Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Fee/PreQual/Technical/Finance | -18.22% | ₹1.2 Cr | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.2 Cr+₹3.1 L (2.58%)Admitted-Fee/PreQual/Technical/Finance ARYASAMAJ BELONIA SOUTH TRIPURA PIN 799155 | BELONIA | SOUTH TRIPURA | TRIPURA | 799155 | -16.11% | ₹1.2 Cr+₹3.1 L (2.58%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹1.3 Cr+₹8.2 L (6.93%)Admitted-Fee/PreQual/Technical/Finance BC NAGAR BELONIA SOUTH TRIPURA PIN 799155 | BELONIA | SOUTH TRIPURA | TRIPURA | 799155 | -12.55% | ₹1.3 Cr+₹8.2 L (6.93%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹1.3 Cr+₹10.5 L (8.82%)Admitted-Fee/PreQual/Technical/Finance | -11.01% | ₹1.3 Cr+₹10.5 L (8.82%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
| 5 | L5₹1.6 Cr+₹39.5 L (33.3%)Admitted-Fee/PreQual/Technical/Finance VILL SN PALLI BELONIA SOUTH TRIPURA PIN 799155 | BELONIA | SOUTH TRIPURA | TRIPURA | 799155 | +8.99% | ₹1.6 Cr+₹39.5 L (33.3%) | L5 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹1.5 Cr
EMD Value
₹2.9 L
Closing Date
3 Sept 2026, 3:00 pmClosed
Executive Engineer
O/O. the Executive Engineer, PWD(RandB) Belonia Division, South Tripura
Stone grouting, Patch metalling, Carpeting and other allied works.
2026_CEPWD_76378_1
107/NIT/SEIII/R/PWDRandB/26-27
Open Tender
Civil Works - Roads
Percentage
180 days
Belonia Municipal Council area
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,000
₹2.9 L
8 Sept 2026
28 Aug 2026
3 Sept 2026
28 Aug 2026
3 Sept 2026
28 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Maintenance of bituminous surface road
Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm B.M, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specification Clauses 1900, 502, 503 and 504. | - | Cum | - | - |
| 2 | WBM Grading 3
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405.
I. By Manual Means | - | Cum | 7,848.3 | - |
| 3 | Prime Coat
Medium porosity
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.20 kg/sqm using mechanical means as per MoRD Technical Specification Clause 502. | - | Sqm | 91.46 | - |
| 4 | Tack Coat
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per MoRD Technical Specification Clause 503. | - | Sqm | 23.5 | - |
| 5 | 25 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) Binder
Providing, laying and rolling of open graded premix carpet of 25 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.
A. Case - II By Mechanical Means
i) Bitumen of VG-30 | - | Sqm | 414.71 | - |
| 6 | Seal Coat
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.
A. By Manual Means
i) Case - IV : Type D (premix with fine sand)
a) Bitumen of VG-30 | - | Sqm | 78.56 | - |
stage.html
html • 0.02 MB
finance_77750.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.84 MB
DNIeT107.pdf
Tender Documents • 2.50 MB
BOQ_77750.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .