RENOVATION AND MODERNIZATION OF K.L.B.M.C. STRUCTURES AT CH: 38550 m TO CH: 51005 m (PACKAGE-10) & RENOVATION AND MODERNIZATION OF BRANCH CANAL B3 AT CH. 0.00 TO CH. 5.415 (Package-11)

BILL OF QUANTITIES

BILL OF QUANTITIES

NAME OF WORK: RENOVATION AND MODERNIZATION OF K.L.B.M.C. STRUCTURES AT CH: 38550 m TO CH:

51005 m (PACKAGE -10) & RENOVATION AND MODERNIZATION OF BRANCH CANAL B3 AT CH. 0.00 TO CH.

5.415 (Package-11)

Dismentalling the existing stone masonry including

sorting out and stacking the useful materials and

removing the debries and making good the damage etc.

complete as directed.

Dismentalling the R.C.C.work & disposing off the stuff

including stacking of the useful materials etc. complete

as directed. a)Light reinforcement.(Main bar upto

Dismentalling the existing foundation concrete

including disposing the dismentalled stuff including

3 sorting out and stacking the useful materials and 1030.54 Cum. 1165.20

removing the debries and making good the damage etc.

complete as directed.(b) In cement concrete.

Dismentalling the existing R.C.C.pipes of the following

diameter including sorting out and stacking of the

4 useful materials including refilling the trenches etc. 630.00 Rmt 1281.70

complete as directed. (NP-2 pipes).(d) 1000 mm to

Excavation for foundation in all sorts of soil including

yelloow, sandy,gravelly soil,soft & Hard murrum etc.

Dry Condition Including depositing the excavated stuff

in uniform layers in banks or as directed etc. complete

for lead up to 1.0 km.and all lift (by machinery) (A)

Above Water Table

Excavation for foundation in soft rock including

depositing the excavated stuff as and where directed

etc. complete for lead upto 1.0 Km and all lifts.(By

machinary). (b) Below water table

Excavation for foundation in all sorts of soil including

yellow, sandy, gravelly soil, soft & hard murrum, etc.

7 dry condition including depositing the excavated stuff 13315.38 Cum. 86.10

in uniform layers in banks or as directed etc. complete

for lead uo to 1.0 Km and all lifts. (By machinery)

Providing and laying plain/ reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead and

lift.(Baching Plant Based, Including dewatering). Raft,

Bottom slab of barel, footing of columns, piers,

abutment and bottom slab of sump etc.(i) M-15 grade.

Earthwork in embankment using soil, soft & hard

murrum excavated from approved borrow area/village

9 tanks etc.including breaking clods, dressing to the 30524.30 Cum. 118.10

design section with lead up to 5.0 kilometer and all

lifts.(By poclane machinary)

Providing and fixing in position 110 mm dia PVC pipe

10 weep holes in abutment, wing wall, and laying training 989.85 Rmt 263.70

Providing and placing in position reinforcement bars

including cutting, bending welding, joints where

necessary, hooking etc. complete as per drawing for all

lead and lifts.(b) TMT - Fe

Providing and fixing in position PVC heavy duty water

stops in barrels, trough, and wing wall with 25 mm

wide expension joint as shown in drawing including

filling the joints with asphalt pad or bitumins or cork

board of approved quality.(B) 300mm wide PVC water

12A (A) 225 mm wide PVC water stop 155.20 Rmt 384.90

Providing panel pitching having panels of 3.0 m x

min cement concrete 1:3:6, 0.30 wide and 0.60m deep

13 around panels including filling the panels with dry 3135.40 Sqmt 684.60

rubble 0.45 m thick and filling the voids with earth as

Providing and laying plain/ reinforced Nominal Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

14 batching, mixing, transporting, placing, vibrating, 234.97 Cum. 3899.10

smooth finishing, curing etc. complete for all lead and

lift.(Manually With Conventional Mixer, Excluding

dewatering).Foundation.(ii) M-10 grade.(1:3:6)

Earthwork/Back filling with selected earth including

15 watering ramming,Compaction with pnuematic 3952.94 Cum. 144.50

temping with all lead and all lift etc complete

Providing and laying plain/reinforced cement concrete

lining of M 15 (MSA 20 mm) in bed, side slopes and

curvature including batching, mixing, transporting,

placing, vibrating, smooth finishing, curing including

dewatering where required. (MACHINERY BASED by

"BATCH MIX PLANT & TRANSIT MIXER" - WITHOUT

PAVER MEMBRANE CURING) 20 cm thick lining in Bed

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead and

lift.(Baching Plant Based, Including dewatering) ( B )

Raft, Bottom, slab of barrel, footing of columns, piers,

abutments and bottom slab. ( iii ) M-25 grade

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

18 smooth finishing, curing etc. complete for all lead and 4522.63 Cum. 5753.60

lift.(Baching Plant Based, Including dewatering) (D)

Walls of barrels, brestwall, staunching rings, pedestals

of bearing, stoplog piers, well staining, transitionwall,

etc. ( iii ) M-25 grade

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead and

lift.(Baching Plant Based, Including dewatering) Piers,

abutment, wingwalls, headwall, returnwall etc. (iv) M

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

20 smooth finishing, curing etc. complete for all lead and 1684.04 Cum. 5206.30

lift.(Baching Plant Based, Including dewatering) (E)

Roadway slab, approach slab, chute floor slab, kerb,

pier cap, abutment cap, hoisting platform, top slab of

barrel etc. ( iii ) M-25 grade.

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

21 smooth finishing, curing etc. complete for all lead and 254.78 Cum. 4685.10

lift.(Baching Plant Based, Including dewatering) (E)

Roadway slab, approach slab, chute floor slab, kerb,

pier cap, abutment cap, hoisting platform, top slab of

barrel etc. ( i ) M-15 grade.

Providing and laying plain/reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead and

lift.(Baching Plant Based, Including

dewatering)(C)Piers, abutment, ingwalls, headwall,

return wall etc. ( ii ) M-15 grade.

Providing and casting in situ ordinarycement concrete

M-200 for average 75 mm thick wearing coat laid as

directed including tamping ,vibrating, finishing, curing

and filling in joints with bitumen complete.

Constructing 1 m. wide steps in brick/ stone masonry

in c.m. 1 :5 dam slopes as per approved drawing

including excavation etc. complete for zero leads and

lifts. (a) Using bricks works.

Excavation of canal/drains in all sorts of soils

(including wet and slushy condition of soil) including

depositing the excavated stuff in uniform layers in

canal banks or in spoil banks or as and where directed

including dressing the canal section upto lead of

meter and all lift including clearing the site etc.

complete (By machinery for canal/drain maintanance)

(up to 1.5 cumecs capacity of canal/drain)

Providing & fixing in position sign boards of standard

size 0.45mx0.30m with M.S.angle 40mmx40 mmx6mm

26 with 3mm thick iron plate fixed in 1:5:10 prop. 12.00 Nos 1400.10

Concrete block size 40cmx40cmx75cm including

radium paint on both side etc. complete.

Providing videography on the ocassion of function or

for on going construction work including dubbing,

titeling etc. complete including cost of cassette/CD.(b)

Up to 4.00 hours

Providing inspection steps while lining along canal

slopes as per drawing etc. Completeas dirercted.

Supplying and laying trap rubble stone of 10 to 30 kg.

in weight for toe and core filling including conveying

29 and stacking to required line level, slope section 519.00 Cum. 1067.00

including all leads and lifts, conveying materials from

stacks and laying etc. complete.

Providing and filling sand below R.C.C. raft in layers

including raming and watering complete.

Providing inverted filter of 8 cm. sand and 8 cm. gravel

below/ behind wall/ pitching including laying to

correct slopes after necessary trimming of earth work

Providing G.I. 100mm diameter water spouts including

necessary iron gratings as per drawings.

Suppliying and Spreading the graded stone aggregate

for rolling and W.B.M. including filling the interstices

to required camber and gradient (excluding spreading

of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

Providing and filling the polysulphide joint selent of

the approved make in the expansion and contraction

joints in the c.c. lining including clearing the joints with

Finishing wall with water proofing cement paint on

wall surfaces (Two coats) to give an approved brand

35 and manufacture and of reqd. shape even shade after 2534.76 Sqmt 58.07

thoroughly brushing the surface to remove all dirt and

remains of loose powdered materials.

Providing and fixing in position Sign board of standard

size 1.20m x 0.90m with M.S. angle 40mm x 40mm x

6mm with 3mm thick iron plate in 1:5:10 proportion

concrete block size 40cm x 40cm x 75 cm including

painting existing data on the board etc. complete as

Providing and Erecting a "W" metal beam CRASH

BARRIER comprising of 3 mm thick corrugated sheet

metal beam rail, 70 cm above road/ground level fixed

on ISMC series channel vertical post, 150 x 75 x 5 mm

space 2.00 m centre to centre 1.80 m high 1.10 m

below ground/road level fixing at site shall be in C.C. M

- 20 block of size 50 x 50 x 100 cms for each post. All

steel parts and fitments to be galvanized by hot dip

process, all fitting to conform IS : 1367 and IS :

metal beam rail to be fixed on the vertical post with a

spacer of section 150 x 75 x 5 mm 3.30 m long

complete as per MORTH Clause 810. Rates including

providing and fixing 3 mm thick ACM type reflactor

100 mm wide, type4, class-B, High inensity grade

sheeting between two 'W' metal beam throught and

reflactive unit at the top of vertical post as per IRC :

