Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-Finance | L1 | Accepted-Finance Single bidder, due to the urgency of the work it has been accepted |
Tender Value
₹3.6 L
EMD Value
₹7,200
Closing Date
6 Jul 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE Civil
Room No 703 BSNL Bhavan Hyderabad
Dismantling and erection of 3 Nos 12Mtr Marr masts on terrace of building at Rajeev Chowk, Narayankhed in Medak BA
2022_BSNL_120337_1
NIT No 18 BCDH-I Hyd
Open Tender
Civil Works - Buildings
Item Rate
30 days
NaryanKhed
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹7,200
16 Jul 2022
25 Jun 2022
7 Jul 2022
25 Jun 2022
6 Jul 2022
25 Jun 2022
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
Columns, Pillars, Piers, Abutments, Posts and Struts.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars.
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. .
Providing and fixing bolts including nuts and washers complete.
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work.
Rebate for taking away of reinforcement steel obtained from dismantling of RCC beams
Carrying of RCC/ dismantled materials manually by head load from second floor terrace to Ground floor and dumping at ground floor for further disposal as directed by Engineer-in-Charge.
Carting of building rubbish / malba / similar unserviceable, dismantled, brick or concrete by mechanical means, through private carrier including lifting, loading, transporting and unloading beyond 50 m initial lead,or dumping ground as decided by the Engineer-in-charge, for all leads including all lifts involved.
Providing and fixing anchor fastners (expansion fastners) of approved quality including drilling in RCC and fixing complete.
a) 16mm dia - 100mm long
b) 12mm dia - 100mm long
Extra for galvanising (of thickness not less than 120 microns) on M.S angles , flats, gussets plates, bolts, nuts and other fastners.
Erection of 12.0 M Marr Masts (departmental material) on terrace with supporting structure as per the design and drawing and as directed by the engineer-in-Charge. Cost includes lifting of marr masts from ground floor to Terrace (Anchor fasterners and bolt & nuts will be paid separately)
Dismantling/dismembering of 12.0m roof top Marr mast towers and stacking the marr segments of each length 3.00m in good condition etc all complete as directed by engineer-In-Charge.
Transportation / Shifting of 3nos of 12.0 M Marr Masts of having segments in length of 3.0m each from terrace (G+2) to new site approx lead of 1.0km distance to work site. Cost includes lifting , loading, transportation,unloading and lifting to terrace at work site and as directed by Engineer-In Charge.
Providing and supplying heavy duty injection adhesive for fixing threaded bolts in wet/dry conditions HILTI RE500 for dia upto 40mm of HILTI India Pvt. Ltd. The system to be made of two foils consisting of resin and hardener foil pack. The system can be used for fixing threaded bolts viz HAS-E-M8 to 39 rods. The cost inclusive of material, epoxy fasteners, drilling holes in concrete etc., complete as directed by Engineer-In Charge.
16mm dia epoxy based anchor fasteners
Drilling holes of 16mm dia in RCC slab/beam upto a depth 120 mm and embedding 12mm dia TMT bars of grade Fe 500D in the hole including grouting the hole with FOSROCK LOKFIX chemical or approved equivalent to anchor reinforcement excluding the cost of reinforcement as per direction of Engineer-in-Charge. ( the work shall be carried out as per manufactures specification through the Applicator approved by the manufacturer)
P/Fixing of 8 mm dia GI guyrope including fixing with MS 'U' clamps and tightening arrangement with turn buckle etc., complete as directed by the Engineer-in-Charge
Painting one or more coats with high gloss synthetic enamel paint of approved brand and colour (International white and orange) as per recommendation of international Civil Aviation rules in roof top MARR masts of Galvanised structural steel . (NOTE: Rate includes painting of 3 nos MARR masts, platforms, antenna mount, vertical tray/gantry,, Wave guiderack, feeder cable rack, rails, lightening arrester, nuts and bolts, posts etc. as one job)
a) 12.00 metres high MARR Masts
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .