Construction of eLibrary on existing Library and Toilet Block inside the GFFF including internal WS SI Co 5000 ltrs capacity rain water harvesting tank and development of site for newly constructed Library Block at Govt Degree College Ghumarwin

Amount

Cutting in earth work in all heights/depths and in all kinds of soil such as kankar, moorum, shingal and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling/wedging out rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transportation, the disposal of the unserviceable material will be done on approved dumping site. Any damage to private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling/wedging out of hard or soft rock and disposal of all excavated earth up to any leads and lifts disposed earth to be levelled and neatly dressed as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work and chiselling/wedging out of hard or soft rock (where blasting is prohibited) up to all heights stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in15 Cms, Layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.

Excavation in drains and channels etc. in earth work in all kinds of soil such as pick work, jumper work and chiseling/wedging out of hard or soft rock up to all heights including dressing of sides and bed and disposing of excavated earth up to all leads and lifts and disposed earth to be levelled and neatly dressed including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts.

Foundations, footings, bases of columns and the like mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. up to 200 mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attaached pillasters buttresses, plinth and string courses and the like.

Columns, pillars, posts and struts:-

(i) Square rectangular or polygonal in plan.

(ii) Circular or curved in plan.

Beams, cantilever, girders and lintels. Sides and soffits of beam, beam haunchings cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all heights from floor.

Edges of slabs and breaks in floors and walls. Under 20 cm. Wide.

Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying upto floor all level cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size) and curing complete including form work in string courses coping bed plates, anchor blocks plain window wills and the like including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristics strength of M-20 GRADE and curing complete excluding the cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads and lifts.

Foundations, footings, bases of columns and the like mass concrete.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers lintels in all heights.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth string courses etc from top of foundation upto floor two level.

Columns, pillars posts and struts upto floor all level.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristic strength of M-20 GRADE for reinforced concrete chajjas not exceeding 10 cm thickness upto all heights including finishing the exposed surface with cement mortar 1:3(1cement:3sand) to give a smooth and even surface, centering/form work and curing complete excluding the cost of reinforcement including carriage of material in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete including cost of binding wire up to all heights including carriage of material in all leads and lifts.

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg of cement per sqm of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material in all leads and lifts.

Providing throating or plaster drip and moulding to RCC chajjas including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:8:16(1cement:8sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding the cost of form work screed laid under flooringincluding carriage of material in all leads and lifts.

Providing and laying cement concrete 1:5:10 with 15% plums and curing complete including the cost of form work for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300mm as per drawing and HP. PWD technical specifications including carriage of material in all leads and lifts.

Providing weepholes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawings face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level up to all floor level in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand) including carriage of material in all leads and lifts.

Stone filling behind retaining walls including carriage of material in all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/neoprene gasket etc., complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item):-

For doors windows and ventilators and glazed partition frames.

For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing offittings where ever required including the cost of PVC/neoprene gaskets required (fittings and glazing/paneling shall be pad for separately).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/neoprene gasket etc., complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item):-

Glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm).

Glazing with glass panes of 5.50 mm thickness (weight not less 13.75 kg per sqm.

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 G with wire of dia of 0.56 mm to windows and clerestory windows including 60x20mm beading of 2nd class deodar wood/aluminium section including carriage of matrial in all leads and lifts.

Providing and fixing aluminium anodized powder coated pattern to existing window/ventilator with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frame (Aluminium channels base frames to be measured and paid for separately) including carriage of material in all leads and lifts.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including clost of cutting floor as required embedding in floors and cover plates etc. complete as per the dirrection of Engineer-In-Charge including making good the floor including carriage of material in all leads and lifts.

P/F partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately.):- Gypsum board 12.5 mm thick. including carriage of material in all leads and lifts.

Prelaminated board bwp phenol bonded exterior/interior grade both sides 12mm thick including carriage of material in all leads and lifts.

Providing and fixing anodized aluminium sliding door bolts and anodized colour and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws, nuts, bolts etc. complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws, nuts, bolts etc. complete including carriage of material in all leads and lifts.

Providing and fixing bright finished hard drawn hooks and eyes ncluding carriage of material in all leads and lifts. 150mm.

Providing and fixng 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suuit shutter thickness complete including carriage of material in all leads and lifts.

Glazed tiles 6mm thick (any size/colour) in skirting riser of steps and dado 12mm thick cement mortar 1:3(1cement:3sand) and jointed with white cement slurry including carriage of material in all leads and lifts.

Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts:-.

40 mm thick

50 mm thick

Providing and fixing glass strips in joints of terrazzo floors including carriage of material in all leads and lifts:- 40 mm wide and 4mm thick.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 (1cement:4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete 25mm thick including carriage of material in all leads and lifts.

Kota stone slab 25mm thick in risers of steps skirting dado and pillars laid on 12mm (average) thick cement mortar 1:3(1cement:3sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of material in all leads and lifts.

Providing and laying granite work (Table rubbed and polished) in flooring 20mm thick base in cement mortar 1:3 (1cement:3sand) including jointing with cement mortar 1:2 (1white cement:2marble dust) with an admixture of pigment to match the shade of the marble 20mm thick white makrana marble including carriage of material in all leads and lifts.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.

Providing and laying Duro stone vetrified tiles (300x300x10mm)in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Provding and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured or of approved shade in skirting, risers sof steps and dados laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of requirred shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Providing angular fillet 7.5x7.5 cm cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Painting top of roofs with bitumen of approved quality at 17 kg for 10 sqm. impregnated with a coat of sand of 0.06 cum per 10 sqm. including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete including carriage of material in all leads and lifts:- With residual type petroleum bitumen of penetration 80/100.

Making khurras 45x45cm with average minimum thickness of 5 cm. cement concrete 1:2:4 (1cement:2sand:4 stone aggregate of 20mm nominal size) finished with 12mm cement plaster 1:3 (1 cement : 3 sand ) and coat of neat cement rounding the outlet complete incuding carriage of material in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing ridge or hips 60cm over all with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing valley 60cm over all with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing flushing 38 cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of rregular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter & prepainted G. I. limpet and bitumen washers complete with all accessories as required as per the dirrection of Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing 15 cm. Wide 45 cm overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of material in all leads and lifts :- 0.63 mm thick

Providing and fixing MS holder bat clamps of approved design to CI or PVC pipe embedded in and including cement concrete blocks 10x10x10cms of 1:2:4mix (1cement:2sand: 4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the walls etc. including carriage of material in all leads and lifts:- 150 mm diameter PVC pipe.

Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm. including filling the joints with approved adhesive complete including carriage of material in all leads and lifts:- 150 mm dia pipes.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain including filling the joints with approved adhesive complete including carriage of material in all leads and lifts:-

PVC Plain bend 150 mm dia.

PVC shoe 150 mm dia.

Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid for separately) complete including carriage of material in all leads and lifts.

Steel work welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material inn all leads and lifts.

In beams, joists, channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

In gratings, framed guard, bars, ladders, railings, brackets and similar work.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts andnuts locking arrangements,stoppers,handles,including applying a priming coat of red lead pain including carriage of material in all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter:-Enamel paint other than white including carriage of material in all leads and lifts.

6mm cement plaster to ceiling including carriage of material in all leads and lifts. In cement mortar 1:3(1cement:3sand).

20mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts:- In cement mortar 1:6 (1cement: 6 sand).

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts:-

In cement mortar 1:3 (1cement: 3 sand)

In cement mortar 1:6 (1cement: 6 sand)

Extra over item No. 61.01 above for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.

Distempering with oil bound distemper of approved brand and manufacture and of required shade on undecorated ceiling surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on un decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface aftr thoroughly brushing the surface free from mortar drops, dust, loose materials and other forein matters sand papered smooth to give final matter finish to the surfacae complete including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equrlied on undecorated wall surface to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 cement : 3 sand :6graded stone aggregate20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry bricks/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22cm in cement mortar 1:6(1cement:6sand) and inside plastering with cement mortar 1:3(1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10(1cement:5sand:10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4(1cement:2sand:4graded stone aggregate of 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I. pipes and filling the same with cement concrete 1:3:6(1cement:3sand:6graded stone aggrregate 20mm and down gauge) after the conduit/G.I. pipe is laid (excluding the cost of conduit/G.I. pipe) including carriage fo material in all leads and lifts.

Brick edging brick laid on edge to plinth protection with bricks including grouting with cement mortar 1:4(1cement:4sand) with brick size 22.9cmx11.2cmx7 cm. including carriage of material in all leads and lifts.

Demolition above G.L. upto floor all level includig disposal of unserviceable materials within 20 meters lead and including cutting the necessary re-inforcement and separating out from including carriage of material in all leads and lifts:- R.C.C work.

Providing and fixing to wall ceiling and floor Polyethene- Aluminium- Polyethene(PE-AL-PE) composit pressure pipes confirming to IS-15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temprature up to 80 degree C, including all special fittings of .composite material (engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc; with clamps at 1.0 metre spacing. This includes testing of joints complete as per direction of the Engineer-In- charge, including carriage of material in all leads and lifts.

(16mm OD) Outer dia.

(20mm OD) Outer dia.

Providing and laying in trenches galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification 20 mm nominal bore.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G. I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:- 1000 litres capacity

Providing and fixing sand cast/cast iron spun spigot and socket waste and ventilating pipes (lead caulked joints to be measured and paid for separately) confirming to BIS specification including carriage of material in all leads and lifts. 100 mm nominal bore.

Providing and fixing cast iron cowl confirming to BIS specification including carriage of material in all leads and lifts.100mm nominal size.

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-

15mm nominal size

20mm nominal size.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC clamp ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC door bend with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors complete including carriage of material in all leads and lifts:-

110mm x 75mm.

110mm x 90mm.

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10.00 litres capacity (full flush) European standred control low level PVC flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon,15mm nominal size PVC ball valve with polythene float, with push button,coulping for connection with inlet and outlet and overflow pipes40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts,

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Circular 560mm x 400mm (oval typer under counter).

Providing and fixing vitreous china bowl pettern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately including carriage of material in all leads and lifts:- Flat back type of size 430mm x 260mm X 350mm..

Providing and fixing divisional plate for urinals 600mmx300mm vitreous china confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing PTMT coloured / white automatic flushing cistern with a pair of PVC / C. I. or M. S. brackets complete with fittings including PVC syphonic appratus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measurerd and paid for separartely) including carriage of material in all leads and lifts:- 10 litres net capacity

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing chromium plated stainless steel grating 100mm confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs wth C.P. brass screws including carriage of material in all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.I. brass screws, including carriage of material in all leads and lifts. 600x20mm.

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass pillar tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing brass angle valve15mm without nuts & pipe confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing G.I./M.I. unions of following size s(where not included in the item) including carriage of material in all leads and lifts confirming to BIS specification:-

15mm nominal size

20mm nominal size.

Providing and fixing PVC connection pipe with brass union 300/450 mm length and 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5 (1cement:5sand) and water tight C.I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg) square mouth trap 100mmx100mm size 'P' type including carriage of material in all leads and lifts confirming to BIS specification.

Providing and laying (to level or slopes) and jointing reinforced concrete(light duty) non-pressure pipes 1st class NP-2 or P of the following internal diameter with collar and butt ends prepared for collar joints including testing of joints 150mm dia including carriage of material in all leads and lifts.

Constructing manhole with RCC top slab in 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:- Inside size 800mmx800mm and500mm deep with steel S.F.R.C frame cover (medium (duty) 560mm internal diameters total weight of cover and frame not to be less than 173 kg. (weight of cover 70 kg. and weight of frame 103 kg.) with 230mm jthick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement:3sand).

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (Seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:- Ordinary closet.

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C pan) size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separartely) including carriage of material in all leads and lifts:- Orissa Pattern.

Provding and fixing C. P. brarss flush pipe / spreaders for urinal with fitting such as unions, clamps etc. (all in C. P. Brass) including cutting holes and making good the same including carriage of material in all leads and lifts:-

15mm nominal bore.

Providing and fixing vireous China pedestal for wash basin complete recessed at the back forj the rreception of pipes and fittings including carriage of material in all leads and lifts.

Providing and fixing C.P. Brass concealed stop cock (confirming to BIS specification) including carriage of material in all leads and lifts:- 15 mm dia.

Providing and fixing PTMT jet spray of approved quality and colout with one metre tube including carriage of material in all leads and lifts.

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of material in all leads and lifts:- 110 mm dia.

Cutting holes through existing brick/stone walls including making good the same in cement mortar 1:6(1cement:6sand) per cm depth of cutting: Holes up to and including 400 mm square centimeter in area including carriage of material in all leads and lifts.

Providing 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes/ septic tank with 200mmx200mmx100mm cement concrete 1:3:6(1cement:3 sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Supplying and fixing cast iron cover with frame for manhole of internal diamensions 450x610mm rectangular C.I cover (light duty) single seal pattern-I, the weight of cover and frame to be not less than 38kg. (Weight of cover 23kg and weight of frame 15kg), including carriage of material in all leads and lifts.

Surinder Kumar