TBHES

Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Make Vasavi.

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit in brick wall

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make as directed by the Engineer in charge .a 100 x 75 x 65 mm

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box complete as directed by the Engineer in Charge Make GM(GX 10 Model). a.1 to 2module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 wherever necessary complete for finished item of work as directed by the Engineer in charge. Make GM GX 10 Model a 6A One Way switch

b 6A Three Way socket

c 20A one way flush type switch with Indicator

d 6/16A Universal Socket

e Stepped/Dimmer fan regulator Two Module

f LED Foot light

Supplying And fixing/replacing of 6/16/32A electrical accessories, Make-cona. a 6A Bakelite Ceiling Rose

b 6A Lamp Pendant/Batten Holder/Adopter

c 16A Three Pin Top

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Wire MakeMake only-HR FR-LSH LF Polycab Maxima +. Short point upto 3m from tapping point to out let via switch box

Medium point above 3m upto 6m from tapping point to out let via switch box

Long point above 6m upto 10m from tapping point to out let via switch box

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 as directed by the Engineer in charge. Make only-HR FR-LSH LF Polycab Maxima + a) 1 sqmm Copper wire.

b) 2.5 sqmm Copper Wire

c) 4 sqmm Copper Wire

d) 6 sqmm Copper Wire

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixin materials and 'C' Type curve,indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 and as per the approval of the Engineer in charge. L&T Make. 6-32 A SP

Supplying & fixing retrofit type-PL- LED Lamp. Make Havels. 9-10 W

Supplying and fixing of 4 feet -PVC Batten with integrated LED tube 40W, 6500K light fitting 1 x 4' - 40 W, as directed by the Engineer in charge. Make Havell's.

Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc,for operation on 230V,50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200 mm). Make Havell's as selected by the Engineer in charge.

Supplying and fixing one of 230 V bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Ding Dong Type, Make-GM .

Supplying and Laying of 25sqmm, 1.1 kV, 4 Core XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable from LT pole to main board in the corridor with suitable areal fuse board on LT pole. Cable Make- Polycab.

Supplying and fixing of transparent fiber body box for housing Three phase meter and suitable wiring for incoming and outgoing connections for meter (meter not included) as specified by Engineer in charge as per market rates

Supplying and fixing of 10W LED Bulk Head Fittings Complete as per the approval of the Engineer-in-Charge. Make- GM.

Supplying and fixing of 12" Sweep (300 mm), 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply, reversable type complete for finished item of work as per the approval of the Engineer-in-Charge. Make- Bajaj.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia as directed by the Engineer in charge.

Supplying and fixing of Cement concrete ring of 1.5 Feet dia-2ft Depth as directed by the Engineer in charge.