Fixing SS Double Hook (V Hook)
Rupees One Hundred
With all Screw & labour etc complete as
Nos. 1.00 199.98 Ninety Nine And Paise
dicrected by Engineer in charge.
Ninety Eight Only
114 Providing And Fixing C.I. Cover with frame
Rupees Five Hundred
300mm x 300mm With all Screw & labour etc
Nos. 1.00 575.70 Seventy Five And
complete as dicrected by Engineer in charge.
Paise Seventy Only
115 Providing And Fixing C.I. Cover with frame
Rupees Nine Hundred
455mm x 610mm With all Screw & labour etc
Nos. 1.00 995.86 Ninety Five And Paise
complete as dicrected by Engineer in charge.
Eighty Six Only
116 Providing And Fixing C.I. Cover with frame Rupees One
500mm x 700mm With all Screw & labour etc Thousand Five
complete as dicrected by Engineer in charge. Nos. 1.00 1538.23 Hundred Thirty Eight
And Paise Twenty
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 13 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
117 Providing And Fixing C.I. Cover with frame Rupees Three
600mm x 850mm With all Screw & labour etc Thousand Eight
complete as dicrected by Engineer in charge. Hundred Fifty Six And
Paise Eighteen Only
118 Providing And Fixing C.I. Cover with frame for
manholes With all Screw & labour etc complete Rupees Six Thousand
as dicrected by Engineer in charge. Qtl 1.00 6250.89 Two Hundred Fifty And
Paise Eighty Nine Only
119 Providing And FixingC.I. Cover without frame
Rupees Eight Hundred
300mm x 300mm With all Screw & labour etc
Nos. 1.00 858.50 Fifty Eight And Paise
complete as dicrected by Engineer in charge.
120 Providing And FixingC.I. Cover without frame Rupees One
455mm x 610mm With all Screw & labour etc Thousand One
complete as dicrected by Engineer in charge. Nos. 1.00 1140.29 Hundred Forty And
Paise Twenty Nine
121 Providing And Fixing C.I. Cover without frame Rupees One
500mm x 700mm With all Screw & labour etc Thousand Five
complete as dicrected by Engineer in charge. Hundred Sixteen And
122 Providing And Fixing C.I. Cover without frame Rupees Four
600mm x 850mm With all Screw & labour etc Thousand Five
complete as dicrected by Engineer in charge. Hundred Five And
Paise Sixty One Only
123 Providing And Fixing C.I. Cover without frame for Rupees Seven
manholes With all Screw & labour etc complete Thousand Three
as dicrected by Engineer in charge. Qtl 1.00 7353.81 Hundred Fifty Three
And Paise Eighty One
124 Providing And Fixing Commercial Plywood Sheet
Rupees Four Hundred
12mm With all Screw & labour etc complete as
Sq.mt. 1.00 401.98 One And Paise Ninety
dicrected by Engineer in charge.
125 Providing And Fixing Commercial Plywood Sheet
Rupees Four Hundred
19 mm With all Screw & labour etc complete as
Sq.mt. 1.00 401.98 One And Paise Ninety
dicrected by Engineer in charge.
126 Providing And Fixing Commercial Plywood Sheet
Rupees Five Hundred
25 mm With all Screw & labour etc complete as
Sq.mt. 1.00 558.53 Fifty Eight And Paise
dicrected by Engineer in charge.
Fifty Three Only
127 Providing And Fixing Commercial Plywood Sheet
Rupees Two Hundred
6mm With all Screw & labour etc complete as
Sq.mt. 1.00 204.02 Four And Paise Two
dicrected by Engineer in charge.
128 Providing And Fixing Door closers (Heavy type of
765 number) Hardwire or Everite Prabhat or Rupees Six Hundred
Equivalent. With all Screw & labour etc complete Nos. 1.00 672.66 Seventy Two And
as dicrected by Engineer in charge. Paise Sixty Six Only
129 Providing And Fixing Hinges (Strap) Alluminium
10 cms. Length With all Screw & labour etc Rupees One Hundred
complete as dicrected by Engineer in charge. Each 1.00 127.26 Twenty Seven And
Paise Twenty Six Only
130 Providing And Fixing Hinges (Strap) Alluminium
15 cms. Length With all Screw & labour etc Rupees One Hundred
complete as dicrected by Engineer in charge. Each 1.00 139.38 Thirty Nine And Paise
Thirty Eight Only
131 Providing And Fixing Hinges (Strap) Alluminium
20 cms. Length With all Screw & labour etc Rupees One Hundred
complete as dicrected by Engineer in charge. Each 1.00 148.47 Forty Eight And Paise
Forty Seven Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 14 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
132 Providing And Fixing Hinges (Strap) M.S.
cms. Length or equivalent With all Screw & Rupees One Hundred
labour etc complete as dicrected by Engineer in Pair 1.00 126.25 Twenty Six And Paise
charge. Twenty Five Only
133 Providing And Fixing Hinges (Strap) M.S.
cms. Length or equivalent With all Screw & Rupees One Hundred
labour etc complete as dicrected by Engineer in Pair 1.00 135.34 Thirty Five And Paise
charge. Thirty Four Only
134 Providing And Fixing Hinges butt. I.S.I Mark
Brass (Railway type heavy) 7.5 cms. Length or Rupees One Hundred
equivalent With all Screw & labour etc complete Pair 1.00 165.64 Sixty Five And Paise
as dicrected by Engineer in charge. Sixty Four Only
135 Providing And Fixing Hinges butt. I.S.I Mark Steel
10 cms. Length 14 gauge With all Screw & labour Rupees One Hundred
etc complete as dicrected by Engineer in charge. Pair 1.00 118.17 Eighteen And Paise
136 Providing And Fixing Hinges butt. I.S.I Mark Steel
7.5 cms. Length 16 gauge With all Screw & Rupees One Hundred
labour etc complete as dicrected by Engineer in Pair 1.00 151.50 Fifty One And Paise
charge. Fifty Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 15 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
137 Providing And Fixing Hinges butt. I.S.I Mark
Alluminium 10 cms. Length With all Screw & Rupees One Hundred
labour etc complete as dicrected by Engineer in Pair 1.00 165.64 Sixty Five And Paise
charge. Sixty Four Only
138 Providing And Fixing Hinges butt. I.S.I Mark
Alluminium 7.5 cms. Length With all Screw & Rupees One Hundred
labour etc complete as dicrected by Engineer in Pair 1.00 139.38 Thirty Nine And Paise
charge. Thirty Eight Only
139 Providing And Fixing Hinges butt. I.S.I Mark
Rupees One Hundred
C.P.Brass (Railway type Hinges) 10 cms. Length
Seventy Nine And
With all Screw & labour etc complete as Pair 1.00 179.78
Paise Seventy Eight
dicrected by Engineer in charge.
140 Providing And Fixing Hinges butt. I.S.I Mark
C.P.Brass (Railway type Hinges) 7.5 cms. Length Rupees One Hundred
With all Screw & labour etc complete as Pair 1.00 182.81 Eighty Two And Paise
dicrected by Engineer in charge. Eighty One Only
141 Providing And Fixing Hinges Parilamentary Steel
10 cms. Length With all Screw & labour etc Rupees Two Hundred
complete as dicrected by Engineer in charge. Each 1.00 267.65 Sixty Seven And Paise
Sixty Five Only
142 Providing And Fixing Hinges Parilamentary Steel
12.5 cms length With all Screw & labour etc Rupees Two Hundred
complete as dicrected by Engineer in charge. Each 1.00 225.23 Twenty Five And Paise
Twenty Three Only
143 Providing And Fixing Hinges Parilamentary Steel
7.5 cms. Length With all Screw & labour etc Rupees Two Hundred
complete as dicrected by Engineer in charge. Each 1.00 208.06 Eight And Paise Six
144 Providing And Fixing Hinges Parilamentary Brass
10 cms. Length With all Screw & labour etc Rupees One Hundred
complete as dicrected by Engineer in charge. Each 1.00 130.29 Thirty And Paise
Twenty Nine Only
145 Providing And Fixing Hinges Parilamentary
Brassl 12.5 cms. Length With all Screw & labour Rupees One Hundred
etc complete as dicrected by Engineer in charge. Each 1.00 139.38 Thirty Nine And Paise
Thirty Eight Only
146 Providing And Fixing Hinges Parilamentary Brass
7.5 cms. Length With all Screw & labour etc Rupees One Hundred
complete as dicrected by Engineer in charge. Each 1.00 125.24 Twenty Five And Paise
Twenty Four Only
147 Providing And Fixing Hinges Spring 10 cms.
Rupees Two Hundred
Length With all Screw & labour etc complete as
Each 1.00 212.10 Twelve And Paise Ten
dicrected by Engineer in charge.
148 Providing And Fixing Hinges Spring 7.5 cms.
Rupees Two Hundred
Length With all Screw & labour etc complete as
Each 1.00 206.04 Six And Paise Four
dicrected by Engineer in charge.
149 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Alluminium
Rupees One Hundred
cms length & 16mm dia With all Screw & labour
Each 1.00 147.46 Forty Seven And Paise
etc complete as dicrected by Engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 16 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
150 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Alluminium
Rupees One Hundred
cms length & 16mm dia With all Screw & labour
Each 1.00 159.58 Fifty Nine And Paise
etc complete as dicrected by Engineer in charge.
Fifty Eight Only
151 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Alluminium
Rupees One Hundred
35cms length & 16mm dia With all Screw &
Each 1.00 161.60 Sixty One And Paise
labour etc complete as dicrected by Engineer in
152 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Brass 20 cms. Rupees One Hundred
LengthWith all Screw & labour etc complete as Seventy Two And
dicrected by Engineer in charge. Paise Seventy One
153 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Brass 25 cms. Rupees One Hundred
LengthWith all Screw & labour etc complete as Each 1.00 182.81 Eighty Two And Paise
dicrected by Engineer in charge. Eighty One Only
154 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Brass30 cms.
Rupees One Hundred
LengthWith all Screw & labour etc complete as
Each 1.00 199.98 Ninety Nine And Paise
dicrected by Engineer in charge.
Ninety Eight Only
155 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Brass 35 cms.
Rupees Two Hundred
LengthWith all Screw & labour etc complete as
Each 1.00 208.06 Eight And Paise Six
dicrected by Engineer in charge.
156 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) C.P. Brass 20 Rupees One Hundred
cms. Length With all Screw & labour etc Seventy Three And
complete as dicrected by Engineer in charge. Paise Seventy Two
157 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) C.P. Brass
Rupees One Hundred
cms. Length With all Screw & labour etc
Each 1.00 190.89 Ninety And Paise
complete as dicrected by Engineer in charge.
Eighty Nine Only
158 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) C.P. Brass
Rupees One Hundred
cms. Length With all Screw & labour etc
Each 1.00 190.89 Ninety And Paise
complete as dicrected by Engineer in charge.
Eighty Nine Only
159 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) C.P. Brass
Rupees Two Hundred
cms length With all Screw & labour etc complete
Each 1.00 208.06 Eight And Paise Six
as dicrected by Engineer in charge.
160 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Iron Oxidized
Rupees One Hundred
cms length & 16mm diaWith all Screw & labour
Each 1.00 122.21 Twenty Two And Paise
etc complete as dicrected by Engineer in charge.
Twenty One Only
161 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Iron Oxidized
Rupees One Hundred
cms length & 16mm dia With all Screw & labour
Each 1.00 127.26 Twenty Seven And
etc complete as dicrected by Engineer in charge.
Paise Twenty Six Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 17 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
162 Providing And Fixing Latch (Tadi) as per sample
approved sectional flats (Heavy) Iron Oxidized
Rupees One Hundred
cms length & 16mm dia With all Screw & labour
Each 1.00 131.30 Thirty One And Paise
etc complete as dicrected by Engineer in charge.
163 Providing And Fixing S.S. Stopper 60 Cm long of
ASIS 304 With all Screw & labour etc complete
Nos. 1.00 360.17 Hundred Sixty And
as dicrected by Engineer in charge.
Paise Seventeen Only
164 Providing And Fixing SS.S. Stopper 30 Cm long
Rupees One Hundred
of ASIS 304 With all Screw & labour etc complete
Nos. 1.00 180.51 Eighty And Paise Fifty
as dicrected by Engineer in charge.
165 Providing And Fixing S.S. Stopper 20 Cm long of
Rupees One Hundred
ASIS 304 With all Screw & labour etc complete
Nos. 1.00 126.27 Twenty Six And Paise
as dicrected by Engineer in charge.
Twenty Seven Only
166 Providing And Fixing S.S. Aldrop 20 Cm long of
ASIS 304 Grade With all Screw & labour etc Rupees Two Hundred
complete as dicrected by Engineer in charge. Nos. 1.00 216.10 Sixteen And Paise Ten
167 Providing And Fixing S.S. Aldrop 25 Cm long of
ASIS 304 Grade With all Screw & labour etc
Hundred Twenty Four
complete as dicrected by Engineer in charge. Nos. 1.00 324.58
And Paise Fifty Eight
168 Providing And Fixing S.S. Aldrop 30 Cm long of
ASIS 304 Grade With all Screw & labour etc
Hundred Ninety Six
complete as dicrected by Engineer in charge. Nos. 1.00 396.61
And Paise Sixty One
169 Providing And Fixing S.S. Handle for door/
Rupees One Hundred
window 10 Cm size of ASIS 304 Grade With all
Nos. 1.00 155.54 Fifty Five And Paise
Screw & labour etc complete as dicrected by
Fifty Four Only
Engineer in charge.
170 Providing And Fixing S.S. Handle for Door 15 Cm
Rupees One Hundred
size of ASIS 304 Grade With all Screw & labour
Seventy Seven And
etc complete as dicrected by Engineer in charge. Nos. 1.00 177.76
Paise Seventy Six
171 Providing And Fixing SS.S. Pipe Handle for door
30 Cm size o ASIS 316 Grade With all Screw & Rupees Nine Hundred
labour etc complete as dicrected by Engineer in Nos. 1.00 974.65 Seventy Four And
charge. Paise Sixty Five Only
172 Providing And Fixing Glass 12 mm thick With all Rupees Seven
Screw & labour etc complete as dicrected by Hundred Fifty Three
Engineer in charge. And Paise Forty Six
173 Providing And Fixing Glass 10 mm thick With all
Rupees Six Hundred
Screw & labour etc complete as dicrected by
Sq.mt. 1.00 659.53 Fifty Nine And Paise
Engineer in charge.
Fifty Three Only
174 Providing And Fixing Glass 8 mm thick With all
Rupees Five Hundred
Screw & labour etc complete as dicrected by
Sq.mt. 1.00 518.13 Eighteen And Paise
Engineer in charge.
175 Providing and fixing domal section window having
section frame size (95mmx45mm) (1.35kg./smt.)
and vertical & horizontal shutter member
(65x30mm) (1.08 Kgm./Rmt.) and all other domal
aluminum members (Internal patta 29mm) Rupees Nine
bearing 2x1 (29mm) L- corner, clips & L clamps) Thousand Five
shall be mat finished powder coated door shutter Hundred Ninety Five
shall be 5mm thick glass & also mosquito net Only
with otehr necessary fixtures & fastening etc
complete inclduing all labour charges.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 18 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
176 Providing and fixing domal section"SOUND
PROOF " window having section frame size
(95mmx45mm) (1.35kg./smt.) and vertical &
horizontal shutter member (65x30mm) (1.08
Kgm./Rmt.) and all other domal aluminum
members (Internal patta 29mm) bearing 2x1
Sq.mt. 1.00 12120.00 Thousand One
(29mm) L- corner, clips & L clamps) shall be mat
Hundred Twenty Only
finished powder coated door shutter shall be
5mm thick glass & also mosquito ne with otehr
necessary fixtures & fastening etc complete
inclduing all labour charges.
177 Removing Or fixing Alluminium Section Door
/Partition otehr necessary fixtures & fastening Rupees One
(without material )inclduing all labour charges.
Thousand Ten Only
178 Providing & fixing Alluminium Section in Door
/Partition( only Section Without Sheet & Glass ) Rupees Three
otehr necessary fixtures & fastening etc complete Kg. 1.00 309.06 Hundred Nine And
inclduing all labour charges. Paise Six Only
179 Providing carpenter For necessary fixtures &
fastening Work As Per Directed by engineer in Rupees Eight Hundred
Each 1.00 809.01 Nine And Paise One
180 Steel work, riveted in built up sections framed
work including cutting, hoisting, fixing in position
and applying a priming coat of red lead paint. (A)
In beams and joists, channels angles Tees, flats, Rupees Five
with connecting plates or angle cleats as in main Thousand Eight
and cross beams. Hip and jack rafters, purlins Hundred Eighty Nine
conneted to common rafters and the like. And Paise Fifty Only
181 Steel work, riveted in built up sections framed
work including cutting, hoisting, fixing in position Rupees Six Thousand
and applying a priming coat of red lead paint. (D) Seven Hundred Forty
In trussses and trussed purlins, upto 25 M. span Seven And Paise
and 15 M ovarall height. Eight Only
182 Steel work, welded in built up sections framed
work including cutting, hoisting, fixing in position Rupees Ten Thousand
and applying a priming coat of red lead paint. (D) One Hundred Ninety
In trussses and trussed purlins, upto 25 M. span Three And Paise
and 15 M. ovarall height. Seventy Seven Only
183 Providing And Fixing Drawer /Shutter Loack With
Rupees Four Hundred
All neccesary Fixtures And Fastening complete
Nos. 1.00 499.95 Ninety Nine And Paise
As per Directed By EIC
Ninety Five Only
184 Credit for Wooden Door
Nos. 1.00 -303.00 Rupees Hundred Only -303.00
185 Credit for Wooden Window
Nos. 1.00 -202.00 Rupees Hundred Only -202.00
186 Credit for Aluminum Section Rupees Hundred And
Paise Forty Only
187 Credit for Steel Work Rupees And Paise
Thirty Five Only
188 Credit for Door SS Stopper Rupees And Paise
Twenty Five Only
189 Credit for Door SS Hinges Rupees And Paise
190 Credit for Door MS Hinges Rupees And Paise
191 Credit for SS Aldrop Rupees And Paise
Thirty Five Only
192 Credit for SS Handle Rupees And Paise
193 Credit for Brass Handle Rupees And Paise
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 19 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
194 Credit for Latch (Tadi) Alluminium Rupees And Paise
195 Credit for Latch (Tadi) Brass Rupees And Paise
196 Credit for Latch (Tadi) SS Rupees And Paise
Twenty Five Only
197 Credit for Stainless Steel, 304 Grade Rupees And Paise
Forty Five Only
198 White washing with lime on wall surface (two
coats) to give an even shade including
thoroughly booming the surface to remove all Rupees Twelve And
dirt, dust; mortar drops and other foreign matter. Paise Seventy Only
199 White washing with lime on wall surface (one
coats) to give an even shade including
thoroughly booming the surface to remove all Rupees Five And
dirt, dust; mortar drops and loose scales of lime Paise Eighty Six Only
wash and other foreign matter.
200 Extra over items 11 to 12 for every subsequent
coat of white washing with lime on wall surface. Rupees Five And
Paise Eighty Six Only
201 Extra over item 11 for white washing with lime on
ceilings and/or sloping roofs. Sqm 1.00 1.18
Paise Eighteen Only
202 Extra over Item 2 for white washing with lime on
Rupees And Paise
ceilings and sloping roofs. Sqm 1.00 0.51
203 Extra over Item 13 for every subsequent coat of
white washing with lime on ceilings and/or sloping Rupees And Paise
roofs. Fifty One Only
204 Colour washing with lime on wall surface (two
coats ) over and including a primary coat of white
washing to give an even shade after through Rupees Twelve And
brooming the surface to remove all dirt, dust, Sqm 1.00 12.88 Paise Eighty Eight
mortar drops and other foreigh matter. Only
205 Colour washing with lime on wall surface (one
coats ) to give an even shade including throughly
Rupees Eight And
brooming the surface to loose scales of lime Sqm 1.00 8.20
Paise Twenty Only
wash and other foreign matter.
206 Extra over item 17 to 18 for every subsequent
Rupees Eight And
coat of colour wash with lime on wall surface Sqm 1.00 8.20
Paise Twenty Only
207 Extra over Item 17 for colour washing on ceilings
and/or sloping roofs. Sqm 1.00 2.18
Paise Eighteen Only
208 Extra over items 18,19 for colour washing on
ceilings and sloping roofs. Sqm 1.00 2.18
Paise Eighteen Only
209 Cement washing with portland cement slurry on
wall surface (one coat) to give a smooth finish
including thoroughly broomings the surface to Rupees Twelve And
remove all dirt, mortar drops and other foreign Paise Three Only
210 Extra over Item No. 29 for every subseqent coat
of cement washing with port land cement slurry Rupees Twelve And
Paise Three Only
211 Removing dry or oil bound distemper by a
washing and scraping and sand papering the wall
Rupees Eleven And
surface smooth including necessary repairs to Sqm 1.00 11.53
Paise Fifty Three Only
scratches complete.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 20 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
212 Extra over item 33 for removing dry oil bound
distemper on ceilings and sloping roofs. Sqm 1.00 1.68
Paise Sixty Eight Only
213 Distempering with dry distemper of approved
brand and manufacture (two coats) and of
required shade on wall surfaces of given an even
Rupees Forty Nine
shade, over and including a priming coat of
Sqm 1.00 49.95 And Paise Ninety Five
whiting after thoroughly brooming the surface free
from mortar dropping and other foreign matter.
214 Distempering with dry distemper of approved
brand and manufacture (One coats) and of
required shade on wall surfaces of given an even
shade, after thoroughly brushing the surface Rupees Sixteen And
clean of all grease, dirt, loose pieces of scales Paise Four Only
including preparing the surface even and sand
papered smooth.
215 Extra over Items No. 38 and 39 of every
subsequent coat at distempering with dry
Rupees Fifteen And
distemper of approved brand and manufacture. Sqm 1.00 15.04
Paise Four Only
216 Extra over item 38 for distemepring with dry
Rupees Six And Paise
distemper on ceilings and slopings roofs. Sqm 1.00 6.69
Sixty Nine Only
217 Extra over item 39,40 for distempering with dry
distemper on ceilings and slooping roofs. Sqm 1.00 1.68
Paise Sixty Eight Only
218 Distempeing (Two coats) with oil bound
distemper of approved brand and manufacture
and of required shade on wall surfaces to give an
even shade, over and including a priming coat
with distemper primer of approved brand and
Rupees Seventy Five
manufacture after thoroughly brushing the Sqm 1.00 75.50
And Paise Fifty Only
surface free from mortar dropping and other
foreign matter and also including preparing the
surface even and sand papered smooth.
219 Distempeing (Two coats) with oil bound washable
distemper of approved brand and manufacture
and of required shade on wall surfaces to give an
even shade, over and including a priming coat
with alkali resistance primer of approved brand Rupees Seventy Five
after thoroughly brushing the surface and other And Paise Fifty Only
foreign matter and also including preparing the
surface even and sand parpered smooth.
220 Distempeing (One coats) with oil bound washable
distemper of approved brand and of required
shade on wall surfaces to give an even shade,
after thorouhly brushing the surface clean of all Rupees Twenty Eight
grease dirt, loose pieces of scales and also Sqm 1.00 28.57 And Paise Fifty Seven
including distempering with oil bound washable Only
distemper of preparing the surface even and
221 Extra over Item 44 to 46 for every subsequent Rupees Thirty One
coat of approved brand and manufacture. Sqm 1.00 31.24 And Paise Twenty
222 Extra over Item 44,45 for distempering with oil
bound washable distemper on celling and sloping Rupees Eight And
roofs. Paise Thirty Five Only
223 Extra over Item 46,47 for every subsequent coat
of distempering on celling and sloping roofs. Rupees Three And
Paise Thirty Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 21 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
224 Finishing wall with water proofing cement paint of
on wall surfaces (Two coats) to give an approved
brand and manufacture and of required shape
Rupees Sixty Five And
even shade after thoroughly brushing the surface Sqm 1.00 65.32
Paise Thirty Two Only
to remove all dirt and remains of loose powered
225 Extra over Item 51 for every subsequent coat of
water proofing cement paint of approved brand Rupees Thirty Three
and manufacture. Sqm 1.00 33.08
And Paise Eight Only
226 Extra over item 51 for finishing with cement paint
Rupees Six And Paise
on ceiling and sloping roofs. Sqm 1.00 6.69
Sixty Nine Only
227 Extra over item 53 for every subsequent coat of
Rupees Three And
finishing with cement paint on ceiling and sloping Sqm 1.00 3.34
Paise Thirty Four Only
228 Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including throughly brushing the surface free from Rupees Eighty Three
mortar droppings and other foreign matter and Sqm 1.00 83.18 And Paise Eighteen
sand papered smooth. Only
229 Extra over item 57 for every subsequent coat of
wall painting with plastic emulsion pain of Rupees Forty Two And
approved brand. Paise Fifty Five Only
230 Extra over item 57 for painting with plastic
Rupees Five And
emulsion paint of approved brand on ceilings and Sqm 1.00 5.52
Paise Fifty Two Only
231 Extra over item 59 for every subsequent coat of
painting with plastic emulsion paint on ceiling Sqm 1.00 2.18
Paise Eighteen Only
and slopping roofs.
232 Applying priming coat over new steel and other
metel surface after and including preparing the
surface by throughly cleaning, oil,grease, dirt and
Rupees Thirty Six And
other foreign matter and scoured with brushes Sqm 1.00 36.42
Paise Forty Two Only
fine steel wood, scrapers and sand paper with
ready mixed priming paint brushing red lead.
233 Painting two coats (excluding priming coat) on
new steel and other metal surface with enamel
Rupees Ninety One
paint, brushing, interior to give an even shade
Sqm 1.00 91.71 And Paise Seventy
including cleaning the surface an even shade
including cleanicn the surface of all dirt, dust and
other foreign matter.
234 Painting one coats (excluding priming coat) on
previously painted steel and other metal surface Rupees Fifty Seven
with enamel paint, brushing to give an even Sqm 1.00 57.64 And Paise Sixty Four
shade including cleaning the surface of all dirt, Only
dust and other foreign matter.
235 Extra over item 7 and 11 for every subsequent Rupees Fifty Seven
coat of paint Sqm 1.00 57.26 And Paise Twenty Six
236 Painting two coats (excluding priming coat) on
new steel and other metal surface with synthetic Rupees Sixty Eight
enamel paint, brushing to give an even shade Sqm 1.00 68.57 And Paise Fifty Seven
including cleaning the surface of all dirt, dust and Only
other foreign matter.
237 Painting one coats (excluding priming coat) on
previously printed steel and other metal surface
with synthetic enamel paint, brushing to give an Rupees Fifty Three
even shade including cleaning the surface of all Sqm 1.00 53.48 And Paise Forty Eight
dirt, dust and other foreign matter. Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 22 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
238 Extra over item 19 and 21 for every subsequent Rupees Fifty Three
coat of paint. Sqm 1.00 53.48 And Paise Forty Eight
239 Painting two coats (excluding priming coat) on
external surface of new rain water, soil, waste
and vent pipes and fittings with ready mixed
Rupees Twenty Two
bituminous brushing, black, anticorrosive to give
Sqm 1.00 22.55 And Paise Fifty Five
an even shade including cleaning of all dirt, dust
and other foreign matter. (B) 75mm dia.
240 Painting two coats (excluding priming coat) on
external surface of new rain water, soil, waste
and vent pipes and fittings with ready mixed
bituminous brushing, black, anticorrosive to give Rupees Twenty Eight
an even shade including cleaning of all dirt, dust And Paise Six Only
and other foreign matter. (C) 100mm dia.
241 Appliying priming coat over new wood and wood
based surface after and including preparing the
surface by throughly cleaning oil, grease, dirt and
Rupees Forty Two And
other foreign matter, sand papering and knotting. Sqm 1.00 42.60
Paise Sixty Only
(B) Ready mixed paint brushing wood primier
242 Appliying priming coat over new wood and wood
based surface after and including preparing the
surface by throughly cleaning oil, grease, dirt and
Rupees Forty Two And
other foreign matter, sand papering and knotting. Sqm 1.00 42.60
Paise Sixty Only
(C) Ready mixed paint brushing priming for
243 Extra over item 59 for every subsequent coat of
Rupees Forty Three
priming coat. (B) Ready mixed paint brushing
Sqm 1.00 43.13 And Paise Thirteen
wood primier pink.
244 Extra over item 59 for every subsequent coat of
Rupees Forty Three
priming coat. (C) Ready mixed paint brushing
Sqm 1.00 43.13 And Paise Thirteen
priming for enamel
245 Painting two coats (excluding priming coat) on
new wood and wood based surface with enamel
paint, interior to give an even shade including Rupees Ninety Two
cleaning the surface of all dirt, dust and other Sqm 1.00 92.38 And Paise Thirty Eight
foreign matter sand papering and stopping. Only
246 Painting one coats (excluding priming coat) on
previously painted wood and wood based
Rupees Fifty Eight And
surface with enamel paint, to give an even
Sqm 1.00 58.47 Paise Forty Seven
shade including cleaning the of all dirt, dust and
other foreign matter.
247 Extra over item 71 and 73 for every subsequent Rupees Fifty Seven
coat of paint. Sqm 1.00 57.26 And Paise Twenty Six
248 Painting two coats (excluding priming coat) on
new wood and wood based surface with ready
mixed paint, brushing, oil, gloss, semi gloss to Rupees One Hundred
give and even shade including cleaning of all Sqm 1.00 110.42 Ten And Paise Forty
dust, dirt and other foreign matter sand papering Two Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 23 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
249 Varnishing two coats (excluding priming coat) on
new wood and wood based surface under
coating with flatting varnish and finished coat with
Rupees Fifty Seven
varnish to give an even surface including
Sqm 1.00 57.96 And Paise Ninety Six
cleaning the surface of all dirt, dust and sand
papering so as to produce a smooth dry
250 Extra over item 84 for every subsequent coat of Rupees Thirty Two
varnish. Sqm 1.00 32.53 And Paise Fifty Three
251 Polishing with french polish on new wood and
wood based surface to give an even surface
Rupees One Hundred
including cleaning, the surface of all dirt, dust and
Sqm 1.00 141.98 Forty One And Paise
sand papering smooth and including a coat of
Ninety Eight Only
252 Polishing with french polish on previously
polished wood and wood based surface to give
Rupees Seventy Two
an even surface including cleaning, the surface
Sqm 1.00 72.82 And Paise Eighty Two
of all dirt, dust and sand papered smooth and
including a coat of wood filler.
253 Appliying wax polish on new wood and wood
surface with bees wax polish in proportion of
2:1.5 :1:0.5 (2-Bees wax : 1.5 Linseed oil : 1- Rupees Sixty Eight
Turpentine even surface including cleaning the Sqm 1.00 68.49 And Paise Forty Nine
surface of all dirt dust and sand papered smooth. Only
254 Appliying wax polish on previously wax polished
wood and wood based surface with bees wax
polish in proportion of 2:1.5 :1:0.5 (2-Bees wax :
Rupees Thirty Eight
1.5 Linseed oil : 1- Turpentine : 0.5 varnish by
Sqm 1.00 38.59 And Paise Fifty Nine
weight to give an even surface including cleaning
the surface of all dirt dust and sand papered
255 Coat tarring two coats on new wood and wood
based surfaces using 0.16 and 0.12 Litres of coal
tar par Sq.M. in the first and second coat Rupees Thirty Five
respectively to give an even shade including Sqm 1.00 35.92 And Paise Ninety Two
cleaning of all dirt, dust and other foreign matter. Only
256 Extra over item 19.98 or every subsequent coat
Rupees Twenty Four
of painth Sqm 1.00 24.05
And Paise Five Only
257 Writing letter or figures on any surface with black
japan paint (stops,comas, hyphens and the like Per
not to be measured and paid for separately)(i) Letter Rupees Three And
Block (Letters/Figures) (Per 10 Letter pet Per Paise Thirty Four Only
258 Writing letter or figures on any surface with black
japan paint (stops,comas, hyphens and the like
Letter Rupees Three And
not to be measured and paid for separately) (ii) 1.00 3.52
Per Paise Fifty Two Only
Indian (Letters/Figures)
259 Extra over items 19.119 for using thick white Per
paint instead of black japan paint. (i) Block Letter Rupees And Paise
(Letters/Figures) Per Seven Only
260 Extra over items 19.119 for using thick white Per
paint instead of black japan paint. (ii) Indian Letter Rupees And Paise
(Letters/Figures) Per Seven Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 24 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
261 Painting lines, deashes, arrows, letters etc on
roads, Air fields and like in two coats with road Rupees One Hundred
marking paint, brushing including cleaning the Sqm 1.00 129.61 Twenty Nine And
surface of all dirt, dust and other foreign matter. Paise Sixty One Only
(i) Over 10cm in width
262 Painting lines, deashes, arrows, letters etc on
roads, Air fields and like in two coats with road
Rupees Thirteen And
marking paint, brushing including cleaning the
Rmt 1.00 13.71 Paise Seventy One
surface of all dirt, dust and other foreign matter.
(ii) Upto 10 cm in width
263 Painting lines, deashes, arrows, letters etc on
roads, Air fields and like in one coats with road
marking paint, brushing including cleaning the Rupees Fifty Eight And
surface of all dirt, dust and other foreign matter. Paise Thirteen Only
(i) Over 10cm in width
264 Painting lines, deashes, arrows, letters etc on
roads, Air fields and like in one coats with road
marking paint, brushing including cleaning the Rupees Six And Paise
surface of all dirt, dust and other foreign matter. Nineteen Only
(ii) Upto 10 cm in width
265 Finishing wall with weather proof exterior
emulsion paint on wall surface (two coats) to give
an required shape even shade after thoroughly Rupees Seventy Three
brushing the surface to remove all dirt, and sqm 1.00 73.83 And Paise Eighty
remains of loose powdered materials.etc Three Only
266 Applying two coats of Birla or Asian acrylic lapy (
putty) & two coats of primer of approved brand
and manufacture on new wall surface to give an
even shade including thoroughly brushing the Rupees Forty And
surface free from mortar dropping and other Paise Fifty Nine Only
foreign matter and sand papered smooth.
267 Wall painting two coats with weather proof
acralic emulsion APEX Ultima or quivalent
segment in Brand of Nerolac or burger only type
paint of approved brand & manufacture and of
required shade on exterior wall surface to give
Rupees Two Hundred
an even shade over and including a primery coat
sqm 1.00 252.50 Fifty Two And Paise
with alkaly resistance primer of approved brand
after throughly brushing surface to remove all
dirt and remains of loose powdered materials etc
comp. for all height.
268 Wall painting (two coats) with plastic emulsion
paint of Asian Tractor emulsion Range selected
by engineer in charge or equivalent range in
Brand of Nerolac and Burger and manufacture on
undecorated wall surface to give an even shade Rupees Ninety And
including throughly brushing the surface free from Paise Ninety Only
mortar droppings and other foreign matter and
sand papered smooth.
269 Wall painting (two coats) with plastic emulsion
paint of Asian Appocolite emulsion Range
selected by engineer in charge or equivalent
range in Brand of Nerolac and Burger and Rupees Two Hundred
manufacture on undecorated wall surface to give Twenty Seven And
an even shade including throughly brushing the Paise Twenty Five
surface free from mortar droppings and other Only
foreign matter and sand papered smooth.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 25 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
270 Wall painting (two coats) with plastic emulsion
paint of Asian ROYAL emulsion Range selected
by engineer in charge or equivalent range in
Brand of Nerolac and Burger and manufacture on
undecorated wall surface to give an even shade
sqm 1.00 363.60 Hundred Sixty Three
including throughly brushing the surface free from
And Paise Sixty Only
mortar droppings and other foreign matter and
sand papered smooth.
271 Wall painting (two coats) with Texture paint of
Asian ROYAL Play Series Range selected by
engineer in charge or equivalent range in Brand
of Nerolac and Burger and manufacture on Rupees Four Hundred
undecorated wall surface to give an even shade sqm 1.00 424.20 Twenty Four And
including throughly brushing the surface free from Paise Twenty Only
mortar droppings and other foreign matter and
sand papered smooth.
272 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
Rupees One Hundred
materials and disposing off the excavated stuff
Cu.mt. 1.00 122.94 Twenty Two And Paise
upto 50 Meter lead.(A) Loose or soft soil
Ninety Four Only
273 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
Rupees One Hundred
materials and disposing off the excavated stuff
Cu.mt. 1.00 157.16 Fifty Seven And Paise
upto 50 Meter lead.(A) Loose or soft soil
274 Filling available excavated earth (excluding
rock) in trenches. plinth, sides of
Rupees One Hundred
foundations etc. in layers not exceeding 20 cm. in
Cu.mt. 1.00 136.92 Thirty Six And Paise
depth consolidating each disposited layer
Ninety Two Only
by ramming and watering.
275 Filling in plinth with sand under floors
Rupees Four Hundred
including watering ramming, consolidating and
Cu.mt. 1.00 444.75 Forty Four And Paise
dressing complete
Seventy Five Only
276 Filling in foundation and plinth with murrum or
Rupees Two Hundred
selected soil in layers of 20cm. thickness
Cu.mt. 1.00 270.30 Seventy And Paise
including watering, ramming and consolidating
277 Providing and laying cement concrete 1:3:6 (1- Rupees Two
Cement : 3- coarse sand : 6- hand broken stone Thousand Nine
aggregates 40 mmnominal size) and curing Cu.mt. 1.00 2978.97 Hundred Seventy
complete excluding cost of formwork in (A) Eight And Paise Ninety
Foundation and Plinth Seven Only
278 Providing and laying cement concrete 1:4:8 (1-
Cement : 4- coarse sand : 8- hand broken stone
Thousand Six Hundred
aggregates 40 mm nominal size) and curing Cu.mt. 1.00 2653.42
Fifty Three And Paise
complete excluding cost of formwork in (A)
Foundation and Plinth
279 Providing and laying cement concrete 1:2:4 (1-
Cement : 2- Coarse sand : 4- graded stone
Thousand Six Hundred
aggregates 20 mm nominal size) and curing Cu.mt. 1.00 3638.79
Thirty Eight And Paise
complete excluding cost of formwork in (A)
Seventy Nine Only
Foundation and Plinth
280 Providing TMT Bar FE 500/500D reinforcement
for R.C.C. work including bending, binding and
Kg. 1.00 77.29 Seven And Paise
placing in position complete upto floor two level
Twenty Nine Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 26 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
281 Providing and Laying ordinary cement concrete
1:2:4 (1- Cement 2- coarse sand : 4- graded
stone aggregates 20 mm nominal size) and Rupees Six Thousand
finishing smooth with curing etc. complete Eight Hundred Eighty
including the cost of formwork but excluding the Eight And Paise
cost of reinforsement for R.C.C work in (iii) Slabs Fifteen Only
having more than 10 cm and upto 13 cm.
282 Providing and laying ordinary cement concrete
1:2:4 (1- Cement 2- coarse sand : 4- graded
stone aggregates 20 mm nominal size) and Rupees Eight
finishing smooth with,curing etc. complete Thousand Five
including the cost of formwork but excluding the Hundred Ninety Three
cost of reinforcement for R.C.C work in (A) And Paise Eighty Only
BEAMS :(i) Having cross-sectional area 0.05 to
283 Providing and laying ordinary cement concrete
1:2:4 (1- Cement 2- coarse sand : 4- graded
stone aggregates 20 mm nominal size) and Rupees Twelve
finishing smooth with,curing etc. complete Thousand One
including the cost of formwork but excluding the Hundred Eighty Four
cost of reinforcement for R.C.C work in (B) And Paise Three Only
COLUMNS: (i) Having cross-sectional area
284 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost
of formwork and reinforcement for reinforced
Cu.mt. 1.00 3943.32 Hundred Forty Three
concrete work in (A) Foundations, footings, Base
And Paise Thirty Two
of columns and Mass concrete
285 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost Rupees Four
of formwork and reinforcement for reinforced Thousand Four
concrete work in (B) Walls, from top of Cu.mt. 1.00 4495.34 Hundred Ninety Five
foundation level upto floor two level And Paise Thirty Four
286 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost
of formwork and reinforcement for reinforced
concrete work in (C)
Cu.mt. 1.00 4468.71 Hundred Sixty Eight
Slabs,landing,shelves,Balconies Lintels,
And Paise Seventy
Beams, Girders and Cantilever upto floor two
287 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost Rupees Four
of formwork and reinforcement for reinforced Thousand Five
concrete work in (D) Columns, Pillars posts and Cu.mt. 1.00 4574.12 Hundred Seventy Four
struts upto floor two level. And Paise Twelve
288 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost Rupees Five
of formwork and reinforcement for reinforced Thousand Five
concrete work in (E) Staircases excluding landing Cu.mt. 1.00 5531.27 Hundred Thirty One
upto floor two level And Paise Twenty
289 Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost
of formwork and reinforcement for reinforced
Cu.mt. 1.00 4731.96 Hundred Thirty One
concrete work in (K) Vertical and Horizontial its
And Paise Ninety Six
upto floor two level.
290 Providing and laying and fixing 50 mm thick
expansion joint by hydro cell semi rigid UV
resistance with high performance laminated Cu.mt. 1.00 1491.03
Hundred Ninety One
closed cell polythene foam joint filler in sheet
And Paise Three Only
foam as directed, etc. complete.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 27 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
291 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
Rupees One Hundred
ceiling not exceeding 4 M. and removal of the
Cu.mt. 1.00 180.40 Eighty And Paise Forty
same for in situ reinforced concrete and plain
concrete work in. (A) Foundations Footings
Bases of Columns etc. and Mass concrete.
292 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
Rupees Two Hundred
ceiling not exceeding 4 M. and removal of the
Cu.mt. 1.00 267.25 Sixty Seven And Paise
same for in situ reinforced concrete and plain
Twenty Five Only
concrete work in. (B) Flat surfaces such as soffits
of supspened floors slabs Landings and the like.
(1) Floors etc. upto 200 mm in thickness.
293 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to Rupees Two Hundred
ceiling not exceeding 4 M. and removal of the Eighty Seven And
same for in situ reinforced concrete and plain Paise Twenty Nine
concrete work in. (B) Flat surfaces such as soffits Only
of suspended floor roof slabs Landings and the
like. (2) Floors etc. above 200mm in thickness.
294 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
Rupees Two Hundred
ceiling not exceeding 4 M. and removal of the
Cu.mt. 1.00 243.86 Forty Three And Paise
same for in situ reinforced concrete and plain
Eighty Six Only
concrete work in. (C) Vertical surface such as
walls (any thickness) partitions and the like
including attached buttresses & string course &
295 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to Rupees Three
ceiling not exceeding 4 M. and removal of the Cu.mt. 1.00 319.03 Hundred Nineteen And
same for in situ reinforced concrete and plain Paise Three Only
concrete work in. (G) Columns PillarsPosts and
struts. (1) Square Rectangular Polygonal in plan.
296 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to Rupees Four Hundred
ceiling not exceeding 4 M. and removal of the Cu.mt. 1.00 410.89 Ten And Paise Eighty
same for in situ reinforced concrete and plain Nine Only
concrete work in. (G) Columns PillarsPosts and
struts. (2)Circular or curved in Plan.
297 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
ceiling not exceeding 4 M. and removal of the Rupees Two Hundred
same for in situ reinforced concrete and plain Cu.mt. 1.00 207.12 Seven And Paise
concrete work in. (H) (1) Sides and soffits of Twelve Only
Beams Beam Haunchings cantilevers Girders
Bressumers and Lintels not exceeding 1 M. in
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 28 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
298 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
Rupees Two Hundred
ceiling not exceeding 4 M. and removal of the
Seventy Three And
same for in situ reinforced concrete and plain Cu.mt. 1.00 273.93
Paise Ninety Three
concrete work in. (H) (2) Sides and soffits of
Beams Beam Haunchings canti-levers Girders
Bressumers and Lintels exceeding 1M.in Depth.
299 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to Rupees Seventy Three
ceiling not exceeding 4 M. and removal of the Cu.mt. 1.00 73.34 And Paise Thirty Four
same for in situ reinforced concrete and plain Only
concrete work in. (I) Edges of slabs and
Breaks in floors and walls.
300 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
ceiling not exceeding 4 M. and removal of the Rupees Five Hundred
same for in situ reinforced concrete and plain Cu.mt. 1.00 564.56 Sixty Four And Paise
concrete work in. (K) Small surfaceassuch as Fifty Six Only
cantiever brackets and ends of steps caps and
basses to pilasters and Columns and the like.
301 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
Rupees One Hundred
ceiling not exceeding 4 M. and removal of the
Cu.mt. 1.00 173.59 Seventy Three And
same for in situ reinforced concrete and plain
Paise Fifty Nine Only
concrete work in. (L) Chullah Hoods, weather
shades Chhajjas Corbels etc. including edges.
302 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
ceiling not exceeding 4 M. and removal of the Rupees Two Hundred
same for in situ reinforced concrete and plain Cu.mt. 1.00 258.90 Fifty Eight And Paise
concrete work in. (M) Staircase with sloping or Ninety Only
stepped soffits including risers and stringers
excluding landing.
303 Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. height of
propping and centering below supporting floor to
ceiling not exceeding 4 M. and removal of the Rupees Four Hundred
same for in situ reinforced concrete and plain
Cu.mt. 1.00 404.21 Four And Paise
concrete work in. (Q) Vertical fins and vertical Twenty One Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 29 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
304 Providing and laying in position Ready Mixed M-
200 grade concrete for reinforced cement
conctere work , using cement content as per
approved Design Mix manufactured in fully
automatic batching plant and transported to site
of work in transit mixer for a lead up to 10 kms
having continuous agitated mixer, manufactured
as per mix design of specified grade for
reinforced cement concrete work including
pumping of R.M.C. from transit mixer to site of Rupees Four
laying, excluding the cost of centering shuttering Thousand Eight
finishing and reinforcement including cost of Hundred Forty Eight
admixtures in recommended proportions as per And Paise Sixty Only
IS: 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength
and durability as per direction of the Engineer -
in - charge. Without Fly Ash (Min cement level as
per latest IS 456 shall be maintained)
305 Providing and laying in position Ready Mixed M-
300 grade concrete for reinforced cement
conctere work , using cement content as per
approved Design Mix manufactured in fully
automatic batching plant and transported to site
of work in transit mixer for a lead up to 10 kms
having continuous agitated mixer, manufactured
as per mix design of specified grade for
reinforced cement concrete work including Rupees Five
pumping of R.M.C. from transit mixer to site of Thousand One
laying, excluding the cost of centering shuttering Cu.mt. 1.00 5113.37 Hundred Thirteen And
finishing and reinforcement including cost of Paise Thirty Seven
admixtures in recommended proportions as per Only
IS: 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength
and durability as per direction of the Engineer -
in - charge. Without Fly Ash (Min cement level as
per latest IS 456 shall be maintained) (Cement
306 Brick work using common burnt clay building Rupees Four
bricks having crushing strength not less than 35 Thousand Two
kg./Sq.Cm. in foundation and plinth in Cement Cu.mt. 1.00 4214.33 Hundred Fourteen And
Mortar 1:6 (1- Cement : 6 -fine sand)(B) Paise Thirty Three
Conventional (upto 10 ton) Only
307 Brick work using common burnt clay building
bricks having crushing strength not less than
kg./Sq.Cm. in foundation and plinthin Cu.mt. 1.00 4496.05
Hundred Ninety Six
superstructure above plinth level upto floor two
And Paise Five Only
level (B) Conventional
308 (i) Half brick masonry in common brunt clay
building bricks having crushing strength not less Rupees Six Hundred
than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Sq.mt. 1.00 629.84 Twenty Nine And
Cement : 4 -coarse sand ) in foundation and Paise Eighty Four Only
plinth (B) Conventional
309 (ii) Half brick masonry in common brunt clay
building bricks having crushing strength not less Rupees Six Hundred
than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Sq.mt. 1.00 618.79 Eighteen And Paise
Cement : 5 -coarse sand ) in foundation and Seventy Nine Only
plinth (B) Conventional
310 Providing 10mm thick cement plaster in single
coat on brick/concrete walls for interior plastering Rupees One Hundred
upto floor two level and finished even and smooth Sq.mt. 1.00 138.64 Thirty Eight And Paise
in (i)Cement mortar 1:3 (1-cement:3-sand) Sixty Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 30 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
311 Providing 10mm thick cement plaster in single
coat on brick/concrete walls for interior plastering Rupees One Hundred
upto floor two level and finished even and smooth Sq.mt. 1.00 125.12 Twenty Five And Paise
in (ii) Cement mortar 1:4 (1-cement :4-sand) Twelve Only
312 Providing 10mm thick cement plaster in single
coat on brick/concrete walls for interior plastering Rupees One Hundred
upto floor two level and finished even and smooth Sq.mt. 1.00 111.76 Eleven And Paise
in (iii) Cement mortar 1:6 (1-cement:6-sand) Seventy Six Only
313 Providing 15mm thick cement plaster in single
Rupees One Hundred
coat on Rough (Similar)side of single or half brick
Eighty Three And
walls for interior plastering upto floor two level Sq.mt. 1.00 183.73
Paise Seventy Three
and finished even and smooth in (i) Cement
mortar 1:3 (1-cement:3-sand)
314 Providing 15mm thick cement plaster in single
coat on Rough (Similar)side of single or half brick Rupees One Hundred
walls for interior plastering upto floor two level Sq.mt. 1.00 165.02 Sixty Five And Paise
and finished even and smooth in (ii) Cement Two Only
mortar 1:4 (1-cement :4-sand)
315 Providing 15mm thick cement plaster in single
coat on Rough (Similar)side of single or half brick Rupees One Hundred
walls for interior plastering upto floor two level Sq.mt. 1.00 145.65 Forty Five And Paise
and finished even and smooth in (iii) Cement Sixty Five Only
mortar 1:6 (1-cement:6-sand)
316 Providing 20mm thick cement plaster in single
coat on single or half brick walls for interior Rupees Two Hundred
plastering upto floor two level and finished even Sq.mt. 1.00 235.51 Thirty Five And Paise
and smooth in (i) Cement mortar 1:3 (1- Fifty One Only
317 Providing 20mm thick cement plaster in single
coat on single or half brick walls for interior Rupees Two Hundred
plastering upto floor two level and finished even Sq.mt. 1.00 208.79 Eight And Paise
and smooth in (ii) Cement mortar 1:4 (1-cement Seventy Nine Only
318 Extra over items 58 to 64 for finishing with a
floating coat of neat cement slurry. (upto 10 ton) Rupees Fifty And
Paise Sixty Two Only
319 20mm thick sand faced cement plaster on walls
upto height 10 metres above ground level
consisting of 12mm thick backing coat of C.M.
Sq.mt. 1.00 320.70 Hundred Twenty And
1:3 (1-cement : 3-sand) and 8mm thick finishing
Paise Seventy Only
coat of C.M. 1:1 (1-cement : 1-sand) etc.
320 Providing 20 mm thick double coat mala cement
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm
thick cement plaster in cement mortar (1 Cement
Rupees Two Hundred
: 4 coarse sand) in rough finishing and 8 mm
Sq.mt. 1.00 283.95 Eighty Three And
thick top coat of cement mortar 1:2 (1 Cement :
Paise Ninety Five Only
Coarse sand) finished with trovel including
scaffolding curing etc. complete.
321 Providing and laying 25 mm thick stone wash
plaster out for all floors to the brick or concrete
surface consisting of base coat of cement plaster
15 mm thick in C.M. 1:4 (1 cement : 4 sand) in
rough finish and top coat of 10 mm in white
cement and gray cement and role poser mix in
proportion 1:1 i.e. equal proportion with dolomite
power, white or colour chips of grade No.0 to 2 Rupees Six Hundred
required by volume and pigment mixed as Six Only
specified plaster will be washed out as directed
with drip with drip mould, pattern grooves as
approved pattern including scaffolding curing etc
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 31 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
322 Providing and applying on wall exterior/ interior of
Heritage surface texture granules finish of
Bakelite Hylam Limited (No.21-3005, 3006,
3008, 3013, 3014, 3015 and 3016) trowelled over
20 mm thick sand faced cement plastered (Two
coat of 12 mm in CM 1:3 & 8 mm coat in CM 1:1)
sub strata to get an average finish coat thickness
of 0.08 to 1.2 mm comprising of three
components viz. Dry granules, Granules, bonding
agent and top coat of glossy finish (Dry granules Rupees Eight Hundred
shall be made from Silica sand, pigments, chiefly Sq.mt. 1.00 878.70 Seventy Eight And
inorganic) homopolymer emulsion mix etc, of Paise Seventy Only
Bakelite Hylam product banding agent made of
acrylic copolymer emulsion, broad specturm
fungicide of Bakelite Hylam product etc and top
coat made from solvent based acrylic polymer of
Bakelite Hylam product including scaffolding.
323 Providing Heritage Grannular or Flakies Taxtured
wall finishing on plastered surface after removing
and scraping and sand papering the wall surface
and finishing coat with Acrylic coated Heritage
Grannular or Flakes in fair homogenious coating
Sq.mt. 1.00 709.02 Hundred Nine And
in clear matt finisher in approved design and
colour using Acrylic co-polymer bounding agent
for all height etc complete
324 Demolition and disposal of unserviceable
Rupees Five Hundred
materials with all lead and lift.(i) Lime concrete.
Cu.mt. 1.00 541.18 Forty One And Paise
325 Demolition and disposal of unserviceable
Rupees Six Hundred
materials with all lead and lift.(i) Lime concrete.
Cu.mt. 1.00 623.02 Twenty Three And
326 Demolition including stacking of serviceable
materilas and disposal of unserviceable materials Rupees One
with all lead and lift. (i) R.C.C. work Thousand Eighty Two
And Paise Thirty Five
327 Demolition of Brick work and stone masonry Rupees Three
including stacking of serviceable materilas and Hundred Seventy Four
disposal of unserviceable materials with all lead And Paise Fourteen
and lift. (i) In Lime Mortar. Only
328 Demolition of Brick work and stone masonry
including stacking of serviceable materilas and Rupees Five Hundred
disposal of unserviceable materials with all lead Cu.mt. 1.00 562.89 Sixty Two And Paise
and lift.(ii) In Cement Mortar. Eighty Nine Only
329 Dismentling steel work including distempering
and stacking the materials with all lead and lift. Rupees Three And
Paise Eighty Five Only
330 Removing and scraping of old deteriorated
plaster of any thickness fromm wall / R.C.C
member including stacking of serviceable Rupees Nineteen And
material and disposal of unserviceable from site Paise Eighty Nine Only
of work with all lead and lift
331 Providing and fixing M.S. fan clamps of shape
and size as specified in existing R.C.C. slab Rupees One Hundred
including cutting chase and making good. Seventy Eight And
Paise Seventy Three
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 32 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
332 Cutting out cracks of roof terrace to V- section
Rupees Sixty Eight
cleaning out, wetting , grouting with cement and
Rmt. 1.00 68.49 And Paise Forty Nine
sand slurry 1:3 (1-cement 3-sand ) (upto 10 ton)
333 Cutting out cracks roof terrace to V-Section
cleaning out and filling solidly with a hot mixture Rupees Seventy Eight
of bitumen and clean dry sand (1:1 by weight) Rmt. 1.00 78.84 And Paise Eighty Four
(upto 10 ton) Only
334 Providing and fixing 1.20 Metre high fencing with
2.0 Metre long M.S. Angle posts 40mm x 40 mm
x6 mm and oil painting 3 coats fixed at
Mt,C/c. with five Horizontan lines and two
diagonals of galvanised steel barbed wire
Hundred Ninety One
weighting 9.38 Kg. per 100 Metre, strained and Rmt. 1.00 391.93
And Paise Ninety
fixed to posts with G.I,staples including fixing the
postsin ground with 0.5 M x 0.5.M x 0.5 M. block
in C.C1:5:10 etc complete.
335 Applying general insecticide pest control
treatment to floors, cupboards etc including
labour material etc. complete. Using
Heptachloride 20 EC. As Per 6113_pests
Consentration Weight 0.50 percent is
recommended one litre chemical emulsion dillute Rupees Eighty And
with 39 liter of water will give. Total dillute Paise Eighty Four Only
concrentration will be 40 litre inclusive of one litre
chemical emulsion appication 0.5 Litre chemical
/ Sqm of surface is recommended as per I.S
336 Carring out plinth treatment to post construction /
existing structure by spraying chemical solution
for termite control treatment including labour and
material consistment with I.S.I specification.
Using Chlordene and Chiorpurfiles 20 EC. As Per
6131_paret-II Consentration Weight one percent
is recommended i.e one litre 20 EC chemical Rupees Eighty Six And
emulsion with 19 liter give 1 % concrentration Paise Eighty Six Only
inclusive of one litre chemical emulsion
appication at the rate of 5 Litre chemical / Sqm
of surface is recommended as per I.S
337 Carrying out wall treatment for termite control
including spraying with chemical solution in oil
base (0.5 Lit./ Sq.M.) including labour and
material Using Hepachlor concentration 20 EC.
As Per IS. 6316_paret-II Consentration by
Weight 0.50 percent is recommended i.e one litre
Rupees Thirty One
chemical emulsion dillute with 39 liter gof IS Sq.mt. 1.00 31.08
And Paise Eight Only
concrentration total dillite concentration will be
litre inclusive of one litre chemical emulsion
appication at the rate of 7.5 Litre chemical / Sqm
of surface is recommended as per I.S
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 33 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
338 Providing and filling the expansion joints for
mm width & 12 mm depth, with polysulphide
sealant with application of primer including
scraping / removing the expansion filler materials
from joints, cleaning, repairing of the edges with
epoxy mortar of approved color and make, fixing Rupees Four Hundred
of abro tapes on the edges to prevent the Sq.mt. 1.00 446.47 Forty Six And Paise
adjoining surface, etc. complete as directed by Forty Seven Only
Engineer-in-Charge. The contractor should
furnish a guarantee of 10 years as directed.
339 Providing and fixing in 25mm expansion joints,
Premolded Compressible fibre board made from
Polymer based in black colour approved make
Supreme or equivalent (Polyurethane foam filler)
of the best quality, including in all shapes and all Sq.mt. 1.00 1010.00
Thousand Ten Only
levels etc. complete as directed by Engineer-in-
Charge and as per specification.
340 Providing and fixing chain link fencing with M.S.
Angle posts 50 mm. X 50 mm. X 6 mm. &
Framing Work (40x40x6mm), Flat Intermedia
(32x3mm) and oil painting 3 coats fixed G.I.
chainlink Jali strained and fixed to posts with nut Rmt. 1.00 2119.12
Hundred Nineteen And
& bolts, including fixing posts in ground with 0.5m
Paise Twelve Only
x 0.5m block in C.C.1:2:4 etc. complete.
341 Constructing Manhole with R.C.C. top slab in
1:2:4 mix (1-cement :2-coarse sand : 4-graded
stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3- coarse sand :6-
Brick bats 40 + 50mm size) inside plastering
15mm thick with Cement Mortar 1:5 (1-Cement :
5-coarse sand) finished with a floating coat of
neat cement and making channels in cement
concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-
stone aggregate 20mm nominal size) finished
smooth complete including curing and festing (i) Rupees Eleven
Inside size 900mm x 1200mm and 1.5M. deep Thousand Forty Two
including C.I. cover with frame size 560mm And Paise Seventy
diameter total weight of cover and frame to be Four Only
not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.)(A) With 230mm thick walls
of brick msonry using brick having crushing
strength not less than 35Kg. / Sq.cm. in
Cement Mortar 1:5 (1- Cement: 5-Coarse sand)
(1) A type depth 0.90 Metre for 150mm
diameter sewer.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 34 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
342 Constructing Manhole with R.C.C. top slab in
1:2:4 mix (1-cement :2-coarse sand : 4-graded
stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3- coarse sand :6-
Brick bats 40 + 50mm size) inside plastering
15mm thick with Cement Mortar 1:5 (1-Cement :
5-coarse sand) finished with a floating coat of
neat cement and making channels in cement
concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-
stone aggregate 20mm nominal size) finished
Rupees Nineteen
smooth complete including curing and festing (i)
Inside size 900mm x 1200mm and 1.5M. deep
Nos. 1.00 19349.63 Hundred Forty Nine
including C.I. cover with frame size 560mm
And Paise Sixty Three
diameter total weight of cover and frame to be
not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.)(A) With 230mm thick walls
of brick msonry using brick having crushing
strength not less than 35Kg. / Sq.cm. in
Cement Mortar 1:5 (1- Cement: 5-Coarse
sand) (2) B type depth 1.50 Metre for 150mm
diameter sewer.
343 Constructing Manhole with R.C.C. top slab in
1:2:4 mix (1-cement :2-coarse sand : 4-graded
stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3- coarse sand :6-
Brick bats 40 + 50mm size) inside plastering
15mm thick with Cement Mortar 1:5 (1-Cement :
5-coarse sand) finished with a floating coat of
neat cement and making channels in cement
concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-
stone aggregate 20mm nominal size) finished
smooth complete including curing and festing (i) Rupees Twenty Three
Inside size 900mm x 1200mm and 1.5M. deep Thousand Four
including C.I. cover with frame size 560mm Hundred Seventy And
diameter total weight of cover and frame to be Paise Forty Eight Only
not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.)(A) With 230mm thick walls
of brick msonry using brick having crushing
strength not less than 35Kg. / Sq.cm. in
Cement Mortar 1:5 (1- Cement: 5-Coarse
sand) (3) C type depth 2.25 Metre for 150mm
diameter sewer.
344 Constructing Brick masonry road gully chamber
500mm x 450mm x 600mm including 500mm x
Thousand Seventeen
450mm C.I. horizontal grating wih frame Nos. 1.00 2017.19
And Paise Nineteen
complete. (upto 10 ton)
345 Constructing Brick masonry road gully chamber Rupees Two
450mm x 450mm x 775mm with vertical gating Thousand Five
complete. Nos. 1.00 2545.86 Hundred Forty Five
And Paise Eighty Six
346 Constructing brick masonry road gully chamber
1100mm x 775mm including 500mm x 450mm
(C.I. horizontal grating with frame and vertical
Nos. 1.00 8767.25 Hundred Sixty Seven
grating complete.) (upto 10 ton)
And Paise Twenty Five
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 35 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
347 Constructing brick masonry chamber for
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less
than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal dimensions
total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone
Each 1.00 2932.93 Hundred Thirty Two
aggregate 20mm size) foundation concrete
And Paise Ninety
1:5:10 inside plaster 15mm thick with cement
mortar 1:3 finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete.(i) Inside dimensions 455mmx 610mm
and 450mm deep for single pipe line. (upto
348 Constructing brick masonry chamber for
underground C.I. Inspection chamber and bends
with bricks having crushing strength not less than
35Kg/Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal dimensions
total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Rupees Three
cement :2- coarse sand :4-graded stone Thousand Six Hundred
aggregate 20mm size) foundation concrete Sixty And Paise
1:5:10 inside plaster 15mm thick with cement Seventy Six Only
mortar 1:3 finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 500mm x
mm and 450mm deep for pipe line with one or
349 Constructing brick masonry chamber for
underground C.I. Inspection chamber and bends
with bricks having crushing strength not less than
35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal dimensions
total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone Rupees Seven
aggregate 20mm size) foundation concrete Thousand One
1:5:10 inside plaster 15mm thick with cement Hundred Eighty And
mortar 1:3 finished smooth with a floating coat of Paise Forty Four Only
neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x
mm and 450mm deep for pipe lines with three
or more inlets.
350 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding Rupees One Hundred
watering and consolidation)(A) From Borrow Cu.mt. 1.00 109.08 Nine And Paise Eight
pits within land width Only
351 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding Rupees One Hundred
watering and consolidation)(B) From Borrow Cu.mt. 1.00 154.87 Fifty Four And Paise
area within 0.5 Km.lead Eighty Seven Only
352 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding Rupees One Hundred
watering and consolidation)(C) From Borrow Cu.mt. 1.00 157.91 Fifty Seven And Paise
area within 1.0 Km.lead Ninety One Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 36 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
353 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding Rupees One Hundred
watering and consolidation)(D) From Borrow Cu.mt. 1.00 163.69 Sixty Three And Paise
area within 2.0 Km. lead Sixty Nine Only
354 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding
watering and consolidation)(E) From Borrow Rupees One Hundred
area within 3.0 Km. lead (upto 10 ton) Cu.mt. 1.00 169.28 Sixty Nine And Paise
Twenty Eight Only
355 Providing and laying (Two level or slopes) and
jointing with stiff mixture or cement mortar in
proportion 1:1, salt glazed stone ware pipes
including testing of pipes and joints etc. complete
and Providing and laying Cement concrete 1:5:10
Rupees Six Hundred
(1-Cement : 5-Fine sand :10-Graded stone
Rmt. 1.00 636.59 Thirty Six And Paise
aggregate 40mm nominal size) bedding for
Fifty Nine Only
stoneware pipes (166mm Ave. bed thickness) of
following internal diameters with necessary
formwork and curing complete.(B) 200mm dia.
356 Housing Connection chamber light duty
Rupees Eight Hundred
Nos. 1.00 821.13 Twenty One And Paise
Rupees Nine Hundred
Nos. 1.00 929.20 Twenty Nine And
Paise Twenty Only
357 Providing and construction 3.00 mt inner dia and
6.50mt deep sock pit including excavation BBCC, Rupees Seventy Five
Brick masonary work at bottom and top including Thousand Two
RCC Slab at top in honey combica masonary in Nos. 1.00 75220.76 Hundred Twenty And
mud goober as directed. Paise Seventy Six
358 Providing construction of Septic tank of size
4.20x2.30x2.00 mt including necessary
excavation BBCC 1:5:10 Brick masonary work in
Rupees Seventy Two
CM 1:5 RCC top Slab M-200 half brick masonary
Nos. 1.00 72014.01 Thousand Fourteen
partition 15mm thick cement plaster in CM 1:4
And Paise One Only
main hole with C.I. cover etc. complete
359 Providing and laying water proofing treatment
with china mosaic tiles flooring over avg 50 mm
C.C. 1:2:4 bedding for maintaining slope for plain
and curve surface & 12 mm to 20 mm of broken
piece not more than 2.5CM of ceramic / glazed
tiles ( one for more colour as directed ) to be laid
over cement mortar bedding of C M 1:3 (1
cement : 3 sand ) contain water proofing Rupees One
materials per bag of cement useas specified by Thousand One
manufactured and slops to be tempered to bring Sq.mt. 1.00 1158.47 Hundred Fifty Eight
mortar up to surface with using white cement and And Paise Forty Seven
colour pigment including rounding of junctions Only
and extending them up to 15 cm along the wall
and curing with bends any patens or design as
per drawing and cleaning by using oxalic acid etc.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 37 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
360 Labour charges for making holes of required
diameter in RCC work including machineries Rupees One
required and finishing the surface smooth etc Thousand Six Hundred
complete as directed by Engineer in charge. Nos. 1.00 1626.10
Twenty Six And Paise
361 Providing and fixing Wire Fencing with "Y" Shape
1.20 meter height MS angle posts
40mmx40mmx6mm with oil painting of 2 coats on
Ms angle fixed at 1.50 meter Center to center
with circular shape galvanised steel barbed wire
wighting 9.38 Kg. per 100 meter stained and fixed
Rmt. 1.00 1360.47 Hundred Sixty And
to posts with GI staples including fixing the
Paise Forty Seven
position on compound wall with 0.23x0.23x0.30
block in C.C. 1:3:6 and also rounded MS coil wire
perifery on barbed wire etc. complete.
362 Providind and fixing 18"x24: PVC heavy duty Rupees One
cover with frame including all labour & other Thousand Five
fixtures and fastening etc complete as direction. Nos. 1.00 1533.18 Hundred Thirty Three
And Paise Eighteen
363 Providing and Laying Synroof Hi Build 2 mm thick
electrometric, premium quality acrylic coating as
a water proofing membrance finished which Rupees Six Hundred
consists a coat of Bitumen primer & 80 CSM Smt 1.00 686.80 Eighty Six And Paise
membrane on terrace with ultra violet resistance Eighty Only
and working upto any height
364 Providing and Laying Marble paste on china
mosaic flooring of Primium quality coating as a
Hundred Twenty Four
waterproofing membrane layer and working up to Smt 1.00 724.17
And Paise Seventeen
any hight as per directed by engineer in charge.
365 Providing erecting and fixing double coated
Syntex PVC. (ISI) water tank of required
Rupees Three And
capacity each with all necessary fittings and Liter 1.00 3.95
Paise Ninety Five Only
connection etc. complete on terrace.
366 Supplying and fixing (100 Liter) 3 Layer Anti
bacteria UPVC water Tank (Brand Astal, Syntex
Rupees Eleven And
or equivalent) with all labour charges etc Liter 1.00 11.11
Paise Eleven Only
complete as directed by Engineer in charge.
367 Providing and fixing to wall ceiling and floor
Kg. F/Cm2 working pressure poluthene pipes of
the following outside Dia. Low densidy, complete Rupees Two Hundred
with special falnge compression type fittings, wall Rmt. 1.00 280.23 Eighty And Paise
clipsetc. including making good the wall ceiling Twenty Three Only
and floor.(F)75 mm
368 Providing and fixing to wall ceiling and floor
Kg. F/Cm2 working pressure poluthene pipes of
the following outside Dia. Low densidy, complete Rupees Three
with special falnge compression type fittings, wall Rmt. 1.00 339.05 Hundred Thirty Nine
clipsetc. including making good the wall ceiling And Paise Five Only
and floor.(G)110 mm
369 Providing and fixing cast iron spigot and socket Rupees Seven
soil, waste and ventilating pipes of the following Rmt. 1.00 741.01 Hundred Forty One
nominal size.(B) 75mm dia. And Paise One Only
370 Providing and fixing cast iron spigot and socket
Rupees Eight Hundred
soil, waste and ventilating pipes of the following
Rmt. 1.00 892.39 Ninety Two And Paise
nominal size.(C) 100mm dia.
Thirty Nine Only
371 Providing and fixing in position cowel went to
pipes.(B) 75mm dia.
Nos. 1.00 393.04 Hundred Ninety Three
And Paise Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 38 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
372 Providing and fixing in position cowel went to
Rupees Five Hundred
pipes.(C) 100mm dia
Nos. 1.00 505.17 Five And Paise
373 Providing and fixing cast iron (Spun) Nahni trap
of the following nominal diameter of self cleaning
design with C.I. screaed down or higned grating
including cost of cutting and making good the Rupees Six Hundred
walls and floor 100mm inlet and 50mm outlet.(C) Nos. 1.00 646.41 Forty Six And Paise
100mm dia. Forty One Only
374 Providing and fixing water closet squatting Pan
(Indian type W.C. Pan) size 580mm (Earthwork,
bed concrete, foot reste and trap to be measured Rupees Nine Hundred
and paid for separately) (A) Vitreous China.(I) Nos. 1.00 992.15 Ninety Two And Paise
Long pattern = White colour Fifteen Only
375 Providing and fixing wsh down water closet
(European type, W.C. Pan) with integral P or S
trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1-Cement : 1-fine sand) Nos. 1.00 1356.81
Hundred Fifty Six And
(Seal and cover to be measured and paid for
Paise Eighty One Only
separately)(A) vitreous China Pattern :(i) in white
376 Providing and fixing 12.5 Litres low level flushing
cistern with a pair, of C.I. or Mild brackets,
complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with
polythene float, C.P brass handle unions and
couplings for connections, with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled Nos. 1.00 2370.39
Hundred Seventy And
flush bend including cutting holes in walls and
Paise Thirty Nine Only
making good the same connecting the flush bend
with cistern and closet (overflow pipe to be
measured and paid for separately)(A) Vitreous
China (I) In white colour
377 Providing and fixing 12.5 Litres high level C..I.
flushing cistern with A pair of C.I. or Mild steel
brackets, womplete with fittings such as syplionic
arrangement, 15mm nominal size brass ball
valve with polythene float, lever G.I. China (60
Nos. 1.00 1580.28 Hundred Eighty And
cm. ) and pull union and couplings for
Paise Twenty Eight
connections with inlet, outlet and overflow pipes
etc. including cutting holes in walls and making
good the same (overflow pipe to be measured
and paid fo separately)
378 Providing and fixing G.I. inlet connection for flush Rupees Sixty Eight
pipe with W.C. Pan Nos. 1.00 68.99 And Paise Ninety Nine
379 Providing and fixing plastic seat and cover for
Rupees Two Hundred
wash down water closer with C.P. brass hinges
Nos. 1.00 291.33 Ninety One And Paise
and rubber buffers. (B) Black plastic seal and
Thirty Three Only
380 Providing and fixing washbasin with single hole
for pillar tap with C.I. or M.S. brackets painted Rupees One
white including sutting holes and making good Thousand Five
the same but excluding fittings.(A) Vitreous Nos. 1.00 1526.65 Hundred Twenty Six
China:(ii) Flat Back washbasin 550 mm x v And Paise Sixty Five
400mm size. (i) In white colour. Only
381 Providing and fixing Kitchen sink with C.I. or M.S. Rupees Two
brackets, painted white including cutting holes in Thousand Three
walls and making good the same but excluding Nos. 1.00 2326.66 Hundred Twenty Six
fittings. (C) Vitreous China Sink.(i) 600mm x And Paise Sixty Six
450mm x 150mm size Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 39 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
382 Providing and fixing C.P. brass waste for Rupees Sixty Seven
washbasin or sink. (A) 32mmdia. Nos. 1.00 67.91 And Paise Ninety One
383 Providing and fixing C.P. brass waste for Rupees Eighty Nine
washbasin or sink. (B) 40mm dia Nos. 1.00 89.83 And Paise Eighty
384 Providing and fixing M.I. fisher union for Rupees Seventy Eight
washbasin or sink. (A) 32mm dia. Nos. 1.00 78.75 And Paise Seventy
385 Providing and fixing M.I. fisher union for Rupees Eighty Eight
washbasin or sink. (B) 40mm dia. Nos. 1.00 88.65 And Paise Sixty Five
386 Providing and fixing C.P. brass shower rose with
Rupees Two Hundred
15mm or 20mm inlet.(A) 100mm dia. Each
Nos. 1.00 282.16 Eighty Two And Paise
387 Providing and fixing 600mm x 450mm bevelled
edge mirror of superior glass mounted on 6mm Rupees Eight Hundred
thick A.C. sheet or plywood sheet and fixing to Nos. 1.00 859.41 Fifty Nine And Paise
wooden pluge with C.P. brass screws and Forty One Only
388 Providing and fixing C.P. brass towel rail comlete
Rupees Six Hundred
with C.P. brass brackets fixed to wooden plugs
Nos. 1.00 616.42 Sixteen And Paise
with C.P. brass scews.(B) 600mm x 20mm size.
389 Providing and fixing toilet paper holder.(A) C.P. Rupees Three
Brass Hundred Seventy Five
And Paise Eighty Two
390 Providing and fixing screw down bib taps of
Rupees One Hundred
following size.(A) Brass screw down bib tap
Nos. 1.00 186.83 Eighty Six And Paise
polished bright. (i) 15mm dia.
Eighty Three Only
391 Providing and fixing screw down bib taps of
Rupees Two Hundred
following size.(A) Brass screw down bib tap
Nos. 1.00 214.81 Fourteen And Paise
polished bright. (ii) 20mm dia.
Eighty One Only
392 Providing and fixing screw down bib taps of
Rupees One Hundred
following size.(B) Brass chromium plated screws
Nos. 1.00 186.83 Eighty Six And Paise
down Bib Tap. (i) 15mm dia.
Eighty Three Only
393 Providing and fixing screw down bib taps of
Rupees Two Hundred
following size.(B) Brass chromium plated screws
Nos. 1.00 214.81 Fourteen And Paise
down Bib Tap. (ii) 20mm dia. .
Eighty One Only
394 Providing and fixing screw down bib taps of
Rupees One Hundred
following size.(C) Gun metal screw down bib tap.
Nos. 1.00 158.86 Fifty Eight And Paise
Eighty Six Only
395 Providing and fixing screw down bib taps of
Rupees One Hundred
following size.(C) Gun metal screw down bib tap.
Nos. 1.00 177.85 Seventy Seven And
Paise Eighty Five Only
396 Providing and fixing pillar tap, capstan head, Rupees Three
screw down high pressure with screws, shanks Hundred Eight And
and back nuts. (i) 15mm dia. Paise Seventy Three
397 Providing and fixing pillar tap, capstan head, Rupees Three
screw down high pressure with screws, shanks Hundred Fifty Four
and back nuts. (ii) 20mm dia. And Paise Sixty Nine
398 Providing and fixing brass screw down stop
Rupees Two Hundred
tap.(A) 15mm dia.
Nos. 1.00 205.83 Five And Paise Eighty
399 Providing and fixing brass screw down stop
Rupees Two Hundred
tap.(C) 25mm dia.
Nos. 1.00 220.82 Twenty And Paise
Eighty Two Only
400 Providing and fixing Gun metal check or non-
return fullway wheel valve.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 40 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees One Hundred
Nos. 1.00 186.83 Eighty Six And Paise
Eighty Three Only
Rupees Two Hundred
Nos. 1.00 203.82 Three And Paise
Eighty Two Only
Rupees Four Hundred
Nos. 1.00 420.63 Twenty And Paise
Sixty Three Only
D) 32mm dia. Rupees Three
Hundred Fourteen And
Paise Seventy Three
Rupees Six Hundred
Nos. 1.00 663.43 Sixty Three And Paise
Forty Three Only
401 Providing and fixing chromium plated brass half
Rupees Two Hundred
trun flush cock of approved quality including
Nos. 1.00 263.77 Sixty Three And Paise
fixing in pipe line etc. complete.(ii) 25mm dia.
Seventy Seven Only
402 Providing and fixing chromium plated brass half
Rupees Two Hundred
trun flush cock of approved quality including
Seventy Five And
fixing in pipe line etc. complete.(iii) 32mm dia. Nos. 1.00 275.76
Paise Seventy Six
403 Providing and fixing Urinal or approved quality
including conecting the Urinal with waste pipe
Thousand Seventy
tap etc. complete.(A) White earthenware flat Nos. 1.00 1074.86
Four And Paise Eighty
back or corner type size 430mm x 260mm x
404 Providing and fixing Urinal of approved quality
including connection with trap and with integral
Thousand Six Hundred
longitudinal flush pipe.(A) Squating plate Nos. 1.00 1630.20
Thirty And Paise
pattern white earthenware 550mm x 300mm.
405 Providing and fixing Rubber plug for sink or wash
Rupees Seventeen
basin. Nos. 1.00 17.15
And Paise Fifteen Only
406 Providing and fixing chromium plated, bottle trap
with necessary couplings of approved quality for Rupees Two Hundred
wash basin. Nos. 1.00 295.80 Ninety Five And Paise
407 Providing and fixing ball cock of approved. quality
as directed.(A) Copper Metal (i) 25mm dia. Rupees One Hundred
Nos. 1.00 132.89 Thirty Two And Paise
Eighty Nine Only
408 Providing and fixing ball cock of approved. quality
Rupees One Hundred
as directed.(A) Copper Metal (ii) 50mm dia.
Nos. 1.00 189.84 Eighty Nine And Paise
Eighty Four Only
409 Providing and fixing C.I. Manhole cover 0.60 M. x
Rupees Nine Hundred
0.45M. size having weight not less than 35Kg.
Nos. 1.00 958.17 Fifty Eight And Paise
410 Providing and fixing G.I. Rain water spout of
Rupees One Hundred
50mm dia. and 30cm. length.
Nos. 1.00 101.91 One And Paise Ninety
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 41 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
411 Providing laying and jointing in true line and level
15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent
as approved by Engineer In Charge. Pipe shall Rupees Seventy Two
be fixed on the wall with the help of clamp at Rmt. 1.00 72.65 And Paise Sixty Five
every two metre C/C or shall be concelled as Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
412 Providing laying and jointing in true line and level
25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent
as approved by Engineer In Charge. Pipe shall Rupees Ninety One
be fixed on the wall with the help of clamp at Rmt. 1.00 91.84 And Paise Eighty Four
every two metre C/C or shall be concelled as Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
413 Providing laying and jointing in true line and level
32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent
as approved by Engineer In Charge. Pipe shall Rupees One Hundred
be fixed on the wall with the help of clamp at Rmt. 1.00 119.15 Nineteen And Paise
every two metre C/C or shall be concelled as Fifteen Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
414 Providing laying and jointing in true line and level
40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent
as approved by Engineer In Charge. Pipe shall Rupees One Hundred
be fixed on the wall with the help of clamp at Rmt. 1.00 148.12 Forty Eight And Paise
every two metre C/C or shall be concelled as Twelve Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
415 Providing laying and jointing in true line and level
50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent
as approved by Engineer In Charge. Pipe shall Rupees One Hundred
be fixed on the wall with the help of clamp at Rmt. 1.00 195.67 Ninety Five And Paise
every two metre C/C or shall be concelled as Sixty Seven Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 42 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
416 Providing, laying and jointing in true line and level
160diametre U.P.V.C (Type B) conforming to IS
13592-1992with one end plain and other end
socketed with rubberring, & fittings conforming to
ISI 14735-1999 ofapproved make for drainage
system pipe line, pipe shall
be jointed with each other with rubber lubricant,
pipeshall be fixed on wall using of PVC clamp of
Rupees Eight Hundred
the size 160mm diametre x 210 mm length x
Rmt. 1.00 834.38 Thirty Four And Paise
mm heigh at every2000 mm center to center or
Thirty Eight Only
shall be concealed in wallsas directed including
necessary fittings such as bends,
shoes etc. including testing of pipes and joints
andjointed with adhesive solvent cement
including cost of all materials
417 Providing, laying and jointing in true line and level
110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on Rupees One
wall using of PVC clamp of the size 110 mm Thousand Fifty Three
diametre x 149 mm length x 145 mm heigh at And Paise Seventy
every 2000 mm center to center or shall be Three Only
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed
with adhesive solvent cement including cost of all
418 Providing and fixing PVC SWR Nahni trap IS
14735 for drain - 100 mm diameter with jali of the Rupees Seven
following nominal diameter of self cleansing Hundred Thirty Three
design with C.I scread down or hinged grating And Paise Twenty Six
including the cost of cutting and making good the Only
419 Providing and fixing PVC SWR Nahni trap IS
14735 for drain - 75 mm diameter with jali of the Rupees Seven
following nominal diameter of self cleansing Hundred Eighteen And
design with C.I scread down or hinged grating Paise Twenty Two
including the cost of cutting and making good the Only
420 Providing and laying (to level or slopes) and
jointing with stiff mixture of Cement Mortar in Rupees Two Hundred
proportion 1:1 Selt glazed stoneware pipes Rmt. 1.00 225.51 Twenty Five And Paise
including testing of pipes and joints complete.(A) Fifty One Only
421 Providing and laying (to level or slopes) and
jointing with stiff mixture of Cement Mortar in
Hundred Seventeen
proportion 1:1 Selt glazed stoneware pipes Rmt. 1.00 317.38
And Paise Thirty Eight
including testing of pipes and joints complete.(B)
422 Providing and laying Cement concrete 1:5:10 (1-
Cement : 5-Fine sand :10-Graded stone
aggregate 40mm nominal size) bedding for Rupees One Hundred
stoneware pipes of following internal diameters Rmt. 1.00 127.16 Twenty Seven And
with necessary formwork and curing complete.(A) Paise Sixteen Only
100 mm dia. (112 mm Ave.bed thickness)
423 Providing and laying Cement concrete 1:5:10 (1-
Cement : 5-Fine sand :10-Graded stone
aggregate 40mm nominal size) bedding for Rupees Two Hundred
stoneware pipes of following internal diameters Rmt. 1.00 213.71 Thirteen And Paise
with necessary formwork and curing complete.(B) Seventy One Only
150mm dia. (166mm Ave. bed thickness)
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 43 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
424 Providing and fixing S.W. gully trap with C.I.
grating brick masonry chamber and water tight
C.I. cover with frame of 300mm x 300mm size
Nos. 1.00 1292.19 Hundred Ninety Two
(inside) with standard weight.(i) Square mouth
And Paise Nineteen
traps. (A) 100mm x 100mm size P type.
425 Providing and fixing S.W. gully trap with C.I.
grating brick masonry chamber and water tight
C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight.(i) Square mouth Nos. 1.00 1246.92
Hundred Forty Six And
traps. (A) 150mm x 100mm size P type. (SOR
Paise Ninety Two Only
426 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for culverts
Rupees Six Hundred
carrying heavy traffic as per IS 458-1991
Seventy Seven And
specifications including setting the pipes in C.M. Rmt. 1.00 677.97
Paise Ninety Seven
1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters.(i)
427 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for culverts
carrying heavy traffic as per IS 458-1991
Thousand Seventy
specifications including setting the pipes in C.M. Rmt. 1.00 1077.03
Seven And Paise
1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters.(ii)
428 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for culverts
carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. Rmt. 1.00 1400.79
Hundred And Paise
1:2 watering and laying (to level or slopes) of
Seventy Nine Only
class NP3 of following internal daimeters.(iii)
429 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for culverts
carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. Rmt. 1.00 2212.06
Hundred Twelve And
1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters.(v)
430 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for culverts Rupees Three
carrying heavy traffic as per IS 458-1991 Thousand Two
specifications including setting the pipes in C.M. Rmt. 1.00 3225.28 Hundred Twenty Five
1:2 watering and laying (to level or slopes) of And Paise Twenty
class NP3 of following internal daimeters.(vii) Eight Only
431 Supplying and fixing of CP brass Long Body Bib
Cock with wall flange and aerator (ESSCO or DBI
or equivalent Brand) with 3 year Warantty. Nos. 1.00 2203.82
Hundred Three And
Paise Eighty Two Only
432 Supplying and fixing of CP brass Short Body Bib Rupees One
Cock with wall flange and aerator (ESSCO or DBI Thousand Three
or equivalent Brand) with 3 year Warantty. Nos. 1.00 1395.82 Hundred Ninety Five
And Paise Eighty Two
433 Providing and fixing Wall Hung WC with PP Soft
Close Slim seat cover, Hinges, Acessrories Set Rupees Ten Thousand
of Size 345x510x360mm incl. Labour work for Four Hundred Sixty
fitting etc complete as directed. Eight And Paise Sixty
434 Providing and fixing Table top wash basin of Size
475x360x130mm (Brand ESSCO / Varmora or Rupees Six Thousand
equovalent) with necessary fixture and fastening Seven Hundred Forty
etc complete as directed. Eight And Paise Eighty
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 44 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
435 Providing and fixing CP Brass Long Body Pillar Rupees Four
cock for Wash Basin with necessary fixtures and Thousand Twenty One
fastening etc complete as directed with Warantty And Paise Eighty Two
of 3 Years Only
436 Providing and fixing CP Brass Long Body Bib Tap Rupees One
with wall Flange for Kitchen Sink with necessary Thousand Seven
fixtures and fastening etc complete as directed Nos. 1.00 1799.82 Hundred Ninety Nine
with Warantty of 3 Years And Paise Eighty Two
437 Providing and fixing CP Brass 3 in 1 Wall Mixture
Rupees Six Thousand
for (Brand ESSCO or equovalent) with necessary
Two Hundred Ninety
fixtures and fastening etc complete as directed Nos. 1.00 6294.32
Four And Paise Thirty
with Warantty of 3 Years
438 Providing and fixing CP Brass Basin inlet
Rupees Nine Hundred
connection (Angle Valve) with necessary fixtures
Nos. 1.00 991.82 Ninety One And Paise
and fastening etc complete as directed with
Eighty Two Only
Warantty of 3 Years
439 Providing and fixing CP Brass Concealed Stop Rupees One
cock heavy body with cap Basin inlet connection Thousand One
with necessary fixtures and fastening etc Nos. 1.00 1193.82 Hundred Ninety Three
complete as directed with Warantty of 3 Years And Paise Eighty Two
(A) 15mm Dia Only
440 Providing and fixing CP Brass Concealed Stop
cock heavy body with cap Basin inlet connection
Thousand Six Hundred
with necessary fixtures and fastening etc Nos. 1.00 1698.82
Ninety Eight And Paise
complete as directed with Warantty of 3 Years
Eighty Two Only
441 Providing and fixing CP Brass Over head Shower
100mm dia Round / Sqare shape single flow with Rupees One
rubit cleaning system with SS connection pipe & Thousand Seven
Wall Flange with necessary fixtures and fastening Nos. 1.00 1799.82 Hundred Ninety Nine
etc complete as directed with Warantty of 3 And Paise Eighty Two
442 Providing and fixing Floor Nahni Trap IS
(SWELL or equivent Brand) for drain - 100 mm
diameter with Double jali & 12 cm deep of the
following nomonal diameter of self cleansing
Nos. 1.00 1749.32 Hundred Forty Nine
design with C.I. scread down or hinged grating
And Paise Thirty Two
including the cost of cutting and making good the
walls. with Warantty of 3 Years
443 Providing and fixing Bottle trap for (Brand
ESSCO or equovalent) with necessary fixtures
Thousand Six Hundred
and fastening etc complete as directed. Nos. 1.00 1698.82
Ninety Eight And Paise
Eighty Two Only
444 Providing and fixing SS 150mm long Revate
Rupees Five Hundred
Bolts for fixing wall hung wash basin with
Nos. 1.00 587.82 Eighty Seven And
washer/buffer incl. Labour work etc complete as
Paise Eighty Two Only
directed. with Warantty of 3 Years
445 Providing and fixing CP Brass Shower Cock with Rupees One
wall flange(Brand ESSCO or equovalent) with Thousand Ninety Two
necessary fixtures and fastening incl. labour cost And Paise Eighty Two
etc complete as directed. Only
446 Providing and fixing Metropole flush valve regular
40 mm size (concealed body) with exposed shut Rupees Five
off provision and 100 mm square plate (Brand Thousand Seven
Jaquar, ESSCO or equovalent) with necessary Nos. 1.00 5738.82 Hundred Thirty Eight
fixture and fastening etc complete as directed. And Paise Eighty Two
(warranty period of 5 years) Only
447 Providing and fixing Hand faucet ABS body with
mm dia. 1.20meter long flexible Pipe with wall Rupees Two
hook (Brand Jaquar, ESSCO or equovalent) Nos. 1.00 2001.82 Thousand One And
complete as directed. Warranty of 3 years. Paise Eighty Two Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 45 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
448 Providing and fixing Waste coupling half/full
Rupees Six Hundred
thread, 40 mm for Basin as per direction by
Nos. 1.00 638.32 Thirty Eight And Paise
Engineer in charge.
Thirty Two Only
449 Supplying of UPVC TEE SCH-80 as per
(A) 20mm Dia Rupees Twenty Four
Nos. 1.00 24.44 And Paise Forty Four
(B) 25mm Dia Rupees Thirty Three
Nos. 1.00 33.33 And Paise Thirty Three
(C) 32mm Dia Rupees Fifty Eight And
Nos. 1.00 58.88 Paise Eighty Eight
(D) 40mm Dia Rupees Eighty Five
Nos. 1.00 85.55 And Paise Fifty Five
Rupees One Hundred
Nos. 1.00 114.43 Fourteen And Paise
Forty Three Only
Rupees One Hundred
Nos. 1.00 183.32 Eighty Three And
Paise Thirty Two Only
(G) 75mm Dia Rupees Three
Hundred Sixty Two
And Paise Nineteen
Rupees Five Hundred
Nos. 1.00 528.84 Twenty Eight And
Paise Eighty Four Only
Rupees Nine Hundred
Nos. 1.00 934.35 Thirty Four And Paise
Thirty Five Only
450 Supplying of UPVC 45 Degree Elbow SCH-80 as
(A) 20mm Dia Rupees Fifteen And
Paise Fifty Five Only
(B) 25mm Dia Rupees Twenty Three
Nos. 1.00 23.33 And Paise Thirty Three
(C) 32mm Dia Rupees Thirty Five
Nos. 1.00 35.55 And Paise Fifty Five
Rupees Fifty Four And
Paise Forty Four Only
(E) 50mm Dia Rupees Seventy One
And Paise Ten Only
Rupees One Hundred
Nos. 1.00 112.21 Twelve And Paise
Twenty One Only
(G) 75mm Dia Rupees Two Hundred
Twenty Nine And
Paise Ninety Eight
(H) 90mm Dia Rupees Three
Hundred Twenty Nine
And Paise Ninety
(I) 110mm Dia Rupees Five Hundred
Nos. 1.00 565.50 Sixty Five And Paise
451 Supplying of UPVC 90 Degree Elbow as SCH-80
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 46 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees Eighteen And
Paise Eighty Nine Only
(B) 25mm Dia Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
(C) 32mm Dia Rupees Forty Four
Nos. 1.00 44.44 And Paise Forty Four
Rupees Sixty Five And
Paise Fifty Five Only
Rupees Eighty Six And
Paise Sixty Six Only
(F) 63mm Dia Rupees One Hundred
Twenty Eight And
Paise Eighty Eight
Rupees Two Hundred
Nos. 1.00 282.19 Eighty Two And Paise
Rupees Four Hundred
Nos. 1.00 418.85 Eighteen And Paise
Eighty Five Only
Rupees Six Hundred
Nos. 1.00 699.93 Ninety Nine And Paise
Ninety Three Only
452 Supplying of UPVC 90 Degree Brass Elbow SCH-
80 as per direction.
Rupees One Hundred
Nos. 1.00 152.21 Fifty Two And Paise
Twenty One Only
Rupees One Hundred
Nos. 1.00 194.43 Ninety Four And Paise
Forty Three Only
(C) 32mm Dia Rupees Three
Hundred Seventy Five
And Paise Fifty Two
453 Supplying of UPVC Reducing 90 Degree Brass
Elbow SCH-80 as per direction.
(A) 25x20mm Dia Rupees One Hundred
Seventy Two And
Paise Twenty One
(B) 32x20mm Dia
Rupees One Hundred
Nos. 1.00 189.98 Eighty Nine And Paise
Ninety Eight Only
(C) 32x25mm Dia Rupees Two Hundred
Twenty Eight And
Paise Eighty Seven
454 Supplying of UPVC Brass TEE SCH-80 as per
Rupees One Hundred
Nos. 1.00 159.98 Fifty Nine And Paise
Ninety Eight Only
(B) 25mm Dia Rupees Two Hundred
Nos. 1.00 201.09 One And Paise Nine
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 47 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(C) 32mm Dia Rupees Three
Hundred Eighty Six
And Paise Sixty Three
(D) 25x20mm Dia
Rupees One Hundred
Nos. 1.00 173.32 Seventy Three And
Paise Thirty Two Only
(E) 32x20mm Dia
Rupees One Hundred
Nos. 1.00 195.54 Ninety Five And Paise
Fifty Four Only
(F) 32x25mm Dia
Rupees Two Hundred
Nos. 1.00 239.98 Thirty Nine And Paise
Ninety Eight Only
(G) 40x20mm Dia
Rupees Two Hundred
Nos. 1.00 235.53 Thirty Five And Paise
Fifty Three Only
455 Supplying of UPVC Threaded Elbow SCH-80 as
Rupees Eighteen And
Paise Eighty Nine Only
(B) 25mm Dia Rupees Twenty Eight
Nos. 1.00 28.89 And Paise Eighty Nine
Rupees Fifty One And
Paise Eleven Only
(D) 40mm Dia Rupees Seventy Six
Nos. 1.00 76.66 And Paise Sixty Six
Rupees One Hundred
Nos. 1.00 102.21 Two And Paise Twenty
(F) 63mm Dia Rupees One Hundred
Nos. 1.00 156.65 Fifty Six And Paise
Sixty Five Only
456 Supplying of UPVC Threaded TEE Elbow SCH-
80 as per direction.
(A) 20mm Dia Rupees Twenty Two
Nos. 1.00 22.22 And Paise Twenty Two
(B) 25mm Dia Rupees Thirty Two
Nos. 1.00 32.32 And Paise Thirty Two
Rupees Fifty Two And
Paise Fifty Two Only
(D) 40mm Dia Rupees Seventy Five
Nos. 1.00 75.75 And Paise Seventy
(E) 50mm Dia Rupees One Hundred
Nos. 1.00 103.02 Three And Paise Two
Rupees One Hundred
Nos. 1.00 158.57 Fifty Eight And Paise
Fifty Seven Only
457 Supplying of UPVC END CAP SCH-80 as per
Rupees Eight And
Paise Eighty Nine Only
(B) 25mm Dia Rupees Thirteen And
Nos. 1.00 13.33 Paise Thirty Three
(C) 32mm Dia Nos. 1.00 20.00 Rupees Twenty Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 48 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(D) 40mm Dia Rupees Thirty Two
Nos. 1.00 32.22 And Paise Twenty Two
Rupees Forty One And
Paise Eleven Only
(F) 63mm Dia Rupees Sixty Two And
Nos. 1.00 62.22 Paise Twenty Two
(G) 75mm Dia Rupees One Hundred
Nos. 1.00 105.55 Five And Paise Fifty
Rupees One Hundred
Nos. 1.00 165.54 Sixty Five And Paise
Fifty Four Only
(I) 110mm Dia Rupees Three
Hundred Seven And
Paise Seventy Five
458 Supplying of UPVC UNION SCH-80 as per
Rupees Forty Five And
Paise Fifty Five Only
(B) 25mm Dia Rupees Fifty Eight And
Nos. 1.00 58.88 Paise Eighty Eight
(C) 32mm Dia Rupees Ninety Two
Nos. 1.00 92.21 And Paise Twenty One
Rupees One Hundred
Nos. 1.00 126.65 Twenty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 182.20 Eighty Two And Paise
(F) 63mm Dia Rupees Two Hundred
Nos. 1.00 261.09 Sixty One And Paise
(G) 75mm Dia Rupees Five Hundred
Seventy Three And
Paise Twenty Eight
(H) 90mm Dia Rupees Seven
Hundred Eighty Five
And Paise Forty Eight
(I) 110mm Dia Rupees One
Nos. 1.00 1180.99 Hundred Eighty And
Paise Ninety Nine
459 Supplying of UPVC STEP OVER BAND SCH-80
as per direction.
(A) 20mm Dia Rupees Sixty Six And
Paise Sixty Six Only
(B) 25mm Dia Rupees Ninety Seven
Nos. 1.00 97.77 And Paise Seventy
Rupees One Hundred
Nos. 1.00 149.99 Forty Nine And Paise
Ninety Nine Only
Rupees Two Hundred
Nos. 1.00 256.64 Fifty Six And Paise
Sixty Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 49 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(E) 50mm Dia Rupees Three
Hundred Forty Eight
And Paise Eighty Five
Rupees Five Hundred
Nos. 1.00 576.61 Seventy Six And Paise
460 Supplying of UPVC TANK NIPPLE SCH-80 as
(A) 20mm Dia Rupees Thirty Seven
Nos. 1.00 37.77 And Paise Seventy
(B) 25mm Dia Nos. 1.00 50.00 Rupees Fifty Only
(C) 32mm Dia Rupees Seventy Five
Nos. 1.00 75.55 And Paise Fifty Five
Rupees Eighty Six And
Paise Sixty Six Only
(E) 50mm Dia Rupees Ninety Seven
Nos. 1.00 97.77 And Paise Seventy
Rupees One Hundred
Nos. 1.00 133.32 Thirty Three And Paise
Thirty Two Only
Rupees Two Hundred
Nos. 1.00 247.75 Forty Seven And Paise
Seventy Five Only
(H) 90mm Dia Rupees Three
Hundred Seventy Four
And Paise Forty One
(I) 110mm Dia Rupees Seven
Hundred Thirty Eight
And Paise Eighty Two
461 Supplying of UPVC COMPACT BALL VALVE
SCH-80 as per direction.
Rupees One Hundred
Nos. 1.00 166.65 Sixty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 199.98 Ninety Nine And Paise
Ninety Eight Only
Rupees Two Hundred
Nos. 1.00 233.31 Thirty Three And Paise
Thirty One Only
Rupees Two Hundred
Nos. 1.00 266.64 Sixty Six And Paise
Sixty Four Only
Rupees Two Hundred
Nos. 1.00 294.42 Ninety Four And Paise
Nos. 1.00 333.30 Hundred Thirty Three
And Paise Thirty Only
(G) 75mm Dia Rupees Three
Nos. 1.00 361.08 Hundred Sixty One
And Paise Eight Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 50 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(H) 90mm Dia Rupees Three
Hundred Eighty Eight
And Paise Eighty Five
(I) 110mm Dia Rupees Four Hundred
Twenty Seven And
Paise Seventy Four
462 Supplying of UPVC LONG BEND SCH-80 as per
Rupees Sixty One And
Paise Eleven Only
(B) 25mm Dia Rupees Eighty Two
Nos. 1.00 82.21 And Paise Twenty One
(C) 32mm Dia Rupees Ninety Three
Nos. 1.00 93.32 And Paise Thirty Two
(D) 40mm Dia Rupees One Hundred
Seventy Two And
Paise Twenty One
(E) 50mm Dia Rupees Two Hundred
Nos. 1.00 205.54 Five And Paise Fifty
(F) 63mm Dia Rupees Two Hundred
Nos. 1.00 261.09 Sixty One And Paise
Nos. 1.00 333.30 Hundred Thirty Three
And Paise Thirty Only
(H) 90mm Dia Rupees Three
Hundred Ninety Nine
And Paise Ninety Six
Rupees Four Hundred
Nos. 1.00 499.95 Ninety Nine And Paise
Ninety Five Only
463 Supplying of UPVC BALL HANDLE VALVE SCH-
80 as per direction.
(A) 20mm Dia Rupees Twenty Four
Nos. 1.00 24.44 And Paise Forty Four
(B) 25mm Dia Rupees Thirty Two
Nos. 1.00 32.22 And Paise Twenty Two
Rupees Fifty Five And
Paise Fifty Five Only
(D) 40mm Dia Rupees Sixty Six And
Paise Sixty Six Only
Rupees Eighty Six And
Paise Sixty Six Only
Rupees One Hundred
Nos. 1.00 157.76 Fifty Seven And Paise
Seventy Six Only
464 Supplying of PIPE CLIP SCH-80 as per direction.
(A) 20mm Dia Rupees Three And
Nos. 1.00 3.33 Paise Thirty Three
Rupees Six And Paise
Sixty Seven Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 51 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(C) 32mm Dia Rupees Seven And
Nos. 1.00 7.78 Paise Seventy Eight
(D) 40mm Dia Rupees Seven And
Nos. 1.00 7.78 Paise Seventy Eight
Rupees Twenty One
And Paise Eleven Only
(F) 63mm Dia Rupees Twenty Four
Nos. 1.00 24.44 And Paise Forty Four
(G) 75mm Dia Rupees Twenty Eight
Nos. 1.00 28.89 And Paise Eighty Nine
(H) 90mm Dia Rupees Thirty Two
Nos. 1.00 32.22 And Paise Twenty Two
(I) 110mm Dia Rupees Thirty Seven
Nos. 1.00 37.77 And Paise Seventy
465 Supplying of MON RETURN VALVE SCH-80 as
Nos. 1.00 314.41 Hundred Fourteen And
Paise Forty One Only
Rupees Four Hundred
Nos. 1.00 458.84 Fifty Eight And Paise
Eighty Four Only
466 Supplying of REDUCER as per direction.
25x20 Rupees Seventeen
Nos. 1.00 17.78 And Paise Seventy
Rupees Thirty One
And Paise Eleven Only
32x25 Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
40x20 Rupees Forty Two And
Nos. 1.00 42.22 Paise Twenty Two
Rupees Forty Six And
Paise Sixty Six Only
40x32 Nos. 1.00 40.00 Rupees Forty Only
50x20 Nos. 1.00 50.00 Rupees Fifty Only
50x25 Rupees Fifty Three
Nos. 1.00 53.33 And Paise Thirty Three
Rupees Sixty One And
Paise Eleven Only
50x40 Rupees Fifty Three
Nos. 1.00 53.33 And Paise Thirty Three
63x20 Rupees Seventy Four
Nos. 1.00 74.44 And Paise Forty Four
63x25 Rupees Seventy Five
Nos. 1.00 75.55 And Paise Fifty Five
63x32 Rupees Eighty Seven
Nos. 1.00 87.77 And Paise Seventy
63x40 Rupees Ninety One
And Paise Ten Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 52 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
63x50 Rupees Ninety Two
Nos. 1.00 92.21 And Paise Twenty One
75x20 Rupees One Hundred
Nos. 1.00 116.66 Sixteen And Paise
Rupees One Hundred
Nos. 1.00 117.77 Seventeen And Paise
Seventy Seven Only
75x32 Rupees One Hundred
Nos. 1.00 115.54 Fifteen And Paise Fifty
Rupees One Hundred
Nos. 1.00 138.88 Thirty Eight And Paise
Eighty Eight Only
Rupees One Hundred
Nos. 1.00 143.32 Forty Three And Paise
Thirty Two Only
Rupees One Hundred
Nos. 1.00 146.65 Forty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 157.76 Fifty Seven And Paise
Seventy Six Only
90x25 Rupees One Hundred
Nos. 1.00 161.10 Sixty One And Paise
Rupees One Hundred
Nos. 1.00 165.54 Sixty Five And Paise
Fifty Four Only
Rupees One Hundred
Nos. 1.00 165.54 Sixty Five And Paise
Fifty Four Only
Rupees One Hundred
Nos. 1.00 186.65 Eighty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 194.43 Ninety Four And Paise
Forty Three Only
Rupees Two Hundred
Nos. 1.00 217.76 Seventeen And Paise
Seventy Six Only
Rupees Two Hundred
Nos. 1.00 269.97 Sixty Nine And Paise
Ninety Seven Only
Rupees Two Hundred
Nos. 1.00 271.08 Seventy One And
Paise Eight Only
Rupees Two Hundred
Nos. 1.00 273.31 Seventy Three And
Paise Thirty One Only
Rupees Two Hundred
Nos. 1.00 276.64 Seventy Six And Paise
Sixty Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 53 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees Two Hundred
Nos. 1.00 278.86 Seventy Eight And
Paise Eighty Six Only
Rupees Two Hundred
Nos. 1.00 284.42 Eighty Four And Paise
110x75 Rupees Three
Hundred Forty Seven
And Paise Seventy
Nos. 1.00 356.63 Hundred Fifty Six And
Paise Sixty Three Only
467 Supplying of REDUCER TEE as per direction.
25x20 Rupees Thirty Five
Nos. 1.00 35.55 And Paise Fifty Five
32x20 Rupees Fifty Six And
Paise Sixty Six Only
32x25 Rupees Fifty Six And
Paise Sixty Six Only
40x20 Rupees Eighty One
And Paise Ten Only
Rupees Eighty Six And
Paise Sixty Six Only
40x32 Rupees Ninety Five
Nos. 1.00 95.55 And Paise Fifty Five
Rupees One Hundred
Nos. 1.00 112.21 Twelve And Paise
Twenty One Only
50x25 Rupees One Hundred
Nos. 1.00 115.54 Fifteen And Paise Fifty
Rupees One Hundred
Nos. 1.00 122.21 Twenty Two And Paise
Twenty One Only
50x40 Rupees One Hundred
Twenty Nine And
Paise Ninety Nine
Rupees One Hundred
Nos. 1.00 176.65 Seventy Six And Paise
Sixty Five Only
63x25 Rupees One Hundred
Seventy Seven And
Paise Seventy Six
Rupees Two Hundred
Nos. 1.00 203.31 Three And Paise Thirty
Rupees One Hundred
Nos. 1.00 189.98 Eighty Nine And Paise
Ninety Eight Only
63x50 Rupees One Hundred
Ninety Seven And
Paise Seventy Six
75x20 Rupees Three
Nos. 1.00 311.08 Hundred Eleven And
Paise Eight Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 54 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
75x25 Rupees Three
Nos. 1.00 312.19 Hundred Twelve And
Paise Nineteen Only
75x32 Rupees Three
Nos. 1.00 315.52 Hundred Fifteen And
Paise Fifty Two Only
75x40 Rupees Three
Nos. 1.00 321.08 Hundred Twenty One
And Paise Eight Only
Nos. 1.00 323.30 Hundred Twenty Three
And Paise Thirty Only
75x63 Rupees Three
Hundred Thirty Two
And Paise Nineteen
Rupees Four Hundred
Nos. 1.00 455.51 Fifty Five And Paise
90x25 Rupees Four Hundred
Nos. 1.00 456.62 Fifty Six And Paise
Rupees Four Hundred
Nos. 1.00 459.95 Fifty Nine And Paise
Ninety Five Only
Rupees Four Hundred
Nos. 1.00 463.29 Sixty Three And Paise
Twenty Nine Only
Rupees Four Hundred
Nos. 1.00 471.06 Seventy One And
Rupees Four Hundred
Nos. 1.00 479.95 Seventy Nine And
Paise Ninety Five Only
Rupees Five Hundred
Nos. 1.00 503.28 Three And Paise
Twenty Eight Only
110x20 Rupees Eight Hundred
Nos. 1.00 806.59 Six And Paise Fifty
Rupees Eight Hundred
Nos. 1.00 808.81 Eight And Paise Eighty
Rupees Eight Hundred
Nos. 1.00 813.25 Thirteen And Paise
Twenty Five Only
Rupees Eight Hundred
Nos. 1.00 815.47 Fifteen And Paise
Forty Seven Only
Rupees Eight Hundred
Nos. 1.00 817.70 Seventeen And Paise
Rupees Eight Hundred
Nos. 1.00 826.58 Twenty Six And Paise
Fifty Eight Only
Rupees Eight Hundred
Nos. 1.00 847.69 Forty Seven And Paise
Sixty Nine Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 55 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees Eight Hundred
Nos. 1.00 868.80 Sixty Eight And Paise
468 Supplying of REDUCER BRSHING as per
Rupees Six And Paise
Sixty Seven Only
32x20 Rupees Fifteen And
Paise Fifty Five Only
32x25 Nos. 1.00 10.00 Rupees Ten Only
40x20 Rupees Fifty Nine And
Nos. 1.00 59.99 Paise Ninety Nine
40x25 Rupees Twenty Six
Nos. 1.00 26.66 And Paise Sixty Six
40x32 Rupees Sixteen And
Nos. 1.00 16.67 Paise Sixty Seven
50x20 Rupees Thirty Five
Nos. 1.00 35.55 And Paise Fifty Five
Rupees Thirty Six And
Paise Sixty Six Only
50x32 Rupees Thirty Two
Nos. 1.00 32.22 And Paise Twenty Two
50x40 Rupees Sixteen And
Nos. 1.00 16.67 Paise Sixty Seven
Rupees One Hundred
Nos. 1.00 112.21 Twelve And Paise
Twenty One Only
Rupees One Hundred
Nos. 1.00 112.21 Twelve And Paise
Twenty One Only
63x32 Rupees Sixty Three
Nos. 1.00 63.33 And Paise Thirty Three
63x40 Rupees Fifty Eight And
Nos. 1.00 58.88 Paise Eighty Eight
Rupees Forty Six And
Paise Sixty Six Only
75x63 Rupees Eighty One
And Paise Ten Only
Rupees Two Hundred
Nos. 1.00 275.53 Seventy Five And
Paise Fifty Three Only
Rupees Two Hundred
Nos. 1.00 286.64 Eighty Six And Paise
Sixty Four Only
90x75 Rupees Three
Nos. 1.00 308.86 Hundred Eight And
Paise Eighty Six Only
110x63 Rupees Four Hundred
Nos. 1.00 484.40 Eighty Four And Paise
Rupees Five Hundred
Nos. 1.00 514.39 Fourteen And Paise
Thirty Nine Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 56 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
110x90 Rupees One
Hundred And Paise
Ninety Nine Only
469 Supplying of UPVC M.T.A. as per direction. Rupees Nil
(A) 20mm Dia Nos. 1.00 10.00 Rupees Ten Only
Rupees Fourteen And
Paise Forty Four Only
(C) 32mm Dia Rupees Twenty Two
Nos. 1.00 22.22 And Paise Twenty Two
(D) 40mm Dia Rupees Thirty Three
Nos. 1.00 33.33 And Paise Thirty Three
(E) 50mm Dia Rupees Sixty Four
Nos. 1.00 64.44 And Paise Forty Four
(F) 63mm Dia Rupees Eighty Two
Nos. 1.00 82.21 And Paise Twenty One
(G) 75mm Dia Rupees One Hundred
Thirty Seven And
Paise Seventy Six
Rupees One Hundred
Nos. 1.00 184.43 Eighty Four And Paise
Forty Three Only
(I) 110mm Dia Rupees Three
Nos. 1.00 321.08 Hundred Twenty One
And Paise Eight Only
470 Supplying of UPVC Brass M.T.A. as per
Rupees Two Hundred
Nos. 1.00 214.42 Fourteen And Paise
Nos. 1.00 316.64 Hundred Sixteen And
Paise Sixty Four Only
(C) 32mm Dia Rupees Three
Hundred Ninety Seven
And Paise Seventy
Rupees Five Hundred
Nos. 1.00 539.95 Thirty Nine And Paise
Ninety Five Only
(E) 50mm Dia Rupees Six Hundred
Nos. 1.00 664.38 Sixty Four And Paise
Thirty Eight Only
Rupees Nine Hundred
Nos. 1.00 996.57 Ninety Six And Paise
Fifty Seven Only
Hundred Forty And
Paise Eighty Nine Only
(H) 90mm Dia Rupees Two
Nos. 1.00 2290.88 Hundred Ninety And
Paise Eighty Eight
(I) 25x20mm Dia
Rupees Two Hundred
Nos. 1.00 204.42 Four And Paise Forty
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 57 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(J) 32x20mm Dia Rupees Two Hundred
Nos. 1.00 216.65 Sixteen And Paise
Sixty Five Only
(K) 32x25mm Dia
Nos. 1.00 355.52 Hundred Fifty Five And
Paise Fifty Two Only
471 Supplying of UPVC F.T.A. as per direction.
(A) 20mm Dia Rupees Twelve And
Nos. 1.00 12.22 Paise Twenty Two
Rupees Eighteen And
Paise Eighty Nine Only
(C) 32mm Dia Rupees Twenty Seven
Nos. 1.00 27.78 And Paise Seventy
Rupees Forty One And
Paise Eleven Only
Rupees Fifty One And
Paise Eleven Only
(F) 63mm Dia Rupees Seventy Six
Nos. 1.00 76.66 And Paise Sixty Six
Rupees One Hundred
Nos. 1.00 142.21 Forty Two And Paise
Twenty One Only
Rupees One Hundred
Nos. 1.00 194.43 Ninety Four And Paise
Forty Three Only
(I) 110mm Dia Rupees Three
Nos. 1.00 312.19 Hundred Twelve And
Paise Nineteen Only
472 Supplying of UPVC Brass F.T.A. as per direction.
Rupees One Hundred
Nos. 1.00 146.65 Forty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 182.20 Eighty Two And Paise
Nos. 1.00 316.64 Hundred Sixteen And
Paise Sixty Four Only
(D) 40mm Dia Rupees Four Hundred
Nos. 1.00 414.40 Fourteen And Paise
Rupees Five Hundred
Nos. 1.00 557.72 Fifty Seven And Paise
Seventy Two Only
(F) 63mm Dia Rupees Eight Hundred
Eighty Three And
Paise Twenty Five
Hundred Ninety Four
And Paise Thirty Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 58 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(H) 90mm Dia Rupees Two
Nos. 1.00 2249.78 Hundred Forty Nine
And Paise Seventy
(I) 25x20mm Dia
Rupees One Hundred
Nos. 1.00 146.65 Forty Six And Paise
Sixty Five Only
(J) 32x20mm Dia
Rupees One Hundred
Nos. 1.00 155.54 Fifty Five And Paise
Fifty Four Only
(K) 32x25mm Dia
Rupees One Hundred
Nos. 1.00 188.87 Eighty Eight And Paise
Eighty Seven Only
473 Supplying of CPVC PIPES as per direction.
(A) 15mm Dia Rupees Eighty Nine
Nos. 1.00 89.99 And Paise Ninety Nine
Rupees One Hundred
Nos. 1.00 147.76 Forty Seven And Paise
Seventy Six Only
Rupees Two Hundred
Nos. 1.00 214.42 Fourteen And Paise
(D) 32mm dia. Rupees Three
Hundred Twenty Nine
And Paise Ninety
Rupees Four Hundred
Nos. 1.00 453.29 Fifty Three And Paise
Twenty Nine Only
(F) 50mm dia. Rupees Seven
Hundred Fifty Nine
And Paise Ninety Two
474 Supplying of ELBOW SDR-11 90 Degree as per
(A) 15mm Dia Rupees Twenty Six
Nos. 1.00 26.66 And Paise Sixty Six
(B) 20mm dia. Rupees Thirty Eight
Nos. 1.00 38.89 And Paise Eighty Nine
Rupees Sixty Five And
Paise Fifty Five Only
Rupees One Hundred
Nos. 1.00 134.43 Thirty Four And Paise
Forty Three Only
(E) 40mm dia. Rupees Two Hundred
Nos. 1.00 205.54 Five And Paise Fifty
Rupees Four Hundred
Nos. 1.00 422.18 Twenty Two And Paise
475 Supplying of ELBOW SDR-11 45 Degree as per
(A) 15mm Dia Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
(B) 20mm dia. Rupees Thirty Seven
Nos. 1.00 37.77 And Paise Seventy
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 59 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(C) 25mm dia. Rupees Sixty Four
Nos. 1.00 64.44 And Paise Forty Four
Rupees One Hundred
Nos. 1.00 133.32 Thirty Three And Paise
Thirty Two Only
(E) 40mm dia. Rupees Two Hundred
Nos. 1.00 201.09 One And Paise Nine
Rupees Four Hundred
Nos. 1.00 417.74 Seventeen And Paise
Seventy Four Only
476 Supplying of COUPLER SDR-11 as per direction.
(A) 15mm Dia Rupees Seventeen
Nos. 1.00 17.78 And Paise Seventy
Rupees Twenty One
And Paise Eleven Only
(C) 25mm dia. Rupees Thirty Five
Nos. 1.00 35.55 And Paise Fifty Five
(D) 32mm dia. Rupees Seventy One
And Paise Ten Only
(E) 40mm dia. Rupees One Hundred
Twenty Seven And
Paise Seventy Seven
Rupees Two Hundred
Nos. 1.00 254.42 Fifty Four And Paise
477 Supplying of TEE SDR-11 as per direction.
(A) 15mm Dia Nos. 1.00 30.00 Rupees Thirty Only
(B) 20mm dia. Rupees Forty Two And
Nos. 1.00 42.22 Paise Twenty Two
Rupees Sixty Five And
Paise Fifty Five Only
Rupees One Hundred
Nos. 1.00 143.32 Forty Three And Paise
Thirty Two Only
Rupees Two Hundred
Nos. 1.00 258.86 Fifty Eight And Paise
Eighty Six Only
(F) 50mm dia. Rupees Five Hundred
Nos. 1.00 525.50 Twenty Five And Paise
478 Supplying of BRASS ELBLOW CPVC as per
(A) 15mm Dia Rupees Ninety Three
Nos. 1.00 93.32 And Paise Thirty Two
(B) 20mm dia. Rupees One Hundred
Twenty Nine And
Paise Ninety Nine
Rupees Five Hundred
Nos. 1.00 502.17 Two And Paise
(D) 32mm dia. Rupees Six Hundred
Nos. 1.00 649.94 Forty Nine And Paise
Ninety Four Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 60 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(E) 20x15mm dia. Rupees Ninety Six
Nos. 1.00 96.66 And Paise Sixty Six
(F) 25x15mm dia.
Rupees One Hundred
Nos. 1.00 182.20 Eighty Two And Paise
(G) 25x20mm dia.
Rupees Two Hundred
Nos. 1.00 267.75 Sixty Seven And Paise
Seventy Five Only
479 Supplying of BRASS TEE CPVC as per
Rupees One Hundred
Nos. 1.00 109.99 Nine And Paise Ninety
(B) 20mm dia. Rupees One Hundred
Seventy Seven And
Paise Seventy Six
(C) 25mm dia. Rupees Three
Hundred Fifty Eight
And Paise Eighty Five
(D) 32mm dia. Rupees Seven
Hundred Fifty Seven
And Paise Seventy
(E) 20x15mm dia. Rupees One Hundred
Nos. 1.00 121.10 Twenty One And Paise
(F) 25x15mm dia. Rupees Two Hundred
Nos. 1.00 206.65 Six And Paise Sixty
(G) 25x20mm dia.
Rupees Two Hundred
Nos. 1.00 273.31 Seventy Three And
Paise Thirty One Only
480 Supplying of F.T.A. SDR-11 as per direction.
(A) 15mm Dia Rupees Twenty Seven
Nos. 1.00 27.78 And Paise Seventy
(B) 20mm dia. Nos. 1.00 40.00 Rupees Forty Only
(C) 25mm dia. Rupees Fifty Eight And
Nos. 1.00 58.88 Paise Eighty Eight
Rupees One Hundred
Nos. 1.00 138.88 Thirty Eight And Paise
Eighty Eight Only
Rupees One Hundred
Nos. 1.00 193.31 Ninety Three And
Paise Thirty One Only
Rupees Two Hundred
Nos. 1.00 292.19 Ninety Two And Paise
(G) 20x15mm dia.
Rupees Forty Six And
Paise Sixty Six Only
481 Supplying of M.T.A. SDR-11 as per direction.
Rupees Twenty One
And Paise Eleven Only
Rupees Thirty One
And Paise Eleven Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 61 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees Forty Five And
Paise Fifty Five Only
(D) 32mm dia. Rupees Seventy Five
Nos. 1.00 75.55 And Paise Fifty Five
(E) 40mm dia. Rupees One Hundred
Nos. 1.00 111.10 Eleven And Paise Ten
(F) 50mm dia. Rupees Two Hundred
Nos. 1.00 205.54 Five And Paise Fifty
(G) 20x15mm dia. Rupees Thirty Eight
Nos. 1.00 38.89 And Paise Eighty Nine
(H) 25x20mm Dia Rupees Fifty Two And
Nos. 1.00 52.22 Paise Twenty Two
482 Supplying of UNION CPVC as per direction.
(A) 15mm Dia Rupees Sixty Nine
Nos. 1.00 69.99 And Paise Ninety Nine
(B) 20mm dia. Rupees One Hundred
Nos. 1.00 116.66 Sixteen And Paise
Rupees One Hundred
Nos. 1.00 146.65 Forty Six And Paise
Sixty Five Only
Rupees Two Hundred
Nos. 1.00 224.42 Twenty Four And
Paise Forty Two Only
(E) 40mm dia. Rupees Three
Hundred Seventy Two
And Paise Nineteen
(F) 50mm dia. Rupees Six Hundred
Nos. 1.00 644.38 Forty Four And Paise
Thirty Eight Only
483 Supplying of BALL VALVE SDR-11 as per
(A) 15mm Dia Rupees One Hundred
Twenty Four And
Paise Forty Three
Rupees Two Hundred
Nos. 1.00 218.87 Eighteen And Paise
Eighty Seven Only
Rupees Four Hundred
Nos. 1.00 408.85 Eight And Paise Eighty
(D) 32mm dia. Rupees Seven
Hundred Nineteen And
Paise Ninety Three
(E) 40mm dia. Rupees One
Nos. 1.00 1129.89 Hundred Twenty Nine
And Paise Eighty Nine
(F) 50mm dia. Rupees One
Nos. 1.00 1985.36 Hundred Eighty Five
And Paise Thirty Six
484 Supplying of STEP OVER BEND SDR-11 as per
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 62 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(A) 15mm Dia Rupees Seventy Nine
Nos. 1.00 79.99 And Paise Ninety Nine
(B) 20mm dia. Rupees One Hundred
Nos. 1.00 116.66 Sixteen And Paise
Rupees Two Hundred
Nos. 1.00 215.53 Fifteen And Paise Fifty
(D) 32mm dia. Rupees Three
Hundred Sixty Five
And Paise Fifty Two
(E) 40mm dia. Rupees Three
Hundred Seventy Six
And Paise Sixty Three
Rupees Eight Hundred
Nos. 1.00 821.03 Twenty One And Paise
485 Supplying of SWEEP BEND SDR-11 as per
(A) 15mm Dia Rupees Fifty Eight And
Nos. 1.00 58.88 Paise Eighty Eight
(B) 20mm dia. Rupees One Hundred
Nos. 1.00 101.10 One And Paise Ten
Rupees One Hundred
Nos. 1.00 164.43 Sixty Four And Paise
Forty Three Only
486 Supplying of TANK NIPPLE CPVC as per
(A) 15mm Dia Rupees Seventy Three
Nos. 1.00 73.33 And Paise Thirty Three
Rupees Eighty Six And
Paise Sixty Six Only
(C) 25mm dia. Rupees One Hundred
Twenty Nine And
Paise Ninety Nine
Rupees One Hundred
Nos. 1.00 193.31 Ninety Three And
Paise Thirty One Only
Rupees Two Hundred
Nos. 1.00 282.19 Eighty Two And Paise
(F) 50mm dia. Rupees Four Hundred
Twenty Seven And
Paise Seventy Four
487 Supplying of TANK NIPPLE SOCKET END SDR-
11 as per direction.
(A) 15mm Dia Rupees Fifty Nine And
Nos. 1.00 59.99 Paise Ninety Nine
(B) 20mm dia. Rupees Seventy Nine
Nos. 1.00 79.99 And Paise Ninety Nine
(C) 25mm dia. Rupees One Hundred
Nos. 1.00 105.55 Five And Paise Fifty
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 63 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees One Hundred
Nos. 1.00 169.98 Sixty Nine And Paise
Ninety Eight Only
(E) 40mm dia. Rupees Two Hundred
Nos. 1.00 241.09 Forty One And Paise
(F) 50mm dia. Rupees Three
Hundred Seventy Four
And Paise Forty One
488 Supplying of FLANGE WITH GASKET OPEN
CPVC as per direction.
(A) 25mm dia. Rupees Three
Hundred Thirty Nine
And Paise Ninety
Rupees Four Hundred
Nos. 1.00 416.63 Sixteen And Paise
Sixty Three Only
Rupees Five Hundred
Nos. 1.00 547.72 Forty Seven And Paise
Seventy Two Only
(D) 50mm dia. Rupees Seven
Hundred Ninety Two
And Paise Fourteen
489 Supplying of FLANGE WITH GASKET CLOSE
CPVC as per direction.
(A) 25mm dia. Rupees Three
Hundred Forty Eight
And Paise Eighty Five
Rupees Four Hundred
Nos. 1.00 426.62 Twenty Six And Paise
Rupees Five Hundred
Nos. 1.00 564.39 Sixty Four And Paise
Thirty Nine Only
(D) 50mm dia. Rupees Seven
Hundred Ninety Nine
And Paise Ninety Two
490 Supplying of PIPES CLIP SDR-11 as per
Rupees Six And Paise
Sixty Seven Only
(B) 20mm dia. Rupees Seven And
Nos. 1.00 7.78 Paise Seventy Eight
(C) 25mm dia. Rupees Seven And
Nos. 1.00 7.78 Paise Seventy Eight
Rupees Fourteen And
Paise Forty Four Only
(E) 40mm dia. Rupees Fifteen And
Paise Fifty Five Only
Rupees Twenty One
And Paise Eleven Only
491 Supplying of METAL CLAMP CPVC PIPE SDR-
11 as per direction.
Rupees Twenty One
And Paise Eleven Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 64 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(B) 20mm dia. Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
(C) 25mm dia. Rupees Twenty Six
Nos. 1.00 26.66 And Paise Sixty Six
(D) 32mm dia. Rupees Twenty Eight
Nos. 1.00 28.89 And Paise Eighty Nine
Rupees Thirty Six And
Paise Sixty Six Only
(F) 50mm dia. Rupees Thirty Seven
Nos. 1.00 37.77 And Paise Seventy
492 Supplying of 3 WAY ELBOW SDR-11 as per
(A) 20mm Dia Rupees Sixty Two And
Nos. 1.00 62.22 Paise Twenty Two
Rupees One Hundred
Nos. 1.00 103.32 Three And Paise Thirty
493 Supplying of TEE HOLDER SDR-11 as per
(A) 20mm Dia Rupees Twenty Three
Nos. 1.00 23.33 And Paise Thirty Three
(B) 25mm dia. Rupees Twenty Eight
Nos. 1.00 28.89 And Paise Eighty Nine
494 Supplying of PVC Pipes as per direction.
Rupees Two Hundred
Rmt. 1.00 273.31 Seventy Three And
Paise Thirty One Only
(B) 90mm Dia Rupees Three
Rmt. 1.00 351.08 Hundred Fifty One And
Paise Eight Only
(C) 110 mm Dia Rupees Four Hundred
Ninety Three And
Paise Twenty Eight
(D) 160mm Dia Rupees One
Thousand Twenty Two
And Paise Twelve
495 Supplying of PVC BEND (PLAIN) 87.5 Degree
as per direction.
Rupees One Hundred
Nos. 1.00 134.43 Thirty Four And Paise
Forty Three Only
Rupees One Hundred
Nos. 1.00 176.65 Seventy Six And Paise
Sixty Five Only
Rupees Two Hundred
Nos. 1.00 232.20 Thirty Two And Paise
(D) 160mm Dia Rupees Five Hundred
Nos. 1.00 561.06 Sixty One And Paise
496 Supplying of PVC BEND (DOOR) 87.5 Degree
as per direction.
Rupees One Hundred
Nos. 1.00 167.76 Sixty Seven And Paise
Seventy Six Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 65 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees Two Hundred
Nos. 1.00 215.53 Fifteen And Paise Fifty
Rupees Two Hundred
Nos. 1.00 284.42 Eighty Four And Paise
(D) 160mm Dia Rupees Six Hundred
Nos. 1.00 607.72 Seven And Paise
Seventy Two Only
497 Supplying of PVC BEND 45 Degree as per
Rupees One Hundred
Nos. 1.00 125.54 Twenty Five And Paise
Fifty Four Only
Rupees One Hundred
Nos. 1.00 159.98 Fifty Nine And Paise
Ninety Eight Only
Rupees One Hundred
Nos. 1.00 199.98 Ninety Nine And Paise
Ninety Eight Only
Rupees Four Hundred
Nos. 1.00 476.62 Seventy Six And Paise
498 Supplying of PVC CROSS TEE (PLAIN) as per
Rupees Two Hundred
Nos. 1.00 268.86 Sixty Eight And Paise
Eighty Six Only
(B) 90mm Dia Rupees Three
Hundred Sixty Seven
And Paise Seventy
Rupees Four Hundred
Nos. 1.00 451.07 Fifty One And Paise
(D) 160mm Dia Rupees One
Thousand Sixty Three
And Paise Twenty
499 Supplying of PVC CROSS TEE (DOOR) as per
(A) 75mm Dia Rupees Three
Hundred Seven And
Paise Seventy Five
(B) 90mm Dia Rupees Three
Hundred Ninety Nine
And Paise Ninety Six
Rupees Four Hundred
Nos. 1.00 496.62 Ninety Six And Paise
(D) 160mm Dia Rupees One
Hundred Six And
Paise Fifty Six Only
500 Supplying of PVC SINGLE "Y" (PLAIN) as per
Rupees Two Hundred
Nos. 1.00 247.75 Forty Seven And Paise
Seventy Five Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 66 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(B) 90mm Dia Rupees Three
Hundred Twenty Eight
And Paise Eighty Six
Rupees Four Hundred
Nos. 1.00 436.62 Thirty Six And Paise
(D) 160mm Dia Rupees One
Thousand Thirteen
And Paise Twenty
501 Supplying of PVC SINGLE "Y" (DOOR) as per
Rupees Two Hundred
Nos. 1.00 275.53 Seventy Five And
Paise Fifty Three Only
(B) 90mm Dia Rupees Three
Nos. 1.00 361.08 Hundred Sixty One
And Paise Eight Only
Rupees Four Hundred
Nos. 1.00 478.84 Seventy Eight And
Paise Eighty Four Only
(D) 160mm Dia Rupees One
Thousand Eighty Nine
And Paise Eighty Nine
502 Supplying of TEE (PLAIN) as per direction.
(A) 75mm Dia Rupees One Hundred
Eighty Seven And
Paise Seventy Six
Rupees Two Hundred
Nos. 1.00 271.08 Seventy One And
Paise Eight Only
(C) 110 mm Dia Rupees Three
Hundred Thirty Nine
And Paise Ninety
Rupees Eight Hundred
Nos. 1.00 817.70 Seventeen And Paise
503 Supplying of TEE (DOOR) as per direction.
Rupees Two Hundred
Nos. 1.00 225.53 Twenty Five And Paise
Fifty Three Only
(B) 90mm Dia Rupees Three
Nos. 1.00 321.08 Hundred Twenty One
And Paise Eight Only
(C) 110 mm Dia Rupees Four Hundred
Nos. 1.00 404.40 Four And Paise Forty
Rupees Eight Hundred
Nos. 1.00 896.58 Ninety Six And Paise
Fifty Eight Only
504 Supplying of SWEPT TEE (PLAIN) as per
Rupees One Hundred
Nos. 1.00 186.65 Eighty Six And Paise
Sixty Five Only
(B) 110 mm Dia Rupees Four Hundred
Nos. 1.00 402.18 Two And Paise
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 67 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(C) 160mm Dia Rupees One
Thousand Seventy
Five And Paise Forty
505 Supplying of SWEPT TEE (DOOR) as per
Rupees Two Hundred
Nos. 1.00 257.75 Fifty Seven And Paise
Seventy Five Only
Rupees Five Hundred
Nos. 1.00 533.28 Thirty Three And Paise
Twenty Eight Only
(C) 160mm Dia Rupees One
Thousand Eighty Four
And Paise Thirty Four
506 Supplying of COUPLER as per direction.
Rupees One Hundred
Nos. 1.00 104.43 Four And Paise Forty
Rupees One Hundred
Nos. 1.00 139.99 Thirty Nine And Paise
Ninety Nine Only
Rupees One Hundred
Nos. 1.00 188.87 Eighty Eight And Paise
Eighty Seven Only
Rupees Four Hundred
Nos. 1.00 475.51 Seventy Five And
Paise Fifty One Only
507 Supplying of REDUCAR as per direction.
(A) 90x45mm Dia
Rupees One Hundred
Nos. 1.00 123.32 Twenty Three And
Paise Thirty Two Only
(B) 110x75mm Dia
Rupees One Hundred
Nos. 1.00 167.76 Sixty Seven And Paise
Seventy Six Only
(C) 110x90 mm Dia Rupees One Hundred
Nos. 1.00 156.65 Fifty Six And Paise
Sixty Five Only
(D) 160x110mm Dia Rupees Three
Hundred Seventy Six
And Paise Sixty Three
508 Supplying of CLEANING PIPE as per direction.
(A) 75mm Dia Rupees One Hundred
Nos. 1.00 156.65 Fifty Six And Paise
Sixty Five Only
Rupees Two Hundred
Nos. 1.00 283.31 Eighty Three And
Paise Thirty One Only
Rupees Five Hundred
Nos. 1.00 592.16 Ninety Two And Paise
509 Supplying of REDUCING TEE (PLAIN) as per
(A) 90x75mm Dia Rupees Two Hundred
Nos. 1.00 261.09 Sixty One And Paise
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 68 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(B) 110x75mm Dia Rupees Three
Hundred Twenty Six
And Paise Sixty Three
(C) 160x110mm Dia
Rupees Six Hundred
Nos. 1.00 693.26 Ninety Three And
Paise Twenty Six Only
510 Supplying of REDUCING TEE (DOOR) as per
(A) 90x75mm Dia Rupees Three
Nos. 1.00 301.08 Hundred One And
Paise Eight Only
(B) 110x75mm Dia Rupees Three
Hundred Seventy Four
And Paise Forty One
(C) 160x110mm Dia Rupees Seven
Nos. 1.00 741.04 Hundred Forty One
And Paise Four Only
511 Supplying of DOUBLE "Y" (PLAIN) as per
(A) 75mm Dia Rupees Three
Hundred Twenty Six
And Paise Sixty Three
Rupees Four Hundred
Nos. 1.00 432.18 Thirty Two And Paise
Rupees Five Hundred
Nos. 1.00 547.72 Forty Seven And Paise
Seventy Two Only
(D) 160mm Dia Rupees One
Nos. 1.00 1330.98 Hundred Thirty And
Paise Ninety Eight
512 Supplying of DOUBLE "Y" (PLAIN) as per
Nos. 1.00 352.19 Hundred Fifty Two And
Paise Nineteen Only
(B) 90mm Dia Rupees Four Hundred
Nos. 1.00 464.40 Sixty Four And Paise
(C) 110 mm Dia Rupees Five Hundred
Ninety Three And
Paise Twenty Seven
(D) 160mm Dia Rupees One
Nos. 1.00 1374.31 Hundred Seventy Four
And Paise Thirty One
513 Supplying of DOUBLE SOCKET SELFIT
ELBOW as per direction.
