SPECIAL REPAIR OF OR TOILET BLOCK BLDG NO 89/D OTM, DUTY CLK ROOM NEAR LA SECTION ( DHQ 3) AT RECORDS KRC AND CERTAIN MINOR WORKS AT RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Supply & fixing 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side laps, fixed with coach screws/'L' or 'J' type hook or cranked hook/bolts and washers as in roofs, walls etc with grade of zinc coating 120gm per Sqm both sides complete all as specified and directed.

Supply & fixing 0.63mm thick Plain, galvanised, mild steel sheeting, as in roof, ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 120gm per Sqm both sides complete all as specified and directed.

Supply & fixing Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete as specified and directed

Supply & fixing Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete aa as specified and directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Dismantling of ceiling board (fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

Supply & fixing of 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/ Aluminium frame work with screws as in ceiling complete all as specified and directed.

Supply & fixing of 4 mm thick E-board classic for insulation and acoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface complete all as specified and directed.

Supply & fixing of powder coated aluminium snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.06 sqm but n.exc. 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

Material & Labour coloured Glazed ceramic tiles 350x250x7 mm thick as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

Material & labour for Vitrified ceramic tiles 10mm thick light shade ( square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Material & labour for Vitrified ceramic tiles 10mm thick light shade ( square/rectangular) polished, area of each tile not exceeding 0.36 sqm as in vertical surface such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 grade with grey cement and pigment set, jointed over & including 40 mm thick fine sand cushion including sides are filled with PCC 1:2:4 type B1 (using 20mm graded crushed stone agg.) complete all as specified and directed.

Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Material & Labour for precast cement concrete block masonery with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded crushed stone agg) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for 10mm thick rendering in CM 1:4 on concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. .

Material & labour for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as pecified and directed.

Material & labour for complete removal of existing treatment of walls, applying a layer of wall care putty 3mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coat of oil bound distemper over a coat of primer complete all as pecified and directed.

Material & labour for preparing new plastered or unplastered surfaces of walls, applying a layer of wall care putty 3mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coats of oil bound distemper over a coat of primer complete all as pecified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels complete all as specified and directed.

Material & Labour for cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, sub base complete all as specified and directed.

Material & Labour for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone agg) as in road path, hard standing etc laid in panels with and including necessary forwork as required, and finishing the surfaces of concrete by making impression, whilst the concrete is green complete all as specified and directed.

Material & Labour for cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers or 9 mm BWP commercial ply complete all as specified and directed.

Supply & Fixing of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified & directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1.of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

S&F aluminium powder coated door with shutter and frame of aluminium section sliding type as per following specifications with and including round type aluminium handle, tower bolts, hinges, panes etc and as directed at site. Make Jindal or its equivalent approved make :- (a) DOOR FRAME : 100X44X1.6mm section for complete frame. (b) DOOR SHUTTER : Top & bottom rail of 100x44x1.6 mm, middle rail of 83 x 44 x 1.6mm, both styles of 83 x 44 x 1.6 mm size shall be used. (c) GLASS PANE : 5mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc. (d) Jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as 100mm long 03 Nos. hinges, aluminium handles , aluminium tower bolts ,and mortice lock 6 Levers etc complete all as specified and directed

Supply & Fixing aluminium partition powder coated of frame of aluminium section 44.45 X 44.45 X 1.6mm etc and 5 mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc.and as directed at site including taking down olduserviceable wooden partition complete all as specified.

Supply & Fixing 150 mm size Extruded aluminium handle fabricated type anodised complete all as specified and directed.

Supply & Fixing 125mm size Extruded aluminium handle fabricated type anodised complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 200mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in lintel upto 1.5m clear span, cills, steps, seismic and other similar works , parapets and railing upto 60cm in height, coping , hold fast, bed block, etc, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Supply & Fixing mild steel work as hold fasts, bands, straps, supports or stays for pipes eaves gutter including bolts if required, hooks (stay), clamps and similar small articles, conforming toFe 310-0 or Fe 410-0 complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing including cleaning for refixing or removal from site complete all as specified and directed.

All as item No 50 here in before but 20mm dia steel tubing

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply & Fixing coloured rotational moulded polythene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of complete all as specified and directed.

Supply & Fixing in repair 15mm dia bib tap cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply and fixing stop valve 15 mm dia cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends ends for iron pipe or for union complete all as specified .

Supply & Fixing vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed.

Supply & Fixing 10 ltr capacity PVC valve less, Symphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection fixed in repair complete all as specified.

Supply and fixing flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern ccomplete all as specified and directed.

Supply & Fixing PVC connection 15mm size with PTMT nuts of length 45 cm complete all as specified and directed.

Supply & Fixing in repair Grating dome 125mm dia with waste hole of PTMT ( Minimum weight 40gms) complete all as specified and directed.

Supply & Fixing 100 mm bore cast iron pipes with spigot and socket ends centrifugally cast class A laid in trenches complete all as specified & directed.

Supply and fixing cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4) , diameter of outlet 75mm complete all as specified.

Supply & Fixing 50 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified & directed.

Supply & Fixing 100 mm dia cast iron traps 'P' or 'S' complete all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc. or for shafts wells, cesspits, manholes etc. n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Material & Labour Salt Glazed stone ware Grade 'A' drain pipes laid in trenches, jointed and tested, 150mm internal dia of pipe complete all as specified

Material & labour for cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Material and Labour Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M/s RN Kharwar & Sons

NK CONSTRUCTION