PERIODICAL SERVICES TO OTM BUILDING AND

Amount

M&L for Preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of white wash at any height of bldgs/store houses/hangars complete all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

All as per item No.1 above but on ceiling complete all as specified and directed by Engr-in-charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for Preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of colour wash at any height of bldgs/hangars all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for Preparation of old treated surface of wall and applying one coat of oil emulsion distemper all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old painted surface of wood or wooden based surface of any description n.exc. 10cm width or girth and applying one finishing coat of synthetic enamel paint all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old painted steel surface of any description n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old treated wooden surface exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation of old treated wooden surface n.exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for applying one coat of cement base paint on old plastred surface including preparation of surface at any height of bldg/hangars/store houses all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for applying two coats of cement base paint on new plastred surface including a coat chalk whiting and preparation of surface at any height of bldg/hangars/store houses all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for applying one coat of antifungal paint on existing surfaces includiing preparation of surfaces at any storey of bldgs /hangars /store houses all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for applying two coats of antifungal paint over a coat of primer including complete removal of existing treatment at any storey of bldgs/hangars/store houses all as specified and directed by Engr-in- charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for complete removal of existing treatment of wall and applying two coat of acrylic washable distember over a coat of primer on plaster surface, preparatorey to receive distembering at any storey complete all as directed by engr-in-charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

M&L for preparation by washing, rubbing down and stopping of distember and painted surfaces of ceiling and applying one coat of acrylic washable distember at any storey complete all as directed by engr-in-charge Note : The quoted rate shall be inclusive of scaffolding upto 21m

Taking down of existing roof treatment consisting of any descriptions(brick,tiles,concrete) and removal of dismantled materials to a distance exc 500m and n exc 1 Km complete all as specified and directed

Material and labour for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bituminous aluminium paint @ 100 g/sqm, complete all as specified and as directed

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets any gauge thickness incl roof/Wall covering complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut on ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(Gde-E-250)quality-B complete all as specified and as directed

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

S & F in repair 6.3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each complete all as specified and as directed

M&L for prepration of new steel surfaces and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling ceiling boards of any description, any thickness including cover fillets.

S&F aluminium snap grid 605x605 mm false ceiling frame work of angle 25x25x2mm Main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm complete all as specified and as directed

S&F GI hangers 6mm dia (Upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.50mm dia ,40 mm long complete all as specified.

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distmper over one coat of alkali resistance primer complete all as specified and as directed

S & F 4mm thick non asbestios fibre cement building board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber/ aluminium frame work complete all as specified and as directed

Demolition of concrete in ground floors and pavings n exc 15 cm thick (below of above ground level) complete all as specified and as directed

M & L for providing, cement concrete1:2:4 type B-1 with using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges,beds etc complete all as specified and as directed

M&L for 75 mm thick cement concrete 1:3:6 type C2 40mm graded aggregate as in sub base complete all as specified and as directed

M&L for 40 mm thick cement concrete 1:2:4 type B1 20mm gde aggregate as in floor complete all as specified and as directed

S&F in repairs 2 mm thick PVC tiles/ sheets laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed

Dismantling floor/hearth and wall tiling including cement mortar bedding (but not backing), removing servicable tiles and rubbish off the premises.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 for laying floor finishes complete all as specified and as directed Note : Quoted rate shall be inclusive of screed bed

All as per item No: 37 but skirting/dado over and including 10 mm thick rendering CM 1:4 complete all as specified and as directed Note: Quoted rate shall be inclusive of backing coat

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 for laying floor finishes complete all as specified and as directed Note : Quoted rate shall be inclusive of screed bed

M & L for glazed coloured ceramic tiles in vertical surfaces 300 x 200 x 7 mm thick set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over and including 10 mm thick rendering CM 1:4 complete all as specified and as directed Note: Quoted rate shall be inclusive of backing coat

M & L for vitrified ceramic tile light shade, 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thickscreed bed or bedding layer of mortar inCM 1:4 all as specified and and directed Note : Quoted rate shall be inclusive of screed bed

M & L for vitrified ceramic tile light shade, 10mm thick (square /rectangular) polished area of each tile not exceeding 0.36 sqm , in vertical surfaces as in skirting including a backing coat of 10mm thick cement plaster in CM 1:3 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and and directed Note: Quoted rate shall be inclusive of backing coat

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & directed.

M & L for cement plaster 10 mm thick in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified & directed.

M&L for 1.50 mm thick wall care putty on internal walls all as specified and directed

M&L for preparing newly plastered wall surfaces and applying two coats of oil bound distmper over one coat of alkali resistant primer complete

Demolition of brick work built in cement mortar, including all quions, arches, pillar etc all as specified and directed by the Engineer-in-Charge.

Material and labour for Brick work with sub class B brick straight or curved on plan exc 6m mean radius , built in cement mortar 1:6 complete all as specified & directed.

