Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC | L1 | Accepted-AOC Society bears 10 percent concession | |
| 2 | L2₹1.8 L−₹9,556.04 (5.15%)Rejected-Finance | L2 | Rejected-Finance Low quoted rate | |
| 3 | L3₹2.2 L+₹32,935.07 (17.7%)Rejected-Finance | L3 | Rejected-Finance High rate |
| Sl No | Description | Qty | Unit | SAINUDEEN P T L1 | KOZHIKODE JILLA LABOUR CONTRACT AND CONSTRACTION CO OP SOCIETY LTD L3 | OMASSERY LABOUR CONTRACT SOCIETY L2 |
|---|---|---|---|---|---|---|
| 1.00WALL CABINET INSTALLATION | ||||||
| 1.00 | 12.45.1:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 | 36 | sqm | 1,255.6 ₹45,201.6 Lowest | 1,500 ₹54,000 | 1,323.79 ₹47,656.44 |
| 1.00 | 50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge. | 24.33 | sqm | 2,374.9 ₹57,781.32 Lowest | 3,000 ₹72,990 | 2,503.84 ₹60,918.43 |
| 1.00 | 9.127.2:Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick | 19.05 | sqm | 806.3 ₹15,360.02 Lowest | 1,000 ₹19,050 | 850.06 ₹16,193.64 |
| 1.00 | 9.165.3:Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.75 mm | 18 | no | 53.1 ₹955.8 Lowest | 75 ₹1,350 | 55.93 ₹1,006.74 |
| 1.00 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | 16 | set | 381.7 ₹6,107.2 Lowest | 550 ₹8,800 | 402.4 ₹6,438.4 |
| 1.01 | 9.157.1:Providing and fixing Pre-laminated medium density fibre board IS:14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing laminaion exterior Grade-I MDF Board 18mm thick confirming to IS:14587. | 13.44 | sqm | 1,356.7 ₹18,234.05 Lowest | 1,600 ₹21,504 | 1,430.35 ₹19,223.9 |
| 1.01 | 26.11:Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : | 30 | no | 118.3 ₹3,549 Lowest | 150 ₹4,500 | 124.67 ₹3,740.1 |
| 1.01 | OD386949/2024-2025:Providing and fixing Plastic Rubber Table Bushes for Furniture including fixing etc. complete. | 12 | no | 94.9 ₹1,138.8 | 60 ₹720 | 46 ₹552 Lowest |
| 1.01 | OD386954/2024-2025:Supplying and fixing Outside mount Double Layer printed rolling Zebra blind polyester window curtains including all fittings | 6 | sqm | 3,382.8 ₹20,296.8 | 1,600 ₹9,600 | 1,451.88 ₹8,711.28 Lowest |
Tender Value
₹1.9 L
EMD Value
₹4,640
Closing Date
3 Apr 2025, 4:00 pmClosed
SAFEEDA NP
Office of AE, Mukkam municipality
ANNUAL PLAN - PRO.NO- 643/24-25 NEELESWARAM SCHOOL OFFICE IN DIVISION 32 - MUKKAM MUNICIPALITY
2025_LSGD_755350_12
09/2025/AE/LID-EW/MKM
Open Tender
Civil Works - Others
Item Rate
180 days
Mukkam municipality
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,640
Yes
16 Oct 2026
28 Mar 2025
5 Apr 2025
28 Mar 2025
3 Apr 2025
28 Mar 2025
Amount
WALL CABINET INSTALLATION
12.45.1:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.
9.127.2:Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
9.165.3:Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.75 mm
9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.
9.157.1:Providing and fixing Pre-laminated medium density fibre board IS:14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing laminaion exterior Grade-I MDF Board 18mm thick confirming to IS:14587.
26.11:Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :
OD386949/2024-2025:Providing and fixing Plastic Rubber Table Bushes for Furniture including fixing etc. complete.
OD386954/2024-2025:Supplying and fixing Outside mount Double Layer printed rolling Zebra blind polyester window curtains including all fittings
OD386964/2024-2025:Supplying and fixing 30mmstainless Multi Drawer/Cabinet lock and key (Matt finish)
OMASSERY LABOUR CONTRACT SOCIETY (BID ID -2182176)
KOZHIKODE JILLA LABOUR CONTRACT AND CONSTRACTION CO OP SOCIETY LTD (BID ID -2185639)
Bidder Name
KOZHIKODE JILLA LABOUR CONTRACT AND CONSTRACTION CO OP SOCIETY LTD
SAINUDEEN P T
OMASSERY LABOUR CONTRACT SOCIETY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .