CERTAIN MISC B-R AND E-M REPAIRS TO MD ACCNS AT YOGENDRA YADAV VIHAR UNDER GE NORTH BINNAGURI

Amount

Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm each but n. exc 2 Sqm each and removing from the site complete all as specified and as directed.

S&F for pressed steel frames for doors with one or more rebates including provisioning of necessary supply and fixing, lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm incl one shop coat of priming complete all as specified and as directed.

S&F for pressed steel frames for doors with one or more rebates including provisioning of necessary supply and fixing, lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm incl one shop coat of priming complete all as specified and as directed.

S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F of factory made 35mm flush shutter, solid coarse construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.

S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed. Note : The manufacturing test certificate (MTC) is to be provided and authentication certificate/Logo/hologram/barcode of the make/manufacturer must be there on the product.

Easing of door shutters (area n exc 2.00 sqm) for properly closing/opening, tighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc with out taking down complete all as specified and as directed.

Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening incl taking down complete all as specified and as directed.

M&L in repair for 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F 100 mm butt hinges stainless steel complete all as specified and as directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

S & F Hasp and staple, Aluminium anodised of size 125 mm, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F of Stainless steel butt hinges, medium weight of size 100mm complete all as specified and as directed.

Supply & fixing aluminium anodised extruded fabricated type handle 150mm long complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F steel window with side hung shutters incl. projecting type hinges with steel handles steel peg stay fixing lugs complete with glazing bar 10 cm devetailed or welded incl one shop coat red oxide primerd Drg no. CESZ/2018/TD-07 Sheet no. 1 to 3 incl taking down of old steel windows of any size complete all as specified and as directed.

Description all as per Item No. 21 above but without glazing bars complete all as Specified.

S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars Drg no. CESZ/2018/TD-07 Sheet no. 1 to 3 incl taking down of old steel ventilators of any size complete all as specified.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; fixed type window frame , door chowkat, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for cleaning of new pre-primed steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

Supply & fixing 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:6) including rounding the exposed surfaces of granite complete all as specified and as directed.

All as per item no 36 above but as in skirting ( 12 to 15 mm thick) but on 10 mm thick rendering/ back coating in CM (1:4) complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface/dado of size 450x350x7mm/300x600x7-8mm thick set and jointed in neat cement slurry and pointed white or colour cement to match complete all as specified and as directed.

M &L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 as complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks of class designation 75 straight or curved on plain exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Description all as per Item No. 43 above but without bricks complete all as specified and as directed.

Taking down cement plaster on wall of any description incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm thick & 5mm thick each) mixed with water proofing compound in top layer 200ml per bag of cement or as per manufacturer's instructions finishing the surface fair & even complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) complete all as specified and as directed.

M&L for rendering 15 mm thick plastering in Cement mortar (1:6) on fair/unfair faces of brick masonry finished even and fair complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed.

M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for one coat of acrylic distemper on old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for one coat of white wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

Material & labour for PCC (1:3:6) Type C-2 (20 mm graded aggregate) as in plinth protection incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified and as directed. (Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.)

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 20 mm bore complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand etc complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F vitreous china squatting pan"Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and as directed.

Supply & fixing in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and as directed.

S & F in repair grating doom 125mm dia with or Without waste hole of PTMT (min wt 40 gms) complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down PVC pipe of any dia incl all fittings complete all as specified and as directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, and railings , newels, balustrade & the like complete all as specified and as directed.

Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

S& F in repair 25 mm dia PVC coated MS curtain rod with require brackets, decorative peace on ends with teak finish appearance as in repairs complete all as specified and as directed.

S & F Extra over item of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

Supply and fixing in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and as directed .

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge width of aperture 1.40mm including taking down of old existing window of any description and making good disturbed surface of wall complete all as specified and as directed.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, padding on roof (where ever required) etc complete all as specified and as directed.

M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down carefully existing old/unsv sub main wiring of any size/description as existing at the site including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and as directed for one Light point controlled by one, one way switch

Description all as per item No 92 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

Description all as per item No 92 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 92 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

Description all as per item No 92 here in before but for one bell point controlled by one, bell switch 5 Amps

Description all as per item No 92 here in before but for one light point controlled by one, two way switch 5 Amps

Description all as per item No 92 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F switch piano single pole flush type 5 amps, 230 volts.complete all as specified and directed.

S & F switch piano single pole flush type, two way, 5 amps, 230 volts.complete all as specified and directed.

S & F bell push flush type 5 amps, 230 volts.complete all as specified and directed.

S & F socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts all as specified.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

S & F in replacement MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.

S & F in replacement MCB SPN 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps complete all as specified.

S & F in replacement MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB's all as specified.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with and taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. complete all as specified and as directed. (NOTE : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’. (ii)Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length).

All as per item No 113 above but using two run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

Supply and fixing Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 security light fitting luminaries with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.

S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate of SSR part-I 2009 connected to down Conductor all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 40 mm dia of light grade, for protection of earth strip including testing and dismantling of old one, complete all as specified and directed. Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate.

M/S SHYAM ENTERPRISE (BID ID -3466291)

M/S Pradeep Enterprise (BID ID -3467997)

ANIL ENGINEERING CO (BID ID -3467741)

SS SHARMA (BID ID -3467255)

Biswanath Sharma (BID ID -3467751)

M K Engineering WOrks (BID ID -3465552)