(A) 40mm Dia Rupees Twenty Seven
Nos. 1.00 27.78 And Paise Seventy
Rupees Forty One And
Paise Eleven Only
(C) 63mm Dia Rupees Sixty Three
Nos. 1.00 63.33 And Paise Thirty Three
(D) 75mm Dia Rupees Ninety Three
Nos. 1.00 93.32 And Paise Thirty Two
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 69 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(E) 90mm Dia Rupees One Hundred
Nos. 1.00 121.10 Twenty One And Paise
Rupees One Hundred
Nos. 1.00 182.20 Eighty Two And Paise
514 Supplying of DOUBLE SOCKET SELFIT
ELBOW (DOOR) as per direction.
(A) 40mm Dia Rupees Thirty Eight
Nos. 1.00 38.89 And Paise Eighty Nine
Rupees Eighty Six And
Paise Sixty Six Only
(C) 75mm Dia Rupees One Hundred
Nos. 1.00 121.10 Twenty One And Paise
Rupees One Hundred
Nos. 1.00 164.43 Sixty Four And Paise
Forty Three Only
Rupees Two Hundred
Nos. 1.00 219.98 Nineteen And Paise
Ninety Eight Only
515 Supplying of DOUBLE SOCKET SELFIT TEE
(PLAIN) as per direction.
(A) 40mm Dia Rupees Thirty Seven
Nos. 1.00 37.77 And Paise Seventy
Rupees Fifty Four And
Paise Forty Four Only
(C) 63mm Dia Rupees Eighty Two
Nos. 1.00 82.21 And Paise Twenty One
Rupees One Hundred
Nos. 1.00 109.99 Nine And Paise Ninety
Rupees One Hundred
Nos. 1.00 167.76 Sixty Seven And Paise
Seventy Six Only
(F) 110mm Dia Rupees Two Hundred
Nos. 1.00 231.09 Thirty One And Paise
516 Supplying of DOUBLE SOCKET SELFIT TEE
(DOOR) as per direction.
(A) 63mm Dia Rupees One Hundred
Nos. 1.00 105.55 Five And Paise Fifty
Rupees One Hundred
Nos. 1.00 136.65 Thirty Six And Paise
Sixty Five Only
(C) 90mm Dia Rupees Two Hundred
Nos. 1.00 211.09 Eleven And Paise Nine
Rupees Two Hundred
Nos. 1.00 267.75 Sixty Seven And Paise
Seventy Five Only
517 Supplying of SWR SELFIT DRAINAGE SYSTEM
ELBOW (PLAIN) as per direction.
(A) 50mm Dia Nos. 1.00 40.00 Rupees Forty Only
(B) 63mm Dia Rupees Seventy Five
Nos. 1.00 75.55 And Paise Fifty Five
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 70 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees One Hundred
Nos. 1.00 102.21 Two And Paise Twenty
Rupees One Hundred
Nos. 1.00 159.98 Fifty Nine And Paise
Ninety Eight Only
Rupees One Hundred
Nos. 1.00 185.54 Eighty Five And Paise
Fifty Four Only
Rupees Four Hundred
Nos. 1.00 463.29 Sixty Three And Paise
Twenty Nine Only
518 Supplying of SWR SELFIT DRAINAGE SYSTEM
ELBOW (DOOR) as per direction.
(A) 50mm Dia Nos. 1.00 50.00 Rupees Fifty Only
(B) 63mm Dia Rupees One Hundred
Nos. 1.00 131.10 Thirty One And Paise
Rupees One Hundred
Nos. 1.00 135.54 Thirty Five And Paise
Fifty Four Only
(D) 90mm Dia Rupees Two Hundred
Nos. 1.00 205.54 Five And Paise Fifty
(E) 110mm Dia Rupees Two Hundred
Twenty Seven And
Paise Seventy Six
(F) 160mm Dia Rupees Five Hundred
Nos. 1.00 516.62 Sixteen And Paise
519 Supplying of SWR SELFIT DRAINAGE SYSTEM
BEND (45 DEGREE) as per direction.
(A) 40mm Dia Nos. 1.00 20.00 Rupees Twenty Only
Rupees Thirty One
And Paise Eleven Only
(C) 63mm Dia Rupees Fifty Seven
Nos. 1.00 57.77 And Paise Seventy
(D) 75mm Dia Rupees Seventy Two
Nos. 1.00 72.22 And Paise Twenty Two
Rupees One Hundred
Nos. 1.00 119.99 Nineteen And Paise
Ninety Nine Only
Rupees One Hundred
Nos. 1.00 138.88 Thirty Eight And Paise
Eighty Eight Only
Rupees Two Hundred
Nos. 1.00 271.08 Seventy One And
Paise Eight Only
Rupees Four Hundred
Nos. 1.00 416.63 Sixteen And Paise
Sixty Three Only
520 Supplying of SWR SELFIT DRAINAGE SYSTEM
BEND (45 DEGREE) DOUBLE SOCKET as per
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 71 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Rupees One Hundred
Nos. 1.00 113.32 Thirteen And Paise
Thirty Two Only
Rupees Two Hundred
Nos. 1.00 259.97 Fifty Nine And Paise
Ninety Seven Only
521 Supplying of SWR SELFIT DRAINAGE SYSTEM
COUPLER as per direction.
Rupees Fifty Four And
Paise Forty Four Only
(B) 75mm Dia Rupees Seventy Four
Nos. 1.00 74.44 And Paise Forty Four
Rupees One Hundred
Nos. 1.00 107.77 Seven And Paise
Seventy Seven Only
(D) 110mm Dia Rupees One Hundred
Nos. 1.00 116.66 Sixteen And Paise
Nos. 1.00 323.30 Hundred Twenty Three
And Paise Thirty Only
522 Supplying of SWR SELFIT DRAINAGE SYSTEM
TEE (PLAIN) as per direction.
(A) 50mm Dia Rupees Fifty Nine And
Nos. 1.00 59.99 Paise Ninety Nine
(B) 63mm Dia Rupees One Hundred
Nos. 1.00 106.66 Six And Paise Sixty
Rupees One Hundred
Nos. 1.00 126.65 Twenty Six And Paise
Sixty Five Only
Rupees Two Hundred
Nos. 1.00 219.98 Nineteen And Paise
Ninety Eight Only
(E) 110mm Dia Rupees Two Hundred
Twenty Nine And
Paise Ninety Eight
(F) 160mm Dia Rupees Six Hundred
Nos. 1.00 654.38 Fifty Four And Paise
Thirty Eight Only
523 Supplying of SWR SELFIT DRAINAGE SYSTEM
TEE (DOOR) as per direction.
(A) 50mm Dia Rupees Sixty Seven
Nos. 1.00 67.77 And Paise Seventy
Rupees One Hundred
Nos. 1.00 166.65 Sixty Six And Paise
Sixty Five Only
Rupees One Hundred
Nos. 1.00 155.54 Fifty Five And Paise
Fifty Four Only
Rupees Two Hundred
Nos. 1.00 257.75 Fifty Seven And Paise
Seventy Five Only
Nos. 1.00 304.41 Hundred Four And
Paise Forty One Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 72 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Nos. 1.00 705.49 Hundred Five And
Paise Forty Nine Only
524 Supplying of SWR SELFIT DRAINAGE SYSTEM
REDUCING TEE (PLAIN) as per direction.
(A) 90x75mm Dia
Rupees Two Hundred
Nos. 1.00 203.31 Three And Paise Thirty
(B) 110x75mm Dia Rupees Two Hundred
Twenty Nine And
Paise Ninety Eight
(C) 160x110mm Dia
Rupees Five Hundred
Nos. 1.00 574.39 Seventy Four And
Paise Thirty Nine Only
525 Supplying of SWR SELFIT DRAINAGE SYSTEM
REDUCING TEE (DOOR) as per direction.
(A) 90x75mm Dia
Rupees Two Hundred
Nos. 1.00 254.42 Fifty Four And Paise
(B) 110x75mm Dia Rupees Two Hundred
Seventy Nine And
Paise Ninety Seven
(C) 160x110mm Dia Rupees Seven
Hundred Fourteen And
Paise Thirty Seven
526 Supplying of SWR SELFIT DRAINAGE SYSTEM
SINGLE "Y" (PLAIN) as per direction.
(A) 50mm Dia Rupees Ninety Six
Nos. 1.00 96.66 And Paise Sixty Six
(B) 63mm Dia Rupees One Hundred
Nos. 1.00 121.10 Twenty One And Paise
(C) 75mm Dia Rupees One Hundred
Nos. 1.00 156.65 Fifty Six And Paise
Sixty Five Only
Rupees Two Hundred
Nos. 1.00 263.31 Sixty Three And Paise
Thirty One Only
Nos. 1.00 313.30 Hundred Thirteen And
Paise Thirty Only
Rupees Eight Hundred
Nos. 1.00 851.03 Fifty One And Paise
527 Supplying of SWR SELFIT DRAINAGE SYSTEM
SINGLE "Y" (DOOR) as per direction.
Rupees One Hundred
Nos. 1.00 109.99 Nine And Paise Ninety
Rupees One Hundred
Nos. 1.00 184.43 Eighty Four And Paise
Forty Three Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 73 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
(C) 75mm Dia Rupees Two Hundred
Nos. 1.00 201.09 One And Paise Nine
Nos. 1.00 304.41 Hundred Four And
Paise Forty One Only
Nos. 1.00 381.07 Hundred Eighty One
And Paise Seven Only
(F) 160mm Dia Rupees Nine Hundred
Nos. 1.00 916.58 Sixteen And Paise
Fifty Eight Only
528 Supplying of SWR SELFIT DRAINAGE SYSTEM
DOOR CAP as per direction. Rupees Nil
(A) 75mm Dia Rupees Thirty Two
Nos. 1.00 32.22 And Paise Twenty Two
(B) 110mm Dia Rupees Forty Four
Nos. 1.00 44.44 And Paise Forty Four
(C) 160mm Dia Rupees Forty Eight
Nos. 1.00 48.88 And Paise Eighty Eight
529 Supplying of SWR SELFIT DRAINAGE SYSTEM
VENT COWL as per direction.
(A) 50mm Dia Rupees Fifteen And
Paise Fifty Five Only
Rupees Eighteen And
Paise Eighty Nine Only
(C) 75mm Dia Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
Rupees Thirty Six And
Paise Sixty Six Only
(E) 110mm Dia Nos. 1.00 40.00 Rupees Forty Only
(F) 160mm Dia Rupees One Hundred
Nos. 1.00 105.55 Five And Paise Fifty
530 Supplying of SWR SELFIT DRAINAGE SYSTEM
REDUCING "Y" (PLAIN) as per direction.
(A) 110x75mm Dia
Rupees Two Hundred
Nos. 1.00 285.53 Eighty Five And Paise
Fifty Three Only
(B) 160x110mm Dia Rupees Six Hundred
Nos. 1.00 604.38 Four And Paise Thirty
531 Supplying of SWR SELFIT DRAINAGE SYSTEM
REDUCING "Y" (DOOR) as per direction.
(A) 75mm Dia Rupees One Hundred
Nos. 1.00 131.10 Thirty One And Paise
Rupees Two Hundred
Nos. 1.00 245.53 Forty Five And Paise
Fifty Three Only
Rupees Five Hundred
Nos. 1.00 575.50 Seventy Five And
Paise Fifty Only
532 Supplying of SS Round (Katori) for Bib tap, Bib Rupees Twenty Five
Cock etc as directed. Nos. 1.00 25.55 And Paise Fifty Five
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 74 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
533 Supplying of Chair Brecket for Wall Hung fitting
etc as directed.
Hundred Fourteen And
Paise Thirty Two Only
534 Supplying of SS Rack Bolts etc as directed.
Rupees Nine Hundred
Pair 1.00 919.91 Nineteen And Paise
Ninety One Only
535 Supplying of Waste Couplung (Brass) etc as
Rupees Four Hundred
Nos. 1.00 498.84 Ninety Eight And Paise
Eighty Four Only
536 Supplying of SS / Brass CP Nipple as directed. Rupees Seventy Six
Inch 1.00 76.66 And Paise Sixty Six
537 Supplying of SS Shower Arm Pipes as directed.
(a) (9 Inch Size) Rupees Two Hundred
Twenty Nine And
Paise Ninety Eight
(b) (12 Inch Size) Rupees Three
Hundred Forty Five
And Paise Fifty Two
(C) (15 Inch Size)
Rupees Four Hundred
Inch 1.00 441.07 Forty One And Paise
(D) (18 Inch Size) Rupees Five Hundred
Inch 1.00 531.06 Thirty One And Paise
538 Supplying of Sefron Tap Roll as directed Rupees Twenty Five
Nos. 1.00 25.55 And Paise Fifty Five
539 Providing and fixing PVC Cover with Frame of Rupees One
size 450x600 with cement vata. Including post of Thousand Two
labour and materials. Hundred Forty And
Paise Thirty Six Only
540 Providing and fixing PVC Cover with Frame of
size 600x600 with cement vata. Including post of
labour and materials. Nos. 1.00 1434.30
Hundred Thirty Four
And Paise Thirty Only
541 Providing and fixing 20x20 cm (Squre/round)
Rupees Six Thousand
shawer with 30 to 45 cm 25mm dia SS pipe with
One Hundred Seventy
neccessery fixturs and fastners & labour charge Nos. 1.00 6171.61
One And Paise Sixty
as per design by (Instruction by) engineer in
542 Providing and fixing Stainless steel (S.S.) nipple Rupees Two Hundred
Disk etc complete as directed by Engineer in Nos. 1.00 201.09 One And Paise Nine
543 Providing and fixing 30cm long & 40 cm Dia
Rupees Six Thousand
round two in one (Hot & Cold Couetion Pillar cock
One Hundred Twenty
with labour charges etc complete as directed by Nos. 1.00 6121.61
One And Paise Sixty
Engineer in charge.
544 Providing and fixing Diverter with spout crome Rupees Seven
finish make Jaquar / ESCO or equivalent brand Thousand Two
with necessary inner part fixutes and fastening Nos. 1.00 7254.83 Hundred Fifty Four
etc complete as directed by Engineer in charge. And Paise Eighty
545 Providing and fixing toilet paper roll stand with Rupees One
necessery fixtures and fastners and labour Thousand Six Hundred
charge s directed by Engineer in charge. Sixty Six And Paise
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 75 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
546 Providing and fixing flush cock for Urinal with Rupees Two
necessary fixtures and fastening with all labour Thousand Four
charges etc complete as directed by Engineer in Nos. 1.00 2444.20 Hundred Forty Four
charge. And Paise Twenty
547 Providing and fixing Urinal fitting for Brand
Rupees Ten Thousand
Jaquar/ CERA/ Hindware / Plumber (Brand) or
Nine Hundred Sixty
equivalent Brand White etc complete as directed. Nos. 1.00 10965.57
Five And Paise Fifty
548 Credit for Bib Tap Rupees And Paise
549 Credit for Pillar Tap Rupees And Paise
550 Credit for Stop Tap Rupees And Paise
551 Credit for Flush Cock Rupees And Paise
552 Credit for Hand Frucet Rupees And Paise
Forty Five Only
553 Credit for Shop Disk Rupees And Paise
Twenty Five Only
554 Credit for Bottle Trap Rupees And Paise
555 Credit for Nanhi Trap Rupees And Paise
556 Credit for Shower Rupees And Paise
Section (A) Chair
564 HIGH BACK CHAIR
Providing and supplying revolving & Tilting High
back chair with M.S frame work. Finished with
leather/Synthetic Leather/Fabric as per selected
Rupees Twenty Eight
make and model provided by company.The chair
should have 3 years warranty. As per choice of Nos. 1.00 28886.00
Hundred Eighty Six
users department and Concern officers in charge
as directed by the Architect/Engineer. The
quoting Price Including Cost of packing,
forwarding, loading, unloading, installaion.
565 MEDIUM BACK CHAIR
Providing and supplying revolving & Tilting
Medium back chair with M.S frame work.
Finished with leather/Synthetic Leather/Fabric as
Rupees Thirteen
per selected make and model provided by
company.The chair should have 3 years Nos. 1.00 13332.00
Hundred Thirty Two
warranty. As per choice of users department and
Concern officers in charge as directed by the
Architect/Engineer. The quoting Price Including
Cost of packing, forwarding, loading, unloading,
566 VISITOR OR GUEST CHAIR
Providing and supplying Visitor chair for staff
visitors with M.S frame work. Finished with
leather/Synthetic Leather/Fabric as per selected
make and model provided by company .The chair
should have 3 years warranty.As per choice of Nos. 1.00 4444.00
Hundred Forty Four
users department and Concern officers in charge
as directed by the Architect/Engineer. The
quoting Price Including Cost of packing,
forwarding, loading, unloading, installaion.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 76 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
567 EXECUTIVE VISITOR OR GUEST CHAIR
Providing and supplying Visitor chair for staff
visitors with M.S frame work. Finished with
leather/Synthetic Leather/Fabric as per selected
make and model provided by company.The chair Rupees Six Thousand
should have 3 years warranty.As per choice of Nos. 1.00 6666.00 Six Hundred Sixty Six
users department and Concern officers in charge Only
as directed by the Architect/Engineer. The
quoting Price Including Cost of packing,
forwarding, loading, unloading, installaion.
568 PLASTIC CHAIR
Providing & Supplying Super delux chairs having
size :- 540 mm (W) x 867 mm (H) x 605 mm (D)
with minimum 4 Kg. weight & along with hand rest
arms made from high quality material. The
quoting price should be inclusive of all types of
taxes & duties ,packing, forwarding, loading, Rupees One
unloading, installaion. Supplied strictly as per our Nos. 1.00 1111.00 Thousand One
technical specifications and make. Approved Hundred Eleven Only
Make :- Nilkamal / Cello . As per choice of users
department and Concern officers in charge as
directed by the Architect/Engineer.
Approved Make to be used as below.
1. Nilkamal 2. Cello 3. Varmora
569 CONFERENCE ROOM WOODEN CHAIR
Providing & Supplying Teak wood Wooden
Chairs With Arm rest. The entire structure of the
chair must be made out of Special Seasoned
Indian Teakwood. Having Size of 470 (W) X
(D) X 900 (H) mm. With structure of seat and
back rest with smooth & curved edges with,
seat/back, cushioning of 40 density PU foam in Rupees Nine
seat & back with requisite no. of coats of Thousand One
melamine sprey polishing, plastic buffers & Nos. 1.00 9162.72 Hundred Sixty Two
genuine leather, The quoting price should be And Paise Seventy
inclusive of all types of taxes & duties ,packing, Two Only
forwarding, loading, unloading, installation.
Supplied strictly as per our technical
specifications and make. As per choice of users
department and Concern officers in charge as
directed by the engineer incharge.
570 SS DINING CHAIR
Providing & Supplying SS Dining Chair, As Per
Standard Size, The entire structure should be
made with (S.S 304 Grade Tube i.e 25 MM Ø &
1.2 MM Wall Thickness. With S.S brush finish
buffing process, totally rust and moisture proof,
Nos. 1.00 5055.05 Thousand Fifty Five
with cushion seat & back. The quoting price
And Paise Five Only
should be inclusive of all types of taxes & duties
,packing, forwarding, loading, unloading,
installation. And as per the drawing/ image & the
chioce of user and as directed by engineer in
571 Repairing Old wooden chair with melamine
polishing work & Replacing existing Cusion (with
Cover) By new one. polishing work Done By
Removing old polish and cleaning all dust, dirt, Rupees Four
and debries by sandpaper & applying fresh polish Thousand Six Hundred
to evenly match every wood surface. include Twenty Five And Paise
costs for all materials, labour charges, cusion Eighty Only
with good quality cloth tapestry cover etc
complete as directed by engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 77 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
572 Repairing Old wooden chair with melamine
polishing work By Removing old polish and
cleaning all dust, dirt, and debries by sandpaper
Thousand Thirteen
& applying fresh polish to evenly match every Nos. 1.00 8013.34
And Paise Thirty Four
wood surface. include costs for all materials,
labour charges etc complete as directed by
engineer in charge.
Section (B) Table
573 STAFF TABLE WITH LAMINATE FINISH
(SIZE :- 1350 MM X 750 MM X 675 MM HIGH =
Providing and supplying Table made with 19mm
Thk. Plywood structure as per architect drawing
finished with 1.0 mm Thk. decorative laminate on
outside portion &0.8 mm Thk. liner Laminate
inside as specified & approved by architect with
fixed with necessary fixtures and fastening
(Hardware) as per architect drawing. The
top/side shall be of 36 mm thickness plywood +
1 mm thickness Laminate . Provide Plastic
Computer Desk Table Grommet Cable Wire
Thousand Thirteen
Outlet Hole Cover 60mm, Key-board trey, S.S Smt 1.00 8013.34
And Paise Thirty Four
legs, Drawers with telescopic roller channels,
Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle,
hinges, magnet , complete with bidding patties
and all required hardware .Provide footrest as per
drawing. All exposed edges shall be covered with
required Teak wood beading Patti finished with
approved melamine polishing work. Complete as
per architect's drawing and as per instruction of
architect & engineer in charge.
574 STAFF TABLE WITH VINEER FINISH
(SIZE :- 1350 MM X 750 MM X 675 MM HIGH =
Providing and supplying Table made with 19mm
Thk. Plywood structure as per architect drawing
finished with 4.0 mm Thk. Vineer on outside
portion & 0.8 mm Thk. liner Laminate inside as
specified & approved by architect with fixed with
necessary fixtures and fastening (Hardware) as
per architect drawing. The top/side shall be of
mm thickness plywood + 4 mm thickness Vineer
. Provide Plastic Computer Desk Table Grommet Rupees Nine
Cable Wire Outlet Hole Cover 60mm, Key-board Thousand Nine
trey, S.S legs, Drawers with telescopic roller Smt 1.00 9927.29 Hundred Twenty
channels, Handle and locking arrangements with Seven And Paise
all necessary fixtures and fastening .Provide Twenty Nine Only
Shutters as per drawing fixed with handle,
hinges, magnet , complete with bidding patties
and all required hardware .Provide footrest as per
drawing. All exposed edges shall be covered with
required Teak wood beading Patti finished with
approved melamine polishing work. Complete as
per architect's drawing and as per instruction of
architect & engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 78 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
575 STAFF TABLE WITH COURIAN TOP (SIZE :-
1350 MM X 750 MM X 675 MM HIGH =
Providing and supplying Table made with 19mm
Thk. Plywood structure as per architect drawing
finished with Courian Top & 0.8 mm Thk. liner
Laminate inside as specified & approved by
architect with fixed with necessary fixtures and
fastening (Hardware) as per architect drawing.
The top/side shall be of 36 mm thickness
plywood + COURIAN TOP . Provide Plastic
Computer Desk Table Grommet Cable Wire
Outlet Hole Cover 60mm, Key-board trey, S.S
Smt 1.00 16973.05 Hundred Seventy
legs, Drawers with telescopic roller channels,
Three And Paise Five
Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle,
hinges, magnet , complete with bidding patties
and all required hardware .Provide footrest as per
drawing. All exposed edges shall be covered with
required Teak wood beading Patti finished with
approved melamine polishing work. Complete as
per architect's drawing and as per instruction of
architect & engineer in charge.
576 SIDE UNIT WITH LAMINATE FINISH (900 X
Providing & Supplying Side unit made with
mm thick plywood. The basic structure of the side
unit shall be made out of 19 mm thickness
plywood sheet. and covered with 1.00 mm
thickness laminate on out side and 0.8mm thick
balancing laminate inside. It will have series of Rupees Six Thousand
drawers and cup board as shown in architecture Nos. 1.00 6020.61 Twenty And Paise
drawing. (3 cup boards and 3 drawers) Provide Sixty One Only
S.S legs, Drawers with telescopic roller channels
, Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle
hinges, magnet, complete with bidding patties
and all required hardware.
577 SIDE UNIT WITH VINEER FINISH (900 X 450 X
Providing & Supplying Side unit made with
mm thick plywood. The basic structure of the side
unit shall be made out of 19 mm thickness
plywood sheet. and covered with 4.00 mm
thickness Vineer on out side and 0.8mm thick
balancing laminate inside. It will have series of
Thousand Six Hundred
drawers and cup board as shown in architecture Nos. 1.00 11699.84
Ninety Nine And Paise
drawing. (3 cup boards and 3 drawers) Provide
Eighty Four Only
S.S legs, Drawers with telescopic roller channels
, Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle
hinges, magnet, complete with bidding patties
and all required hardware.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 79 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
578 SIDE UNIT WITH COURIAN TOP (900 X 450 X
Providing & Supplying Side unit made with
mm thick plywood. The basic structure of the side
unit shall be made out of 19 mm thickness
plywood sheet. and covered with courian on out
side and 0.8mm thick balancing laminate inside. Rupees Twenty
It will have series of drawers and cup board as Thousand Five
shown in architecture drawing. (3 cup boards Nos. 1.00 20526.23 Hundred Twenty Six
and 3 drawers) Provide S.S legs, Drawers with And Paise Twenty
telescopic roller channels , Handle and locking Three Only
arrangements with all necessary fixtures and
fastening .Provide Shutters as per drawing fixed
with handle , hinges, magnet, complete with
bidding patties and all required hardware.
579 REAR UNIT WITH LAMINATE FINISH (1350 X
Providing & Supplying Rear unit made with
mm thick plywood. The basic structure of the rear
unit shall be made out of 19 mm thickness
plywood sheet. and covered with 1.00 mm
thickness laminate on out side and 0.8mm thick
Rupees Ten Thousand
balancing laminate inside. It will have series of
Seven Hundred Ninety
drawers and cup board as shown in architecture Nos.. 1.00 10797.91
Seven And Paise
drawing. (3 cup boards and 3 drawers) Provide
Ninety One Only
S.S legs, Drawers with telescopic roller channels
, Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle
hinges, magnet, complete with bidding patties
and all required hardware.
580 REAR UNIT WITH VINEER FINISH (1350 X
Providing & Supplying Rear unit made with
mm thick plywood. The basic structure of the rear
unit shall be made out of 19 mm thickness
plywood sheet. and covered with 1.00 mm
thickness laminate on out side and 0.8mm thick
Rupees Thirteen
balancing laminate inside. It will have series of
Thousand Six Hundred
drawers and cup board as shown in architecture Nos.. 1.00 13602.68
Two And Paise Sixty
drawing. (3 cup boards and 3 drawers) Provide
S.S legs, Drawers with telescopic roller channels
, Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle
hinges, magnet, complete with bidding patties
and all required hardware.
581 REAR UNIT WITH COURIAN TOP (1350 X
Providing & Supplying Rear unit made with
mm thick plywood. The basic structure of the rear
unit shall be made out of 19 mm thickness
plywood sheet. and covered with 1.00 mm
thickness laminate on out side and 0.8mm thick
Rupees Twenty Four
balancing laminate inside. It will have series of
Thousand Six Hundred
drawers and cup board as shown in architecture Nos.. 1.00 24624.81
Twenty Four And
drawing. (3 cup boards and 3 drawers) Provide
Paise Eighty One Only
S.S legs, Drawers with telescopic roller channels
, Handle and locking arrangements with all
necessary fixtures and fastening .Provide
Shutters as per drawing fixed with handle
hinges, magnet, complete with bidding patties
and all required hardware.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 80 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
582 EXECUTIVE TABLE WITH SIDE UNIT (TABLE
SIZE = 2600 MM X 850 MM X 782 MM HEIGHT)
Providing and supplying Table made with 19mm
Thk. Plywood structure as per architect drawing
finished with 4.0 mm Thk. Vineer finish on
outside portion & 0.8 mm Thk. liner Laminate
inside as specified & approved by architect fixed
with necessary fixtures and fastening (Hardware)
as per architect drawing. The top/side shall be of
36 mm thickness plywood + 4 mm thickness
teak veneer.All the visible area shall be finished
with mono coat polishing. Provide Plastic
Computer Desk Table Grommet Cable Wire Rupees Eleven
Outlet Hole Cover 60mm, Key-board trey, S.S Thousand Four
legs, Drawers with telescopic roller channels, Smt 1.00 11499.86 Hundred Ninety Nine
Handle and locking arrangements with all And Paise Eighty Six
necessary fixtures and fastening.Provide Only
Shutters as per drawing fixed with handle,
hinges, magnet, complete with bidding patties
and all required hardware.Provide footrest as per
drawing. All exposed edges shall be covered with
required Teak wood beading Patti finished with
approved melamine polishing work. Complete as
per architect's drawing and as per instruction of
architect & engineer in charge. (Refer drawing)
Quoting price also includes the cost of side unit
as shown in drawing with all materials, fixtures &
SIDE UNIT (1200 MM X 450 MM X 782 MM
583 EXECUTIVE TABLE WITH SIDE UNIT (TABLE
SIZE = 2600 MM X 850 MM X 782 MM HEIGHT)
Providing and supplying Table made with 19mm
Thk. Plywood (M1) structure as per architect
drawing finished with 1.0 mm Thk. Laminate
finish on outside portion & 0.8 mm Thk. liner
Laminate inside as specified & approved by
architect fixed with necessary fixtures and
fastening (Hardware) as per architect drawing.
The top/side shall be of 36 mm thickness
plywood + 4 mm thickness teak veneer. All the
visible area shall be finished with mono coat
polishing. Provide Plastic Computer Desk Table
Grommet Cable Wire Outlet Hole Cover 60mm,
Key-board trey, S.S legs, Drawers with telescopic Smt 1.00 11430.17
Hundred Thirty And
roller channels, Handle and locking
Paise Seventeen Only
arrangements with all necessary fixtures and
fastening. Provide Shutters as per drawing fixed
with handle, hinges, magnet, complete with
bidding patties and all required hardware. Provide
footrest as per drawing. All exposed edges shall
be covered with required Teak wood beading
Patti finished with approved melamine polishing
work. Complete as per architect's drawing and as
per instruction of architect & engineer in charge.
(Refer drawing) Quoting price also includes the
cost of side unit as shown in drawing with all
materials, fixtures & labour.
SIDE UNIT (1200 MM X 450 MM X 782 MM
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 81 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
584 EXECUTIVE TABLE WITH SIDE UNIT (TABLE
SIZE = 2600 MM X 850 MM X 782 MM HEIGHT)
Providing and supplying Table made with 19mm
Thk. Plywood structure as per architect drawing
finished with Courian Top on outside portion &
0.8 mm Thk. liner Laminate inside as specified &
approved by architect fixed with necessary
fixtures and fastening (Hardware) as per architect
drawing. The top/side shall be of 36 mm
thickness plywood + 4 mm thickness teak
veneer. All the visible area shall be finished with
mono coat polishing. Provide Plastic Computer
Desk Table Grommet Cable Wire Outlet Hole
Rupees Twenty Three
Cover 60mm, Key-board trey, S.S legs, Drawers
Thousand Fifty Three
with telescopic roller channels, Handle and Smt 1.00 23053.25
And Paise Twenty Five
locking arrangements with all necessary fixtures
and fastening. Provide Shutters as per drawing
fixed with handle, hinges, magnet, complete with
bidding patties and all required hardware.Provide
footrest as per drawing. All exposed edges shall
be covered with required Teak wood beading
Patti finished with approved melamine polishing
work. Complete as per architect's drawing and as
per instruction of architect & engineer in charge.
(Refer drawing) Quoting price also includes the
cost of side unit as shown in drawing with all
materials, fixtures & labour.
SIDE UNIT (1200 MM X 450 MM X 782 MM
585 CORNER TABLE ( SIZE :- 1000 MM X 600 MM X
400 MM HIGH = 0.60 SQ.MT)
Providing and supplying Corner Table with Glass
top made with 19mm Thk. Plywood finished with
1.0 mm Thk. decorative laminate sheet specified Rupees Eleven
and approved by architect & fixed with necessary Thousand Seven
fixtures and fastening (Hardware) inclusive of Smt 1.00 11784.68 Hundred Eighty Four
approved melamine polishing work. Top part of And Paise Sixty Eight
center Table covered with 8 mm Thk. toughened Only
Glass with Polished Edges.Complete as per
architect's drawing and as per instruction of
architect & engineer in charge.
586 CENTRE TABLE ( SIZE :- 1000 MM X 600 MM X
400 MM HIGH = 0.60 SQ.MT)
Providing and supplying Centre Table/Tipoi with
Glass top made with 19mm Thk. Plywood
finished with 1.0 mm Thk. decorative laminate
sheet specified and approved by architect & fixed Rupees Twelve
with necessary fixtures and fastening (Hardware) Thousand Four
inclusive of approved melamine Hundred Sixty Three
polishing(M29)work. Top part of center Table And Paise Forty Only
covered with 8 mm Thk. toughened Glass with
Polished Edges. Complete as per architect's
drawing and as per instruction of architect &
engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 82 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
587 COMPUTER TABLE (SIZE :- 1200 MM X
MM X 1066 MM HIGH = 0.72 SQ.MT)
Providing and Supplying computer table having
size: 1220 MM * 600 MM* 1066 MM. The entire
frame structure should be made with 19 mm
Plywood. Top of the table and all exposed area
finished with 1 MM thickness laminate and
thickness balancing laminate, leaping with 25 x
12 MM thickness teakwood beading. Also provide
CPU Trolly, Foot Rest, key board tray fitted with
necessary fittings such as wire / cable manager,
auto closing hinges, stainless steel handle,
multipurpose lock, sliders, and other necessary Rupees Eight
hardware, with fully closed back panel. All Thousand Three
wooden beading finish with malamine spray Hundred Twenty Two
polishing, it should give the feeling of warmth and And Paise Forty Only
blends with the office ambience, Should be
compact with ample storage & it must also be
aesthetically appealing in looks. And the must , it
Should be Stylish, Sturdy and durable. The
quoting price should be inclusive of all types of
taxes & duties ,packing, forwarding, loading,
unloading, installaion. As per detail drawing &
choice of users department and Concern officers
in charge as directed by the Architect / Engineer.
588 Conference Table For 20 Persons
Providinng & Fixing Conference Table With
Person Seating Capacity in U shape As per
Drawing Abd directed By engineer In Charge :
Table Size of 2 side :7250 x 750 x 750 mm
Height ,Table Size of 1 side :2500 x 750 x 750 Rupees Three
mm Height, Top : 37 mm Thick Top Made Of 18 Thousand Seven
mm Ply With 1 mm Thick laminate Finish Teak Smt 1.00 3773.36 Hundred Seventy
Wood Batten Patti On Edges Top Shall Be Three And Paise Thirty
Equiped With Cable Manager As per Detail Six Only
Drawing Provided All Accesories Shall Be of
Approved Make Etc. Complete With Fixtures And
Fastening Of Standard Quality As Approved And
Directed By Engineer In Charge.
589 DINING TABLE (size 1830 x 1000 x 760 (H) mm)
Providing & supplying of Dining table with top
size 1830 x 1000 x 760 (H) mm the entire
structure made out by S.S 304 grade round pipe,
50 mm Ø with 2 mm wall thickness and table top
made from 19mm thickness BWP IS 710 ply with
1mm thick laminate on both the side. Top to be
rest on 50 mm Ø all visible part of S.S, with brush Rupees Twenty One
finish buffing process, totally rust and moisture Thousand Five
proof. Applying wooden bidding on all exposed Smt 1.00 21581.68 Hundred Eighty One
area and shall be finished with monocoat And Paise Sixty Eight
polishing. The quoting price should be inclusive Only
of all types of taxes & duties ,packing, forwarding,
loading, unloading, installation. And as per the
drawing/ image & the chioce of user and as
directed by engineer in charge.
590 OFFICER TABLE TOP GLASS
Providing & Supplying 8 mm thick Glass of
approved brand for officers table top as directed
by Concern officers in charge as directed by the
Architect/Engineer. the all four Edges of glass Smt 1.00 2110.90
Hundred Ten And
should be moulded / chamfered as per choice of
Paise Ninety Only
user department.
Approved Make to be used as given in Schedule
of Approved Makes
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 83 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
591 MODULAR WORK STATION
Providing and installation of linear workstation
having size 1200 (L) x 600 (D) x 750 / 1200 MM
(H) of comprising of MS powder coated partition
panels of thickness 60 mm(double skinned
system), with powder coated MS frames inside of
16 guage. Infills are of partical board with
cladding of 9mm thk particle board tiles on both
sides. Fascia/surface of the panel can be given in
fabric/soft board/ white board/half glass. All
exposed profiles,connectors are in powder
coated aluminium.The horizontal bottom of each
panel will be given with an inbuilt wire
Rupees Seventeen
management system of 100mm ht covered by
MS powder coated raceway panel. A pair of Level Smt 1.00 17220.50
Hundred Twenty And
adjusters are provided with each panel. All
Paise Fifty Only
worktops are in 25mm thk prelaminated MDF with
edge lipping & vertical legs are in 18mm thk
prelaminated MDF with lipped edges. Along with
metal cpu trolly and metallic key board tray (ebco
make). Each work station should be provided with
modular Electrical fittings with 3 switch and
sockets, and One LAN point at the down part of
work station (No extra/additional cost will be paid
for conduit, wireing CAT-6 etc. Contractor should
provide all necessary installation, commissioning
etc. The quoting price should be inclusive of all
types of taxes & duties ,packing, forwarding,
loading, unloading, installaion. As per detail
Section (C) SOFA Rupees Nil
592 THREE SEATER SOFA
Providing & Supplying Approve Make and Model
Rupees Twenty Three
3 Seater Sofa As per choice of users department
and Concern officers in charge as directed by the Nos. 1.00 23331.00
Hundred Thirty One
Architect/Engineer. The quoting Price Including
Cost of packing, forwarding, loading, unloading,
593 TWO SEATER SOFA
Providing & Supplying Approve Make and Model
3 Seater Sofa As per choice of users department Rupees Sixteen
and Concern officers in charge as directed by the Nos. 1.00 16665.00 Thousand Six Hundred
Architect/Engineer. The quoting Price Including Sixty Five Only
Cost of packing, forwarding, loading, unloading,
594 Providing and doing 3 seated Sofa repairing with
50mm thick & 25mm thick High density "U" foam Rupees Ten Thousand
leather capastry cover with necessary fixtures, One Hundred Sixty
fastening and adhesive materials with all labour One And Paise Sixty
charges as per design by Engineer in charge. One Only
595 Providing and doing 2 seated Sofa repairing with
50mm thick & 25mm thick High density "U" foam
leather capastry cover with necessary fixtures,
Nos. 1.00 7507.33 Hundred Seven And
fastening and adhesive materials with all labour
Paise Thirty Three
charges as per design by Engineer in charge.
596 VISITORS GROUP SEATING
Providing & Supplying Approve Make and Model Rupees Nine
Visitors Group Seating As per choice of users Thousand Five
department and Concern officers in charge as Nos. 1.00 9593.99 Hundred Ninety Three
directed by the Architect/Engineer. The quoting And Paise Ninety Nine
Price Including Cost of packing, forwarding, Only
loading, unloading, installaion.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 84 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
597 EXECUTIVE SOFA
Providing & Supplying Premium Quality
Executive Sofa, the entire structure should be
made in a range of high-quality Indian Teakwood
that enables wood best-suited to the particular
place. It shall have copper spring base with
elastic belts with foam/jute covering on seat &
back. The seat/back shall have 32 density soft
PU foam of 125 MM thickness with leather
tapestry where ever required. Design must add a
Nos. 1.00 16665.00 Thousand Six Hundred
touch of uniqueness i.e made in tuxedo styling
Sixty Five Only
that features a unique double track arm design to
give comfort with quality etc. Supplied strictly as
per our technical specifications. As per choice of
users department and concern officers in charge
and as directed by the engineer in charge. The
quoting price should be inclusive of packing,
forwarding, loading, unloading etc.
598 OFFICE SOFA
Providing & Supplying Office Sofa, the entire
structure made with plywood IS 710 18/12/8 MM
where ever required as per the detailed drawing.
The sofa can be made in combination of the Kiln-
dried maple wood , bark. The show wood of the
legs, arms, and back can be made according to
different choices. Which shall be covered with
density PU foam with required thickness as per
design in seat and back, armrest and in addition Rupees Ten Thousand
covered with 14 MM thick PU foam it can also be Four Hundred Fifty
made from polyurethane foam, polyester fiber, Three And Paise Fifty
cotton, latex, or cotton-wrapped springs or any Only
approved synthetic, natural, or blended fabric as
per the drawing. Exterior fabric must be finished
with a protective anti-stain coating. As per choice
of users department and concern officers in
charge and as directed by the engineer in
charge. The quoting price should be inclusive of
packing, forwarding, loading, unloading etc.
Section (D) PARTITION
599 GLASS PARTITION
Providing,fixing,installing partition of frameless
glazing made of 12MM toughened float glass
fixed to floor and ceiling with aluminium channels
(inserted in floor and ceiling) including backer
rod, transparent selicon sealents on joints of
glass partition complete as per drawing. Glass
area only shall be measured for payment. Items
included door made of 12MM thickness float Rupees Five
glass toughened with patch fitting etc. Including Thousand Five
top pivot, bottom and upper patch, floor lock Smt 1.00 5533.79 Hundred Thirty Three
strikeplate and floor spring of DORMA make, all And Paise Seventy
including cutting and making the floor proper. The Nine Only
quoting price should be inclusive of all types of
taxes & duties, packing, forwarding, loading,
unloading, installation. As per detail drawing &
choice of users department and Concern officers
in charge as directed by the Engineer.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 85 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
600 PARTITION (LAMINATE FINISH)
Providing and fixing all height partitions. The
basic structure shall be made out of the
Alluminium tubular/rolled section as framing
Aluminium Box Section size of 50mm x 40mm x
mm thickness Alu. sections, fixed by means of
al. angle of 1"x1"x1" size for proper fixity vertically
At 1200 mm c/c And Horizontaly 1500 mm c/c.
The entire Alu. frame work shall be covered with
12 mm thickness plywood IS 710 on both the
sides. All the gaps either vertical or horizontal
with proper material shall be filled properly. All
the vertical members of the partition shall be
inserted / fixed in the floor for proper strength
necessary provisions shall be made in the Smt. 1.00 5158.07
Hundred Fifty Eight
partition for the electrical conduits / switch
And Paise Seven Only
boards/etc. The external plywood components
including the thcikness of partition shall be
finished with 1 MM thickness decorative
laminate on both the sides. All visible exposed
area of the partition covered with Indian teak
wood bidding where ever required. It shall have
(3 coats) malamine sprey polishing finish. The
quoting price should be inclusive of all types of
taxes & duties ,packing, forwarding, loading,
unloading, installaion. As per detail drawing &
choice of users department and Concern officers
in charge as directed by the Engineer.
601 PARTITION (VENEER FINISH) (SIZE: 2400 x
Providing and fixing all height partitions. The
basic structure work shall be made out of the
Aluminium tubular/rolled section as framing
Aluminium Box Section size of 50mm x 40mm x
2 mm thickness Alu. sections, fixed by means
of al. angle of 1"x1"x1" size for proper fixity
vertically At 1200 mm c/c And Horizontaly
mm c/c. The entire Alu. frame work shall be
covered with 8 mm th. ply on both the sides. All
open sides of the framework shall be covered
with the 12 mm th.ply to cover the entire Rupees Seven
thickness of the partition. A wooden bidding of 75 Thousand Five
x 12 mm shall be provided as all open thickness Smt. 1.00 7594.19 Hundred Ninety Four
of the partition for door opening .The hinge side And Paise Nineteen
aluminum frame shall be in filled with wooden Only
All the gaps either vertical or horizontal shall be
filled properly with ideal material. All the vertical
members of the partitions shall be carefully
inserted / fixed in the floor (without damaging the
floor) & also shall be fixed to the structural ceiling
for proper strength.Necessary provision shall be
made in the partition for ele. Conduits, switch
boards,a.c. drain lines & ac’s. etc.as req. (The
item does not include various door shutters as it
being a separate item. The common member of
partition and frame of door will be considered in
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 86 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
602 MIDLE HEIGHT PARTITION (LAMINET -GLASS
FINISH ) (SIZE: 2400 x 1200 mm )
(Laminet Partition Upto 900 mm Height And
mm Thick Glass In Top 300 mm Height )
Providing and fixing Midle height partitions. The
basic structure work shall be made out of the
Aluminium tubular/rolled section as framing,
Aluminium Box Section size of 50mm x 40mm x
2 mm thickness middle Horizontal Rail at
bottom, at 900 mm Height And At 1200 mm heiht
& Vertical rail at 1200 mm Spacing . Alu.
sections, fixed by means of al. angle of 1"x1"x1"
size for proper fixity. The Alu. frame work Upto
900 mm Height shall be covered with12 mm th.
ply on both the sides & Alu. frame work Btwn 900 Smt. 1.00 4762.15
Hundred Sixty Two
mm to 1200 mm Covered By 12 mm thick
And Paise Fifteen Only
Toughned glass . All open sides of the
framework shall be covered with the 12 mm th.ply
to cover the entire thickness of the partition. A
wooden bidding of 75 mm x 12 mm shall be
provided as all open thickness of the partition .
All the gaps either vertical or horizontal shall be
filled properly with ideal material. All the vertical
members of the partitions shall be carefully
inserted / fixed in the floor (without damaging the
floor) & also shall be fixed to the structural ceiling
for proper strength.Necessary provision shall be
made in the partition for ele. Conduits, switch
603 Full HEIGHT PARTITION (HALF LAMINET -
HALF GLASS FINISH ) (SIZE: 2400 x 3000 mm
Partition Upto 1500 mm Height And 12 mm
Thick Glass In Remaining 1500 mm Height )
Providing and fixing Full height partitions. The
basic structure work shall be made out of the
Aluminium tubular/rolled section as framing,
Aluminium Box Section size of 50mm x 40mm x
2 mm thickness middle Horizontal Rail at
bottom, at 1500 mm Height And At 3000 mm
heiht & Vertical rail at 1200 mm Spacing C/C .
Alu. sections, fixed by means of al. angle of Rupees Four
1"x1"x1" size for proper fixity. The Alu. frame Thousand One
work Upto 1500 mm Height shall be covered Smt. 1.00 4162.21 Hundred Sixty Two
with12 mm th. ply on both the sides & Alu. frame And Paise Twenty One
work Btwn1500 mm to 3000 mm Covered By 12 Only
mm thick Toughned glass . All open sides of the
framework shall be covered with the 12 mm th.ply
to cover the entire thickness of the partition. A
wooden bidding of 75 mm x 12 mm shall be
provided as all open thickness of the partition .
All the gaps either vertical or horizontal shall be
filled properly with ideal material. All the vertical
members of the partitions shall be carefully
inserted / fixed in the floor (without damaging the
floor) & also shall be fixed to the structural ceiling
for proper strength.Necessary provision shall be
Section (E) CEILING / PANNELING
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 87 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
604 WALL PANELLING (VINEER FINISH)
Providing & Fixing wooden panelling on existing
walls / R.C.C. column by putting Aluminum frame
work of size 50 mm x 25 mm x min. 1.5 mm
thickness (Jindal, National, Hindalco) at
suggested interval, fixed with 1"x1"x1" L-Angle for
proper fixity (not more than 600mm on both
directions), covered with 12 mm thick plywood
(M1) fixed on entire framework. The panelling
should have necessary cut outs for electrical
conduits / switch boards / boxes etc. The entire
Rupees Six Thousand
panelling shall be constructed in complete line &
One Hundred Ninety
level by putting necessary packing as per the site Smt 1.00 6193.32
Three And Paise Thirty
condition. All external plywood components of
entire panelling shall be finished with 4 mm thick
Vineer (M23). All exposed teakwood finished
with 3 coats of monocoat polish.(M29) The
quoting price should be inclusive of all types of
taxes & duties ,packing, forwarding, loading,
unloading, installaion. As per detail drawing &
choice of users department and Concern officers
in charge as directed by the engineer.
605 WALL PANELLING (LAMINATE FINISH)
Providing & Fixing wooden panelling on existing
walls / R.C.C. column by putting Aluminum frame
work of size 50 mm x 25 mm x min. 1.5 mm
thickness (Jindal, National, Hindalco) at
suggested interval, fixed with 1"x1"x1" L-Angle for
proper fixity (not more than 600mm on both
directions), covered with 12 mm thick plywood
fixed on entire framework. The panelling should
have necessary cut outs for electrical conduits / Rupees Three
switch boards / boxes etc. The entire panelling Thousand Two
shall be constructed in complete line & level by Smt 1.00 3273.41 Hundred Seventy
putting necessary packing as per the site Three And Paise Forty
condition. All external plywood components of One Only
entire panelling shall be finished with 4 mm thick
Vineer. All exposed teakwood finished with
coats of monocoat polish.The quoting price
should be inclusive of all types of taxes & duties
,packing, forwarding, loading, unloading,
installaion. As per detail drawing & choice of
users department and Concern officers in charge
as directed by the engineer.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 88 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
606 ACCOUSTIC WALL PANNELING
Providing and fixing at site the acoustics wall
panelling by using the grid of power pressed GI
sections of IGL GYPSTEEL 45mm x 15mm x
0.90mm (minimum) as intermediate member
placed at max.c/c distance of 600mm c/c, 45mm
x 12mm x 0.70mm as ceiling section placed at
max.c/c distance of 600mm c/c and 45mm x
50mm x 0.90mm spacer piece in the centre of
grid. The gyp board perforated aheet of 600mm x
600mm of 12mm thick menat for acoustic
purpose to be fixed on the sections in perfect line
and level with the help of gyp screw, as per the Rupees Three
prescribed standards and workmanship by the Thousand Three
product manufacturer, the entire assembly will be Smt 1.00 3374.41 Hundred Seventy Four
minimum 75mm away from the existing wall as to And Paise Forty One
leave the air gap between the assembly and wall. Only
The excellent quality glass wool of 24kg density
and 50mm thick of Tuwiga or equiv. is to filled
and fixed in the chicken mesh of maximum
15mm woven grid which is fixed on the both side
of horizontal channel and fixed properly with the
help of wires and on the top external surface of
the perforated gyp board, a non woven ribbed or
design textured carpet 4mm thick avg.600 grams
per Smt. (unique/Bajaj or equiv) in approved
quality and shade to be fixed perfectly by using
SR 998 of FEVICOL brand. The work is to be
carried out up to all height of and it.
607 GYPSUM CEILING
P & F PLAIN FALSE CEILING INCLUDING
VERTICAL DROPS P & F suspended gypsum
(Saint Gobin) plain false ceiling by using standard
company sections (GYPSTEEL ULTRA), which
includes providing and fixing g.i. perimeter
channels of size 0.55 mm thick having one flange
of 20 mm. and another flange of nylon sleeves
and screws, at 610 mm centers. then suspending
g.i. intermediate channels of size 45 mm, 0.9 mm
th with two flanges of 15 mm each from the soffits
at 1220 mm centers with ceiling angle of width
mm x 10 mm x 0.55 mm thick fixed to soffits with
g.i. cleat and steel expansion fasteners. ceiling Rupees Five Hundred
section of 0.55 mm. thickness having knurled Smt 1.00 517.12 Seventeen And Paise
web of 51.5 mm. and two flanges of 26 mm each Twelve Only
with lips of 10.5 mm. area thenfixed to the
intermediate channel with the help of connecting
clips and in direction perpendiclar to the
intermediate channel at 457 mm. centers.
mm tapered edge gyp board (conforming to is -
2095-1982) is then screw fixed to ceiling section
with 25 mm drywall screws at 230 mm
centers.screws fixing is done mechanically either
with screwdriver or drilling machine with suitable
attachment. Standard company manufactured
sections (GYPSTEEL ULTRA) should be used for
the entire framework. Finally the board of size 6’
x 4’ are to be jointed and finished so as to have a
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 89 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
608 MODULAR CEILING
Providing and fixing 15mm thick Mineral Fibre
Ceiling Tiles with VT S-15 Edges of AMFTopiq
Tiles of size 600 x 600mm Having 0.9 NRC
According to EN ISO 354,HUMIDITY
RESISTENCE UP TO 100%,FIRE CLASS A1
ACCORDING TO EN ISO 13501 ,COLOUR RAL
9010. intrue horizontal level suspended on inter
locking metal grid of hot dipped galvanised steel
sections (galvanized @ 90 gsm/sqm) consisting
of Main "Tee", size 15x32x3600mm made from
0.30mm thick (minimum) sheet spaced at
1200mm centre to centre and Cross "Tee", size Rupees Two
15x32x1200mm made of 0.30 mm thick Thousand Seven
(minimum) sheet to be interlocked between the Smt. 1.00 2721.95 Hundred Twenty One
main T runners at the distance of 600mm centre And Paise Ninety Five
to centre to create 1200x600mm module. Cross Only
"Tee", size 15x32x600mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of
the 1200x600mm module to form grids of
600x600mm to lay 15mm thick mineral fibre false
ceiling tiles in VT-15 edges of approved texture in
the grid including, wherever, required, cutting /
making, opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc.
Perimeter trim to be L shaped angle of size
20x14x3000mm, in 0.43mm thickness of GI
sheet, screwed to wall at 450mm maximum
centres. Main "Tees" to be suspended from
609 VENEER FINISH FALSE CEILING
Providing,fixing, installation and comissioning at
all height false ceiling of 18 mm thick BWP
grade plywood IS 710 including providing and
fixing of entire frame work made of special
teakwoo having size 75 mm x 38 mm and
consisting of angle cleats of size 25mm x 20 mm
at 600 mm / centre to centre on fixed to the
ceiling with dash fastner 12.5mm dia x 40mm
long with 6 mm dia. bolts to the angle hungers of
25 x 25x 5 mm of required length, an other end of
angle hanger being fixed with nuts and bolts to
6.1 channels 45 mm x 15mm x 0.9mm running at
the @ of 1200mm centre to which the every
junction including hanging with roof, with 25mm Smt 1.00 4701.55
Hundred One And
long drive- all screws @ 230mm interval including
Paise Fifty Five Only
joining and fixing to a flush finish. The wooden
ceiling will be finished with the approved make
mm thickness teak veener finished with two
coats of sealer and two coats of melamine spray
polish as per directions and also including the
cost of making openings for light fittings , grills
diffusers , cut outs made with for AC frame of
suitably fixed finishing of all joints neatly to proper
line and levels including providing of additional
frame work for electricals fixtures including giving
trap doors where ever required. Diffusers, cutouts
for fire smoke dectactor etc. as per the
specification approved by architects including
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 90 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
610 FALSE CEILING (SHERA)
Providing & fixing decorative panelling on wall .
Framing shall consist of alumimium section
60MMx40MM wall thickness of 2 MM @
600MM/600MM c/c. both way horizontally and
vertically on the way. The framing would be
covered by 8MM thickness Celluloid sheets
Thousand Six Hundred
shera sheets indian standard. Finished with 1 Smt 1.00 2602.77
Coats of birla putty 1 coats of primer and 3 coats
Seventy Seven Only
of nova paint. The quoting price should be
inclusive of all types of taxes & duties ,packing,
forwarding, loading, unloading, installation. And
work shall be done as per detailed drawing and
as directed by engineer in charge.
611 WALL CLADDING (SHERA)
Providing & fixing decorative panelling on wall .
Framing shall consist of alumimium section
60MMx40MM wall thickness of 2 MM @
600MM/600MM c/c. both way horizontally and
vertically on the way. The framing would be
covered by 8MM thickness Celluloid sheets
Thousand Six Hundred
shera sheets indian standard. Finished with 1 Smt 1.00 2677.51
Seventy Seven And
Coats of birla putty 1 coats of primer and 3 coats
Paise Fifty One Only
of nova paint. The quoting price should be
inclusive of all types of taxes & duties ,packing,
forwarding, loading, unloading, installation. And
work shall be done as per detailed drawing and
as directed by engineer in charge.
612 ACP CLADDING
Providing and fixing (50 x 25 x 1.6 mm )
aluminum, extruded section placed not more than
600 cc finished with 4 mm thickness 0.5 mm &
alloy AA3000 series exterior grade aluminium
composite panel of approved make and as per
drawing, ACP should be fixed using 3M tape and
weather silicon selant of approved make at all
joints and grove should be filled with 3M sealant.
The brand of silicon sealant and 3M tape should
Smt 1.00 4721.75 Hundred Twenty One
be confirmed with engineer In charge. The rates
And Paise Seventy
shall inclusive of necessary fixture and fitting,
sealant etc. Inclusive cost of scaffolding
Complete. The quoting price should be inclusive
of all types of taxes & duties ,packing, forwarding,
loading, unloading, installation. Supplied strictly
as per our technical specifications and make. As
per the direction of the engineer In charge.
Section (F) STORAGE
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 91 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
613 FULL HEIGHT (HEIGHT = 2100 MM) /
LOW HEIGHT STORAGE (HEIGHT = 900 MM)
LAMINATE FINISH
Providing and supplying Full height Storage unit
made with using 19mm Thk. Plywood structure
and finished with 1.0 mm Thk. decorative
laminate sheet on outside & and 0.8 mm Thk.
liner laminate in inside as specified approved by
architect with fixed with necessary fixtures and
fastening (Hardware) As per architect drawing. Rupees Five
The shutter shall be fixed with required handle Thousand Six Hundred
D62, hinges, magnet & Locks complete with Sixty Nine And Paise
bidding patties and all required hardware. Ply Thirteen Only
shelves removable Type supported on side teak
wood battens on both sides. All exposed edges
shall be covered with 8 mm Thk. Teak wood
beading Patti finished with melamine polish.
Complete or as directed as per architect drawing
and as per instruction of architect & engineer in
614 FULL HEIGHT (HEIGHT = 2100 MM) /
LOW HEIGHT STORAGE (HEIGHT = 900 MM)
Providing and supplying Full height Storage unit
made with using 19mm Thk. Plywood structure
and finished with 1.0 mm Thk. decorative
laminate sheet on outside & and 0.8 mm Thk.
liner laminate in inside as specified approved by
architect with fixed with necessary fixtures and
fastening (Hardware) as per architect drawing.
The shutter shall be fixed with required handle,
Smt 1.00 9015.26 Thousand Fifteen And
hinges, magnet & Locks complete with bidding
Paise Twenty Six Only
patties and all required hardware. Ply shelves
removable Type supported on side teak wood
battens on both sides. All exposed edges shall be
covered with 8 mm Thk. Teak wood beading Patti
finished with melamine polish. Complete or as
directed as per architect drawing and as per
instruction of architect & engineer in charge.
615 PANTRY CUP BOARD
Providing & fixing box type compartment below
Pantry of required size and as per detailed
drawing constructed the compartment / box
/doors by 19 MM plywood, inside the
compartment / box / doors applying 0.8 MM
balancing laminate & outside the box /
compartment / doors, drawers applying 1MM
thickness laminate of approved shade and make.
Thousand Six Hundred
Framing should be made of 40 mm X 60 mm
Smt 1.00 3629.94 Twenty Nine And
Framing pattis. Including cost of all materials as
Paise Ninety Four
S.S. handles and other required hardwares. The
cost Inclusive of cost of all necessary hardware,
fittings & fixtures, fastenings, etc., also inclusive
of the carpentary labour,packing forwarding,
transportation & cost of malamine polishing. All
the materials shall be used as per approved
make. And work shall be done as per drawing or
directed by engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 92 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
616 OVERHEAD CUPBOARD
Providing & fixing wooden cabinet ,entire
structure will be made with 18/12/8MM plywood
IS 710, 1MM laminate on all visible part and
inside the cupboard 0.80 MM thickness
balancing laminate where ever required , also
applying teak wood bidding on all exposed sides
of the door & frames, the size of teawood bidding
is 25 X 12 MM, The cupboard will have 12MM
glass shelves . The door of cupboard shall be
Rupees Ten Thousand
made up of 18 MM plywood & and it also
Five Hundred Twenty
includes the provision for 6MM transparent glass Smt 1.00 10525.21
Five And Paise Twenty
at the centre of door and designed frosted film.
with including the cost of hardware i.e S.S auto
hinges, 100MM(L) S.S.handels, etc. Inclusive of
cost of all necessary fittings & fixtures,
fastenings, etc., Also inclusive of the carpentary
labour,packing forwarding, transportation & cost
of malamine polishing. All the materials shall be
used as per approved make. And work shall be
done as per drawing or directed by engineer in
617 ALUMINIUM PROFILE SHUTTER
Providing & fixing aluminium profile shutter of
required sizes. Specially the section shall be
made of Aluminium Alloy Extrusions conforming
to IS: 732-1983 and IS: 1285- 1975; Annodized
and specified colour / natural) matt finished
Smt 1.00 7921.43 Hundred Twenty One
conforming to IS: 1868-1983 with necessary
And Paise Forty Three
accessories/ enox auto hinges. The quoting price
should be inclusive of all types of taxes & duties
,packing, forwarding, loading, unloading,
installation. As per direction of engineer - In-
Providing & Supplying Books Storage Sliding
Door Cub Board (VSDU) having Size-1830mm
Height X 900mm Width X 450mm Depth. Rigid
knock down construction. Back side and door are
made from 0.7 mm high yield strength CRCA,
rest in 0.8 mm CRCA. Sliding door arrangement
with top hanging arrangement to prevent
derailment. Each door provided with 2 plastic
roller having steel ball bearing for smooth Rupees Twenty Nine
movement of door less noise. 5 lever cum lock Thousand Seven
height wise adjustable self mounting , UDL Nos. 1.00 29743.49 Hundred Forty Three
capacity is 40 kg max. Finish with epoxy And Paise Forty Nine
polyester powder coated thick 50 microns. Screw Only
type leveller with hex plastic base, metal top.
Number of shelves in each compartment -
Nos. The quoting price should be inclusive of all
types of taxes & duties ,packing, forwarding,
loading, unloading, installation. Supplied strictly
as per our technical specifications and make.
{Godrej} As per the direction of the engineer In
Section (G) DOOR
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 93 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
619 DOOR WITH LAMINATE FINISH
Providing & Fixing Wooden Decorative Door
made with 30 mm thickness BWP Indian
standard. with both side 1 mm thickness laminate
having 30 x 12 mm thick teakwood bidding on all
exposed edges where ever required. All exposed
teakwood bidding finished with 3 coats of
monocoat polish and with other necessary
Thousand Six Hundred
hardware i.e , S. S. Door Hinges, Decorative Smt. 1.00 7614.39
Fourteen And Paise
Door Handle,mortice lock , door stopper etc.
Thirty Nine Only
Complete with necessary fixtures and fasteners
of approved make. The quoting price should be
inclusive of all types of taxes & duties ,packing,
forwarding, loading, unloading, installation. As
per detail drawing and as directed by the
Engineer in Charge.
620 DOOR WITH VENEER FINISH
Providing & Fixing Wooden Decorative Door
made with 38 mm thickness BWP Indian
standard. with both side 4 mm thickness teak
veneer having 50 x 12 mm thick teakwood
bidding on all exposed edges where ever
required. All exposed teakwood bidding finished Rupees Fifteen
with 3 coats of monocoat polish and with other Thousand One
necessary hardware i.e , S. S. Door Hinges, Smt. 1.00 15168.18 Hundred Sixty Eight
Decorative Door Handle,mortice lock , door And Paise Eighteen
stopper etc. Complete with necessary fixtures Only
and fasteners of approved make. The quoting
price should be inclusive of all types of taxes &
duties ,packing, forwarding, loading, unloading,
installation. As per detail drawing and as directed
by the Engineer in Charge.
Providing and fixing frameless glass door with s/s
patch fitting consisting Of 12 mm thickness
etched toughened glass with (pt
standard)/eckelt/austvision. Patch fitting such as
pt24-top pivot, pt-20-top Patch, pt-10-bottom
patch, us 10 corner lock with epc, lock keeper
plate, 'h' pull handle tgdi-h-450 (ctc 350 mm
diameter 25 mm) and Floor spring (approved
make and model) with standard spindle
conforming to din en 1154 and ce marked, non-
handed unit suitable For door up to 120 kg leaf
weight, with adjustable spring strength (size en 1 Rupees Thirteen
– 4) and closing speed, with closing action Thousand Two
operational From approximately 175 degree, Smt. 1.00 13206.76 Hundred Six And
fixed hold open at 90 degree and stainless steel Paise Seventy Six
cover plate. Featuring hydraulically fully Only
Controlled closing cycle, mechanical back check
and including cement box. Dimension of the floor
spring body length: 285 mm, Width: 82 mm and
height: 50 mm and weight: 3 kg. Finish: satin
stainless steel. (note: opening size 900 mm x
2100 mm single leaf, eachLeaf weight upto
kg). for fixing the s/s patch fitting at lintel level the
list of the items s/s fittings and accessories shall
be As below: 1. Pivot pt 24 with fixing plate,
material thickness 3 mm, to let into the ceiling.
Pt standard bottom patch fitting-pt 10-ss Finish.
3. Pt standard top patch fitting-pt 20-sss finish.
Section (H) MISC. ITEAMS
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 94 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
622 FLATBED TROLLEY
Providing & Supplying flatbed metal platform
trolley,with maximum load capacity 500kg, heavy
duty steel platform, mobile flatbed cart. Having
size 1200 x 800 x 1000 mm. The entire structure
shall be made with cold rolled steel and top Rupees Ten Thousand
trolley having solid plate frame welded. Having Two Hundred Fifty
handrail 32 mm Ø and with 2mm wall thickness. Three And Paise Fifty
Caster Ø 150 mm ie PU Wheel 2 directional with Two Only
2 universal break. The cost including loading,
unloading and Transportation Charges ect. As
per choice of users department and Concern
officers in charge as directed by the engineer
623 NOTICE BOARD WITH GLASS DOOR
Providing & Supplying Notice Board with Glass
door for display purpose with locking mechanism,
having size of 1600 (L) X 1200 (W) X 100 (D)
mm, made up of powder coated steel structure Rupees Ten Thousand
with glass in door with locking facility, etc. The Two Hundred Ninety
quoting price should be inclusive of all types of Four And Paise Ninety
taxes & duties ,packing, forwarding loading, Three Only
unloading, installaion. As per choice of users
department and Concern officers in charge as
directed by the Architect/Engineer.
624 STORAGE RACK (SLOTTED)
Providing & Supplying Approve Make and Model
Storage Rack made from MS As per choice of Rupees Three
users department and Concern officers in charge Thousand Five
as directed by the Architect/Engineer. The Hundred Fifty Five And
quoting Price Including Cost of packing, Paise Twenty Only
forwarding, loading, unloading, installaion.
Providing and supplying stool table top made with
using 19mm Thk Plywood finished with 1.0 mm
Thk decorative laminate sheet fixed with
necessary fixtures and fastening (Hardware).
Whole structure made with using required size of
M.S frame structure finished with approved
superior quality synthetic enamel paint of Nos. 1.00 4999.50
Hundred Ninety Nine
standard metal and ISI markets confirming to IS-
And Paise Fifty Only
2392 shall be applied. Complete as per
architect’s drawings and as per instruction of
architects and engineer in charge. M.S. structure
of stool:Square box pipe size 25 x 25 x 1.25mm,
Stool size: 45 x 45 x 66 cm
Providing and supplying seminar hall stage made
with using 19mm Thk plywood and good quality
wood frame structure with required necessary
legs support fixed with necessary fixtures and Rupees Four
fastening ( hardware) All exposed edges shall be Thousand Nine
covered with required teak wood beading Patti. Hundred One And
The whole Dias Top & open Sides must be Paise Fifty Three Only
finished wooden flooring. Complete as per
architect’s drawings and as per instruction of
architect and engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 95 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
627 NOTICE BOARD
Providing & Supplying Notice Board with Portable
Loop Fabric Panel Floor Display Stand,Panel
Dimensions: 120cm Wide x 168cm High, Overall
Display Height: 203cm, Panel Display Frame
Finishes: Light Gray or Beige,Loop Fabric Colors Rupees Four
Available: (Blue),Casters (Wheels) are included Nos. 1.00 4008.69 Thousand Eight And
for easy portability,Set up quickly and easily Paise Sixty Nine Only
Includes stable, snap-lock feet, for alternative to
casters specifications As per choice of users
department and Concern officers in charge as
directed by the Architect/Engineer.
Providing and supplying Podium made with using
19mm Thk Plywood structure finished with
mm Thk decorative laminate sheet approved by
architect fixed with necessary fixtures and
fastening (Hardware) all edges shall be covered Rupees Six Thousand
with required Teak wood beading Patti finished Three Hundred Four
with approved melamine polishing work. The And Paise Forty Two
podium shall also provision for carrying wires & Only
mounting electrical plug point, switches & mike
etc. Complete as per architect’s drawings and as
per instruction of architect & engineer in charge.
Size : - 58 x 38 x 110 cm
Providing & Supplying Notice Board with
Convenient way for storing keys with door
lock,Door Cover with locking method for security Nos. 1.00 3466.32
Hundred Sixty Six And
purpose As per choice of users department and
Paise Thirty Two Only
Concern officers in charge as directed by the
Architect/Engineer.
630 GARBAGE BIN
Providing and supplying Approved Make Non
Magnetic Garbage Bin thickness not less than
0.4 mm made with SS 304 Grade sheet which
has very good material strength, and it is also
Sturdy and Light weight, with volumemetric
capacity Ranging from 5 to 8 Kg, with/without
paddle as per choice of user department. Easy to
Nos. 1.00 1733.16 Hundred Thirty Three
clean, corrosion free and also matt finished
And Paise Sixteen
buffing process. The quoting price should be
inclusive of all types of taxes & duties,packing,
forwarding, loading, unloading, installaion.
Supplied strictly as per our technical
specifications and make. (Godrej) As per the
direction of the Architect/ Engineer In charge.
631 S.S SIGNAGES
Providing & Fixing S. S. Plate Signages having
size of 14 In. X 5 In. X 1.2 mm thick name plates
with matt finish buffing process of 304 grade
mentioning officers names/designations etc. The
Rupees Nine And
quoting price should be inclusive of all types of Sq.Inch. 1.00 9.09
Paise Nine Only
taxes & duties ,packing, forwarding, loading,
unloading, installaion. As per choice of users
department and Concern officers in charge as
directed by the Architect/Engineer.
632 WRITING DESK
Providing & Supplying Approve Make and Model Rupees Seven
Writing Desk As per choice of users department Thousand Seven
and Concern officers in charge as directed by the Nos. 1.00 7765.89 Hundred Sixty Five
Architect/Engineer. The quoting Price Including And Paise Eighty Nine
Cost of packing, forwarding, loading, unloading, Only
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 96 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
Providing & Supplying synthetic door mats size
not less than 1200 x 600 mm. The cost including Rupees Five Hundred
loading,unloading and Transportation Charges Smt 1.00 594.89 Ninety Four And Paise
ect. As per choice of users department and Eighty Nine Only
Concern officers in charge as directed by the
engineer incharge.
634 NATIONAL AMBELEM
Providing and Fixing 'Satyamev Jayate' logo
plate made out of Brass with engraving
side circumference and embossing the
logo/letters in the center with superior quality Rupees Eighteen
red velvet in the background as per image and Thousand Eight
detail measurement provided with buffing matt Hundred Ninety Four
finish etc. complete as per existing sample in the And Paise Seven Only
Prant officer Chamber Radhanpur as Per
Instruction by Authority and Engineer in Charge.
635 PREPARAING STRONG ROOM
Providing & Fixing 19 mm thick plywood sheet
(M5) & Half Brickwork Partitionto the existing Rupees Two
windows for preparing strong room and covering Thousand Six Hundred
the window glass with Frosted film. As per Forty Two And Paise
choice of users department and Concern officers Sixteen Only
in charge as directed by the Architect/Engineer.
636 PERSONAL LOCKER
Providing & Supplying Approve Make and Model Rupees Sixteen
Personal Locker As per choice of users Thousand Seven
department and Concern officers in charge as Nos. 1.00 16724.59 Hundred Twenty Four
directed by the Architect/Engineer. The quoting And Paise Fifty Nine
Price Including Cost of packing, forwarding, Only
loading, unloading, installaion.
637 HYDRAULIC DOOR CLOSER
Providing & Fixing Heavy Duty hydraulic Door
closer surface mounted type (grade 3) of
standard make made of cast aluminium body,
105'degree openable fixed to the door with all
necessary fixtures & fasteners etc. {Make :-
Nos. 1.00 2777.50 Hundred Seventy
Godrej or Dorma}. The quoting price should be
Seven And Paise Fifty
inclusive of all types of taxes & duties ,packing,
forwarding, loading, unloading, installation. As
per choice of users department and Concern
officers in charge as directed by the engineer In
638 ACCUSED BOX
Providing and supplying wooden accused box in
courtroom having 1800 m x 1200 m x 1200 m
base from 19mm thick MR grade ply wood of IS
303 of approved brand covered with 1,5mm thick
laminate of approved brand,shade, pattern,
having 1.20m high wooden railing on three sides
with 75mm x 75mm size wooden pillars at all
corner and hand rail at top carved out as per
detail drawings, 50mm x 50mm wooden battens Rupees Fifty One
in railing and with provision of writing desk made Nos. 1.00 51106.00 Thousand One
from laminated plywood of IS 303, MR grade. All Hundred Six Only
wooden parts should be polished with 2 sealer
coat and 3 melamine polish coats. The work also
includes all necessary hardware, fixtures and
fasteners etc. The cost including
loading,unloading and Transportation Charges
ect. As per choice of users department and
Concern officers in charge as directed by the
engineer incharge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 97 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
639 WITNESS BOX
Providing & Supplying Witness Box having size
1000 (L) x 800 (W) x 1200 (H) MM height made
up of Indian teakwood with special carving having
base frame 18mm thick MR grade ply wood of IS
303 of approved brand covered with 1,5mm thick
laminate of approved brand,shade, pattern,
having 1.20m high wooden railing on three sides
with 75mm x 75mm size wooden pillars at all
corner and hand rail at top carved out as per Rupees Forty Five
detail drawings, 50mm x 50mm wooden battens Thousand Five
in railing and with provision of writing desk made Hundred Fifty One
from laminated plywood of IS 303, MR grade. All Only
wooden parts should be polished with 2 sealer
coat and 3 melamine polish coats. The work also
includes all necessary hardware, fixtures and
fasteners etc. The cost including
loading,unloading and Transportation Charges
ect. As per choice of users department and
Concern officers in charge as directed by the
engineer incharge.
640 MORTISE LOCK
Providing, Fixing & Installation Heavy Duty (Make
:- Godrej) mortise lock. Reversible latchbolt with
double throw of deadbolt provides enhanced
security. Having hardened pins in the deadbolt Rupees Two
resist sawing. Operable by key from outside as Thousand Sixty Six
well as inside. Made with 14 pins making it And Paise Forty Six
difficult to duplicate. The quoting price should be Only
inclusive of all types of taxes & duties ,packing,
forwarding, installaion. And as directed by the
engineer in charge.
641 FLOOR SPRING
Providing, Fixing & Installation of Heavy Duty
Floor Spring (Make :- Godrej). Having 100 -120
Kg load capacity. With Adjustable closing speed
and latching speed, Mechanical hold open at 90 Rupees Seven
degrees,High grade cast iron body housed in Thousand Nine
galvanised steel box, Thermostable hydraulic Nos. 1.00 7999.20 Hundred Ninety Nine
fluid to ensure smooth operation in any condition, And Paise Twenty
SS 304 Coverplate for high corrosion Only
resistance.The quoting price should be inclusive
of all types of taxes & duties ,packing, forwarding,
installaion. And as directed by the engineer in
Section (I) CURTAINS
642 CLOTH CURTAINS
Providing and fixing cloth curtains of cotton or
semi-cottton fabric with three plated or ring type
curtain pattern .with the basic rate of fabric
per sq.mt. The fabric with backing cloth {black
out} and 25MM OD 1.2MM thickness-304 grade
mate finsih SS rods & SS.clamps , with
Smt 1.00 2031.11 Thousand Thirty One
necessary other fixture and fastening etc. The
And Paise Eleven Only
quoting price should be inclusive of all types of
taxes & duties ,packing, forwarding, loading,
unloading, installaion. As per choice of users
department and Concern officers in charge as
directed by the engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 98 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
643 ROLLER BLINDS
Providing and supplying Roller Blinds assemblies
are to be supplied & installed in all windows with
great precision. It should be water resistant and Rupees Three
fitted on aluminum head rails duly powder coated Thousand Four
and fitted with stainless steel drive rods. Manual Hundred Forty One
operated and should have ISI mark. Complete or And Paise Seven Only
as directed as per architect & engineer in charge.
644 ZEBRA BLINDS
Providing & Installation Zebra Blinds, assemblies
are to be supplied and installed in all windows
with great precision. It should be water resistant
and fitted on aluminium handrails duly powder
coated and fitted with stainless steel drives rods
Smt 1.00 4316.74 Hundred Sixteen And
etc. The quoting price should be inclusive of all
Paise Seventy Four
types of taxes & duties ,packing, forwarding,
loading, unloading, installation. As per choice of
users department and Concern officers in charge
as directed by the engineer in charge.
645 AREBIAN CURTAIN
Providing & Fixing Arebian curtains with arebian
channel and arebian belt on window. The curtain
tepestary colour, design as per the
instruction/choice of the engineer/user in charge,
with all necessary hardware fitting, material and Smt 1.00 2566.41
Hundred Sixty Six And
labour etc. The quoting price should be inclusive
Paise Forty One Only
of all types of taxes & duties ,packing, forwarding,
loading, unloading, installation. As directed by
the engineer in charge.
Section (J) DECORATIVE ITEAMS
Providing & laying of designed cut pile base
interface carpet with extended brush stroke
pattern and naturally calm colour palette tufted
textured tip sheared loop made from BCF Nylon
Type 6 - 100 % Recycled content. The floor
which recieves the carpet to be thourougly
cleaned. The carpet is to be laid over a existing
bed with approved adhesive spread evenly over
the entire floor. (Basis Cost :- 2450 Sq.Mt) The Rupees One
rate shall include cutting, trimming, fixing and Thousand Five
clearing away of residual material to a location as Smt 1.00 1558.43 Hundred Fifty Eight
directed. The laid carpet to be vacuumed after And Paise Forty Three
the removal of protective cover/on Only
commissioning. If after the protective layer is
removed and stains observed in the carpet
because of in adequate protection, the same
shall be cleaned. Supplied strictly as per our
technical specifications. The cost inclusive of
installation labour, necessary hardware, adhesive
etc. And work shall be done as directed by
engineer in charge.
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 99 of
Item of Work Unit Qty. according to
No. In Figure In Words estimated quantities
647 WOODEN FLOORING (DOMESTIC)
Providing and laying 8 mm thick LAMINATE
WOODEN FLOORING OF PERGO ORIGINAL
(matt finish) consisting of panels of size 1194 mm
x 194 mm having class use - 23/33, wear
resistance level of AC05 as per with a high
pressure laminate surface treated with aluminium
oxide and specially patented SURFACE GUARD
+ on top of high density fiber board with a density
of 910 kg/cum. The panels having a click system
tongue and groove joint to secure a long lasting
joint with the edges duly impregnated with Smt 1.00 1999.80
Hundred Ninety Nine
paraffin. The floating laminate flooring shall be
And Paise Eighty Only
laid over a 0.20 mm thcik polythene film to form a
vapour barrier and 2 mm to 3 mm thick PERGO
FOAM under layer to reduce impact sound etc.
The quoting price should be inclusive of all types
of taxes & duties ,packing, forwarding, loading,
unloading, installation. Supplied strictly as per our
technical specifications and make. As per the
direction of the engineer In charge.
Providing & applying of decorative canvas base
PVC wall paper ( plain textured) fixed with anti
bacterial adhesive bartoline. of green or Rupees One
equivalent), it comes in roll from 21" or 42". The Thousand Nine
quoting price should be inclusive of all types of Hundred Thirty And
taxes & duties ,packing, forwarding, loading, Paise Eleven Only
unloading, installation. As per choice of users
department and Concern officers in charge as
directed by the engineer in charge.
649 3-D WALLPAPER
Providing & applying of decorative canvas base
PVC wall paper (plain textured) storical or
natural, fixed with anti bacterial adhesive Rupees Five
bartoline. (Basic Rate 3500 / Per Sq. Mt.) it Thousand Two
comes in roll from 21" or 42". The quoting price Smt 1.00 5276.24 Hundred Seventy Six
should be inclusive of all types of taxes & duties And Paise Twenty
,packing, forwarding, loading, unloading, Four Only
installation. As per choice of users department
and Concern officers in charge as directed by
Providing and applying decorative 3M scotch
tape or glass. The glass shall be covered with 3M
scotchcar special effect film series 7725 as the
given design by the computerised plotter cutting
process. The appplication of the 3M special
effect film shall be done by a 3M trained
applicator. 3M scotch special effect film shall
necessarily match the following parameters :-
Thickness 2 mils (0.06 MM) without adhesive, Rupees Four
Linear - Transparent synthetic , Opacity - Thousand Eight
Translusent , Adhesive - Clear , Pressure Smt 1.00 4824.77 Hundred Twenty Four
sensetive,Minimum application temprature 40* F And Paise Seventy
(4* C), Flat surface only , chemical resistence - Seven Only
Resist wild acid , mild alkalis ans salts , excellent
water resistent. (Basic Cost :- Not Less then Rs.
3200 Sq.Mt). The quoting price should be
inclusive of all types of taxes & duties ,packing,
forwarding, loading, unloading, installation. As
per choice of users department and Concern
officers in charge as directed by the engineer in
E:\Vav - Tharad\BKC\Tender\Online\Building\2026-27\Annual Building - Deodar\ Page 100 of
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Building Spacification Book Part -1.pdf
Building Spacification Book Part -2.pdf
Building Spacification Book Part -3.pdf
Special Condition (Earth Work - CBR Test).pdf
Special Condition (Masonry Work).pdf
Special Condition (RCC).pdf
Special Condition For the Tender.pdf
Special Condition Liquidated damages.pdf
BOQ.pdf
NIT.pdf
Download all tender documents and submit your bid