Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC PLOT NO 3 DIVINE SCHOOL ROAD NEAR BJP KARYALAY PORBANDAR KHAMBHALIYA HIGHWAY BOKHIRA PORBANDAR 360 579 | PORBANDAR | GUJARAT | 360579 | L1 | Accepted-AOC The lowest bid has been accepted | |
| 2 | L2₹28.4 L+₹52,630 (1.89%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹29.0 L+₹1.2 L (4.23%)Rejected-Finance PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹29.5 L+₹1.6 L (5.78%)Rejected-Finance JAVERI BUNGALOW AREA KAVERI HOTEL LINE NH PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹29.5 L+₹1.6 L (5.86%)Rejected-Finance KUCHHADI VADI VISTAR PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
8 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Yogender Singh
GE Navy Porbandar Tija Mile Porbandar
E-TENDER FOR CERTAIN B/R REPAIRS AT INS SARDAR PATEL, KUCHADI AREA, MES COMPLEX AND NAVAL AIR ENCLAVE UNDER GE NAVY PORBANDAR
2022_MES_558680_1
9150/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Garrison Engineer Navy
₹58,000
Yes
18 Nov 2022
19 Oct 2022
10 Nov 2022
19 Oct 2022
8 Nov 2022
2 Nov 2022
19 Oct 2022 - 1 Nov 2022
Amount
Demolition of reinforced cement concrete in ground floor and paving in any position below or above ground level complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing, rubbish off the premises complete all as specified and directed.
Chequered cement concrete coloured tiles (grey cement mixed with pigment) 20cmx20cmx25mm thick set over & including 20 mm thick bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified.
Plain Cement concrete (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in kerb stone including all mouldings set in cement mortar covet fillet in roof and 1:6 complete all as specified and as directed.
Vitrified Ceramic tiles 10 mm thick, Light shade coloured (square/ rectangular) (double charged) area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured epoxy grout to match , over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry beded in any mortor complete all as specified and as directed.
Granite 20mm thick machine cut, bedded andjointed as in cills, jambs, steps and the like with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing , etc with 15mm thick screed in cement mortar (1:4) complete all as specified and as directed.
20mm thick Granite machine cut, in skirting/dado door window sill, jambs etc laid over cement screed (1:3) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
75mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.
25mm thick PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in plinth protection, path etc. finishing the surface even and smooth without using extra cement complete all as specified.
Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete articles and precast concrete block walling etc. Complete all as specified and directed.
Stone masonry walling or squred walling in cm 1:6, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.
Stone masonry walling or squred walling in cm 1:6, brought upto courses but except stone complete all as specified and directed (Serviceable stones retrieved from item No. 11 will be reused).
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Rendering 10 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all specified and directed.
40 mm thick pre-cast cement concrete (1:2:4 type B0 using 12.5 mm graded stone aggregate) jallies set and jointed in CM 1:4 including necessary scafolding & reinforcement complete all as specified & directed.
12mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed.
Taking down chowkat or frames exc 1.5 Sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.
Taking down chowkat or frames n.exc 1.5 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.
Taking down Shutters only n exc 2 sq. m each and removing complete all as specified and as directed.
Taking down Shutters only exc 2 sq. m each and removing complete all as specified and as directed.
Factory made 35mm thick, 2nd class hard wood , plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match all as specified and directed.
Plain solid, straight chowkats and frames of second class hard wood wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed.
300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
150mm long (Length of Bolt in mm) Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and directed.
150mm (Size of Handle in mm) Aluminium handles, cast type, anodised all as specified and as directed.
100mm Butt hinges (Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified and as directed.
75mm Butt hinges (Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified and as directed.
Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and as directed.
75mm aluminium handle, cast type anodised complete all as specified and as directed.
Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws and Favicol / jointing material to timber frame work fixed in repair / replacement complete all as specified and as directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified and directed
All as per description of item No. 34.00 above but wood grainprinted PVC sheet instead of Plain colour PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading etc. complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
Taking down old u/s Aluminium Window / door sliding section removing from sliding track including with all glass / wire mesh fitting complete all as specified and as directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.
Aluminium Partition of standard section 63.5 x 38.1 x 1.31 mm wall thickness including 5mm thick glass sheet panes, necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws complete all as specified and directed by Engineer in Charge.
Aluminium anodised grill (Grill No. 20) of make 'DECO GRILL' or equivalent approved make as approved by GE in writing including making opening for handle & fittings, fixed with and including aluminium (anodised) channel section 38mm x 12mm x 1.30mm or F Section complete all as specified and directed.
Solar control film 25 micron reflective type pasted to glass panes as per instructions of manufacturers exc 1.5 sqm complete all as specified and as directed.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
Aluminium Alloy wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified.
4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.
Double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
Mortice aluminium 2 lever lock, vertical type, size 100 mm fixed in repair / replacement complete all as specified and directed.
Preparation of new or previously untreated surface of wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wooden primer complete all specified and directed.
Dismantling structural steel work as in doors, gates but excluding framed structures complete all as specified.
Framed work ( Fe 410 -W(Gde-E- 250) quality-A)- as in doors or gates of angle or other section with gusset plates, rails, posts, braces, rafters, purlins etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing as in repair complete complete all as specified and directed by Engineer in Charge.
Preparation of new steel surfaces of any description and applying two coats of epoxy paint over a coat of red oxide primer complete all as specified and as directed.
Mild steel, 1.25mm plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up mitred angles complete all as specified and directed.
Taking down old roof treatment of any description including plaster, cement concrete and removing old material outside MD land exc 1 Km and n.exc 5 Km complete all as specified and as directed.
10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight incl WPC , finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Polymeric membrane will be measured and paid separately)
Supply only integral water proofing compound complete all as specified.
Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing, complete all as specified and as directed. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane cover including testing on completion complete all as specified and directed.
High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
RAJ ENTERPRISE
M/S. P.M GODHANIYA
OM ENTERPRISE
JAY BHARAT METAL SUPPLIERS
SHREEJI ENTERPRISE
shree chamunda enterprise
AADESH CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .