Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC MORKANDA ROAD BALNATH NURANI TOWER 2ND FLOOR BLOCK NO 301 JAMNAGAR 361001 | JAMNAGAR | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹8.3 L+₹40,663 (5.14%)Rejected-Finance 30 DIGVIJAY PLOT RAVAL NIVAS JAMNAGAR GUJARAT 361 005 | JAMNAGAR | JAMNAGAR | GUJARAT | 361005 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹8.9 L+₹96,892 (12.2%)Rejected-Finance | L3 | Rejected-Finance NOT L1 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
21 Oct 2020, 6:00 pmClosed
AGE I A Jamnagar
INFANTRY LINES JAMNAGAR
REPAIR REPLACEMENT TO CERTAIN DAMAGED MASONARY WALL FLOORS ROOF SHEET FALSE CEILING INCL FRAME WORKS CHAJJAS SUNSHADE PLINTHS ETC IN CERTAIN BLDGS AT BG LINES AND MES COLONY JAMNAGAR
2020_MES_380690_1
8723
Open Tender
Civil Works
Item Wise
120 days
Jamnagar
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
₹18,000
Yes
5 Nov 2020
25 Sept 2020
22 Oct 2020
2 Oct 2020
21 Oct 2020
2 Oct 2020
Amount
Dismantling plain or corrugated sheeting, any gauge, thickness all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.
S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type hook with coach screws and washers in roof, walls etc. complete all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type cranked hook and washers in roof, walls etc. complete all as specified and as directed.
S&F 6mm thick asbestos cement, one piece plain angular ridge in roofs, walls etc. fixed with L-type or J-type cranked hook and washers in roof, walls etc. complete all as specified and as directed.
Dismantling Mild Steel works of any description and all as specified.
S&F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in Fe410-W (Gde-E - 250) quality A. complete all as specified and as directed.
M&L preparation of newly steel surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided for, complete all as specified and as directed.
M&L 75mm thick PCC type C-2, 1:3:6 (40mm graded stone aggregate) as in path, plinth protection, etc., complete all as specified and as directed.
M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement plaster 1:4 all as specified and as directed.
Demolition of precast concrete block walling built in cement mortar all as specified.
M&L Pre cast cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) block masonary exc 10 cm in width and setting in CM 1:6 all as specified and directed.
M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:4 incl finished even and smooth w/o using extra cement all as specified.
M&L Preparation of plastered surfaces of walls and applying two coats of cement base paint complete all as specified.
Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of chajjas/sunshade etc by using chesel/hammer .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplementary bars if required, either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface complete all as specified and directed. (Make of Epoxy bonding agent / polymer : Dr fixit / Prime seal / Fosroc).
Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified.
S&F GI frame work of size 605 x 605mm, for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long and providing 4mm thick Non asbestos fiber cement building boards (E-boards) fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as directed by Engineer in charge. (Make : V board / Bhutan board / Archid board)
Ravi enterprise
SIBS CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .