RequiredExperience with Government
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Buses ( 870 pieces ) Technical Specifications * As per GeM Category Specification 1/7 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Vehicle Seating Capacity (Nos.) 33 30.0 - 60.0 Or higher Type of Fuel Diesel Diesel Vehicle Emission Complaince BS-IV * Colour of the Vehicle - * Vehicle Colour Type Solid Solid
RequiredMetallic Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) 10.84 Any applicable numeric value Top Speed (Kmph) 80 * Acceleration (0-100KmPH) (sec) 26.6 * Gradeability of Vehicle (Degree) - * Air Conditioning Without Without Engine BHP@rpm (Hp@rpm) 135hp@2600rpm 125bhp2400rpm
Required128bhp2400rpm
Required135hp2600rpm
Required141bhp3000rpm
Required141hp3000rpm Engine Torque Max@rpm (N- m@rpm) 450Nm @1200- 1800rpm 360nm1500-2000rpm
Required4001300-1600
Required430nm1350-1800rpm
Required450nm1200-1800rpm No. of Cylinder in Engine (Nos.) 4 More than 4.0 Or higher Type of Vehicle Body Chassis Frame Chassis Frame No. of Doors (Nos.) 1 * Fuel Tank Capacity (Ltrs.) 100 * Length of Vehicle Body (mm) 8921 More than 8520.0 Or higher Width of Vehicle Body (mm) 2345 More than 2150.0 Or higher Height of Vehicle Body (mm) 3115 More than 2910.0 Or higher Ground Clearance (mm) 165 More than 165.0 Or higher Wheel Base (mm) 4320 More than 4200.0 Or higher 2/7 Boot Space Availability Yes Yes
RequiredNo Boot Space (if Yes) (Ltrs.) 0 * Kerb Weight (Kg) 5698 5370.0
Required5140.0
Required5698.0 Gross Vehicle Weight (Kg) 8850 * Size Of Tyre (mm) - * Size of Wheel (mm) - * Vehicle Transmission System Manual Manual No. of Speed Forward Gears (Nos.) 5 More than 5.0 Or higher Type of Wheel drive Two Wheel Drive (Rear Wheel) Two Wheel Drive (Rear Wheel) Drive Axle Rear Rear Type of Steering Power Power Turning Radius (mm) 7600 Less than 7600.0 Or lower Vehicle Brake ABS Fitted Yes Yes Front Vehicle Brake Drum Brake * Rear Vehicle Brake Drum Brake * Vehicle Air Intake System TurboCharged TurboCharged Speed Governor with valid certification Yes * Performance Parameters Low Fuel warning Light Yes * Battery Warranty (Month) 12 12
Required24
Required36
Required48
Required60 Or higher Warranty Time (Month) 12 12
Required24
Required36
Required48
Required60 Or higher Unlimited Warranty Distance (Km)during warranty period yes yes Warranty Distance (Km) If not Unlimited during warranty period 100000 * No. Of Free Service 3 * Transportation Charges including transient insurance and temporary registration (Rs/Km) 13.5 Any applicable text(s) 3/7 Certification Vehicle Certification ARAI/VRDE/ICAT No AAMN0140 F01 aagn0260052001_v01
Requiredaagn_0273_153_0008
Requiredaamn0140f01 Conformity to GSR 287(E) Yes Yes Constructional Parameters Body Specification - * Hat type tube diameter 40 * Hat type tube diameter/or other frame( thickness) 40 * Base Frame Structure ISMC/for Monocoque yes * Exterior Panel thickness of side body and roof/for Monocoque 1 * Interior Panel thickness of side body and roof for Monocoque 6 * Flooring Made Out from ISI Marked 12 mm thick BWR grade plywood covered with vinyle/Aluminium sheet Yes * Seating Plan Yes * Doors Yes * Glasses Yes * Top portion of fixed glass window & bottom portion in two halves in sliding pattern Yes * Passenger Compartment - Roof light No * Over Head Storage cabinet/Railing
RequiredYes * Hand Rail
RequiredHanging Hook
RequiredYes * Day and Night View Mirror No * Fire Extingusher Yes * BIS marked Pneumatic Tyres and tubes for both front and rear Yes Yes Driver Airbag No * 4/7 Exhaust Fan No * Central Locking No * First Aid Box
RequiredSwiveling Fan
Requiredetc Yes * Other fitments:- Electric bell and Siren No * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