- 2012 etc. complete as per detailed drawing and

directed by engineer-in-charge. (Metal beam crash

barrier for approch)

Compaction of selected soil/hardmurrum/soft

murrum in even thickness of 15 to 20 cms including

watering rolling of suitable capacity etc. complete as

Providing gauge plate of following size of material fibre

glass reinforced plastic with engraved bands width and

39 figures with necessary clits and fastenersand fixing the 25.00 Nos 8265.94

same at the site of work etc complete as directed For

0.30 mt. x 1.0 mt. gauge patti.

Providing water proof cement plaster 20mm thick in

cement mortar 1:3 proportion with one kilogram of

40 water proofing material per bag (50 Kg) of cement 5600.00 Sqmt 300.50

including cleaning the surface, neat finishing, curing

scaffolding etc. complete for all leads and lifts.

Desilting of various structure of canals and distribution

41 sysytem including depositing the same as directed 720.00 Cum. 233.00

with all leads and lift.

Dismetalling the C.C lining including disposing off the

42 dismentalled materials as directed etc. complete. 11425.97 Sqmt 29.10

Providing and laying plain/ reinforced Design Mix

cement concrete of various grade with cement, sand

and coarse aggregates including centering, shuttering,

43 batching, mixing, transporting, placing, vibrating, 353.29 cum 5228.00

smooth finishing, curing etc. complete for all lead and

lift.(Batching Plant Based, Excluding dewatering)

Walls of barrels, brestwall, staunching rings, pedestals

of bearing, stoplog piers, well staining, transitionwall,

Providing and laying uncoarsed rubble masonary in

ordinary portland cement mortar 1:5 proportion in

foundation including curing etc. complete for all leads

Providing and laying plain/reinforced cement concrete

lining of M 15 (MSA 20 mm) in bed, side slopes and

curvature including batching, mixing, transporting,

placing, vibrating, smooth finishing, curing including

45 dewatering where required. 328.60 Sqmt 866.70

(MACHINERY BASED by "BATCH MIX PLANT &

TRANSIT MIXER" - WITHOUT PAVER MEMBRANE

20 cm thick lining in bed (MACHINERY BASED by

"BATCH MIX PLANT & TRANSITMIXER" - WITHOUT

PAVER WATER CURING)

Providing and fixing in position pre moulded asphalt

or bitumin cork board of approved quality and

specification as per design and drawing as directed.

B)20 mm Thickness

Manufacture, supply and erection of vertical gate

consisting gate leaf, stiffeners, rubber seal, embedded

parts as shown in drawings including cost if materials,

47 fabrication, painting, erection in position with all 2.00 No. 76856.63

accessories secondstage concreting etc complete as per

drawing and specifications.OPEN TYPE GATES : Gate

Size (1.75m X 2.35m)

Supplying i.e. Manufacture, Transportation and Erection of

Screw Hoist for Vertical Gate including Performance Test.

Manufacture, Supply and Erection of hand operated Screw

Hoist with Hoist plateform for operating the Vertical Gate

consisting of padestal, housing stem rod lifting nut, worm

and worm gear, thurst bearings, gate position indicator,

48 Fabricated Hoist plateform with all accessories, painting

second stage concreting with anchor bolts for hoist

plateform to enable the lifting stoping and lowering the gate

to ensure smooth and watertight operation ect. Complete as

per Drawings and Specifications. Gate Size

Manufacture, supply and erection of vertical gate

consisting gate leaf, stiffeners, rubber seal, embedded

parts as shown in drawings including cost if materials,

fabrication, painting, erection in position with all

accessories second

stage concreting etc complete as per drawing and

specifications.

OPEN TYPE GATES

Gate Size (1.25m X 2.3m)

Supplying i.e. Manufacture, Transportation and

Erection of Screw Hoist for Vertical Gate including

Performance Test. Manufacture, Supply and Erection of

hand operated Screw Hoist with Hoist plateform for

operating the Vertical Gate consisting of padestal,

housing stem rod lifting nut, worm and worm gear,

thurst bearings, gate position indicator, Fabricated

Hoist plateform with all accessories, painting second

stage concreting with anchor bolts for hoist plateform

to enable the lifting stoping and lowering the gate to

ensure smooth and watertight operation ect. Complete

as per Drawings and Specifications.

Gate Size (1.25m X 2.3m)

Manufacture, supply and erection of vertical gate

consisting gate leaf, stiffeners, rubber seal, embedded

parts as shown in drawings including cost if materials,

fabrication, painting, erection in position with all

accessories second stage concreting etc complete as

per drawing and specification.

OPEN TYPE GATES.

Providing & fixing in position structural steel /

chequered plate including fabrication by cutting

welding and one coat of red oxide both side etc.

Providing & Laying in position with Automatic

Batchmix Plant & Transit Mixer "DESIGNMIX" cement

concrete using cement sand and crushed aggregate for

C.C./ R.C.C work including necessary formwork,

centering, scaffolding, compaction by vibrator,

curingas directed with all lead & lift etc. complete

without dewatering and excluding the cost of steel

D) For Kerb / Wearing coat.

J) Concrete grade M-25 and MSA -10 to 20mm

SOR SG 2023-24, Ch-4-, Item No. 20 (D) (J)

Providing and fixing post and 40 mm dia pipe railing as

per detailed drawing including angle iron post of size

80mm x 50mm x 10mm (Height 1.2mt) fixed in C.C.

block (M-15 MSA20mm) of size 0.30 m x 0.30 m x

m etc. as per specifications including 3 coats of oil

painting to steel work and as directed etc. complete.

Dismentalling the existing stone masonry including

sorting out and stacking the useful materials and

removing the debries and making good the damage etc.

complete as directed.

Providing and fixing in position (different diameter)

I.S NP3 class reinforced pipe with caulking the joints

with cement mortar 1:1 proportion using jute string

soaked in cement

slurry, finishing joints, and laying pipes to the designed

grade and levels, curing etc. complete for all lead and

(g) NP3 class 1200mm dia pipe.

Manufacture, supply and erection of vertical gate

consisting gate leaf, stiffeners, rubber seal, embedded

parts as shown in drawings including cost if materials,

57 fabrication, painting, erection in position with all 4.00 No. 55577.97

accessories second stage concreting etc complete as

per drawing and specifications.OPEN TYPE GATES(42)

Supplying i.e. Manufacture, Transportation and

Erection of Screw Hoist for Vertical Gate including

Performance Test. Manufacture, Supply and Erection of

hand operated Screw Hoist with Hoist plateform for

operating the Vertical Gate consisting of padestal,

housing stem rod lifting nut, worm and worm gear,

thurst bearings, gate position indicator, Fabricated

Hoist plateform with all accessories, painting second

stage concreting with anchor bolts for hoist plateform

to enable the lifting stoping and lowering the gate to

ensure smooth and watertight operation ect. Complete

as per Drawings and Specifications.

Manufacture, supply and erection of vertical gate

consisting gate leaf, stiffeners, rubber seal, embedded

parts as shown in drawings including cost if materials,

59 fabrication, painting, erection in position with all 2.00 No. 47783.72

accessories second stage concreting etc complete as

per drawing and specifications.

OPEN TYPE GATES

Supplying i.e. Manufacture, Transportation and

Erection of Screw Hoist for Vertical Gate including

Performance Test. Manufacture, Supply and Erection of

hand operated Screw Hoist with Hoist plateform for

operating the Vertical Gate consisting of padestal,

housing stem rod lifting nut, worm and worm gear,

thurst bearings, gate position indicator, Fabricated

Hoist plateform with all accessories, painting second

stage concreting with anchor bolts for hoist plateform

to enable the lifting stoping and lowering the gate to

ensure smooth and watertight operation ect. Complete

as per Drawings and Specifications.

Clearing the canal land width including removing the

shrub, bushes, cactus, weeds other vegetation

including cutting down trees upot 0.50cm girth and

depositing the removed materials outside the canal

land width up to lead of 50 meter as directed etc.

complete.(Without water pool)

Dismentalling the existing R.C.C.pipes of the following

diameter including sorting out and stacking of the

62 useful materials including refilling the trenches etc. 60.00 M 873.90

complete as directed. (NP-2 pipes) (c) 650 mm to

Excavation of canal/drains in all sorts of soils (dry

condition of soil) including depositing the excavated

stuff in uniform layers in canal bancks or in spoil banks

or as and where directed including dressing the canal

section upto lead of 50 meter and lift including clearing

the site etc. complete (By machinery for canal/drain

maintanance) (upto 1.5 cumescs capacity of

Providing and laying plain/reinforced cement concrete

lining of M-15 grade in bed, side slopes and curvature

including batching, mixing, transporting, placing,

64 smooth finishing, curing including dewatering where 36719.00 Sqm 390.40

required.(with machinery based with paver)

(d) 7.5 cm thick lining in Bed & slope, (With membrane

Total Cost (Rs.)

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should be

written in igures and words) of the estimated rate mentioned above. Amount of my /our tender

works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Contractor Executive Engineer