C/O Parking along Gamru ground Ward No.5. Sub Head - C/O R.C.C counter fort R/wall

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick Work.& Jumper Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Foundation, footings basis of columns etc. and mass concrete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work in:vertical surfacesand breaks in floors and walls for any thickness as directed by the engineer incharge including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Floors etc. above 200mm. in thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Edges of slabs and breaks in floors and walls: Above 20 cm. wide including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand : 3 graded stone aggregate 20 mm nominal size and curing complete excluding cost of form work. Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand : 3 graded stone aggregate 20 mmnominal size and curing complete excluding cost of form work.Walls including attached buttresses, pilasters and their caps and bases string courses etc. upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Suspended Floor roofs, landing and shelves and their support alconies,beams, girders, bressumers and cantilever upto floor twolevelincluding carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :Tor Steel including carriage of material in all leads and lift and direction of Engineer-in-charge.

Stone filling behind retaining walls including carriage of material in all leads and lift and direction of Engineer-in-charge.

Excavation in earth work and banking in 20cm. layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto a lead of 20 metres and lift upto 1.50 metres: Pick Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing Weep hole in brick masonary/stone/Plain reinforced concrete abutment wing wall with 75mm dia. PVC pipe extended the full width of the structure with slope including carriage of material in al kind of leads lifts and other incidentals including carriage of material in all leads and lift and direction of Engineer-in-charge.

Neeraj

Vinod Kumar

Ram Pal