Material and labour for Brick work as in half brick thick walls with sub class ‘B’ bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:4 complete all as specified & directed.

Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each including cutting holes complete all as specified & directed.

Taking down door/windows chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4 sqm each including cutting holes complete all as specified & directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F in repair 15mm dia fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&Fin repair 15mm dia fancy type chromium plated angle Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm Concussive push button taps of castcopper alloy, screwed for iron pipe and fixed complete all as specified & directed.

Taking down GI Tubing and connections including fitting 15 mm dia complete all as specified & directed.

Taking down GI Tubing and connections including fitting 20 mm dia complete all as specified & directed.

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repairs CP Jet 15mm bore for EWC with flexible tube and required fittings complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) complete all as specified and directed.

S& F in repair vitreous China urinals, bowl type size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets all as specified.

S&F in repair viterous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC10 ltr valveless, syphonic action type, including flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 110 mm plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) bends 75 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia vent complete all as specified and directed.

S&F in repair Aluminium anodised chromium plated towel rail 20mm dia D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

Demolition by breakingup drain pipes (salt glazed stone ware/AC/ RCC) 150 mm dia jointed in cement mortar and takinout of trenches and removing debris incl concrete bed haunching from the site to a distance n.exc 100 mtr all as specified and directed.

Excavation in trenches not exc 1.5M wide and not exc 1.5M depth for foundation , etc for shafts , wells , cess pits , man holes , etc 10 sqm on plan and getting out in soft/loose soil complete as specified and as directed

M&L for cement 1:3:6 type C2 with using 40 mm graded stone aggregate as in concrete bed to drain pipes 150 mm bore including packing under,and haunching against the sides of pipes after they are laid and tested; in omplete as specified and as directed

S & F 150 mm bore PVC (SWR) pipess single socketed in any length with rubber ring joints laid in trenches or in floor complete as specified and as directed by the Engineer-in-Charge

Returning, filling including spreading levelling watering and well ramming in layers not exc 25 cm thick(soft/loose soil)

Removal of excavated soil to a distance exc 50M and n.exc 100M and deposited at a level not exc 1.5M above the starting point as directed by Engineer-in-charge

M &L for cleaning the surface of existing glass on roof and providing silicon sealant for all side complete all as specified and directed

S&F in repairs for 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete at any height of bldgs/store houses: electrically operated type, complete (height up to 15m) all as specified and directed .

All as per item No Item No. 84 above but gear operated type with bevel gear box and crank shaft(height upto 15 m ) all as specified and directed

S& F Ball bearing for rolling shutter complete all as specified and as drected

Servecing existing rolling shutter of any size including greasing oiling and making the rolling shutter in operational condition including replacing minor parts such as screws, nut,bolts and handle etc complete all as specified and as directed by Engr-in-Charge

S&F in repairs 1.00 mm thick plain mild steel sheeting top cover of rolling shutter complete (height upto 15m) all as specified and directed

S&F in repairs of safety lever locks mild steel with 4 levers for rolling shutter complete all as specified

S&F in repairs MS spring for rolling shutters complete (height upto 12 m) all as specified and directed

M&L for greasing and oiling of existing hanger door and wheels of any size including cleaning of rails complete all as specifed and as directed

S &F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each or, hinges,anodised aluminum snap beading screws etc. complete all as specified.

S&F anodised aluminium frame for doors, windows, ventilators, partitions, cubicles etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handles etc. complete all as specified

Taking down eave gutters and rainwater pipes (any size or pattern), including all fittings, complete all as specified

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing on wall etc complete all as specified

Takin down aluminium door shutter partition of any description exc 2 sqm and not exc 4 sqm each and , easing and adjusting ,cutting to proper shape and re-fixing same position and also refixing builders hardware as required including renewal of unserviceable screws

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F Powder coated anodised aluminium frame for window/ventilator with or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coatedAnodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed

S &F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each or, hinges,anodised aluminum snap beading screws etc. complete all as specified.

S&F for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed

S&F 35 mm thick second class hard wood rail and style for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 30mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. dived into suares with plain chamferd or rounded mitred and rebated sashbars, any numbers, . fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed

S&F for mild steel works in holdfast plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L for PCC type B1, 1:2:4 ( 20 mm grated agg as in copins, bedblocks for hold fast etc all as directed

S&F 100mm stainless steel butt hinges,medium wt cold rolled complete all as specified and directed

S&F 100mm long Alumn anodised barrel tower bolt complete all as specified and directed

S&F 150mm long Alumn anodised barrel tower bolt complete all as specified and directed

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 125mm long Alumn anodised handle complete all as specified and directed

S&F 150mm long Alumn anodised handle complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed

kanjirathingal builders (BID ID -3206504)

Oriental Constructions (BID ID -3207726)